Man... Soo many parts, washers... I don't understand why Campagnolo can't make stuff more simple... Like FSA, SHIMANO,SRAM I totally understand the guy switching to Shimano 😅

Love watching this fella make this look easy. Last time I changed a tyre it too hours. Great craftsmanship.

What kind of mechanic doesn't know how to align the wrench handle with the crank arm when removing pedals or cranks, and doesn't know to take the bike off of the stand and place the frame against a solid surface before hammering pressed-in parts out? So painful to watch amateur technique. Hope others aren't copying him.

Pretty laughable the number of people moaning about switching from Campy to Shimano. So what if the bike is 100g heavier. Not going to notice that on the road with the exception of the bigger cassette range for climbing. Pretty sure cost was a contributing factor over spending massively on Campy Record over Shimano 105.

Like your technique for aligning the levers👍

This is something thr guy at Bike speed wouldn't do... He'll first of all clean and detail the frame before putting on those new parts...

Who the hell removes Campy for 105 because they don't like their ride? Unless if the Campy stuff is broken or too worn in, this dude just wants to waste money.

Well this guy hates this bike even more that the last owner lol. Why put 105 on it?

A predictable number of cycle snobs commenting, complete with I would say false accusations of convert advertising. I really appreciate the time and effort you put in making this video 👍

"What's this? A center for ants??"

Well changing from on groupset to another is fine, but come on, clean and polish the frame before putting the new stuff on, not good practice.

Love the use of the magnet. Also the cat

This is why only I touch my bikes

I don't understand why people complain. I would do the same, replace some Old used crapy campa and put New 105 or ultegra.

This is like putting Tata Parts on a Ferrari ! l would need Therapy if my bike mechanic did this to my bike 😵‍💫

I do not understand the point of the video...if the Athena groupset was still functional , why replace it with a brand new 105 groupset for the cost of it ?

The customer should have requested a tune up, with new shifting/brake cables. Use the rest to upgrade a better set of wheels. Wrong move from Campy to Shimano 105.

Sorry to comment, but i would probably spend 80 percent of the total work time by cleaning and detailing that frame before putting the new parts. Nice bike.

You’re wasting realty on the video if you use portrait mode. Please, Never go portrait mode in a full length video. It looks hideous on big screen TV. If it was vlogging and a bit of add-ons, Understandable but 11mins of portrait mode just doesn’t sit well.

That's a great cat !

Funny thing... I took a Miyata 712 with 105 and rebuilt it with 3x11 Athena. Great bike. Probably the best shifting on any of my bikes.

Perfectly understandable to put a 105 in place of Campy. It's like having an Alfa Romeo and replacing with a Toyota. The Alfa will have the prestige and history but the Toyota will be easier to live with, operate and service.

Enjoyed watching this a lot. Shimano from campy though... Controversial

Obviously the Campagnolo groupset on an Italian frame goes', but it's mechanic heavy, Shimano is a little simpler..imo

I like to set the limit screws without a chain, just by moving the deralieur by hand. then I messure the chainlenght on short/short with minimal chain tension. if the components fit each other there is no problem in big/big eather. and the bar tape had to end earlier, so the full FSA logo would be exposed. You´ve added over 100g by switching to shimano that was not so satisfining... I would have installed a second hand mecanical record instead.

I leave the front D cable uncut until the last moment because i have a hell of a time getting the initial cable tension right on the newer style shimano gtx/105 etc pinch bolts

😂 Just Luke my cat. He watches me lick up every tool then watches what I do with it, or tries to bite the cables to get my attention

Best vidéo of 2023 ! Love it

I found that video fascinating , you make my efforts look laboured lol

Beautiful Job. 💯👍

Quanta perfeição na montagem. Grande profissional. Parabéns amigo.

I really enjoyed watching you work. Thank you! Question... why do you whipe the cables before installing them? Don't they come prelubed?

I always wondered how the cables can be replaced inside the tubes. Now I have an idea with that Nd magnet, thanks! I make the maintenance for my own bikes and I had assembled them all for the fun. Nice vid!

the title should be : My customer didn't love his Bianchi bike anymore, so I spent $2000 on it.

I'm confused. Did he just swap a Campa cassette for a Shimano cassette??? Like it's the most normal thing to do? Like freehubs fit all? I am a self thaught bike mecanic (thanks internet, youtube) and in the 5 years I'm making a living out of it I did a lot of retro race bike restorations. One of the first things I learned is that compatibility is not a given. Clients demand to just swap a part of a certain brand and generation for something completely different. Then I start summing up all the problems and complications I will come across trying to make their ideas work. What am I missing here?

Enlightening to see you disassemble it

ah ah you swap a campy athena o record for a shimano 105. The most stupid thing to do.

I am so confused right now there was nothing wrong with that campag group set. Plus, it suits the Bike better being Italian and how is the bottom bracket shell one side threaded and the other side non-threaded and how is he fitted a Shimano cassette on Campag free hub body I’m so confused right now all I can say is this guy has got himself a free campag groupset

Better pre rebuild.

I wonder what's wrong with Athena? Apart from cranks...

I would upgrade to campy record not 105

He could have bough an entire new-used bike for the price of parts and work

For bike that is using external cable routing, it is best to use di2. This will leave you with 2 cables instead of 4 and make the overall appearance much nicer. If this were my bike, i would have it completely stripped, then send for a new paint job. After that, install a ultegra di2. Or sell away this bike and buy a new bike. Either way, your customer would be much happier.😂

Rough as guts!

Smells like advertising. There are lots of it on KZfaq, camouflaged on "fans like to watch" kind of videos. However, if the video is legit I'm not sure if the guy will be impressed with the switch.

Crazy my 40 plus years of experience says so !

Havent seen your video in more than a year. Didn't knew you change the name of the channel

I have a race bike from the early 1980’s, new bikes just confuse me.

Bush mechanic. Replacing Potenza with 105 ..... really!!! Clueless. Not detailing the frame before rebuild is rookie stuff.

I want a Whanki Bianchi...soò bad.

Putting Shimano on an Italian bike... you should be locked up for this😜

Who does not love a Bianci bike?

My bike feels so crap on the front mech

do you degrease and oil a new chain before putting it on? :)

Remind me not to get Campy on any bikes I buy... 😱

You committed a crime. Address ng Shimano in that bike. Basically made it ready for scrap heap with that massive downgrade.

Una lavatina e una ingrassata a lla serie sterzo non gli avrebbe fatto male🤨

As a pro wrench, the steps of removing components are really chaotic … no particular orders. Moreover, cleaning in the middle of removal process, with non-environmental-friendly aerosol spray?

Shimano????!!!!!!

Des patins ?😂

Stupid thing to do.

But why?

🐈

😂😂😂😂

Non è cambiato nulla

Instead of every so called bike genius complaining about fitting japanese 11-speed groupset over Italian 10-speed groupset on an Italian branded bike, do some research on why the customer wasn't willing to pay for an overpriced 11-speed campagnolo groupset. As for the method of building, nothing wrong with his methods or practices.