Super-helpful and detailed review. As an owner of an older Behringer USB interface and a separate FX box, the Flow 8 looks really capable as a way of combining everything together. The mix coming in as well as a separate stereo input is a nice touch.

Merry Christmas! Thanks for this demo dude

Great review, thank you! My Flow 8 arrives today, now I'm even more hyped (and prepared :D)

Amazing review mate! Shown everything I wanted and needed to know. Decided to buy one now. Keep up the good work!! :)

Awesome review and run through. Thanks so much for sharing this info. And great performance too 👏

great review man!

Thank you for the video very helpful, I'm getting mine today. YES!!!

Cool perf and thanks for your explanations.

2 years later, this review and walk-through is still very helpful, and also enjoyable to watch (and listen to) - thanks! Since it was released, there has been a firmware update to add parametric channel EQ and lots more. But what I wonder is whether they changed the compression so the user can set any parameters besides just the percentage?

Thanks so much sir! Very interesting prodyuct that I haven't on my radar

Great review thanks. 😀😀😀

NICE Review...will buy this

Wow what a nice profesional explanación of the b flow8. Thx

Merry Christmas!

awesome thanks mate

thanks for sharing. think i'm going to get me one. singing and playing is mighty fine.

Beautiful guitar!

Presonus uses a similar system for their level faders on the early StudioLive models. I never found it to be a problem, but some folks may. Thanks for the comprehensive overview.

Great wee review, Thanks for that. Great song too.

Merry Christmas! :)

Really great review, super clear /to the point. I wish this thing had a more versatile channel Eq … also missing a comprehensive parametric on master and auxs .. other than that it’s really excellent

I deal in disco technique and Behringer is a really good brand. World-renowned. Best regards from Hungary.

I'm just impressed that Behringer created something of their own! These effects actually sound pretty impressive too. Thanks for the thorough preview.

Very nice performance at 19:08

Thanks, this is a great review!!! Actually I own a Yamaha AG03 and consider switching to the Behringer, after having listened to the effects in your video. :-)

It was a joy listening to you perform. Thank you! Question: Do you know if it’s possible to reduce background noise whilst recording your voice? Thx!

I was really hoping this thing would have parametric EQ. Edit: It does on the output side for Mains and Busses. You can also delay your mains and/or monitor lines for time aligning your speakers, which is a huge advantage over the equivalent analog mixer.

Hey Scot. Thank you for your review on the Flow 8. Been eyeing this little board for a while now to go with my small band setup. Thank you for explaining the offset function on the faders. I was wondering how behringer would handle setting up levels on the app and having non motorised faders on the console. I do have one question regarding the jack inputs. The manual mention inputs 6 and 8 to be high-z for guitars/bass and inputs 5 and 7 as line level inputs. Will this result in different levels if i patch a keyboard into inputs 5 and 6? Also, have you faced any issues using the flow 8 live (Bluetooth failure, ground loop hum on inputs 5 - 8)?

hi scot. thanks for this great review. i would use for battery powered gigs in the nature where i sit anywhere from 20 to 60 metres in front of the band. do you know the max range i can use my android phone to control the sound remotely via bluetooth effectively ?

Great video! I Really Appreciate it, I was wondering if the flow 8 works with 80 ohm impedance headphones, 250ohm headphones or will it only work with 32ohm?

Hey great video thanks! How many inputs can you record at one time to multiple tracks in your DAW? Looks like you used 2 (mic and guitar) what if I had 4 MiCS or Four instruments? Can I record to the daw multitrack every single track?

Thank you for this detailed demo of the Behringer Flow 8. Perhaps you can clarify how the channels are mapped into the DAW. The manual says that all channels are "pre-fader" channels. Does it mean that channel 1-8 have no FX/EQ and Level-Settings in the recording? What's about the mic gain and limiter? Does the main mix (channel 9, 10) include FX, EQ Level Settings in the recording?

Holy cow!!

Great Voice

hey guy... Great Video you made... I learn a lots staff about Flow8. Just one question, do you use the preamp to your SM7B mic and make it sound great when it plug in the FLOW8. I really interest about this interface.... thx!

Hi, thank you for your video! I have a question... in the app, section SETUP - PREFERENCES - MIXER APP LINK, which is the difference between INDEPENDENT and LAYERS FOLLOW? Thank you!

Hi great video and sorry if I missed the question I am about to ask. So I'm looking at getting this and plugging the main out into my atem mini pro for live streams. I plan on plugging my mic into the flow 8 and also discord chat into one of the line inputs. And possible using the windows mixer to rout my gameplay to another channel. But on the app I cann see a blue main slider with BT/USB on it. What is the use of this slider is it the recording Input volume of the usb, or what I'm hoping is it the gain level of my pc audio output. As ideally I would like to send my pc audio via usb into the mixer and then send it to main out over to the atem. But ideally I would like some kind of control of my pc audio before sending it out of the mixer.

Hi, thanks, would it be possible to plug a stereo synth lineouts to 3 and 4 via the 1/4” and pan them permanently left and right to be treated as a stereo channel? Also is it class conpliant and works well with ipad daws?

From the board, how do you choose inputs 5, 6, 7, or 8? Once selected, can you use the slider under it to control?

Greetings Regarding the compression that can be applied to the microphone, do you think it has any effect? Its umbu to it were? How much do you recommend to be held? MThanks

Hello! Setup is posible only on app ? I mean, i can setup on app and after i use it without app ? Thx!

Muy bueno tutorial

Nice review! Does the mix in Mon1, Mon2 and Phone have Fx?

Once you setup each channel volume and effects, is it possible to save such setup to load it later? Thanks in advance.

Are the effects processed on the input or output channels? so if I record my voice into my DAW with the effects on, will my DAW record exactly this with effects on or is it just for hearing on the output channel? The Flow 8 ist pretty interesting, might get my hands on one of them oh and can you change the tap button lighting? this flashing red light could be really annoying to me after some time I guess

Though I understand the additional channels of the Behringer, how would you compare the Behringer interface/pre-amps to the Scarlett 2i2?

Cool review! One question can this Behringer like a mixer with a aux 1 output sent to a inear system music and voice in different levels? If so then i can give my wife ( singer) this beautiful mixer as a precent a first digital one :-)

Question please, does it have a one press fx just to apply an fx on a specific phrase that u wanted?

Great Review! I have a question though. Do you have to plug the Flow 8 into a wall outlet, or can the mixer run off of your computer's power via USB. I am looking into buying a new mixer and this one looks really promising. (Edit: Also I'm really late to this video)

Nice review! I‘m playing with my new Flow 8 here and the only thing that‘s a little disappointing is the 2 effects channels, which mean that once you start plugging in more instruments you get more and more limited. Better than nothing and good for adding a reverb to everyone and then one special effect for one instrument, like guitar. But that‘s it! As you say, small setups only.

Nice. did u connect d sm7b directly to the flow8 ?

Hello sir . I just found your video while I was looking for info on mixers on google. You seem very knowledgeable so I have a question that I hope you can answers. I have two different pairs of active speakers, one is the Kali in 8 and the other is the Edifier s3000pro. One have xlr balance inputs the other have RCA. Ok the question is. Can I use a mixer to connect both pairs at once so the same audio plays in all the speakers? For example TV audio or streaming devices or also a turn table. If so can you recommend a mixer for me that sounds well and don't break the bank? I thank you in advance and send my respect from Puerto Rico 🇵🇷😎✌️. Be safe.

This is exactly what I’ve been looking for. Will this work well with the Bose L1 pro 16? Thanks.

Thank you very much for this video. You may have said it in the video, but my English is not good enough. That's why I wanted to ask in writing. I live stream on Twitch. What I'm wondering is this. When I use all these effects and digital audio enhancements, will I experience a latency when monitoring the audio? Latency in hearing myself prevents me from speaking fluently. Is it a suitable device for radio broadcasts on Twitch? I use Behringer x1222 analog mixer in my live broadcasts. You know, when I speak, I turn down the volume of the music with a fader. When I'm done speaking, I turn the music back up. Spotify music sound from my computer and my voice from my microphone go to the broadcast as a single stereo mix. In other words, when I add any digital effects to my microphone, my music sound is affected because they all go on the air as a mix. Whereas, I want to make sound improvements to my microphone input and music input separately. Do you think it would be a significant upgrade? Will this solve my problem? For this kind of solution, I normally have to use an expensive and large digital mixer like the Presonus StudioLive 16. And I'm looking for a more compact and cheaper solution. You can also suggest a different mixer. Thank you so much.

Hi brother... Greetings, how much cost?I would like to buy it

If only these little boards had a gate on each channel. They rarely do and I don’t know why. Cool gadget.

Can I assign separate effects for separate channels via the app and/or stack multiple effects on any channel, or is it limited just 2 separate simultaneous effects assigned globally to all channels?

Hi nice video. My question is i have ipad with cubasis, can i from my daw track 1 click for drummer to monitor 1 use, and other 15 tracks send to front of the house. In PA system i dont want click. Thanx i am from slovakia i dont spevak english

Is it possible to use it as an audio interface and a mixer at the same Time?

I have one condenser mic that I would be able to plug into input 1- Now I have another mic the MOVO DUO and I’m wondering if I can split the right and left channels if I wanted to kill one of the two lav mics that it comes as with? Also would I plug this into the stereo input?

Nice video!!! I have a question, can you use the effects simultaneously on all channels from channels 1-8 (or even just channels 1 to 4 specially if there's a vocal group) because on tascam mixcast 4 you can only use the effects one channel at a time so when you decide to sing duet either no effects or only one singer will get to have the effects. Can you use fx1 and fx2 at the same time? I didn't seem to notice if the fx1 (reverb) was mixed/blend when you've set the fx2 (delay) also.

Can you access eq on the mixer, w/o the app?

can you playback from the pc?. For example if I'm doing a set which has backing tracks on the pc and I'm singing and playing at the same time to the backing tracks

I have a question: in the page of the EQ, at the top right, there is a blu button named FULL. What is it for? Many thanks who can answer me!!!

Dear sir What's the best way to connect this console to soundbar with HDMI, opt, aux and Bluetooth?

How many blutooth devices can you have with this mixer? If i want phone, headphones and my guitar?

By the devil I was tempted..to buy this.

How to increase audio interface volume on streaming..actually connected my laptop on obs but comming on low volume .. Please explain my audio problem..

How did you record with audio ang video

Hi I hope you can help me fix this. I just bought the flow 8 and a brand new MacBook. I installed simply put and Everything goes well until after I select the newest version (738 now) and click update. A legend comes up that reads… DFU ERROR 7: failed to prepare dfu update. The mini screen in the mixer stays red in update mode until I turn it off. One time the legend didn’t appear and it continued to update in the simply put but the mixer said UPDATE FAIL. If anyone could help me i would really appreciate it.

multitrack recording ?

Great! Now, where the heck can I get one? Sweetwater never has any.

Great review! Im a solo Christian leader and this looks like exactly what I need.

Please, can flow 8 work directly with an android phone? I mean can it be used for recording directly with an android phone? Thank you

can I adjust the faders on the app? and does that make the fader move on the mixer?

Can i connect any dj mixer to regular pc?

Where can i buy bro.

Do you use the cloud lifter with this mixer?

can i use a different effect for each channel? thanks!

If this mixer had the function of listening to the channel (AFL\PFL), then you can use it as a DJ mixer for small events...

What is the name of the app to download?

Can you add effects to monitors? And where can you find one of these?! I can't find one anywhere.

Hi again !! Maybe this will bother you which I really sorry about this... But I got a huge problem here which drive me nuts..... I got my Flow-8 interface yestday. I pluged all my cable include the micphone (MV7) and XLR main outputs and my earphone.. ofcouse I use the USB cable connected to my macbook.. Then I open the LOGIC , setup the interface into flow8, it's the right setup for sure. I can't record the vocal from my mic, there is no vocal signal into the logic software..... but I can heared my vocal from the earphone.. so hopefully i think you can guide me to play this interface a little bit ? maybe another comminucate way or something else ? very very thx about this .

Can you plug the laptop to play backing tracks or on your phone

Is this out yet? In the U.S.? Where can I buy it?

can you set the usb to a fader as i use a laptop and a mic for radio

Is it possible to add a third effect since there is no AUX?

What are the minimum specifications for a cell phone in terms of power and RAM. I don't want to use my personal phone for that, and prefer to buy a less expensive phone just for the mixer. Can you specify a Samsung Android model and an iPhone that would do the job without glitches? Thanks in advance and thanks for the nice job explaining.

Thank you for this very nice review. I was asking please answer Can we use effects like echo and reverb? When using WhatsApp or Snape Skype applications There is a note that you did not put some connectors that we need when we use Android phone or iPhone

Can I use it without app running? Say I use the physical fader to adjust level and EQ

Are FX available in monitor 1 and 2?

your mixer still alive?

Great mixer but my usb socket broken,need a stronger better power supply - gutted ☹️

oh oh oh oh oh oh oh oh gloria in excelsis deo

Hacked off that these are all over Europe and Asia, but Not-so-Sweetwater says I’m not getting mine (I paid for it back in early February) until April!!!

Can u put delay and reverb together.

Some guitar fx & amp modeling would be nice.

Are the FX per channel?

Where is your multi track recording?...hehe u did mention it in this video...

Can you live stream on messenger with vocal effects?