Begode Master Linkage by MyEWheel Installation video

Рет қаралды 3,953

Жыл бұрын

We have been working on this project for the past three months. We offer you a new geometry for the suspension of Begode Master or Begode Master Pro. This upgrade will prevent bottoming of your shock and extend its life because you won't have to pump 300+ PSI anymore. With this geometry, you'll also have more suspension travel. This is a must-upgrade for your Master/Master Pro. The design also allows you to install other types of shocks like Rockshox RL damper 190x51mm, which is the best price/quality on the market.

Пікірлер: 15

@alviszembergs1820 Жыл бұрын

Ooooh! But that cool red colour...

@Onelastrun Жыл бұрын

Awesome video!

@patrickmckowen2999 4 ай бұрын

Hi I dont get it. You did a lay over comparison of the 2 linkages, same lengths, same shock. What did I miss that gives more travel and reduces bottoming out? Cheers

@neilio666666 Жыл бұрын

Would these suspension arms allow room for upgraded shocks that have side angled top up valves like the DNM 38RC?

@danielcox8054 Жыл бұрын

Thanks to Myewheel for my Begode master Nylonove front and rear bumpers they are some great additions for protection. Daniel.h.cox14

@fabienwheel Жыл бұрын

Good 👍

@marineprime 10 ай бұрын

Hello, Good vidéo, thx. I would like to know how many mm win with your triangulation ? In Origine is 25 mm I think.

@tendervlad Жыл бұрын

how much suspension travel in millimeters I get with this one compared with the stock ? Now I run on 260 PSI what I know is that original shock it's having too small travel .... and I can bottom it out quite easily if I want. I'm having rear bumper from Grizzla .... is this one will extend too far back compared with stock ?

@CNGZHKN Жыл бұрын

how many psi should be in this system

@MyEWheel Жыл бұрын

Usually 100 PSI less than the stock linkage. How heavy you are?

@CNGZHKN Жыл бұрын

@@MyEWheel 220 lbs

@MyEWheel Жыл бұрын

@@CNGZHKN 250 PSI must be fine with the upgraded linkage.

@freeforester1717 Жыл бұрын

Begode not clever enough to adjust their own stock parts to make the suspension work properly..

@alviszembergs1820 Жыл бұрын

Chinese are good in cloning not inventing and finishing to perfection. This is an example.

@motiveisdeathakamid2615 8 ай бұрын

Actually one guy i saw at a forum bent his rail... In the suspention because he changed the suspention and swing arms.. the linkages too.. its not bad but keep in mind that.