Great interview. I would like to nominate "Mark" from "Sam & Mark Afterwork" from Austrailia

Chase is a good dude. I’ve known him for years, but haven’t seen him in a long time, glad to see him on there.

Y'all started discussing the math on the elr shots while I was driving. I kept having to tell myself to think about driving and not the math. It was making my head hurt trying to comprehend it. Fantastic interview. Eric, thank you a thousand times over for these interviews. They are an absolute gold mine of knowledge.

I’m getting my first 308 bolt action ruger. So excited to get started in the shooting game

David Tubb interview please.

It makes you wonder " whats next". Really enjoying your pod casts and the guests you bring in. Keep it up. Thanks.

What's so cool is guys like this came up with some of the great ideas that help making shooting at these ELR ranges a lot more practical.

What a great summation of the sport and its evolution. Tons of useful information too. The Wikipedia of ELR. Thank you both!

Great interview. Thanks Eric

I really enjoyed this one and your whole series. I’m really glad you are doing this and increasing your content and bringing all of your expertise and the expertise of others from other disciplines to us. Great stuff.

Pump and Eric, nice to see you again, great ELR discussion 👍

WOW...............................mind-blowing, thanks for sharing this topic !!

I went to high school with chase. I shoot long range but 1200 and in. People get impressed by what I do I show them what he does on IG to put some perspective on it. I just dabble. He recently got a hit at 1200 with a .22LR.

Thank you for the knowledge

Watching this right down the road from Pleasanton.

Very , very good podcast. Good information.

my 1st whitetail at 13 was with a 257 Roberts on a dead run. w/ a Springfield A3 action and a Douglas & Davis barrel. Dropped in its tracks and couldn't have been prouder........MY dads rifle and it was because of a debt from a friend. JMO

Nobody ever believes me. But my air rifle shoots 1inch groups at 200 yards. Lol sounds ridiculous, but it really does!! Soo when he smiles while talking about his .22lr shooting 1inch at 200 yards, I absolutely know what kind of work it takes to shoot those groups. And it’s worth smiling about.

Great Series! Been watching Chase since early PSR. ELR is not my cup of tea, but enjoy listening to his discipline to applied to all ranges.

I shoot over a valley and actually thought of flying balloons at the height of my bullets travel just to see the difference between the wind at the ground and at the flight path of the bullet

That's a beast of a rifle.

Awesome

You need to go for it, Erik!

That's amazing

And now we see just how deep the rabbit hole goes. Lol

Erik, your all cleaned up

Josh Kunz at Patriot Valley Arms is also making lathe turned bullets.

Two smart guys.

your the greatest

I learned so much on this podcast. This was great

Them new school guys are scratching there heads on that

Encore! Encore! 👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻👏🏻

Curious on your feedback/opinion on the bullet nose ring. Many thanks to everyone involved in getting this mountain of info/knowledge available.🎯

Great chat guys!! If you want to see exactly what your lrf is doing, clamp your lrf on a known object then look through a nightvision scope or night vision spotter,(not thermal) and you will see exactly what your lrf splash is doing exactly,rgds steve

I love 22LR .. I only have a 100 yard range,so it’s practical.. I get hopeful when professional and competitive shooters also use them.My hope is for much more consistent ammo.Or a feasible way to reload..

Wind veering or backing with altitude is due to Coriolis and is known to every pilot as it's part of the basic syllabus but be aware that it goes the other way in the southern hemisphere.

👍 awesome 😎👍👍

Where the hell are you finding Retumbo lol. I've been looking (in CA) for 2 years without luck. Awesome rifle, shooter and interview. You guys are making me need a 33xc hahaha don't tell my fiance 😆

Their bullet path is more like a mortar rounds flight.

Late to the party But this was a great interview Thanks

Erik, I am addicted to shooting at 1 mile. I like shooting that distance as much as you like f class at 1000 yards. I would love to have an f glass division that was at 1 mile. Guns are accurate enough to be competitive now. I'd love to make this happen.

Erik your so lucky to have friends like this man

Great interview men , what I have to say is the barrel is a tuneing fork it will shoot different from day to day what you want is 0 or close to it on resonance all things are factors.the earth is one radio waves and micro waves ,cell towers and such ,,that's my take on consistency day to day, crazy stuff I know . when a barrel heats up is it vibrating faster or slower.the diameter inside barrel didn't change,so why some get flyers .

Love these series, not too sure about the 'pause' cuts though... There seemed to be some hesitancy to discuss brands, etc. I'm not sure if that is a sponsorship issue or what. Fun interview all around.

Hey Erik, not sure if you’ll see this or not but you don’t need a big cartridge to shoot 2 miles just look up Mark and Sam after work. I took my 308 out to 2500 yards no problem your 7 mm all hit 2 miles easy as long as you have enough elevation in your scope. My first ELR rifle was a 300 ultra meg with a 34 inch barrel. I push the 245 grain burgers at 31 50 ft./s. It’s super sonic out to 2300 yards that shoots 2 miles easy.

Maybe sending a hovering drone at altitude with a wind measuring device transmitting real-time back to the shooter would be useful?

24:49 When you have to turn your head side to side to look at a gun :D

Excelente interview. Any one ever try a MOAB Minute Of Angle Adjustable Base for extreme long range?

Eric, please try to interview Mark and Sam from Australia.

I'm up to 450y with my rimx......love elr(distance varies with caliber)

Get David Tubb on

Where do you get cleaning rods for barrels that long!?

Sorry, I must have missed the model of rangefinder used. Can you tell me what it is, please? Thanks.

Hell ya

Amazing content. Regarding Light Class, will Cadex CDX-40 action & Shadow chassis meet the weight limit at 25lbs when running a 338 Enabler match barrel??

I believe the target won't shoot back

Nowadays a vhs tape is bigger than a stack on mini supercomputers

There was a gunsmith in Colorado (can’t remember his name) that in the nineties was shooting prairie dogs with a 308 at over 3000 yds!

That accuracy bug takes body parts.

Chase did you have your Tactix 7 Pro AB app running on the first hour of that video? Looked kinda familiar 😅

Chase what bag rider set up do you use?

Wow, how much is one of those

Eric when you said "I don't know any real good shooters who shot well right out of the gate" you forgot the guy who you interviewed who set some sort of record in his 1st ever competition and others later in his career. ?I saw the video but can't remember his name.

1hr...we discovered the coriolus effect. Keep in mind at different latitude it won't rotate the same way.

Who manufactures the chasis on that rifle?

I like the 375 EnAbLeR, but components really suck right now for building one

Have to make sure no aircraft are flying in the area! This would be a lot of fun.

If the Charlie's top mirror is 2.5in above the scope axis, whats your AB input for scope height over bore measured at the windage turret?

I think the nose ring mod is not beneficial; it will add drag because it will generate a weak shock wave depending on the depth of the cut. BTW, the wind will 'see' the nose of the projectile as the front of the projectile as it is the cause of the oblique shock.

What's the windage app Chase talks about? I couldn't find it in the app store, I must be spelling it wrong.

I would like to ask how much money he spends (or a professional ELR shooter in general) on just ammo or reloading components each year.

All I can say is cha Ching $$$$$

Chase, Why did you stop using Structured Barrels?

What is the app used for the higher gradient winds ? Please, anyone ? Thanks!!

When all else fails read the directions 😂

What kind of rangefinder does chase have? Why is it being kept a secret?

Should have challenged chase to an arm wrestling match

Cost!!!!!!?

Good video, unfortunately had to sit through 12 ads.

Wish he would say what range finder he has.

Did Eric really not know what 1 moa is at 4000 yards??? He's a world class precision shooter correct? 😒

Why haven't you 2 gone out ELR shooting? You promised 2 years ago!!!!

😂

ELR barrels must be expensive? Are anyone using nitriding to extend barrel life?: "Plasma Nitriding of Inner Surface of Slender Tubes using Small Diameter Helicon Plasma" Citation: Jin, C.; Zhang, Y.; Wang, C.; Liu, M.; Ling, W.; He, L.; Yang, Y.; E, P. Plasma Nitriding of Inner Surface of Slender Tubes using Small Diameter Helicon Plasma. Materials 2023, 16, 311. "Deleted internet address due to KZfaq refusing the comment" Academic Editor: Abdollah Saboori Received: 24 November 2022 Revised: 19 December 2022 Accepted: 21 December 2022 Published: 29 December 2022 Quote: "... For the nitrided HWP, a nitride layer with a thickness of 14 μm was produced on the surface, approximately two times higher than in the ICP nitrided layer. Surface hardening resulting from nitriding can enhance the microhardness up to HV1820, which is nearly nine times higher than that of the untreated surface. It can be concluded that in this study, the enhancement in micro￾hardness is primarily attributed to the creation of γN phase with compressive residual stresses and microdistortions in the high N-containing layer as a result of high concentra￾tion of N+ . This solution can be applied to improve the hardness of the inner surface of slender tubes, ..."