"This car is never going to make more than 1000-1200 hp" - that's what we all try to tell ourselves Hayden!

Looks so good!! Can’t wait to see it rip

Have never seen a roll bar built this way. It does save a lot of room inside the car. Your friends and ego brought you to this point. Watching all your friends building cars to race, them egging you on to get involved and have as much fun as they were having. Pier pressure is a very powerful thing! It is hard to fight! And then you gave in and your ego took over and here you are!

Never ever doubt Hayden and his fronius they can do anything that needs doing

Awesome job man! That thing is gonna be crazy strong!

hayden deserves a sponsorship from texas speed ( a nice 427)

Happy Birthday Hayden !!

Late happy birthday Hayden! When thing esclates is when you still feel it has potential to go faster. It's a deep hole when you have feel for it and comes with ideas that would/could work. Feels like you stepping up big time and then there is much about safety involved. When you are getting really fast. It's for a reason all of the safety features is there. Cause when you get the power down to the ground and it sticks. You are going up in crazy speeds on the tracks. And things happens sadly and then you know why you took the safety of things seriously. If you don't then that's the last thing you do in life many times. So looking forward to see the RX7 goes fast and protects you this season. Will be awesome to see what you are able to be doing on the tracks! Shoutout from Sweden

Doing a Great Job. Also Happy Birthday 🎂🍻

That's a cage a zoo would be proud of :) Happy Birthday Hayden keep grinding bud!

You're a savage!! Welds are always fire and now you're the first person to de-unibody a unibody I've seen 😂😂 usually people just cut the floor entirely to be lazy

You know I have to say at first I wasn't sure about your videos but now I love just the complete brutal honesty and rawness of it. And even though it's completely inevitable once you hit like two 300,000 viewers like all the people to your immediate left and right try to keep it humble and shoot all the videos yourself and keep it real.

Love the fact that your showing the progress on the build. Keep it coming!

Happy birthday bro keep up the good work

I know the feeling. A twisted Axle turned into a full frame off restoration on my 69 Bronco... I wish I still had it .

Cutting floor makes things so much easier. But your car looks good regardless can't wait to see it together. Best looking 240 I've seen.

So glad you’re finally doing this!

Happy Birthday Big-Dog!!!!

The triangulation in that cage design is crazy! Awesome progress from the truck all the way to this wow!

Coming together nicely, I’m learning a lot just by watching. Never made my own cage before, thanks for going over why you’re doing what you’re doing.

Lucy is a sweetheart

Looking good man their car is going to be so much faster and more consistent this race season can’t wait to see the progress and race time

I know this will be a little late, but Happy Birthday! Nice work on the cage, dude!

never makes a new video legend has it he's still welding the huge gaps

Happy birthday!

Looks great dude, but hell of lot of work though. Much respect. Great job! And of course congrats with your Birthday brother!🎂🍾👍

happy birthday mate awesome work your doing there I bet you like that cordless pedal for your welder

Yeah happy late bday bro.. I just turnt 29 myself.. we gettn wise not old!!! Car looks good keep up the killer fabn guy!

I like it, looks plenty strong!

This car is never going to make more than 1200HP. *cut to a little while later* "what's up guys, just finished building a 632 big block shooting for our first mid seven second pass"

Looks great

looking good so far good work. and happy birthday

Wow Nicely Done! I hope some day I can weld like that! My welds usually hold ok but aren't much to look at lol 🤣

Your crushing it! Keep it up brother.

Happy birthday my ninja nothing is better than getting stuff done on your day 💪

Awesome work!

Looks awesome, now you can concentrate on going fast 💪🔥🇦🇺

Hell yea brother happy birthday Hayden mines on the 1st hope you had a great one

Good show, cool dog!

Great Job!! Hayden..

Love this stuff! One of these days I'll have my own fab setup.

Damn man this is sick. Thanks for showing us the process. Why does one side have a bar the other doesn't?

Looks real good

What’s really hood with that pibb extra though! I respect it

Hell yeah nice job on that

For the holes in the floor pan you should just use fiberglass to fill them if they are small.

Happy birthday hermano see you april 4th

Glad u redid it ✊✊✊

18x1/2 hand held belt sander won’t put holes just grind the spot weld flat

Great job buddy

Offbeat garage has a really good video on notching. Sometimes you might have a crazy notch you can’t do with the machine and will have to do with a angle grinder. You should check out the video, he uses a website to print out templates that go on the bars to give you the perfect notch. Good luck on the build bro it’s turning out amazing

Looks good great job

Anyone else see the welding light through Hayden's left shoulder at 16:13? Crazy!

Can't wait to see finished product! Love the work!!! See you boosted boiz and pfi really makes me wanna do something to my 95 integra but nobody around here builds cars so I'm lost where to start nothing crazy just a lil 300hp for now. Keep up good work though thumbs up!

I have a feeling the 4 link brackets will be relocated mid season lol, then you will say, damn should of done this before!

Happy late birthday bro 🎂🎉 just cut the trans tunnel and make it bolt in the you will have access to the drive shaft

Nice fab work!

Late happy birthday my dude!

Where did you get the cage book from! That's super nice!

Great job

It's looking good. Another great video 👍👍🇨🇱

Happy birthday bro all the best

Happy birthday ! And I can’t believe you cut your rails out I know people who won’t buy a car if there even dented xD

Started really liking the content

Happy Birthday man.

Stock ones looked like it skipped leg day 😂😂

happy birthday :)

Instant thumbs up squad! *HYPE*

Awesome video Thx I'm trying to install a cage into my Turbo LSX GTO and not sure if I wanted to weld to the body or build a promod like this lol subscribed

Following this build HEAVY

Hell brother this thing is progressing ridiculously fast but I’m pretty damn certain given the speed of things that you’re never going to stick to the 1000-1200 horsepower when you see how much more capable the car is going to be.

Happy birthday ! lol how did we get here ...it was just a ls swapped rx7! 🤣😂

It’s pretty ballsy to cut the “frame rails” out before gusseting, and fully welding up the tube frame to the car. The chassis had to of “tweaked” a little once you cut them out. I guess as long as the doors still close, it’ll be ok. Am I wrong?

Cool build to watch

Hell ya happy birthday man mine was yesterday I'd love to line up with the rx7 in my nova it's an 1/8th mile car too

Damn dogg that looks bad ass ..n happy birthdY to bro 🎂...my son b day is this Friday the 29 💪

Happy birthday Hayden

Every thing I build gets bigger more spensive anyhow looks awesome ✌️

You got there when u realize that kyles mr2 is fast

"how did we get here" cars are always a rabbit hole. sooner or later you'll want 1500-2000 hp lol

Awesome work. I really think you should reconsider redoing your 4 link pick up points though.

you welded it up free standing? aj foyt used to bolt his down to a block of granite to keep it from warping~~

Finally a longer video than norm! Lol

There is some questionable joints and angles in that cage, However it's a pretty good job. Not sure what your background is with fab?

What book is he reading and showing us within the first minute of the video?

From the thumbnail for a second I thought it was leroy lol

I get the point that tying the 4 link into the cage would be the best option...but I also get that you spent like a whole season getting it to the point that it’s finally 60’ing good and don’t wanna start all over lol.

It looks awesome top stuff alot of hard work

Looking good. What kind of filler do you use and where did you get that chassis book?

All the time man... Fir example.. I always wanted a 110 defender... Now because kids im ripping out the stock rear bench seats and fitting modern ones wuth headrests and building a cage to combat the pancake tendancy in a roll... Howd i end up here for sure.

Make the inside frame bolt up to the underneath do you can get the drive shaft out and easyer to work on

nice cage

Funny to see you learn the tire machine and fab up a killer roll cage haha! How did it get this far? Need for speed 💪🏻!! Happy birthday!! You weighing everything going back in ?

My dude, what's your shipping address Ill send you a proper spot weld drill bit

happy b-day

When he hit his head, I felt it on a spiritual level. RIP noggin

R your floor bars going to replace the structure of your unibody frame now?

135th with bells on!

Happy Birthday Are you going to be at Cleetus and cars Indy on 4/18 because I would really like to meet you and that is probably the only one I will be able to make anytime soon

What are u gona do with ur interior parts bro I actually need door panels and rear quarter panels for my first gen rx7