DRYPOINT RA eco Compressed Air Dryer

Рет қаралды 194,422

BEKO TECHNOLOGIES GMBH International

9 жыл бұрын

With the expansion of the portfolio by DRYPOINT RA eco, refrigeration drying can optimally be adjusted to individual requirements: in applications in which stable conditions prevail, DRYPOINT RA is the number one choice; at a varying volume flow, DRYPOINT RA eco devices achieve optimum results at a reduced employment of resources.
Always stay up to date in the field of compressed air. Subscribe now to our free newsletter at the following link: www.beko-technologies.com/en/...

Пікірлер: 13

@martinamarquez5884 6 жыл бұрын

Q no entiendo nada yo pregunte para que sirve un aire dryer30 y no obtengo una respuesta q me aclare mi pregunta por favor me pidrian poner la informacion en español

@bekotechnologiesgmbhintern188 6 жыл бұрын

For better understanding please see our Spanish version: kzfaq.info/get/bejne/adqCqcJ926iZlI0.html

@mdshahdins9624 5 жыл бұрын

I want join direct air host no valve..can't or not

@bekotechnologiesgmbh8519 5 жыл бұрын

For technical questions we recommend to contact our service via www.beko-technologies.com/en/en/contact/contact-service/

@bashermrghani4562 3 жыл бұрын

plz can you sent electric cerct

@marketing-internationalbek7054 3 жыл бұрын

Please refer to our technical documentation department: www.beko-technologies.com/en/en/contact/contact-documents/

@omursani5504 9 ай бұрын

My dryer cooling is fine but the air is passing through the outline it stops after 10-15 minutes no air is passing it is blocked again when it gets cold then it starts again after a while when it gets colder it stops again the outline air is not passing What is the reason for this?

@MukhalillullahMohamadNawi 3 ай бұрын

from your question, seems like your heat exchanger inside the dryer got freezing. u need to check if the freon gas got leaking at somewhere around the copper pipe. sometimes when the freon gas is leaking, then the heat exchanger will become freezing. One more thing, need to check hot gas bypass. some cases the hot gas bypass did not function.

@bekotechnologiesgmbhintern188 24 күн бұрын

Although, the question is rather imprecise and leaves a lot of room for speculation, we understand that air flows in the housing when the dryer is warm and when it is cold the flow stops. This behavior is normal because the case fan runs when more cooling power is needed and the fan stops when its little or no cooling line is needed. It cannot be compressed air because this flow wouldn't stop but be permanent. If you are using one of our products please contact our technical support here www.beko-technologies.com/en-en/contact/