Beaudry Power Hammer Machining Part 1

No video

Beaudry Power Hammer Machining Part 1

Рет қаралды 115,971

Күн бұрын

This was a collaboration job ‪@WillStelterbladesmith‬ & Kevin Willey. Both Will and Kevin were looking to turn the spindles in their Beaudry No. 11 & No. 2 Power hammers and have new spindle bearings machined. Since Will had plans to come to Florida he decided to drive down and brought all the parts with him so we could work on them during his return leg of the trip. In this video we'll set up both of the spindles in the American Pacemaker lathe to get them turned true and straight. In Part 2 we'll machine both of the bronze bearings to match the new diameter of the spindles.
#beaudry #beaudrypowerhammer #machineshop #abom79
Paypal Channel Donation: www.paypal.com...
Support though Patreon: / abom79
My Amazon store where I'm adding many of the tools and products I use in my own shop. Amazon.com/shop/abom79
Visit my second KZfaq channel where you can follow our travels, camping, RVing, cooking, and bbq! ‪@AbomAdventures‬

Пікірлер: 299

@bbzecker5921 Жыл бұрын

Adam, following you for a couple of years now, doing all this awesome things and taking the time to explain what you're doing, there's a teacher in you. Seeing you interact with Will and taking the time to explain it all with clarity... there's a treasure of knowledge and passion there. Keep going!

@seansysig Жыл бұрын

Wills excitement on the surface finish was refreshing to see his level of appreciation for your talent. Adam you make it look so easy, but decades of sweat, brains, and love of the craft are showing!

@jamiemorgan4146 Жыл бұрын

This is what I love about the community. The strong connection and help that’s passed on to younger and older.

@greenbudkelly2820 Жыл бұрын

It’s always a joy to watch Adam work. He takes such pride in his craft and clearly still gets a thrill from fundamental machining. Will looks like a sharp kid.

@craignelson6113 Жыл бұрын

Watching this video I saw that kid in me, I'm 77 now. . . . My how fast that time went by. . .

@stevewineland9422 Жыл бұрын

Best part is watching the instruction, and Will's excitement at learning.

@travisb.8005 Жыл бұрын

You have a wonderful KZfaq channel Abom79. You bring us sanity to this crazy world we live in.

@scottklein4844 Жыл бұрын

It’s easy to forget how talented and knowledgeable Adam is until you see him work with a young person who [knows way more than me but] seems a little clumsy and awe struck. Yet Adam is humble and makes the kid feel smart and welcome. Then you realize that’s what Adam’s been doing with us this whole time. He knows we don’t know anything about machining but makes us feel like we do.

@jc1505 Жыл бұрын

I think your in your element, the pacemaker is a beautiful machine and it takes a man who knows what he doing to run right. Your the man!

@enderxzebulun 18 күн бұрын

I love the kid doing his best to talk shop

@millzee60 Жыл бұрын

Absolutely fantastic to see you help a young lad who wants to do this kind of stuff rather than twiddle his thumbs on a play station.

@imbok Жыл бұрын

It's great to see the American Pacemaker being used for a job it is so well suited for. Nice!

@glennford8844 Жыл бұрын

Yes indeed! Be equally nicer in my shop. Ha ha.

@yambo59 Жыл бұрын

More like the old days of "saturday night special" - great video

@GAS1950 Жыл бұрын

Adam I sure like seeing you use the chuck wrench I made for you 😀😀😀😀

@jameskilpatrick7790 Жыл бұрын

Using an antique lathe to repair an even older power hammer. I love how those great old tools can just keep going and going with the right tlc. Just wonderful to see.

@bigmotter001 Жыл бұрын

WOW I love that monster lathe! Adam, you have some great toys and you know how to make them all sing in harmony! Thanks for all you do for this community and take care!! John in Florida.

@justmeva Жыл бұрын

It amazes me how the KZfaq family comes together to work and help each other out.

@harlech2 Жыл бұрын

Seeing two of my favorite creators and inspirations 'collad' is simply awesome!

@SkylersRants Жыл бұрын

I enjoyed seeing the two of you interact. Thanks.

@jwdickinson643 Жыл бұрын

Will, you found absolutely the BEST machinist East of the Mississippi!

@mattpage9826 Жыл бұрын

I love the community of you guys. two guys from oppisit sides of a continent helping each other. This is amazing.

@phildegruy9295 Жыл бұрын

I agree with Will. I think you should become a machinist. You are really good at it! 😀

@PhilRable Жыл бұрын

Adam you should do this for a living - classic 😅

@andrewruble7706 Жыл бұрын

Adam I have learned you know your stuff when it comes to the machining but man you have a knack with people and teaching. Well done. Very enjoyable project to watch.

@waikanaebeach Жыл бұрын

Good to see the Pacemaker in operation. It runs smooth

@glennford8844 Жыл бұрын

As a baby's bum. Quality plus as usual; if it's USA made.

@crossbowhunter9118 Жыл бұрын

It is cool seeing a young man getting in the art of knife making. I pictured a old man wanting this work done.

@ronjones-6977 Жыл бұрын

Will worked with an "older" guy for a while named Alec Steele. Both of them are absolute ARTISTS. (Alec is 25. Two whole years older than Will.) Both of them have fantastic KZfaq channels.

@howardfluty566 Жыл бұрын

I really enjoy watching you work. I am not a machinist but my dad was a master machinist who began working as an apprentice at the Washington D.C Navy yard in 1940. He retired in 1978 . I picked up enough from him however to understand and follow what you are doing and did get to see him at his job a couple of times. I still have his tool box from when he retired and most of the tools he left in it. If he were still here I am sure that he would enjoy watching your channel.

@rossilake3430 Жыл бұрын

If anybody knows how to machine a Giant shaft, It’s Adam Booth. The Pacemaker never fails to impress. Big Tools for a BIG MAN! Love your new shop.

@crossbowhunter9118 Жыл бұрын

That is what she said

@derekkinsella2343 Жыл бұрын

This great to see you guys all calibrate together and learn off each other ,not like other youtube channels all in competitions with each other ,Great video guys thank you 💯👍💙

@matthewsykes4814 Жыл бұрын

There are good machinists and very good machinists and then there is you. You can see Will's amazement at just how fast you centred the part, that blew his mind and then the surface finish..... I do take a small issue with the hoodie he was wearing around a high speed lathe but that's just me. I reckon Will learned a lot about just setting up a piece properly in the lathe, he's learned from the best. I love the sound of the pacemaker running up.... big heavy induction 3 phase, yes please....🙂

@mikedyson7330 Жыл бұрын

I love manuel machines and the skill to run them .thanks Adam

@gregdennis3523 Жыл бұрын

These one of a kind projects are the reason I watch Adam. You can see the generations of skill that he puts into every piece.

@alanjackson4397 Жыл бұрын

He seems like a very nice young man and very appreciative

@tonymannion5743 Жыл бұрын

This is classic ABOM working the big stuff with ease. Hope there's more to come.

@silasmarner7586 Жыл бұрын

Well, I think he equpped this shop just for that purpose... And his hardcore content lately has been on the up"swing" .. so hopefully the grousing peanut gallery are silenced onced and for all

@l0nemonk100 Жыл бұрын

I had recommended Abom to them years ago when they had first got their shop open in Montana. I'm glad they finally got together on a project. Both are craftsman!

@sparkplug1018 Жыл бұрын

Always amazing seeing these older machines still turning out parts. They sure knew how to build them. Can't even imagine how many parts this lathe and those power hammers have made over the years.

@tacfoley4443 Жыл бұрын

It is always a delight to see you working, Mr B. And helping out a fellow craftsman is THE way to go.

@scruffy6151 Жыл бұрын

Good to see the joy on Will face as the finish of the shaft comes to life.

@Michael-nu1py Жыл бұрын

I like the fact the young man asked questions that’s how you learn

@Grandwigg Жыл бұрын

That's what i like a lot about watching Will. He seems to thrive on finding people to learn from.

@Grandwigg Жыл бұрын

Loved the work with Will. It's great seeing folks I like doing things together.

@daddynichol52 Жыл бұрын

This was a very smart, educational and entertaining video, Adam. Will asked great questions and you are an excellent instructor. Abby captured it all quite nicely.

@peterhaan9068 Жыл бұрын

You can bet that trucker new exactly what he was doing! Welcome to on the road and old time truckers in general.

@kurtarmbrust Жыл бұрын

Great to see you passing on your knowledge to the younger guys.

@AJsWargaming Жыл бұрын

Collaboration between two of my favorite KZfaqrs - well done Adam and Will

@michaelkoch2109 Жыл бұрын

It's good to get to know each other. It's good to help each other. It's good to share experiences. It's good to learn from each other! 👍🛠❤😎

@PhilG999 Жыл бұрын

Been following him and Steele for years! 😁

@arjanvanraaij8440 Жыл бұрын

All the novice questions and explaining by Adam, Love it

@kennethgilbertdds7249 Жыл бұрын

He's not kidding. It's hard to find a good machinist. Thanks Abom.

@BravoCharleses Жыл бұрын

In my limited experience, industry has a gazillion great machinists, but finding a shop that will take annoying little jobs from a home gamer really is hard to find!

@trxcummins7388 Жыл бұрын

After watching this video it's one of my favorites Adam and Will or both phenomenal people and I hope they do more collaborations in the future

@tomoakhill8825 Жыл бұрын

WILL: I have been watching Adam for 12 years. He _always_ indicates to one thousandth,

@patrickirish9427 Жыл бұрын

First job I did as an apprentice when I started was to make new piston rings for a steam driven power hammer in our very old shop (we have steam as we have a turbine in our steel mill). We turned and bored them then parted them off and split them. We then used the proper sized dowel, hung them on the rod and heated with a torch until yellow and annealed them. Turned the cast iron flexible and opened the split gap to the right size. Was a really cool first job. Diameter of the rings were about 18".

@glennford8844 Жыл бұрын

He's a nice kid, he loves the work!

@RobertGracie Жыл бұрын

The perfect video to completely relax to and watch on a 4K screen!

@V8freaks Жыл бұрын

with a 1080p video....

@georgegeller1902 Жыл бұрын

Good for another hundred years.

@enpeemac Жыл бұрын

One of the most enjoyable videos to watch from the channel for a long time. I think we saw a little more of the real Adam here, and it was all good! Loved every second and hope to see more of this type of content in the future.

@AllenCavedo Жыл бұрын

That Pacemaker is a beast! GoPro shutter LED lighting mismatch.

@a.bakker64 Жыл бұрын

You look so good on these manual machining projects. I saw his video about this item about two weeks ago. Nice job Adam 👌🏻

@ValiRossi Жыл бұрын

Great to see the big lathe run so well.

@donaldburg7532 Жыл бұрын

Abom79,, That is your new Apprentice, best video ever!!

@paultennis9414 Жыл бұрын

Great videography from Abby as usual!

@apt40444 Жыл бұрын

Love the crossover.

@davidhall1779 Жыл бұрын

love watching Wills cHannel Adam what a fun guest to Have visIt the shop for a bit of much needed repair.

@wags9777 Жыл бұрын

I find it distracting and sometimes frustrating when people want to talk to me when I'm machining. You are a true professional .

@knucklehead0980 Жыл бұрын

Great to help out the youngsters

@ronnydowdy7432 Жыл бұрын

I finally got to see some chips. Enjoyed the show

@TexDrinkwater Жыл бұрын

"It's hard to find a good machinist." Truer words have never been uttered. And it's even harder to find a good tool & die maker.

@buckhorncortez Жыл бұрын

Hey...it's had to find a good barber...doctor...teacher...you name it...

@thatrealba Жыл бұрын

Been looking forward to this vkdeo ever since I saw Wills version.

@TheAyrCaveShop Жыл бұрын

Nice collaboration project, good to see both of you enjoying the project.. Love that finish from the pacemaker 👍👍

@geckoproductions4128 Жыл бұрын

Cool beans guys. I hope we get to see them in action after they're repaired

@alvarogeorgenobregeorge69 Жыл бұрын

Greetings everyone from Brazil.

@annwitzel9630 Жыл бұрын

So cool to see the pacemaker working , awesome video .

@richardkelleher1711 Жыл бұрын

I went to school in Bozeman, Montana State. That was where I first ran a metal lathe and a vertical mill. MSU had a great Industrial Arts department back in the 70's. That was when they were training the next generation of shop teachers. Sadly, I'm sure, most of the shop classes were cut, like elsewhere in the country, because people couldn't see spending that much on educating young people.

@richardfrisbie6069 Жыл бұрын

Great video!

@glennford8844 Жыл бұрын

He's a great kid. Great that you could help him out.

@danh.4995 Жыл бұрын

I've been away from the channel for a bit but I have to say I really enjoyed this two part series.

@talexb Жыл бұрын

(Thinks, Oh, hey, Adam's finally going to use the American Pacemaker.) (Thinks again, Hmm, I guess I've been watching these videos a really long time if I can immediately name one of his lathes.) Great stuff -- the young man sounds so thrilled about the excellent job you've done. Nice.

@Badgermatt-nc5nr Жыл бұрын

Will just seems like an awesome young man.

@donaldwalker3738 Жыл бұрын

Can't wait for second installment.

@KS-cp6bj Жыл бұрын

I had one of those lot lizards beat on the door of my truck for two hours. I finally had to let her out.

@rogerrichardsonjr7818 Жыл бұрын

😂😂

@TheUncleRuckus Жыл бұрын

😆🤣😆🤣😆🤣

@fmolds Жыл бұрын

I like this video, watching Abom operate the mill is a treat . The close ups we usually see are great , but seeing him move around is cool too .

@jeffh6971 Жыл бұрын

So cool to see you and Will Stelter on a project!

@jimmyboles3409 Жыл бұрын

Love that pacemaker action👍 Good content, thanks Adam!

@edsmetalworks8426 Жыл бұрын

Good to see the Pacemaker in action!

@ReinierKleipool Жыл бұрын

Adam, Will, What a beautiful video and encounter of good friends! And on top of that HUGE axles in the Monarch for the first time! Best video in a long time. I hope this signals the return of the old days at Abom79! I for sure keep watch both your channels.

@trxcummins7388 Жыл бұрын

I've always known this but if you watch this video really good you can see the focus and passionate Adam has for his work

@tomoakhill8825 Жыл бұрын

OMG! At 17:00 Adan tells us that this ancient American Pacemaker is _still_ dead nuts accurate. The center is still on. Who were these people that built that lathe? They were Americans and they built unsurpassed machine tools, like this one. Amazing. Of course all of the users over the decades had to respect this tool, but really: This. Is. Amazing.

@guygfm4243 Жыл бұрын

I love you Adem just so good content. Love to see you in your own shop. You have come along way from when I first started watching you.well done

@philstarr6332 Жыл бұрын

You're 100% correct. it's hard to find a good machine shop.

@steveanderson4768 Жыл бұрын

Friend of mine’s a retired machinist from Norfolk Naval shipyard 46 years been there done that seen that when he retired, they called him back three times asking him how to do stuff. What can you expect from the government?

@bennyharper862 Жыл бұрын

Awesome! Help the youngsters.

@cameronmccreary4758 Жыл бұрын

Nice work and finish; attention to detail and tolerances.

@BruceBoschek Жыл бұрын

Lots of useful information on cleaning up shafts. Thanks for sharing this.

@CA10Z Жыл бұрын

It's good to see your video crew.

@stephensmith8756 Жыл бұрын

G'day Adam As much as I love seeing big Monarch's cut 1/2" of each side of a workpiece, watching your American Pacemaker is a joy as well. What amazing machines came out of Cincinnati, OH ? I have a Scots lathe, a John Lang I'm working on, and it's a good bit of gear, but when I watch that Pacemaker, I'm just in awe. Thanks

@derfnosdivad4841 11 ай бұрын

came for the machining stayed for the free shipping.😆 Will+Adam=amazing

@rohanhooker5195 Жыл бұрын

Great vid Adam. Looking forward to part2

@stevebumstead9840 Жыл бұрын

Great video Adam, thanks.

@derekblake9385 Жыл бұрын

You are Very nice chap Adam, hello from the UK

@scrappy7571 Жыл бұрын

Cool to see the Monarch finally in action.

@robsdeviceunknown Жыл бұрын

I don't even care much about blacksmithing but i follow Will and watch his videos. Because he's such a good patriotic intelligent young man. He deserves everthing and i hope he gets it.

@D3vtsb Жыл бұрын

Why is patriotism a good quality to have?

@brettbuck7362 Жыл бұрын

@@D3vtsb Foreigner, I take it?

@digitalradiohacker Жыл бұрын

@@brettbuck7362 Its the new fad - To hate the country you were born in is the "in" thing now. To berate your people, undermine them at every turn, and hold the entire nation back with your protesting is considered "progress" nowadays.