Beginner Tumbler Tips: Epoxy

Рет қаралды 128,608

4 жыл бұрын

In this video, I’ll show you how I measure and mix my epoxy. I’ll also go over 3 different application methods and the pros and cons of each.
Also, Nitrile Gloves are always recommended when using epoxy. When I made this video COVID was at its peek and I choose to leave the proper gloves for those with an immunity deficiency, the elder, and medical workers. Please wear the proper PPE when working with chemicals. When in doubt contact the maker of the epoxy you use for recommendations on what to use.
My Favorite Epoxy! Make sure to use my code and save
Alumilite: www.alumilite.com?aff=139
*Use code Sandy10 for 10% off*
Let's get social:
👉My Glitter shop: www.SOCglitters.com
👉Lets chat, share pictures, and raise each other up in my VIP FaceBook Group: groups/66793...
👉SOC Glitters Facebook Page: / socglitters
Tiktok: www.tiktok.com/@sandys_organi...
💌Happy Mail:
P.O. Box 7516
North Port, FL 34290
Royalty Free Music provided by www.bensound.com

Пікірлер: 230

@ColvinFamilyFarms5588 3 жыл бұрын

Love it thank you for showing so many different ways. Normally all I see is Epoxy method but they do not go into detail about timing, or waiting vs rapid use. As always you are a gem and a huge help!!

@osicegirl Жыл бұрын

This was super helpful seeing the different methods. I was wondering what I was doing wrong as my tumblers are coming out too lumpy and now I know it’s because I was not letting the epoxy sit for a while before applying, thank you so much for this video!

@MrUltraHide Жыл бұрын

You are very good at teaching. This video is very professional! Thanks for making it!

@summerpuckett1310 3 жыл бұрын

Thank you so much for taking the time to make this video! Its explained so much! Thank you thank you thank you

@anner.4944 3 жыл бұрын

This was very informative thank you for taking the time to do this.

@PhyllisGast4 4 жыл бұрын

Thank you! I didn't realize I could control this! Thank you again! 🥰

@mistrywoman4388 2 жыл бұрын

Excellent demonstration and video! Learned so much!!!

@coulettelove935 3 жыл бұрын

You're a LIFE SAVER!!!! BABAAAAAY when I tell you I hate the mod lodge method... whew.. thank you so much!! **new subscriber **

@thekoneill8 3 жыл бұрын

Another great video and most definitely a problem solver. Thank you.

@latresastateman985 2 жыл бұрын

Thanks this really help. I prefer to have mine thicker as well I notice less bubbles and it comes out so much better

@Candice_Nurse2020 4 жыл бұрын

Thank you for this video! I’m new at this and I just trash what’s left instead of doing another coat. I was wondering why it was so smooth and thick when I just let it sit. Now I know.

@naturalcurls4life576 3 жыл бұрын

Awesome information. I am just starting and this was great to learn, tfs.

@littledraws6680 Жыл бұрын

Thank you that explains why we're not been doing mine they don't come out smooth but sometimes have like eighties that don't completely filled in even though like when I am done messing with it is all smooth but as it stays on the turner it gets to where spots are not covered

@dreamydesignsbyalia 4 ай бұрын

great comparison video thanks so much!

@lindalowery8541 5 ай бұрын

Your video is great!!! It’s very informative! Thank you! ❤❤❤

@jacklynnnino6000 Жыл бұрын

Loved this video! Beginner here, and found it very helpful. Can I still cure my tumblers if I don’t have a cup turner? (Not sure what it’s really called)

@SuperBrowndog1 8 ай бұрын

Great advice. Thanx 👍

@parkerconroy8849 3 жыл бұрын

I’m 14 and I like doing this and this was very informative and helpful

@SandysOrganizedChaos 3 жыл бұрын

So happy to help you out Parker!

@sweetericka09 4 жыл бұрын

I just want to say THANK YOU for sharing your info! I just ordered epoxy and looking at a where to get a reasonable Turner as I just want to try it. I watched your DIY to make one but I dont have the tools 😫. You're a sweet soul!

@SandysOrganizedChaos 4 жыл бұрын

Hobby lobby has Spin It turners for relatively cheap.

@LucyGar23 3 жыл бұрын

I know this is 9 months old and I dont know if you ever got a turner. But, I found one on amazon for 30 bucks

@sweetericka09 3 жыл бұрын

Aw thank you Lucy, we actually built mine using Sandy's video

@LucyGar23 3 жыл бұрын

@@sweetericka09 oh! I am so glad!!!! i am building one right now! starting a business

@sweetericka09 3 жыл бұрын

@@LucyGar23 ohh cool! Are u on Instagram? If so add me @craftyericka

@vickyewilliams8920 3 жыл бұрын

Great tips! Thanks

@yvettehollins8569 2 жыл бұрын

Thank you for sharing your work with us 😀. All of them a Beautiful🤩‼️‼️‼️

@shawndatolliver8807 3 жыл бұрын

That was amazing! How do you get the top and bottom of the cup covered so it does not come out rough?

@CHunterSlater 3 жыл бұрын

Bless you Sandy.

@nathaliequiles1122 4 жыл бұрын

This video has become so helpful !!! I just have a quick question .... I always make sure my cup is clean and the stickers are well placed on but when I put the expoxy it quickly starts to show bubbles and I have tired everything ! Please help !!!

@busyb610 4 жыл бұрын

Great tips. Thank you!

@SandysOrganizedChaos 4 жыл бұрын

You’re welcome 😊

@Lonepineacres 3 жыл бұрын

I’m just starting out, this is very helpful! I’m curious why nothing shifted doing all the glitter right away with just epoxy vs how much things moved when you did the glitter right away on top of the mod podge. Does that question make sense?

@marchettabrown7449 Жыл бұрын

Hello, thank you so much for your video. I have a question… what causes holes and pull back in the resin when curing?

@jonellejacobs2934 4 жыл бұрын

This was a great teaching tutorial 😊 Things that make you say Hmmmm🤔

@peppergarrison8521 Жыл бұрын

Thank so much ❤

@edwinfiso9369 Жыл бұрын

Thanks for the wonderful tips. I do have a question, how do you prevent the epoxy making dips onto the cup

@lisalarson5657 Жыл бұрын

Very helpful video. Do you apply the epoxy right over both glitters (fine and chunky)? How long do the tumblers take to cure?

@judychenoabotello4609 Жыл бұрын

I liked you video, thx for sharing. I wanted to know how you made your turner, as I am new to this.

@donaunsworth5620 Жыл бұрын

Fabulous tutorial. May i ask where to buy the pump action adaptors please?

@PlanwithBetsy 4 жыл бұрын

Great tips, thank you

@SandysOrganizedChaos 4 жыл бұрын

You’re welcome!

@maryannposey1837 4 жыл бұрын

This was one of the most helpful videos. Thanks for everything. I just ordered a lot of your glitter.

@bluer4u 7 ай бұрын

This was very helpful. I am getting frustrated with my tumblers, it looks as though the epoxy has pooled all around the tumbler and in places it is 1/2 inch ridges. Could this have to do with the epoxy??

@Robsquick 4 жыл бұрын

Holy cow you are amazing. Thank you so much for explaining this, I had no idea 😳. Great tutorial!!!

@SandysOrganizedChaos 4 жыл бұрын

You’re welcome!

@Robsquick 4 жыл бұрын

So I decided to switch to alumilite (because it’s what you use and they are having a 20% off sale). I can’t find the dang pumps anywhere. Any ideas?

@SandysOrganizedChaos 4 жыл бұрын

I’m sure there are other pumps available, but I got mine from Alumilite. Maybe reach out to their support and see if they know when they’ll be back in stock. The pumps are not 100% needed, but it sure makes it a lot easier. Good luck on your search.

@tinahaynes175 3 жыл бұрын

great tips thank you so much!!

@SandysOrganizedChaos 3 жыл бұрын

You’re very welcome!

@lisahernandez425 4 жыл бұрын

First I want to say that I love your designs! My question is do you sand every tumbler? Second question, why use Alumilite Epoxy? I’m trying to find one that is easy to work with.

@donnasmith5727 4 жыл бұрын

So interesting! Thanks

@SandysOrganizedChaos 4 жыл бұрын

You’re welcome!

@joycebecker2449 11 ай бұрын

The pumps for your resin is a GREAT idea!!! Are they specifically for the resin containers?

@Isa.lapioo Жыл бұрын

Your video is nice and I really like the way u explained everything can you please do one with a plastic cup I get that people don’t like plastic cup but someone gifted me my first turner and I want to practice❤

@iluv2bake 4 жыл бұрын

That was a big help now I know what I was doing wrong. Thanks

@SandysOrganizedChaos 4 жыл бұрын

Glad I could help!

@reneethrasher7154 4 жыл бұрын

Thanks for your videos I really enjoy watching them. Couple of questions what do you do about bubbles and dust. I keep having issues with little specks I believe to be dust. It doesnt matter how clean my craft room is. Any help would be appreciated.

@SandysOrganizedChaos 4 жыл бұрын

I’ve learned to not let slight imperfections bother me. What may seem like a huge deal to me, the customer never sees. I’m sure you are doing your best to keep those bubbles and particles to a minimum. Art is never perfect. In the end all your customers will see is something handmade just for them.

@daydreamworksbykim2681 3 жыл бұрын

Thank you for your great videos...I’ve been binge watching lol. Can you tell me where you got and what type pumps you use?

@SandysOrganizedChaos 3 жыл бұрын

I got them straight from Alumilite.

@lynetteflores3407 3 жыл бұрын

Where did you purchase the big bottles of A&B? These kits come with small bottles. Thank you for your time😊

@georgiagurl1107 3 жыл бұрын

Thank you. You mentioned something about sanding the chunky glitter ? What do you mean?

@mikenmonih.villarreal7492 9 ай бұрын

On the last way you showed do you have to seal it with another coat of epoxy so it is shiny and smooth??!

@Chubbbs117 4 жыл бұрын

Great tips

@SandysOrganizedChaos 4 жыл бұрын

Thank you!

@karenmckenzie8465 2 жыл бұрын

So mixing a letting it sit before pouring onto the tumbler ie best?

@stephanieburgett3478 Жыл бұрын

After you drizzle the sparkles in do you spray it with adhesive glue before you add another resin layer?

@Lannnaaaaaa 3 жыл бұрын

Thank u so much

@kustomambition9831 2 жыл бұрын

Thank you for all these tips Sandy. You make some really helpful videos. I’m curious, I’m working on a tumbler now that just will not stop dimpling. I’ve read a bit about it and my temperature is steady and I covered the tumbler to prevent dust the second time, but it’s still getting dimples. 😕 any tips on dimples??

@kustomambition9831 2 жыл бұрын

Ah, just watched your fisheye video. So then my new question is, can I spray clear coat over this cost of epoxy before my final coat to get this stuff to stick? I’ve sanded in between epoxy coats to try to fix and it just keeps pulling away. In those areas.

@mark-hp6un 3 жыл бұрын

I know you have answered me on this before lol but how much epoxy do you use for glitter i got the 16oz bottles of epoxy and also on the alcohol ink twirl tumblers how much epoxy should i mix before adding the inks

@jenniferpace4385 Жыл бұрын

Do you add more epoxy after the glitter in the last technique or is the first coat enough once the glitter is applied? How long do you keep them on the turner?

@jamiepfeiffer6005 Жыл бұрын

I just bought this one do you wear a mask with this ?

@Britneymphotography88 4 жыл бұрын

what is different putting in epoxy? is it easier ?sorry i am new

@sandiebennett5310 3 жыл бұрын

Wow! Your designs and tumblers are so beautiful.

@countrywench2310 Жыл бұрын

How do the little measuring cups get cleaned out for reuse ?

@elizabethzocco6318 Жыл бұрын

Do you prep the cups before doing the epoxy like sanding

@beverlyka7024 Жыл бұрын

So after the silver glitter was put on did you use resin again?

@ashleighkennedy500 3 жыл бұрын

Can I ask, I’ve just started my first tumbler. I had it spray painted black first. Then I did a thin layer of 1:1 epoxy and as I was spreading it with my finger before I’d put glitter on it sort of went a mottled look? What does that mean and how do I fix? I tried a bit of heat gun and it didn’t seem to make a difference.

@cherylpatten6001 9 ай бұрын

Thank u

@MichelleJ1822 2 жыл бұрын

I just started making my first tumbler and i spray painted it, let it dry overnight. Then i used mod podge to do first layer of fine glitter. I sprayed it with clear spray and let it dry. Then I did my first layer of epoxy. I put it on the turner and used the lighter to try to pop any bubbles and I got too close and burnt it in a couple of places. I let it finish curing then I attempted to remove them by sanding but that’s not working. I’ve got it all sanded and thought I would attempt to put another layer of glitter on. Since it’s got a layer of epoxy can I only do the epoxy method of adding glitter or can I do the mod podge again?

@jamifrank8185 3 жыл бұрын

Great video

@SandysOrganizedChaos 3 жыл бұрын

Thank you 😊

@caradebaun5428 2 жыл бұрын

I use the same resin… where did you get pumps for these?

@heidiewing6566 4 жыл бұрын

That is a great tutorial!! ^5!

@SandysOrganizedChaos 4 жыл бұрын

Thank you!

@jessicabrown1625 4 жыл бұрын

Thank you for this awesome video! Can i ask where you purchase your Alumilite and do they come with the pump?

@SandysOrganizedChaos 4 жыл бұрын

I purchase direct from Alumilite. The pumps are sold separately. I also purchased those from Alumilite.

@jasminevalenzuela99 4 ай бұрын

Loved it thanks but what tumblers do you recommend when starting out?

@SandysOrganizedChaos 4 ай бұрын

Great question! The Stainless Depot offers practice tumbler bundles. These Tumblers have slight defects making them unsuitable for regular sale but are great for practicing! thestainlessdepotcompany.com/products/practice-on-these-cups-bundle-20-units-2-each

@annettethompson2808 4 жыл бұрын

That was very interesting Sandy, thank you once again for a great teaching vlog!!(:

@SandysOrganizedChaos 4 жыл бұрын

Thank you, Annette!

@aaravwallace9161 3 жыл бұрын

you all probably dont give a shit but does any of you know of a tool to log back into an Instagram account..? I somehow lost the account password. I would appreciate any tips you can give me!

@jermainebrixton7559 3 жыл бұрын

@Aarav Wallace instablaster =)

@aaravwallace9161 3 жыл бұрын

@Jermaine Brixton thanks so much for your reply. I got to the site thru google and im trying it out atm. I see it takes a while so I will get back to you later with my results.

@aaravwallace9161 3 жыл бұрын

@Jermaine Brixton It did the trick and I actually got access to my account again. I'm so happy:D Thanks so much, you saved my ass !

@bellarrene Жыл бұрын

Beginner here! Do you mix A & B the whole time?

@debbiemccartney9633 2 жыл бұрын

How do you get a smooth finish? I keep getting streaks… Not sure if it’s applied too thin, too thick, but I am soooooo frustrated! Thanks, Debbie

@katyruddiman9680 3 жыл бұрын

Great Tips. Why do I get dents in my epoxy?

@maegancaramiciu1178 3 жыл бұрын

I was just wondering if you don’t do glitter do you still have to do two layers of Epoxy? Or can you stick with just one layer?

@808armywife 3 жыл бұрын

I’ve been watching your videos, I’m new to doing tumblers. My first one I got lots of fish eyes. I saw one of your videos you added clear coat.. I’m confused with this video are you adding the clear coat ? If you don’t have a video, can you show from starting a cup to end? Thank you. Your videos help!!

@SandysOrganizedChaos 3 жыл бұрын

Sometimes those chunky glitters are a bit to slick and tend to wick the epoxy away. I like to use Rust-Oleum 2x ultra spray sealer before the epoxy to help it have something to hold onto. I will make sure to make a video from start to finish or I’ll talk about it in my next vlog.

@Chrissy1234321 3 жыл бұрын

I have a question. With the white one, you don't put a coat of epoxy over the glitter??

@jasminegrn 2 жыл бұрын

Did you let the epoxy sit before doing method 3 as well?

@Establishedin74 3 жыл бұрын

Thank you

@SandysOrganizedChaos 3 жыл бұрын

You’re very welcome 🤗

@hayleyheathscott5325 3 жыл бұрын

So I have a question I apply epoxy to my tumblers and I've been trying to figure out why it does it but sometimes even after I use the heat gun when I first do it and then 15 minutes afterwards I still have little bumps in them or like streaks whereas completely coated the cut but it dries and it's like leaves the area am I not putting enough epoxy on the cup is that why or what

@timoiiiproductions Жыл бұрын

How do you get a smooth surface? I’m doing little 1.5 gallon trash cans with a clear coat. But my first coat is all sort of uneven right now. It’s been spinning about 1.5 hours. Any tips appreciated :)

@ashleycox8083 3 жыл бұрын

I have a question I have done my epoxy right but I have like ripples in the cup when the epoxy hardens ! Do you think it mite be because my cup turner is messed up and it’s not level 🤷‍♀️?

@user-le3ii5wu7f Жыл бұрын

I am worried that my basement will be too cool to work on tumblers down there. Can you give any advice on this?

@melodycanady1463 2 жыл бұрын

What did you use to sand the rim?

@troypowell1671 2 жыл бұрын

how much money do you usually have in the tumblers? if i got 32 resin how many tumblers can i make. or how many out of 1 galan? wife was thinking of doing this .

@saidumuhammed4737 3 жыл бұрын

Will you tell me the measurements for resin

@sandiebennett5310 3 жыл бұрын

Do you have a video on sanding steps? I'm new to all this and I'm so confused about the sanding. Btw my name is also Sandie! Spelt different 🙂

@SandysOrganizedChaos 3 жыл бұрын

I don’t on the sanding steps. But that is a great idea. Thank you 😊 that’s awesome, I’ve never seen it spelt that way!

@vanessagallegos2003 Жыл бұрын

Do you mix a n b all the time

@sarahanderson7163 2 жыл бұрын

I am just beginning and this has been helpful! One big question I've been having is, how to get the bubbles out? Hair dryer? Do you spread the epoxy over the cup and then go back with a hair dryer?

@SandysOrganizedChaos 2 жыл бұрын

I use a kitchen torch that you can buy off Amazon. The hair dryer will heat up the epoxy helping remove bubbles but I’ve found using a torch to quickly pass over the epoxied tumbler gives much better results.

@sarahanderson7163 2 жыл бұрын

@@SandysOrganizedChaos thank you!

@jesustorres2159 3 жыл бұрын

So which way is better I'm sorry I quite didn't understand

@annabailey355 2 жыл бұрын

I am using the same resin as in this video. Wondering if you can tell me, if you “work” the resin to long does it change its curing to a hard finish? By working I mean heating it adding alcohol inks and moving the resin with air? Any help is appreciated. I can mix resin for 2 cups work them the same way and still one will cure one will be tacky sometimes. This also occurs if I don’t use the inks sometimes. I have eliminated heating my bottles thinking could be condensation. Also set a timer to be sure it is stirred and mixed well. Scraping the sides etc… I can’t figure out what I’m doing to cause the inconsistently.

@kacperserafin3858 Жыл бұрын

Is the straight from mix coster vs 10 min coster, more flat in first case? It looks like that, when you see light reflections straight from mixing looking glass flat when in the 10 minutes waiting you can see light breaking in the not even surface, isn't it?

@carolynwarhurst3395 Жыл бұрын

I am so curious now, my tumbler i just made which is my first one ever. The epoxy keeps creating holes where the epoxy just leaves a circle with nothing.. I’m not sure what I’m doing wrong

@ReneelovesGod 3 жыл бұрын

What do you do for protection from the harmful effects of epoxy? I’m just learning

@SandysOrganizedChaos 3 жыл бұрын

Nitrile gloves are always recommended. A respirator is always encouraged if the area you are working in is small and cannot be properly ventilated. When in doubt, reach out directly to the company of the epoxy you use for proper usage. I use Alumilite and I recommend subscribing to their KZfaq channel and watching their videos all about Amazing Clear Cast. Here is a great video about properly mixing and what they recommend for safety equipment kzfaq.info/get/bejne/fdSEl6ybybCRdn0.html

@caligwood3042 3 жыл бұрын

When using epoxy on a powder coated tumbler. Do you have to sand it and spray paint it first or can you go right in and add epoxy and glitter then decal it

@SandysOrganizedChaos 2 жыл бұрын

I would give it a sand and repaint just to make sure your epoxy has something to hold onto. Sometimes the powder coating is a bit slick.

@user-il6of8gj4u 3 жыл бұрын

Help! My tumblers are having issues. I have a TON of resistant areas. What am I doing wrong?

@nicoledickel4360 2 жыл бұрын

Great video! It is hard to rub the epoxy on my cup it is thick and sticky which makes it tricky to rub on the cup. Any tips? I mix it and start putting it on. Thanks 😊

@SandysOrganizedChaos 2 жыл бұрын

Thank you! 🤗💖 as for your question, is the epoxy hot when you apply it? Warm is ok, but hot means it is in the middle of activating which will make it SUPER thick and sticky. I suggest applying it a bit sooner so you have time to work with it. I find a good open time for applying is before about 5/10 min after mixing. I find after that point it gets to that hot sticky phase. I hope this helps! 🤗💖

@nicoledickel4360 2 жыл бұрын

@@SandysOrganizedChaos yes thank you! So just let the epoxy sit for a bit. I didn’t heat it up before applying to my cup.

@amberlylopez1535 3 жыл бұрын

It is recommended to use a respirator with this type of epoxy? And can we do this outside ?

@SandysOrganizedChaos 3 жыл бұрын

You always want to follow the warnings on what ever brand you use. Alumilite has a KZfaq page as well and shows lots of helpful information. From them I’ve learned that if you are in a very well ventilated area you don’t need a respiratory. If working in a small area with no ventilation use your respiratory. This is a helpful video I watched from them. kzfaq.info/get/bejne/fdSEl6ybybCRdn0.html

@catstazz1 2 жыл бұрын

How do I get the waves out? Everything is level and I'm still getting waves around the cup. Very frustrated

@karlaobrien3168 Жыл бұрын

When you use the last epoxy method where you put the chunky glitter, don't you have to epoxy again over it?

@shenanigans50 2 жыл бұрын

Help! My epoxy seems to have dips, digits or craters…what an I doing wrong? I am stirring, mixing and scraping the sides but nothing seems to be helping 😩. Any ideas??