Behringer Flow 8 - Overview of the Flow 8

Рет қаралды 94,080

Күн бұрын

The Behringer Flow 8 is an 8 input BlueTooth controlled audio mixer. I'm actually really excited about this little mixer. This video is an overview of the Behringer Flow 8. I'll be diving into more tutorials on this over the next few weeks, so keep an eye out for those videos!
Become a member and help support me and my channel: / drewbrashler
Find more resources and downloads at www.drewbrashler.com.
Chapters:
00:00 Intro
00:13 Behringer Flow 8 BlueTooth Control & BlueTooth Audio
01:16 Channel 1+2 - Phantom Power XLR Inputs
02:17 EQ on the Flow 8
04:10 Low Cut on the Flow 8
05:11 Flow 8 Channels 3+4
05:24 Flow 8 Stereo Channels 5+6 and 7+8
05:44 Plugging in a Guitar directly to the Flow 8
06:33 BlueTooth USB Channel
07:59 Configuring Channels 5+6 and 7+8 to be from USB Playback
08:50 Effects on the Flow 8
09:59 Muting Effects and Muting All
10:48 Monitors on the Flow 8
13:20 USB Interface on the Flow 8 - Multitrack Recording
14:32 Footswtich on the Flow 8
15:18 Practical Uses of the Behringer Flow 8
16:52 Conclusion
Products shown in this video:
Behringer Flow 8: imp.i114863.net/6bvnYq

Пікірлер: 150

@DemonsDog Жыл бұрын

I've been using the Flow 8 for a year now. I'm a solo musician, so I just use a single microphone on channel 1 and then plug my Nord Piano 3 into 7&8. Minor EQ, bit of low cut and compression, some reverb and mild chorus on my vocals, and then I turn my vocal mic up a bit higher for my IEM mix than I do for the main outputs. Does everything I need it to. Only thing I would like would be a basic gate perhaps, but I do just fine without it. The micro USB for the power is a bit of a pain though, I wish they used a barrel connector or USB C instead.

@christinamichelle8790 Жыл бұрын

I have been looking for a good tutorial on this board since I bought it in February of 2022. I’ve had to learn by extreme trial and error and , after watching just this one tutorial, it was definitely a whole lot of error on my part. I gave up searching for tutorials at one point (since there really weren’t any) until I decided to give it another search today and am sure glad I did. Thank you for taking the time to put this together. It’ll be nice to take advantage of all the features this board offers me , for a change.

@Justin-yk1cq Жыл бұрын

Thank you so much Drew! Been waiting for someone to put up a video. Learned a lot. I Bought one a few months ago and have been using it for small gigs. Works great when you have 5-6 microphones and need that extra eq on the output to get rid of feedback. Great idea to use it with Smaart! Will be watching for the next video.

@omrikladar-benstine819 Жыл бұрын

I had seen these advertised around for a bit, had no idea the Flow had this much functionality packed into it! Really cool for the price point... Thanks again for another valuable video, hopefully Music Tribe pays you well for teaching the world how to use their products!

@DrewBrashler Жыл бұрын

Thanks so much! And, nope I’m not paid by Behringer for these videos. The benefit is that I can be objective about the gear!

@markfennah4322 Жыл бұрын

Brilliant exposition - thank you for taking the time to doi this 😊

@baron1c Жыл бұрын

I would love to see this in a 12 or 16 input configuration for our youth group

@KajHeGeHaggman Жыл бұрын

Very useful info bits of the Flow 8!

@brianallenstudiotrax Жыл бұрын

Thank you Drew!

@angelojannotti7988 2 ай бұрын

Awesome Video Drew!!!!

@rustedsatellite Жыл бұрын

cool video. bought the FLOW8 as a compromise between my recording needs and some simple streaming. works well if you fiddle around with it a little - it's actually already half the fun to set it up 😆looking forward the see more videos 👍

@cristianclaverol3824 Жыл бұрын

Thanks a lot, keep the good work

@georgjung9466 Жыл бұрын

Super! Thank You very much. Greets from Germany

@MichaelNatrin Жыл бұрын

Great video!

@byronholman9228 Жыл бұрын

Great Video

@83Ginebra 10 ай бұрын

Excelente vídeo!!

@angr77 Жыл бұрын

The Flow 8 control app over Bluetooth seems to have fantastic range. I tried it outdoors at a soccer stadium …and 20 m range was absolute not a problem using an iPhone. I have used my Flow 8 with a usb power pack and got it run for 6 hours. The only drawback is the 16 bit audio implementation of Bluetooth. (The flow is a great family member to my XR18, X32 Rack and Wing mixers)

@oluwaboriodofin2132 5 ай бұрын

Please keep the series going.

@DrewBrashler 5 ай бұрын

Sure! What else do you want to see from this mixer?

@rogueelements 8 ай бұрын

Hi Drew, Thanks for your tutorials on the Behringer Flow 8. I found them very helpful. I'm hoping you might do one on managing the snapshots and the mixer snapshots. I can't seem to get rid of old snapshots or update new ones.

@liviuemanuelion Жыл бұрын

nice job. waiting the video about effects.

@wilfredo.madera Жыл бұрын

Thank you for the video! There are not many videos on the Flow8.

@DrewBrashler Жыл бұрын

You’re welcome! Keep an eye out for the rest as they come out!!

@leewightman8619 Жыл бұрын

Pretty cool .

@redbergskyrkanequmeniakyrk495 Жыл бұрын

Thanks. I have the mixer and few things I miss is remote control of headphone output and noise gate. Then I would be perfect for me.

@sx178 Жыл бұрын

Thank you for the video, it's very informative. Is it possible to use the faders in Audio interface mode to send MIDI Control Change messages? That would be great because in this mode, my DAW handles the mixing, and I would like to use it as a control surface.

@fildok2 Жыл бұрын

Hi, yes more videos please on this. I was about to sell mine until I saw your channel. Unfortunately, I’m a bit out of my depth with the digital way of doing things, I’m in my 70’s and only used to small analogue mixers but I bought my Flow8 mainly out of curiosity.

@toddmarshall7573 3 ай бұрын

I bought mine for the 10 channel recording over USB ability. Are you as disgusted with the lack of documentation as I am?

@fildok2 3 ай бұрын

@@toddmarshall7573 yes, the lack of documentation isn’t good. However, mines now gone to someone who can understand it and make better use of it than me. I’ve gone back to analogue . I see it as a failure on my part but I’m long in the tooth for these things. It’s obviously a cracking desk though.

@toddmarshall7573 3 ай бұрын

@@fildok2 I'm longer in the tooth than you are. It's not a digital vs. analog issue. It's a documentation issue. Even when you use their "block diagram" (which is absolutely necessary), you still have more questions than answers. I've had to learn their equipment like a scientist. I have to try different things and see what effect I get. If I had a schematic (or a usable block diagram) I wouldn't have a science experiment on my hands. And on the FLOW 8, I'm still not fast at hearing something (or hearing nothing at all) and knowing where to quickly go to address it. You have to have the structure in your head... and that's difficult when you first must guess at the structure. Actually Behringer isn't the worst. Yamaha is. But their sounds are so exceptional you put up with them. Yamaha repeatedly tells what you can do but not how to do it. It's all marketing oriented. They try to make a difficult machine simple and in so doing make a difficult machine more difficult. In my programming days we called that a KLUDGE.

@didouram_music Жыл бұрын

Congrats for your clear top level presentations. QUESTION:I WANT TO PLUG MY FLOW8 to a battery so I can use it anywhere, do you know a specific model that would provide at least a 4h autonomy. Of course not bigger than the Flow8 itself:) Thx a lot for your expertise.

@michaellitton4380 3 ай бұрын

Hey Drew. Big fan. Thanks for everything. Could you do one more Flow 8 video doing recording/streaming. Thanks man

@សន្តិភាពកម្សាន្ត Жыл бұрын

can you make video how to use FX for vocal on Flow 8?

@rciancia Жыл бұрын

Drew, can you cover X32 EQ setting for Roland Electric drums in the future

@bulentozkan5934 Жыл бұрын

Hi Drew it is a great video.Thank you. When i plugged my headphone jack to monitor one or two i am getting mono sound which means sound only coming from left. We would like to connect 2 headphones to the flow8. Is there a way to get stereo sound from the monitor 1 or 2 without a converter cable ? Or the best solution is a headphone amp like Behringer MICROAMP HA400 ? Please let me know what do you think...

@matvex829 Жыл бұрын

Really like a live stream podcast tutorial Multitrack recordind demo. Live performance mix demo Effects and sends tutorial Maximisizing its built infunctionality with a daw.. Tipa and tricks video Review and opinion on the quality of effects eq compression etc. Also a question. Could you connect 2 of these to a Daw and record twice the channels? Cheers.

@borisrecke 8 ай бұрын

Please explain the saving options for mixing scenes

@mfkrwill Жыл бұрын

i think im going to pick one of these up to handle my in ear monitoring at shows. since i can add some compression to my in ears to my vox and i think itll help my performance and help with not blowing my voice trying to hear myself. Could i set the monitor outs with different effects? Like if I wanted my headphones to have the FOH mix and my own mic with compression activated, could I set my Main L out to be just my mic, maybe with a slapback delay on it? so essentially have a mostly dry vocal send out to the Front, but have my own in ears be processed a bit heavier

@user-hf1gh7zj6e 15 күн бұрын

Hi and many thanks for your videos! Is possible a tutorial about using compressor in Flow 8? About rhe response se of the lights yellow and red... your preferenxe of settings. Thank you!!!

@clboun Жыл бұрын

Thank you Drew - Learned a lot from your 7 videos - Could you tell the difference of use between snashot library and mixer snashots - thanks

@clboun Жыл бұрын

I answer to myself - snaspshot library is stored on smartphone and mixer snaspshots are backuped in Flow 8.

@TheJazzsaxo Жыл бұрын

Hello Drew, thank you for your in depth analyse of this mixer. Saw this mixer a couple days ago, but didn't even raise an eyebrow. Looks oldish on the outside, but after watching this video changed my mind. One question, you said that you can pair via Bluetooth two devices. Do they work simultaneously, for example. I want to play Backing tracks from a tablet but control the mixer with my phone. Is this possible and do I get break ups on my audio if I use the controls? And also, how good is the Bluetooth for audio streaming? Because last year I purchased a battery powered speaker from a very well known brand but the Bluetooth connection is constantly breaking up, causing glitches in streaming audio. So for a gigging musician this is a nono. Have to use cables and this wasn't the purpose of the speaker. Thank you in advance!

@toddmarshall7573 3 ай бұрын

It's as if you have two blue tooth devices... one for the audio, one for the control. And they can be to two different physical devices. For example you can pair your PC to the audio blue tooth and your phone to the control blue tooth... and then control it remotely from an app on the phone. Of course you can have the phone be delivering the audio and the control. But you can't have two devices delivering audio simultaneously (e.g. PC and phone).

@nocktunes3172 8 ай бұрын

Thank you for these Flow vids. Curious if you know how good the ASIO drivers are when using it as an interface, regarding latency with plugins and soft synths? Example scenario: plug guitar in hi-z input and playing through the Guitar Rig plugin. I have an X32, do they use a similar driver perhaps? Thank you.

@toddmarshall7573 3 ай бұрын

Behringer website has the driver you need to interface this with you PC. Latency is just a few millisecs as I recall... but the driver tells you.

@guitarmuso1 4 ай бұрын

I wish they would make a flow 16 so there would be more mic inputs that would be a great buy.I have used the flow 8 for 3 years and its amazing

@mattkaz9604 Жыл бұрын

I forgot about these. They popped up a fair while ago, got a bit of press, then I never actually ever spotted one in the real world for some reason.

@GuitarJeff Жыл бұрын

This is a nice little mixer. I currently use a Behringer Xenyx 1204 for my home personal use. So for example practice i hook up my kemper for 2 xlr, mic for 1 xlr and then computer playing audio. I was using a full x32 rack that use forn the whole band but hooking up unhooking weekly etc. The Xenyx gets the job done but hasn't been my favorite purchase. It just doesn't sound close.to x32. How does the effects and sound quality on this compare to the x32? I do realize they are diff devices but looking for something to replace the xenyx as sound quality is not as good. Also to kind of sit at home experiment with effects on songs, mics etc without the big x32. Anyway this looks extremely promising. The only thing I think the missed on this was midi. Do you know if it does midi via bluetooth? Might be a great later feature. As midi bluetooth controller continue to gain ground.

@DrewBrashler Жыл бұрын

I have not done a comparison side by side to the X32 and the Flow 8 yet. But the EQ adjustment on the Flow 8 would give you more control than the Xenyx. The effects are good, I wish there was more adjustments for instance low and high cut, but I imagine Behringer is trying to keep this a simple mixer, so adding functionality like that would make it a bit harder to use for some. I believe the MIDI is only via the USB at this point. But that would be an interesting feature!

@deehive Жыл бұрын

nice vid. i use this for my home karaoke

@cosmiciron Жыл бұрын

Love this product! Question: input 3 and 4 with the combo jacks are for microphones only? I tried to plug in my guitar modeler via an XLR cable but could not hear anything except some distorted sounds no matter how I adjusted the gain level. This led me to believe these inputs can only take microphone level signals. Is this correct? I guess I’d need a DI box to use these ports with my guitar modelers? Than you!

@toddmarshall7573 3 ай бұрын

The combo jacks accept TRS or XLR. But both assume they are mono balanced. If you want stereo and you have it on a single TRS you need to split it and use two channels. You can refer to the block diagram to learn this. In fact, that's the only source I've found so far. What is it with Behringer and their derth of documentation?

@agarth7 Жыл бұрын

Nice video! Can you send de FX in monitors?

@hanye8977 Жыл бұрын

Love to see more videos about this. Can you do a video about sending out mic(audio) to PC(abletone live) and return back(monitor sound) to flow8 through same USB line routed to monitor (LR) on record mode. My sample rate is 64 and delay is not noticable but returned sound quality is not exactly same don't know why. Delay is not just about timing? Does it has to do with sound quality as well? As I increase the sample rate not just timing but the sound quality changes as well. I can't find any explanation on this. Thanks.

@DrewBrashler Жыл бұрын

Interesting! I’ll make sure to add that to the list of videos for the future. Are you doing any processing on Ableton for your microphone? Also, if you were blending the direct sound of the mic to the delayed sound of the mic through Ableton, this would cause the two sounds to alter the overall sound in a bad way. So that might be what you are hearing. Hope this helps!

@hanye8977 Жыл бұрын

@@DrewBrashlertested with no processing, audio is out from main channel 1 and return back through USB 1/2 routed to monitor(monitor channel 1 fader is all the way down) to hear only the returned sound not the main out(channel 1 mic) but I feel like there is blending going on. If that's the problem I don't know how to fix it.

@PeterD513 11 ай бұрын

Hi Drew, Thanks for taking my question. I'm using flow 8 in streaming mode to manage multiple mics in an auditorium venue while streaming a presentation via Zoom. Those mics need to be amplified in the auditorium while. My interface to the auditorium's sound system is via a HDMI connection. Remote callers need their voice to be heard in the auditorium. It has been suggested that I also use VoiceMeeter to get audio signals to both the Zoom App and to the computer for the HDMI. Do you have any pointers on how to configure F8's routing settings so that I don't need VoiceMeeter. Or do I need VM? Any recommendations on my setup would be appreciated. Peter

@andrewgibbons2241 Жыл бұрын

Are the faders motorised? If not, how do they work in relation to the apps?

@veneciuc Жыл бұрын

They're not. Everything you modify on the application, on the mixer remains modified (only as sound, the faders remain in their position). When you raise or lower the faders on the mixer, their position changes on the application.

@TomCee53 Жыл бұрын

There is an led which indicates that the fader is out of sync. The physical fader has no effect until you move it to the sync position and the light goes out, then you can change level with the fader.

@huktek 11 ай бұрын

@@TomCee53same as the P16 EQ then

@AdamHougham Жыл бұрын

Thanks Drew - looks like a great bit of kit - it just went to #1 on my mini mixer wishlist! Can additional phones be connected so band members can control of their own monitor mix? I didn't see if the faders are motorized, but assume so or switching between main/ monitor or phone controlling would lead to some pretty interesting results!

@ppmtv-qh9qk Жыл бұрын

Hi Adam - the faders are not motorised. If you switch from the Main mix to a monitor mix the faders stay where they are - but the mix will remember its settings. If the fader is not where it should be then the led on the channel will illuminate to alert you. When the move the fader to the point it 'should' be at it will then become active to change the level of the mix. The small led screen shows you where your mix level is in relation to your actual fader position. Sorry it's harder to describe this than to show it! There is an issue with the mic amps check out the video - kzfaq.info/get/bejne/osWXmdGkr83eg2Q.html Ta like, ppm6.

@mattg1094 Жыл бұрын

can i use this for multitrack recording into an ipad??

@jasonreales3840 Жыл бұрын

Question, would I be able to connect my Akai mini controller via midi or what are my options? Thanks.

@manchovic9466 Жыл бұрын

I have a home studio but one pair of monitors. can i used this to connect my abelton live from my laptop and my dj mixer to this so i don't have to switch cables at the back of the monitors every time and have both laptop and dj mixer connected to the speakers at all time?

@LennyKMusic Жыл бұрын

Can channels 1 and 2 be used as line in XLR or only as mic XLR?

@borisrecke 8 ай бұрын

please explain the width function in the EQ

@jacobstewart4035 21 күн бұрын

Would you be able to tell me how to adjust the compressor attack, threshold & make up gain??? I don't think I saw it in this video or any of your tutorials yet (or in any other general searches I've tried). Is it even possible to adjust these parameters?

@TheChaziv62 Жыл бұрын

THANKS!! I've been using mine with my stage keyboard rig and it's amazing. The only downside is the ABYSMAL documentation from Behringer. What's up with these companies that don't have a technical doc group to write up a proper manual. Leaves us to just sit and "figure out" the features.

@sboy1955 Жыл бұрын

Do you see any stereo or multitrack recording capability via Bluetooth for iPad/iPhone.. e.g., Garage Band?

@cristopheraguilera263 Жыл бұрын

I use that for small gigs just to play music through speakers

@DrummerDaveRaheb 5 ай бұрын

I'm a professional drummer who uses the Flow 8 purely for my monitor mix of 1. tracks, 2. click track, 3. vocals, 4. instruments, for my in ear monitors. I'm running 1/4" cables from the sound board to my Flow 8. Can you show me a quick way to set up my Flow 8 to do this. I'm a newbie to doing this, so thank you so much for your help Drew!

@deanr42 Жыл бұрын

If you have two means speakers in a sub, can you use it?

@PeterD513 11 ай бұрын

Hi Drew, What are the input and output sound settings (property sheets) in W11 when using Flow8? Anybody? Thank you.

@placidbeach Жыл бұрын

So I assume I would plug in a 1/4 inch TS mono out from my HX stomp guitar pedal into 5 or 7 right? Confused me a little bit since the guitar symbol is next to six and eight but that's because those are if plug high Z instrument directly in with no pedal correct?

@Jake_B74 Жыл бұрын

I saw you slide the sliders for each channel, and the corresponding channel sliders in the app moved with it. My question is, does this work the other way? Can I drag a slider in the app and adjust an individual channel's level remotely? I have a Bheringer mixer currently in my home karaoke set up, and it would be nice not to get up and make an obvious adjustment when a singer gets up who needs a level adjustment.

@philiptong4978 Жыл бұрын

Yes of course, the app is basically a remote control interface, but do realize physicsl faders on flow8 are not motorized due to cost

@freddyramirez3074 13 күн бұрын

Does anyone know if you need a phone to adjust the EQ, or are you able to the parameters on the little mounted screen?

@alwynnywla6009 Жыл бұрын

Umm... Reverb, non-time based effect? (9:20)

@ericsam4677 Жыл бұрын

Can the behringer flow 8 be used for drums mixing

@donm1547 Жыл бұрын

Hi Drew, this question is not about the Flow 8, I apologize. The X32....Can the front USB audio playback be routed to the P16? We can't figure this one out.

@radioraj1 5 ай бұрын

Most of audio interfaces has an ability to regulate the ratio "what is on input vs what is coming from DAW" (i.e loopback feature) - does Flow 8 has such possibility, and if yes - how it can be realized?

@TedLester 9 ай бұрын

Drew, hopefully you can help me with an audio setup issue. On my Flow8, I want to be able to monitor all Mains output post fader, with the exception of the mic. I'm doing this to get 0 latency on the mic channel. I have an Aokeo mic with USB & line-level analogue outputs, and have connected the line-level to Flow8 channel 1. I would like the monitor mix to include this mic channel. Can you help me with the correct wiring and routing for this? Thanks in advance.

@cesarjeanchristophe339 Жыл бұрын

hello my friend can you make us a video where you explain how to put effects in the buses thank you your video really helps us thank you very much for that and good continuation

@ariakiss 6 ай бұрын

Pity it couldn’t have separate faders for each channel like older analog mixers 😂. So many features in this beauty. Im gonna get one. Might take a bit to learn how to use

@OscarCorreaMarrito 7 ай бұрын

Is there a way to control the phones volume from the app?

@djcalarasidjnuntabotez-djm2073 8 ай бұрын

How to recommend volume calibration

@ridney5586 11 ай бұрын

Can you use external effects/plugins using USB?

@divinesoundandlighit Жыл бұрын

are the faders motorized from the app?

@koenighaunstetten Жыл бұрын

What I'm missing is: You said the microphone inputs are mono, but is there a way to pan them between left and right channel?

@jscan Жыл бұрын

I neither have one nor used one but that's usually the purpose for a/the mixer, and the output is stereo, so I would expect yes.

@johnschalk1271 7 ай бұрын

Yes, there is a Balance slider in the app that adjusts the level going to the LR main mix. It is on the same page with the Eq settings. Tap the channel number at the top of the Main window to open up this page. I'm still pretty new to the FLOW 8 so I can't tell you if you can adjust the balance on the channels from the mixer itself.

@guitarmuso1 4 ай бұрын

Anyone got a fix for annoying hiss coming from the the output when the vocal mic is faded up please?

@kresimirtomasovic4891 6 ай бұрын

Hi Is there a compressor function....

@gurozawa Жыл бұрын

is there a way to plug in headphones into monitor send so the sound is in both ears? bc there only seem to be one no matter what i do also great tutorial, manual on that thing is sh*t

@dongatlyn 11 ай бұрын

Hi Drew, I just ordered my Flow 8 and was wondering if there is a way in the settings, either on the actual mixer or on the app, that will allow you to use 5/6 & 7/8 as 4 independent channels. I am a solo one-man-band worship leader and use a drum machine with the Kick, Snare/Toms, & HiHat separated into 3 different channels on my regular analog mixer. Can you possibly suggest the best way to utilize the last 2 channels (5/6 & 7/8) and still have some kind of isolation mix control for kick, snare, & hi-hat? I can do some individual tweaking/mixing on the Alesis SR18 for each drum, but I want to keep them on separate channels, if possible. Any thoughts or suggestions would very appreciated before my Flow 8 arrives soon. Thanks!

@dongatlyn 11 ай бұрын

I only want to run a mono mix through my mains.

@tomkent4656 Жыл бұрын

Can you use this without the bluetooth?

@ArturoVillanuevaJr 2 ай бұрын

I bought the flow8 a few days ago, and it’s frustrating that the eq for all the inputs (the main mix and monitor 1&2) are just in one function, for example if i changed the eq of the input 1 from the main mix, my monitor 1 and 2 eq on input 1 will mimic the changed from the main mix. I hope there will be an update to have a seperate eq mixes for all the inputs that will not affect the eq settings of monitor 1&2 or if i changed the eq of one of the input on monitor 1, monitor 2 should not be affected of what ever changes of the eq settings from monitor 1. Thank you in advanced!

@toddmarshall7573 3 ай бұрын

I've had mine for about a year. I've been exasperated at the dearth of documentation. Even in this simple overview you reveal things I've not seen documented anywhere. Can you supply links to written material that gives you this information. For example, where moving a fader and then simultaneously pressing main and selection enter to turn phantom power on and off. I've not seen it documented and only found it on the app by grope. Hope I find the links by the time I view all these videos.

@MrJasonsand Жыл бұрын

I’ve had this mixer full out with my iPad on multiple occasions in the middle of a backing track.. any response to that?

@Auska64 Жыл бұрын

What about noise gate

@lombybedlam Жыл бұрын

If this mixer had the function of listening to the channel (AFL\PFL), then you can use it as a DJ mixer for small events...

@DOENERUSCHI Ай бұрын

Hi! Just to be sure: the "width" setting could also be labeled Q, right? Higher value does not mean more width, but higher Q?

@leewightman8619 Жыл бұрын

Can you record on separate channels? I bought a like bomge usb mixer that records onto usb has Bluetooth too but want something that records on separate channels

@Slingshot4FunTW 4 ай бұрын

is good for your case?

@callumvandamme Жыл бұрын

OK, I have a very specific question. It's probably already been answered but I'm clueless about these things. I wanna stream drums on Twitch. I have Rolan V-drums and an XLR mic. The drums only have a headphone out, but they output in stereo, so I have a 3.5mm to 6.3mm audio L&R (Red & White). The drum module has Bluetooth in so i use my laptop to send audio (music i play along to) into the drum module, then the module into the Flow8, then into the PC and send that to OBS as an audio source. If I use input 1 with XLR mic and the jack inputs for the drums, will I be able to stream and directly monitor the sound using my headphones with the Flow8?

@toddmarshall7573 3 ай бұрын

All inputs are balanced mono. If you have stereo on a TRS you need to split it to two mono TRSs and use two channels.

@Ogschweppes Жыл бұрын

how to connect flow 8 to pa

@DJ-SPARKY-REACH-ON-AIR Жыл бұрын

well well nobody can answer this with multi jack combo as i wanted to put my laptop from a 3.5mm to 6.35 mm stereo or mono but it sounds so bad so i had to use 5l and 5r on fader 5/6 but it works ok but the main pc is on 7 and 8 fader works fine but i wanted to use the combo jack sockets ?

@philiptong4978 Жыл бұрын

wouldn't it be easier to 1. install the usb audio driver to laptop 2. select either USB1/2 or USB 3/4 as the windows or software playback device, use 24bit/48kHz 3. unmute BT/USB channel (or ch5/6, 7/8) on flow 8

@bansheeparadox2678 Жыл бұрын

Hi just bought the flow 8, i put an fx on my mic and connect my ipad as source music but i notice both mic and music has an fx, how do i remove an fx on music

@philiptong4978 Жыл бұрын

does turning off the iPad channel fader in fx layer helps?

@zakharchiksm Жыл бұрын

Hello Drew. please tell me why the overall equalization curve is not displayed on android devices?

@philiptong4978 Жыл бұрын

setting > preferences > turn off EQ Full Parametric

@zakharchiksm Жыл бұрын

@@philiptong4978 thank you🙏

@SmartTV-wk7ow Жыл бұрын

Your bright white background is such a hard watch ... Thanks for info

@helmuthlindlar3654 10 ай бұрын

I have a Querstion - Maybe you can help : Ist it possible to connect to the App via bluetooth with different android and apple devices at the same time to controll the knobs and faders. I Tried I pad and Android Pad but I could not connect at the same time. As soon as I put my flow 8 in Blutooth pairing app the device that is already conected looses connectivity

@johnschalk1271 7 ай бұрын

The following comes directly from page 26 of the User Guide: "Only one Bluetooth device at a time may be used to control the mixer via the control app. Audio may be streamed from a separate Bluetooth device or from the same device running the control app, but a maximum of one audio device and one device with the control app are allowed at the same time."

@senacht Жыл бұрын

A lot of menu diving. I’d prefer something less pretty looking with more settings on the same page. Is an iPad version available?

@helmanfrow Жыл бұрын

Reverb is a time-based effect.

@ppmtv-qh9qk Жыл бұрын

The Flow is a flexible mixer with loads of option for the money, but it has a series problem in regards to its mic inputs kzfaq.info/get/bejne/osWXmdGkr83eg2Q.html

@majiidsalim1703 8 ай бұрын

I'm using it for a show, for IEM. And for a minute there wasn't any sound on the channel, then I noticed the yellow LED above fader 1 was on. I then turned it all the way down, the LED turned off, and there was sound again. So somehow I managed to mute just that 1 channel. And I've been trying eagerly to do that again, but I don't know how it managed to mute. So anyone knows how to mute just 1 channel? Instead of mute all? (I didn't watch the whole video, just skipped to the mute part)

@johnschalk1271 7 ай бұрын

The yellow LED at the top of the channel on the mixer indicates when there is an OFFSET (difference) between the fader position on the mixer and in the app. Best guess is that you somehow turned the fader for channel 1 all of the way down in the app, which overrode the fader's position on the mixer. By moving the fader on the mixer, you "take control" back from the app.

@majiidsalim1703 7 ай бұрын

@@johnschalk1271 well I never connected through the app, so I can't see how that's a possibility? Never even downloaded it actually. But there isn't anywhere/anyway to mute just 1 channel from the mixer itself?

@likelydaily6767 Жыл бұрын

If you’re interested in sound and mixing, why on earth would you want to send your music signals to the mixer via Bluetooth, which is less then cd quality?

@marcosyy87 9 ай бұрын

One can offer that connection for a client looking only for a great PA to play songs from his own cellphone

@adrianmoore2440 Жыл бұрын

Are you endorsed by behringer?

@DrewBrashler Жыл бұрын

Nope, I’m not paid by Music but they do send me products when I ask for them. Behringer was kind to send me this one as well as a few other products that I’m excited to make some training videos on.