Thank you very much! 😊 I am sure you will make a beautiful piece of jewelry! 🥰

Hi, I have a notification, but I can't find your question. That's why I'm answering here. The size of the square cutter is 45x45 mm, the pendant is 45x32 mm. 😊

Thank you very much! I love this pattern too 🥰

Thank you very much! 🥰

Thank you very much :-)

Thank you very much! 😍

Thank you very much! 😍

Thank you very much! 🙂

Большое спасибо! 🙂

Thank you very much :-)

Thank you very much :-)

Agree….

Thank you very much! I will be happy if you visit my channel again :-)

Thank you very much :-)

Thank you very much! :-)

Thank you very much :-)

Thank you! 😊

Thank you very much! :-)

Thank you very much! And thank you for subscribing :-)

Thank you very much! 😍 I used "FIMO Effect" metallic gold colored clay. 🙂

Thank you very much and I'm so glad you found the video useful :-)

Thank you very much 🙂 Unfortunately, the availability of products online is constantly changing. Try the links below, these are available. www.metalclay.co.uk/magic-glos-large-177-4ml-6oz-lisa-pavelka-signature-series/ www.hobbyland.eu/eng/shop/lisa-pavelka-magic-glos/p-14761/

Thank you very much! The choker can be purchased here www.aliexpress.com/item/32889350591.html?spm=a2g0o.order_list.0.0.21ef1802Jn3pk1 I bought the glue bail in a hobby shop here, but I think you can also get it on AliExpress.

Thank you very much. Yes, I used the "Loctite Super Attak Precision" glue, unfortunately only the cap is visible in the video

Thank you! 😊 For the Lisa Pavelka Magic Glos resin, I use a 4x9 watt UV lamp (not LED). The 9 watt is also good, but then the curing time is longer.

Thank you very much! 🙂 I bought the hanger for the pendant at a local store. Unfortunately, I haven't been able to buy it again since then. 😢 If I find it somewhere I will share the information with you. 🙂

@@aginekojewelry thank you! I follow you religiously! I love your work❤️

Thank you very much! You can buy the necklace wire here: www.aliexpress.com/item/32889350591.html?spm=a2g0o.order_list.0.0.21ef1802Jn3pk1

@@aginekojewelry thank you!

The texture sheet is from cooltools (www.cooltools.us). Its code is TTL-107 :-)

@@aginekojewelry GAD ZOOKS!!!!! I'm in texture sheet heaven! 'Cool Tools' is gonna be getting my art's allowance for the next two months!

Hello, Thank you very much! 🥰 The fresh PREMO clay contains a lot of softening (oily) substances, which causes the colors of the mica powder to change slightly and become duller. That's why I tend to use FIMO clay for these projects. Of course, this is just my experience... 🙂

Thank you @@aginekojewelry

The choker can be purchased here www.aliexpress.com/item/32889350591.html?spm=a2g0o.order_list.0.0.21ef1802Jn3pk1 This connector must be glued to the back of the pendant, I usually use "Loctite" glue. I bought the glue on bail for pendant in a hobby shop in my city, but I think you can also get it on Amazon or AliExpress. You can also use this: www.aliexpress.com/item/32420453043.html?spm=a2g0o.productlist.main.71.b4ee569eKSNXwr&algo_pvid=f4fd9323-a5e4-4b22-a7d9-fcca90105b98&algo_exp_id=f4fd9323-a5e4-4b22-a7d9-fcca90105b98-35&pdp_ext_f=%7B%22sku_id%22%3A%2210000013983209359%22%7D&pdp_npi=3%40dis%21HUF%21952.12%2137.05%21%21%21%21%21%40211bd4cd16759788565591066d06f7%2110000013983209359%21sea%21HU%210&curPageLogUid=ksSSXn67E1sI

Thank you! 🙂 In this video, I didn't use a clay release agent on the texture mat because the pattern wasn't very deep. But when the pattern is deep, I usually use baby powder (on the clay). I covered the clay with a cleaning wet cloth for rolling, the type is as follows: www.af-net.com/products/workspace-cleaning/mtw025p_mobile_technology_cleaning_wipes/ You can use any other type of wet wipe. This way, the clay will not stick to the roller and you can make a nice print. FIMO vs Premo: In general, I prefer Premo, but I found that when using mica powder techniques, the colors turned out better on FIMO. There is still a lot of softening material in fresh Premo, which many people reduce by placing it on paper sheet. I think because of the softener, the colors of the mica powder don't stay as beautiful. It is possible that the mica powders behave differently on older Premo, since it is already harder. Perhaps that this is only my experience, and if the colors stay nice on your Premo, then continue to use it! 🙂

@@aginekojewelry thank you so much for your helpful, detailed reply! I love your technique!❤️

@@aginekojewelry I found that the Mica Powder colors are much more muter than yours. Now I know why - I used Premo

Yes, you see right. 😊 "Inka Gold" is a brand name, available in many colors. You can find information about the product here: www.viva-decor.com/en/paints/effect-paints/gloss-effect/183/inka-gold-62-5-ml-20-colors

@@aginekojewelry thank you, so much😊

Il link ai materiali si trova nel campo descrizione sotto il video. Queste informazioni dovevano essere valide quando è stato realizzato il video, ma da allora, sfortunatamente, potresti dover acquistare il prodotto altrove. (Tradotto con google traduttore.) The description box below the video contains the link to access the materials. This information must have been good when the video was made, but since then, unfortunately, the product may have to be purchased elsewhere. 😊

Thank you very much. I bought the mica powders on AliExpress and I used these colors: darker and lighter blue, darker and lighter green, red, bronze-brown and gold. This is the link: www.aliexpress.com/item/4000967612233.html?spm=a2g0o.order_list.0.0.21ef1802c0d8qc

You can buy it here: cooltools.us/collections/textures-cool-tools-brand-products/products/texture-tile-hibiscus-embossed?_pos=1&_sid=b1c5e5d0c&_ss=r 😍

Oh, I'm so sorry, that's really frustrating. 😔 Have you sent it back yet? Does the error also appear on the texture pad? If the pattern is fine, then try rolling the clay on it very strongly. (Use a little baby powder to separate the clay from the texture pad.) This is a beautiful pattern, it would be hard to find a similar one... 🙂