Thank you!! Planning to get the same pool that you have and saw some bad reviews talking about rusting so your video is a life saver🤣🤣

So happy to find this recommendation. We use a saltwater system and have found that we get 3 seasons out of our Intex frames before the rust is so bad, we need to toss it. I've always thought it to be a shame since the liner is still in good shape! I've wrapped the T-joints with silicone tape and that has lessened the rusting there, but it's a lot of work and we've found the horizontal poles (that slip through the top of the liner) rust anyway. This year I paid 3x what I used to pay for an Intex Pool so I'd really like it to last LONGER than 3 years!! Going to try this product!

Purchased it for my pool, ty!!

Ordered this! Thanks for the tip!

Thank you so much for sharing this! 😁

Definitely going to be getting this. Thanks for the suggestion. Only thing I want to check first is if it has oil in it as I have heard that oil or an oil based lubricant used for this will break down the pool liner . I guess the wiping it on would mostly eliminate that problem though?

Excellent information thank you! subscribed.

Awesome thanks will try it

Thank you so much. Really appreciate it.

Thanks for sharing 👍

Tank you for sharing

Wish I saw this sooner. I have the exact pool. 4th summer and the rust is about unsafe at this juncture.

I ordered this product I’m putting up my pool this weekend and will spray all supports with it I got 5 cans.

Is this similar to the dry lube stuff for chains? That stuff has a waxy coating. I use it quite a bit on stuff I don't want to get oily but needs lubricated.

How do know if your pool is second are three generation pool?

Do you need to wait on assembly after treating?

Since the ladders on these pools sit in water constantly and you wouldn’t want this chemical in the water is it best to remove the ladder from the water when not using the pool?

Have you tried rustoleum rubberized undercoating? We are going to try this on our parts.

I ordered this and applied it to every square inch of the frame and ladder BEFORE assembling. I Used a rag to ensure it was all covered. Brand new pool has only been up for months ladder legs constantly has rust particles pooling on the bottom of pool and all joints are rusting. Yes, I do use a salt water system. I wouldn't give this product a 1 star, unfortunately 😕

Unfortunately I had my build without any rust protection now I’m having the problem my pool is only like 6 months old and I can see you Rust on the connections would the spray wok or any suggestions.. thanks

Should I sprayed it on before we put the pool together?

Is it safe to use? What if by any chance it gets into the pool water.

I used this product today and it's been a few hours and it doesn't seem to have dried at all. How does this get its waxy coating if it doesn't dry completely?

Found this video after our pool was installed. Can I still use the wipe down method, although our pool is up?

The only real solution is to feed a slightly smaller diameter PVC pipe inside the rusting one. It works perfectly and is a permanent repair. The same can be done for the legs.

how often do you do this.

Can this be used on the ladder ?

@Joe V is your pool chlorine only or a saltwater generator too? I am a pilot and have my plane sprayed with a aircraft specific solution to prevent rust. Love to know the details with the T-9. Did you still get rust, how long has your pool lasted, etc? Thanks.

Had that same pool and after a couple of years those windows will begin to leak because of the UV rays. my fram is rusting every where it is a Bestway steel pro max junk

Its true. In 3 years Our saltwaterpool was finished af rust..

Where do you buy this lubricant

Jesus is truth repent before it's late

Why cant you just clear coat it

...its just a water displacemer...the wax part...smh

Wd-40 same thing