BEHRINGER DSP1124P FEEDBACK DESTROYER

Рет қаралды 37,582

Күн бұрын

***TIPJAR*** paypal.me/georgedonaldson1
If you’d like to support the channel or leave a tip in the jar if you found this video helpful
IN THIS VIDEO WE LOOK AT EQUALISATION USING THE BEHRINGER 1124P

Пікірлер: 48

@abrahamofei1063 Жыл бұрын

Good teacher. This device has been sitting idle in my rack for several years for want of knowledge as to how to use it until I chanced upon this video. More grease to your elbow.

@scottchilds5726 3 ай бұрын

You are the best my friend, awesomeness

@kentlarsen578 3 жыл бұрын

really clear explanation, thank you!!

@GeorgeEI7KO 3 жыл бұрын

Glad it was helpful!

@boxingday11 6 жыл бұрын

Thanks again George for putting up the video, All the best regards, Carl,G0lka. Catch you on 80 sometime soon 73.

@GeorgeEI7KO 6 жыл бұрын

Cheers Carl, I'm really glad you are finding them useful. I'm no expert by any stretch of the imagination. Hope to hear you on 80 at some stage. 73 old boy.

@user-su5sq5ib3i 3 жыл бұрын

Good video. I just bought one for 30 bucks Canadian funds. Cant wait to get my rack stuff setup

@GeorgeEI7KO 3 жыл бұрын

Good luck!

@user-su5sq5ib3i 3 жыл бұрын

@@GeorgeEI7KO do you make up your own jumpers for the rack gear? And do you use all xlr? Thanks!

@GeorgeEI7KO 3 жыл бұрын

@@user-su5sq5ib3i I do, and I used all TRS

@user-su5sq5ib3i 3 жыл бұрын

@@GeorgeEI7KO thanks!!

@tsarodavid9730 2 жыл бұрын

Lovely

@stixdiamond 2 жыл бұрын

Just got one , how do you set it to automatically suppress any feedback on monitors or FOH ( manual isnt totally clear to me ) , thanks

@AlejandroGonzalez-AGS Жыл бұрын

Nice videos…learning a lot. Let me ask, what kind of pen are you using ? Looks very smooth. Thanks for the videos. Cheers..

@GeorgeEI7KO Жыл бұрын

nothing fancy. Just a ball point if i remember right

@JayN4GO 5 жыл бұрын

Hi George. What freq on the 1124 are you running with the 7300? I’ve messed around with several but have a weird spike at 2k. Care to share so I can get an idea ?

@GeorgeEI7KO 5 жыл бұрын

Hi there, the best advice is to go to N(UN's site and start with the baseline settings he lays out and go from there. Pointless me giving you my settings. You gotta play with it I'm afraid, it's the only way to nail it down.

@JayN4GO 5 жыл бұрын

George EI7KO yeah already been that route

@GeorgeEI7KO 5 жыл бұрын

@@JayN4GO takes time I'm afraid.

@rwelpers 9 ай бұрын

You say boost and cut As if turning the volume up-and-down. I say sharpen and flatten. As If we were speaking about tone. B#

@GeorgeEI7KO 9 ай бұрын

It's all good man. We're all different.

@user-vi6lw8dx5f 3 жыл бұрын

Hello George, In the processing is both the 15 band eq needed and dsp 1124p?. Since they are both equalizer please advise

@GeorgeEI7KO 3 жыл бұрын

In my case i only use the 1124 as EQ as it is fully parametric

@npntube6847 Жыл бұрын

Hey, nice video, but one question: What is the range of the gain regulator in parametric eq mode?

@GeorgeEI7KO Жыл бұрын

+16dB to -48dB

@YU5KBM 5 жыл бұрын

Hi buddy. I just got Ultra gain preamp, Virtulizer Pro, MDX 2200 processor and 32 ban graph equalizer for the ham radio. now in what order after the mic you think equipmant should go I am testing now with pream first for sure then virtulizer and processor an EQ at the end. Thanks Branko YU5KBM

@GeorgeEI7KO 5 жыл бұрын

If you chaeck out the NU9N website and study the 'TX Setup' Section, This will help you.

@user-su5sq5ib3i 3 жыл бұрын

How do you get the best transparent representation of your outgoing audio? Thanks George

@GeorgeEI7KO 3 жыл бұрын

i would get a recording into a flat receiver (not equalized) actual over the air from a friend. I have a video here : kzfaq.info/get/bejne/p8mqnail25zKo6M.html&ab_channel=GeorgeDonaldsonEI7KO

@djmikeuk11 2 ай бұрын

Is there a way to set up just auto switch on and forget it

@jamessisson3703 2 жыл бұрын

I've just purchased a used one on ebay and looking for some information. I run a mobile disco and do occasional karaoke so it's purely for feedback removal although, I found your video very interesting and helpful in understanding the parametric principles. I'm most curious as to how and why a ham radio user would use it. Is it purely to make your voice sound fuller? Thanks for posting.

@GeorgeEI7KO 2 жыл бұрын

We have a very restricted bandwidth. The object of the exercise is to make 3khz sound like its 12khz wide if you follow. Hi fidelity.

@hambone4495 6 жыл бұрын

only thing missing is a pint

@GeorgeEI7KO 6 жыл бұрын

Ham Bone don't drink mate

@John48778 4 жыл бұрын

how to connect feedback destroy to eq, compressor..1.mixer to eq to compressor to feedback destroy to amplifier. 2.mixer to feedback destroy to eq to compressor to amplifier .which is appropriate

@GeorgeEI7KO 4 жыл бұрын

I know how to connect them.

@John48778 4 жыл бұрын

how

@GeorgeEI7KO 4 жыл бұрын

Oh you were asking me how...?

@GeorgeEI7KO 4 жыл бұрын

Send me an email. Irishcustomradios@gmail.com

@John48778 4 жыл бұрын

@@GeorgeEI7KO yes sir...

@gimannp5684 2 жыл бұрын

1124 or fb1000?? Different or no??

@GeorgeEI7KO Жыл бұрын

no clue man. i only have the 1124

@juniorbarreto1935 4 жыл бұрын

uma pena não ser em potugues.....tendi quase nada

@GeorgeEI7KO 4 жыл бұрын

Sinto muito, meu amigo, mas infelizmente não falo português.

@juniorbarreto1935 4 жыл бұрын

pois eh....bom o video

@dennisgarrido5560 Жыл бұрын

so you are also a ham.

@GeorgeEI7KO Жыл бұрын

Yes I am. My Callsign is EI7KO

@dennisgarrido5560 Жыл бұрын

@@GeorgeEI7KO i saw your rig in your vlog that is why i know, i am also inactive ham in my country, from phils, but i was long time ago inactive, i've just saw your vlog and looks great, we share same passion, i am now into sound system too. 73's bro keep up the good work.