Beginner Metal Stamping Advice for Beginners (Pt 3: Supplies)

Рет қаралды 37,600

7 жыл бұрын

There's a lot of misinformation out there for metal stamping beginners. In this series of videos, I'll walk you through some of the tools and supplies you'll need for starting off, and address some of the not-so-awesome advice and recommendations I've seen.
In this video, I'll talk about metal stamps and stamping supplies. By starting off with the right supplies and stamps, you'll actually save yourself money and headaches over time!
(Please note that some metal stamps are indeed rated to use on stainless steel, but it's just really important to check your stamps' rating before you accidentally ruin them on the wrong materials.)
Part 1: • Beginner Metal Stampin...
Part 2: • Beginner Metal Stampin...
Disclaimer: Below are links for some of the products I've used in this video. Some affiliate links. If you choose to purchase through these links, I will receive a small commission, which helps to fund more content for my channel. I will ONLY provide links to tools and products that I use myself. Thanks!
Impressart 7/8" blanks (the size I personally use the most):
www.amazon.com/gp/product/B00...
Juniper Font Starter Set (this is a good starter set, with a brass hammer and a bench block):
www.amazon.com/gp/product/B01...
My Favorite Stamping Hammer:
www.amazon.com/gp/product/B01...
Bench Block (a little larger than the one in the video, which works better):
www.amazon.com/gp/product/B00...
Rubber Bench Block:
www.amazon.com/gp/product/B00...
Blank That Stamping Blanks (my favorite for basic shapes):
www.etsy.com/shop/BlankThat?r...
The Supply Guy (fonts including Jenna Sue, tools, blanks, design stamps):
www.etsy.com/search?q=thesupp...
Links for other items used, and basically everything I use that I can think of below! (I make a teeny commission if you purchase items using these links) -
Blanks: amzn.to/2IjY7fn
Design stamp: amzn.to/2FWzwdO
Bench block: amzn.to/2GbruOv
Hammer: amzn.to/2IaAaYG
Font stamps: amzn.to/2D314NO
Buffing block: amzn.to/2KkNL1l
Bracelet bending pliers: amzn.to/2OYFoqV
Sharpie: amzn.to/2D451SF
Electrical tape: amzn.to/2P1TLek
Duct tape: amzn.to/2G0xOIj
Nylon Mallet: amzn.to/2LjiFDw
Pliers: amzn.to/2NdAcgO
Sharpie Paint Pen: amzn.to/3b8FdGa
Pro Polish Pads: amzn.to/3bPMvhk
Renaissance Wax (to seal finished product): amzn.to/3e1prih
Dapping Set: amzn.to/2PnLcP3
Power Punch: amzn.to/3b9gotZ
Steel wool (for texture and cleaning): amzn.to/3bYmpsq
Custom shaped stamping blanks: tidd.ly/3b5fzCm
Beaducation's Etsy shop: tidd.ly/3uOl1RJ
My favorite basic shaped blanks: tidd.ly/382ZnzL
Jasper's supply shop (fave bracelet blanks): tidd.ly/3uMv1ei
Where I got a lot of my font stamps: tidd.ly/3kLkCv2
Where I buy my beads: tidd.ly/3dYx893
The best necklace chains, jump rings, etc.: tidd.ly/3q9wNCM
Scissors that are not for cardboard (Ha!): amzn.to/2uADHq5
Stamp Storage Container: https: //amzn.to/2NQ7lQM
Bench Block (not this humongous): amzn.to/2NN2cce
Impressart Brass Hammer: amzn.to/2NQJ8dd
Nylon Mallet: amzn.to/2LjiFDw
Pliers: amzn.to/2NdAcgO
Stamp Storage Container: amzn.to/2NQ7lQM

Пікірлер: 95

@carolmccollum9341 6 жыл бұрын

Wow... I have viewed all 3 of your beginners' videos... Thank you!! I watched this one twice & took notes the 2nd time!!

@Dani-th6cl 7 жыл бұрын

3mm lowercases to start! That's exactly the information I needed among other things. Thanks so much~

@makeitkate3240 7 жыл бұрын

Dani you're so welcome! There are so many choices, it can be hard to know where to start!

@deadboltcafe5258 2 жыл бұрын

Very helpful video for getting into stamping. Thank you! I’ve watched a bunch of your videos. :)

@nancymedina6667 4 жыл бұрын

Thank you so much for sharing your knowledge with us .... I’m taking all your advice and starting to stamp .... thank u again!!!! Ur awesome 👏🏽

@showmethehoney1475 3 жыл бұрын

I wish there were videos this valuable on every topic! So informative and helpful!

@makeitkate3240 3 жыл бұрын

I’m glad they’ve been useful!

@Caro_line5 6 жыл бұрын

Thanks for all your useful info and sharing your experience. I'm really keen to get started, I'm glad I watched your videos first as I probably would have wasted a lot money on the wrong things if not. So helpful, thanks x

@makeitkate3240 6 жыл бұрын

Caroline Warren You are very welcome! You're going to love stamping!

@natalieearthy8912 3 жыл бұрын

This is the first time I've ever left a comment on KZfaq. I just wanted to say thank you for posting all 3 of your beginner videos (I've watched them all). They have been so useful and informative. Thanks!

@makeitkate3240 3 жыл бұрын

You’re very welcome!

@ibtisamali 7 жыл бұрын

Really great tutorial series! Thank you!!

@makeitkate3240 7 жыл бұрын

Savannahali You are so welcome! :)

@kraftekaryn 4 жыл бұрын

Just came across your video and glad I did. I am new to metal stamping. I did not realize that one metal was softer than another for stamping. I had purchased stainless steel blanks, not realizing that it was very difficult to stamp on. Tried five times then gave up. After looking at the kit I bought I saw that it came with aluminum blanks which was easy to stamp. Now I know there are other metals I can use thanks to your video!

@jackied2518 2 жыл бұрын

Thanks for all your knowledge before I started ❤️

@marysorensen2322 6 жыл бұрын

Thanks Kate, very helpful series!

@makeitkate3240 6 жыл бұрын

You're so welcome, Mary!

@brendaleister6058 7 жыл бұрын

Very Helpful!! Thank you

@donnyandjenny 4 жыл бұрын

Great info thank you so much!!!

@MadsArabianbites 6 жыл бұрын

Thank you for all the hints and tips and I learnt a lot especially about the hole puncher. Thank you again and subscribed x

@makeitkate3240 6 жыл бұрын

madelaine hewitson You are so welcome! I hope to be able to add some updated videos about this soon. :)

@MadsArabianbites 6 жыл бұрын

Make It Kate thanks for the speedy reply :)

@ambravermigli5497 7 жыл бұрын

Really helpful! Thank you, and greetings from Italy :)

@makeitkate3240 7 жыл бұрын

Ambra Vermigli Hello! I have a friend in my neighborhood from Italy! :)

@carlajohnson8574 3 жыл бұрын

Very helpful. Thank u

@dabowsplayroom9461 5 жыл бұрын

I'm a Newbie to stamping. I learned so much from your 3 videos! Great tutorials!!

@makeitkate3240 5 жыл бұрын

Dabow's Playroom Thank you! ❤️

@angelaw.lawrence4418 5 жыл бұрын

Same for me! Always been a creative crafter but stamping was something that I was apprehensive in beginning because I thought it was too costly! I'm ready now!

@marniekatzbeck5856 6 жыл бұрын

I am new to this craft i did use the wrong hammer got the same one you are using and i got stamps from Harbor Freight. you gave the best information i have to get better at placement and spacing, do love it want to make teachers gifts for my youngest he is moving to the High school.

@maharlikabebz2249 4 жыл бұрын

Hi!! Thanks for the help!! I don't know how to thank you enough. I'm so so close to buying in Ali express. Not saying its not good but at least I know what to get. I got it right already when u said start with lower case stamps. I kinda thought so. And then I wanted to ask on which size to start.. U answered 3mm!! Thanx again. More power to u..

@irisantonetty8800 7 жыл бұрын

Thank you so much!! I've been thinking about starting this hobby , but I see that the impressions are expensive as well as the tools! I'm so glad you did this tutorial, it saved me from buying the chasing hammer and the hole punch I was thinking of buying! I've already spent so much money on beads and thought this would be fun to add to my jewelry making. When I see all those impressions you bought, I can see me going overboard with purchasing and unsure whether I can stamp metal that well! Lol Anyway, thank you!

@makeitkate3240 7 жыл бұрын

Iris Antonetty When I first started, I had seen videos where people said they kept buying fonts and designs, and I couldn't understand that! But now... I think I have 12 fonts and at least 75 designs. And that's NOTHING compared to some of my friends! 😂 It can definitely become an addiction.

@alanalendvay6131 5 жыл бұрын

Thanks so much for this video. I had a set of stamps but donated them to a Senior Center when we moved across the country. Now I'm into this again...me bad...lol....what brand is in the little container at 1:40/9:01. Thanks Again.

@AngelaWiser 7 жыл бұрын

Thank you for all the information! You've been so helpful. Today is my first day to get to try out stamping. :) I'm glad I found your video before I started as I bought the wrong hammer (?). How do you organize all your metals and materials? Where do you get the little plastic box on the right side of the screen? Again, thank you so much for the information.

@makeitkate3240 7 жыл бұрын

Angela Wiser hi there! I think organization is a constant struggle for most of us creative types! I currently have a few organizers from Harbor Freight - the kind with a jillion drawers for nuts and bolts - that I store my blanks, beads, and findings in. I also have several little containers like the one you pointed out, and those are just from WalMart. The best price for those is at the beginning of the school year, when school supplies go on sale. Welcome to the stamping club!

@AngelaWiser 7 жыл бұрын

Thank you so much.

@beckyhalfhill 5 жыл бұрын

Thank you so much for these videos. I recently purchased a impressart kit.... my results are pretty crummy so far! Lol how much practice does this typically take to get a clean stamped image not to mention getting a straight line. I did use tape. Lol

@katherineruiz2907 2 ай бұрын

Hi! Thank you so much for all the tips! I’m new in jewelry stamping and you have helped me so much. ❤️ Do you have tips for stamping in brass? Does a brass hammer can turn into a better result? I get a lot of double stamping and don’t get a clean look neither a nice stamp 😢

@makeitkate3240 2 ай бұрын

I prefer using a brass hammer. To fix your double stamping, try putting your bench block on a more solid surface when you stamp. Like a counter or a really sturdy table. And then just more practice!❤️

@lisakirkorian9750 7 жыл бұрын

Hi Kate. I am a beginner & your videos have been so helpful. I so much appreciate your input on not spending money on items that are not necessary and/or having to replace with tools that work much better. Thank you so much for that as it can become costly! What type/size of chains do you use & where do you buy them?

@makeitkate3240 7 жыл бұрын

Lisa Kirkorian Hi there! I buy ball chain from Supply Your Soul on Etsy, and stainless steel chain through group buys with friends on Facebook. I can cut the ball chain to any size I want, and I get the stainless in a variety of lengths from 18" to 24". You can find those for good prices on eBay too, if you're willing to buy in bulk. ❤

@harinih6407 5 жыл бұрын

thanks for all your tips!!what's your advice/tips on stamping on sterling silver blanks?

@makeitkate3240 5 жыл бұрын

Harini H Would you believe I’ve never stamped on silver?? I guess my only tip would be “don’t mess up.” 😂

@harinih6407 5 жыл бұрын

@@makeitkate3240 that's always a good tip!! I should frame it 😘😁

@christinesandoval6477 6 жыл бұрын

Hi I've learned a lot from your videos. Can you please tell me what is the difference of using a large bench block or a small one. Are large and small used for different purposes or the same? Thanks

@makeitkate3240 6 жыл бұрын

Hi Christine. A large bench block and a small one will accomplish the same thing. Really the only difference is size. A small one is less expensive (less raw material used) and more common to find. It's great when you have limited space to work with, and it's all you'll need if you're stamping as a hobby or you make lots of one-of-a-kind pieces, or you don't do a large volume of business. Even if you're making larger pieces where sections hang off, like bracelets, you can just move it around on the bench block. A large block is great if you do a large volume of the same thing. For example, I recently made 100 pendants, all with the same design. The bigger bench block was a big help for that because I could tape a bunch of them to the big block, side by side, and stamp them out assembly line style. Other than that, I find that I only use a small section of the big block anyway.

@lucyconroy2643 6 жыл бұрын

Hi I enjoy watching your videos as a beginner and got lots of useful tips, the thing I'm struggling with is the colouring of the impression, I've used sharpie marker and then it smudges on the metal and I can't get it off, please could I have some advice thank you 😊

@makeitkate3240 6 жыл бұрын

Lucy Conroy Hi there! I’m actually working on a video with this right now! I personally use sharpie ink pens now, and then remove with rubbing alcohol. I’ll link here to the video when it’s done. :)

@kisharayford6966 3 жыл бұрын

Hello thanks for the videos they are very helpful. I noticed that on one of my projects during stamping I made scratches. I can't really pinpoint how, but have you heard if this happening and would you know how to prevent it?

@makeitkate3240 3 жыл бұрын

Hi there! That’s definitely happened to me a lot. If the scratches are on the front, my guess would be that your stamp slid along the surface of the piece when you were trying to get it into position and line up the letters. If they’re on the back, it’s just from making contact with the surface of your bench block (or anvil or whatever you’re stamping on). If you’ve ruled those things out, maybe you can describe the scratches and we can figure out where they’re coming from. :)

@JudyBi 4 жыл бұрын

Hello awesome video! I struggle to keep the metal stamp stable when hammering it down because it keeps shifting. I tried metal stamp holders, but the stamp still ends up shifting and makes the final stamp blurred. Do you know anyway to fix this issue? Thanks.

@makeitkate3240 4 жыл бұрын

Hi there! If you watch my more recent videos, I show you how I use my pinky to brace the stamp against the metal. Outside of that, the only advice is to keep practicing! It happens to everyone when we’re starting out. :)

@janebellco Жыл бұрын

I almost bought those cheap blanks at hobby lobby as they were on clearance.. glad I didn’t!

@betzaidatatacajigas7874 7 жыл бұрын

Thank you so so much..Is there a specific gauge for the metals?

@makeitkate3240 6 жыл бұрын

Betzaida Cajigas It really just depends on the project. I use a lot of 14 gauge aluminum for pieces that will remain flat. Lots of copper and brass come int 20 or 18g. I like 18g aluminum for the plaques on leather cuffs, because it's nice and bendable. I like 20 or 18g for pieces that I will dap. And I like 14g for cuff bracelets (the bangle style) because I want it to hold its shape, but still be adjustable for the wearer. Some shapes that I order hand cut are too intricate to cut from thinner gauges, so they're cut in 14g.

@michaelaboag287 3 жыл бұрын

Thank you for these videos! Can someone please let me know what I can use to prevent rusting? It hasn't happened yet but want to plan ahead, thank you!

@makeitkate3240 3 жыл бұрын

Michaela Boag WD40 or Johnson Paste Wax both work pretty well. (Stinky though!)

@michaelaboag287 3 жыл бұрын

@@makeitkate3240 Awesome thanks, I'll look into that!

@melanybarragan5734 Жыл бұрын

Do you stamp on stainless steel? And if you do what stamping kit do you use?

@staceygrimes4107 7 жыл бұрын

How do you know what size rivets and where do you find easy snaps for bracelets?

@makeitkate3240 7 жыл бұрын

Stacey Grimes I haven't done rivets or bracelets, but Beaducation.com has loads of supplies and a great video tutorial about rivets/riveting. Definitely on my list of things to learn! I love the look of it.

@1948rambo 5 жыл бұрын

What is the black block under the stamping block on your video?

@makeitkate3240 5 жыл бұрын

That is a rubber bench block. It helps to deaden the noise.

@Amitylulu 5 жыл бұрын

Where did you get your blue box for storing your stamps? I can’t seem to find anything to store the extra stamps

@makeitkate3240 5 жыл бұрын

Amitylulu It’s an ammunition box. :) You can get them at a sporting goods store.

@ibtisamali 7 жыл бұрын

Do some stamping sets/ brands give a better quality impression than others?

@makeitkate3240 7 жыл бұрын

Savannahali Absolutely! As a rule of thumb, the more expensive the set, the more crisp the impression. With the pricier sets, the end of the shaft will taper down to the letter, so that you can see exactly where the letters line up. With the less expensive sets, you have to go more by feel and practice. The less expensive ones are generally only rated to use on soft metals, whereas the more costly ones are frequently rated to use on metals like stainless steel. Lots of stampede prefer to only work with the softer metals, so that part isn't an issue, but if you're stamping on spoons and things, you'll want the stainless rated stamps.

@kyschellenberg5001 3 жыл бұрын

Can you us just the rubber one alone?

@roxiede7369 5 жыл бұрын

Where did you purchase the impress art? Amazon or elsewhere. Thanks for the videos !

@makeitkate3240 5 жыл бұрын

Roxie De Hi! I got all of my Impressart stamps from Hobby Lobby and Joann’s, and I used their 40% off and 50% off coupons. You can see a more updated list of my stamps and where to find them in my video of my 2017 font collection. :) Hope that helps!

@makeitkate3240 5 жыл бұрын

Here’s the link to the font video: kzfaq.info/get/bejne/h7ZzqJZ0qL3dj5c.html

@brucebarnes9138 5 жыл бұрын

The steel block that you're using come in different sizes and what was that black thing the block was on thank you

@makeitkate3240 5 жыл бұрын

Bruce Barnes Hi Bruce! The steel blocks (bench blocks) come in lots of different sizes. I currently use one that’s 6” wide and 7” long. :) The black thing under it is called a rubber bench block. You can use them under the steel to help deaden the sound of the blow when you strike the stamps.

@brucebarnes9138 5 жыл бұрын

@@makeitkate3240 Hey Kate what an anvil work I have a small one

@makeitkate3240 5 жыл бұрын

Bruce Barnes Absolutely! I love using my anvil too. All you need is a smooth metal surface, that’s thick - to keep from bouncing.

@edgarleon3673 2 жыл бұрын

Bendiciones por favor en Español gracias

@SarahGeorge41820 7 жыл бұрын

Do your aluminum blanks get scratched up or tarnish at all over time?

@makeitkate3240 7 жыл бұрын

Sarah George I'm so sorry I missed your question! Aluminum does not tarnish at all, but because it's a very soft metal, it will get scratched. 1100 is pure grade, food safe aluminum and is hypoallergenic. But because it is pure aluminum, it will scratch the fastest. 3003 aluminum is an alloy and has other metals in it, so it won't scratch as fast, but some people are allergic to the other metals in it.

@emmieprzybylski5182 4 жыл бұрын

Where do you buy chains/clips to make necklaces?

@makeitkate3240 4 жыл бұрын

You can find them everywhere online. Amazon, Etsy, Ali Express, Wish...

@emmieprzybylski5182 4 жыл бұрын

Make It Kate Okay, thanks so much, this video was really helpful!

@misspimake 4 жыл бұрын

What stamp set do you recommend for metal spoons?

@makeitkate3240 4 жыл бұрын

MissPImake I don’t know that there’s a single set to recommend. The most important thing is that you make sure the set you choose is rated for use on stainless steel. Those sets are typically more expensive, because they require additional treatment to be able to stamp on harder metals without the impressions flattening out on the stamps.

@misspimake 4 жыл бұрын

Make It Kate thank you!

@SimpLeeBeth 4 жыл бұрын

👍

@Super_Mom10 6 жыл бұрын

Stainless steel what stamp should I use

@makeitkate3240 6 жыл бұрын

Tammy Drago Hi there! My recommendation for stamping on stainless steel would be to use stamps from Stamp Yours, Font Fixation, Infinity, or Impressart’s premium stamps. These are all rated for use with stainless, so they are made to stay sharp over time with hard metals.

@user-tr8lo3xt6i 6 ай бұрын

@shannoncarlson6960 5 жыл бұрын

What about gold? You never mention it and its soft.

@makeitkate3240 5 жыл бұрын

Thanks for pointing that out! I've never worked with gold, so I can't speak from experience on that one. :)

@brendaleister6058 7 жыл бұрын

Do you have a Facebook group? I'm new to jewelry making and would love to find some groups for learning tips

@makeitkate3240 7 жыл бұрын

Brenda Leister I don't personally have any Facebook groups, but I would suggest doing a search for "hand stamping," "hand stamped jewelry," and "hand stamping destash" in the groups tab.

@jenniferfriedlander5450 4 жыл бұрын

I’m seeing this for the first time, obviously these videos are old, is the advice any different. I would like to invest some money into this but want to make sure it’s worth it

@makeitkate3240 4 жыл бұрын

Jennifer Friedlander Yep! Still the same. I would recommend you continue to research, because it’s definitely not a cheap hobby!