Hot DAMN! I never thought I'd be so invested in watching glass being cut. Great stuff.

This guy is an Artiste, Engineer, mechanic, and a visionary all rolled up in one bloke. You know when he is having a win, he does his little jive dance. 10 out of ten from an ordinary guy

Such an honor to get to watch this guy and his helper create their magic. In my opinion the premier car builder on KZfaq. If he don't know it, he learns it. Always appreciate the videos from you fellows.👍

I’ve watched every single most popular car builder on this planet work. Mike is the ONLY builder I’ve seen that does it all. Fabrication, upholstery, mechanics, body, paint, suspension, electrical, custom design, detailing, glass, exhaust, he’s the only builder I’ve seen to where I can easily say their is nothing he can’t do. He is my main influence in becoming a car builder for obvious reasons. Hands down the best content online for any gearhead. He definitely deserves tons more content on a waaaay more frequent basis. As it’s plain to see, no other builder comes close. Barris, Winfield, Rousell, Hines, Foose, Coddington, Hiltz, Casper, Alexander, Ayala… could never touch this man. And that’s undisputed fact. Serious respect and Admiration goes out to Bello’s Kustoms. 💯💯💯

If you’re not learning everyday you’re not pushing yourself. If you’re not pushing yourself you’re limiting yourself and your talent. Push yourself in the things that make you uncomfortable. Those who are truly gifted in any trade always push themselves in learning , challenging themselves and overcoming. Bellos Kustoms is a great example of always pushing themselves to accomplish the uncomfortable 👏.

Great to see the two big dogs working together again, respect. Great video, great lesson. Mike your dancing is cool. Steve, well done.

When cutting patterns with laminated glass when you score the first cut go ahead and from the bottom before you flip the glass and tap along the score line with the ball end of your cutter to make it follow the cut. Then flip the glass make your second cut and do the same thing it keeps from cracking like it was doing. To cut the plastic after both cuts put some denatured alcohol along the cut and light it for about 10 or 15 seconds and use a razor blade to cut the plastic it makes a much smoother cut with a lot less clean up afterwards. I've been cutting glass for over 30yrs years now and can tell you how to cut just about anything you want

Thanks for sharing. It wouldnt surprise me if Mike started to sew up the interior as well, he can do it all. Cheers, Mike, Big Steve and Carapila.

Bad ass one stop shop!!!!!!!!!! 😎😎

Nice work fellas... I'll be back next time 🌹

Another beautiful creation by a Master❤

Hey Mike, Got my order in last week with two long sleeves and a Hoddie. Thank you, Bro, the quality of your clothing matches your wrk. 2nd to none BrothA 👊❤️. Anybody out there thinking of ordering some merch from Mike. Do it! You will not be disappointed. Thank you again, Mike. Love all that you do, man. Much Love and Respect 👊🙏

Mike's little pieces of measuring tape can do anything!

Awe yeah....... The dynamic duo back in action, Straight LocoChon and El Senor Carapilla busting a move! Waiting for your virtual reality channel to come out soon..... 😂👊👍

You can change the old saying Jack of all trades and Master of ALL! I love when you post a new video.

Breakfast with Bello! Tacos and choped tops, dale shine!

Really fine art in each detail

Nice work. Now you guys cut glass, too. You can't buy experience, you need to live it, but sometimes you can pay for it, and then it's yours. Thanks for the great videos.

The ‘35 has come a long way, what an incredible transformation 👍

Your skill level is off the charts. Awesome job Mike!

Thank you Carnal for sharing your experience with us Gracias.😎

Dude The glass-work is crazy!!! First time I’ve seen it done. Nothing But Perfection Bellos!!!100%

The car is off the hook you killed it catapilla dope as well great job homeboy.

wow mike there seems to be no end to your talent ....your the man .......sweet job

I’m not at all surprised he does the glasswork to his builds I often wondered how it’s done Bello always Continues to impress and amaze me… Thank You for another Great Sunday Morning insight in your shop🤘🏻

Wow Mike you’ve done the owner proud. You fellows jell so well take care. Be lucky. Cheers Tim.

The glass job amazing. One small step for man one huge step for man kind. Like I said prior more skills then a rocket scientist. Lokochon style. From the 719 PUEBLO COLORADO. THE BOX STATE YEYE.

What an amazing transformation. Definitely one we would all enjoy seeing it completed. Once the interior is done much of the custom metal artwork is hidden. Thankfully the owner has these videos to enjoy and be proud of his Bellos Kustoms piece of art.

I always enjoy watching you do your stuff. What I like the most is you're a master at your craft.

This was my number one question when I saw yall chopping the top! So glad yall showed this.

That car came out meeeaaan!!!!👍 my personal opinion is the color doesn't seem like a good choice but I'm sure my mind would change once sunlight hit it.👍👏👏

Someone give this man an award 🥇🏆 G money Lokochon style

Beautiful Mike. I thought that car needed a chop from the 1st time I saw it. It turned out even smoother than I imagined. Big Steve, videography and editing is awesome.

Beautiful job can't wait to see it in Santa maria

I want to thank who ever came up with the idea of putting this man on camera!!!

When you score the glass you should immediately snap it,the process of scoring the glass causes the molecules of the glass to go into motion. Once the molecules stop moving it makes it more difficult to snap,and will cause a run out.

You use a Tape measure in ways I have never seen! Just sitting here shaking my head! I keep watching and learning!

What beautiful job on the custom glass. This ride is getting sexyer everyday bro. Next seats and carpet and this owner will have a smile 10 miles wide. Dang he must be itching to get his wheels home.

The man has no limits

Those headlights remind me of Gary The Snail on Spongebob .. Beautiful car , Chingon Cacheton ! Ese Carapila !

Yo Mike Vato Loco this is coming from an old man that his father cut glass you did very good if that old man would that high dollar sander he would have kick ass he made an A framed belt sander so he could do larger work But Vato you did Good keep up the great Info. Tricks of the Trade The Crazy Old Man In The Yucatan 😎

That car just looks SO SPECIAL.

Mike that thing is awesome...another great example of skill..patience...and attention to detail. Ive never seen you so lazer focused as when you were cuttin that glass. Keep it up big dawg! Steve you keep getting razor sharp with these videos bro! From the technical breakdowns to.keep us layman in the loop to the artistic mastery of catching the shop lights cascading down the contours of the new shape of the car in the outro...Mike is lucky to have you on the squad! Gosh now we just have to see what the inside will look like...whatever you do AL dont just let any chump with a sewing needle take over!😅 Stay on the gas fellas and never let up!

Great job doing glass cutting. Gerry my hubby worked at a glass manufacturer. He said instead of using blade to cut a stuck piece.of plastic next time..try isopropyl alcohol on the cut then set on fire with torch. The heat will melt plastic and glass will snap.off. hint hint..keep dancing ❤❤❤

WOW 👌 👏 😍 👍 OUTSTANDING CRAFTSMANSHIP......AWESOME JOB MIKE 👏

The was nothing I thought that Mike couldn't improve on. But I was wrong. He elevated the production of the videos, by getting the exact person for the job, that make it more pleasing to watch. EVERY second is captivating! Thanks for having the grace to share your craft. I do enjoy it.

Joe, always leading that extra hand , helping out Mike getting things done.

Best way to cut glass is with a haynas nipple in the winter 🤣 Chingon Cacheton ! QVo Pinche Carapila !

That is one bad ass car. I cannot image that someone can still gather up all those decent parts. And then find someone like you to make all them decent parts into amazing parts and to go onto a car they were not designed for and become one awesome ass car. That is a beautiful piece of art. Thank you for taking the time to show us your talent. I have to. Have to watch each week to see if I can learn anything. I don’t have the machines you have but I can still learn and thank you for that.

Good work with the glass Mike. There hasn't been a car you built that I haven't like. I hope someday I can get you to build me one.

When Mike starts singing opera to Carapilla you know things are going Bellos quality.

The final beauty shot of the car was sweet! It looks amazing!

JESUS- Mike, now that the glass is cut, I can unclench my ass. awesome work, you are the Master of your craft! I love your shows so much I would watch you make a lunch box! keep the faith Brother. a fan for life. Mike B.

Great respect for your workmanship.

The admiration is the end result of beautiful artwork with sheet metal and glass. Craftsmanship and technique at it's finest = creativity. I love it all. Thanks for the insight into Bello's Kustoms!

Hey…cutting that glass takes delicate time and patience. So impressed with what it takes! Well-rounded no doubt! Super f%*king clean, sleek work you did on this beautiful car 😎

Mike you got down,I couldn't hold a fork after that work lol

Beautiful , your Da Vinci of metal !!!

WOW! I love the adaptation of parts of tape measures made into cutting blades for the laminate between the sheets of glass. You do it ALL!

I've done enough of this kind of work to know, it ain't as easy as this man makes it look. All respect to you. ...stay locochon..

On top of sheer talent Mike has the willpower necessary to try anything. Be nice if Australian builders were as willing to share.

An amazing Maestro, every video is like watching a MasterClass and true artist!

Mike can do anything involving a vehicle! Happy for a new video.

I just ordered a t-shirt from his website. very entertaining and one of the most talented Builders I've seen...

Wow, I was wondering about the glass in the cars you chop, it’s like you guys knew what I was wondering about!! Nice job Mike!

Mike, Dude I held my breath many times during this episode. Every piece just looks so good. Catapilla is the quiet assitant, props to him! Steve's captures of the essence of Kustom Kulture is so spot on. Vato Loco!

Really like the music ending. Million thanks. St.Paul,Minnesota.

Once again, good job guys! I enjoy watching these classic works of art come together.

What still kills me is how you can get that fucking roofline so perfect just by looking at it and hammering out some metal. Damn. Anyhow, thanks for the tutorial on safety glass... all this time I thought it was black magic. Now I know I can do that shit easy! For gluing the bottom channel to those side windows, Google "glass setting tape". I used that stuff on my '25 Franklin side windows and hinged windshield and it works good. when I fucked up on one of the windows, it comes apart pretty easy with no cleanup required to re-set. Cheers, Jim

Greetings from Pembroke Dock Wales. Having to watch on my phone as the Boss is watching “The Masters” golf but! The upside is I can watch it on the TV later 🛠️

The best there is , and Mike does it all . No pretending , no tool commercials , no paid sponsors and no Bondo covering up shit work...just for money . Talent , experience and love for custom cars does the job

Great admiration for your show and your superb workmanship! You do it right! Look forward to every episode.

Love watching a great artist work . The end result is priceless . Learning heaps cheer bro

Cutting that glass kept me on the edge of my seat, absolutely great👋👋👋👋👋

Amazing…is there no end to your talents? So interesting, thank you for sharing. Have to admire your talent and patience. Car looks awesome. Video looks great too.

You are one smart guy Mike. You do awesome work. Your skill level is amazing.

Damn dude you really build the cars by yourself man. So much respect. ARTIST from the highest level

I really enjoy watching Mike Work. He inspires me and gives me confidence to trying to do it myself.

Always looking forward to BELLOS,GREAT STUFF!!

I’m blown away you were able to make that radius in one piece. Nice job

I watched a glass guy cut a windshield for me years ago, after scoring and cracking he poured lighter fluid on the cut lit it on fire for about 15 seconds to soften the plastic then pulled it away for and easy cut with a single edge blade.

PURE GANGSTER!!!! GREAT JOB MIKE!!

Another magnificent custom!

Gorgeous car. Outstanding craftsmanship.

You are a craftsman Mike 👨🏻‍🎨

Thank you for this video Hommie Mike,my friend has a 39 chevy snd we want to put a new window in the passenger rear door ,now i have the courge to do it ,keep up the cool master workmanship from CholeTown ,Soledad Ca,

I sure would be wearing a respirator when sanding that glass. that dust cant be good for the lungs. Awesome job, Mike.

Another little tip Mike, when putting glass in a car. String the rubbers makes it easy to pull the rubber over the lip of metal.😊

Recently watched an old video of you putting a different grill in an old car You’re obviously great, craftsman Or should I say artist? I was amazed by what you did and it came out You have a great skills and great bravery to tackle some of these projects I’m truly a fan and will keep watching

Nice job on the glass Mike, good that you can do it all in house like that, you got awesome skills man! It’s good to use a respirator when sanding glass like that, that glass dust is pretty nasty on the lungs bro. Have a great weekend Mike and to Catapilla too!

Great video! I often wonder how many of these cars will be around 100 years or so from now. All I know is that I won't be around LoL. New cars are nice, but most have no soul.

Beautiful Little Chevrolet!!

I learned so much from this video Mikey, that I am going to place an order this week for merch and parts because you deserve the support. You're an absolute legend.

Dang I know Mike does it all, but glass too??!! Over the top, beautiful.

Another great video Thanks 👏👏👏👏👏

Fantastic Mike, what a perfect finish it looks stunning.

Very Nice Work Mike Looks KILLER KOOL

Clean 35 Chevy Amazing work Hommie Mike !

You know you're a real artist when you create everything from metal work to paint and class. Been slowly getting through all the vids since finding the channel. Awesome work.

Wow!!! Incredible, you are a highly skilled man!!