I can never get over the generosity of people like yourself for going to such trouble to make a very helpful video. Thanks to it I replaced my belt and rollers without any problems. Many thanks. KP, Dublin, Ireland

An old video, but brilliant for my Vespa which is about the age (old) as this one was when new. I don't think I would've done the belt change without this video. Thanks

Right on, Robot. Just replaced the belt on my S150. Took about four hours...I went slow. Had trouble replacing cover, but watched you do it four more times, and figured out the angles. Much obliged. Just finished test drive and all seems good. Peace. (Cheers for the cameraperson, too!)

Thank you so much for this excellent video. I have a Aprilia Atlantic 200. Although my scooter is slightly different, I was able to use your video to successfully complete a variator roller and belt change. There is no way I could have completed it successfully without this video.

I want to congratulate you for your tutorials which are superbly well done: clear, precise, understandable. I have been following you for several years now from Belgium and it is each time with great pleasure that I discover your creations. Best wishes.👌👍

Thank you Jeff/Robot for a stupendously clear, stunningly concise and wonderfully explicit video. Absolutely the best "how to" I have ever seen. You and your video-person are stars. The speed at which you do this is humbling!

The more of these videos I watch, the more I am convinced that a VESPA is worth the money. Thanks for posting!

now this is how you film a repair video! thank you so much! just bought the wife a Piaggio fly 150 and this was extremely helpful

Love your clear explanations and attention to details and potential "gotcha"s about various washers and bolts. Great video.

Great video!!! I live in Venezuela and recently bought an used 2008 LX150. Great scooter!!! My problem now is that apparently there are no Vespa services down here. Or at least I haven't found one, and I've been trying. With your videos I can service it myself. I've already bought a few parts from your store. Next I'm building a wish list for tools, so I can do a better job. Please keep the videos coming. Thanks!!!

Wish we had robot here in Toronto. Awesome scooter mechanic.

jeff you are a gentleman thank you for your outstanding run through on this greetings from scotland all the best i will be recommending vespa motorsport to all my friends with vespas cheers again

YEAH , SO GOOD!!! I wish I could take my bike to you bro... great vid , great job.....my shop would charge 3 hours labour for that....

very well done video... excellent info, all the right part #s and tools and ... wow, good job

Great video thanks. Although, my BV250 belt I replaced at 23,994 miles and on my BV200 it was replaced at 24,883 and it still looked good. The reason belts last as long as they do on my bikes, is due to my light weight (135lbs) and I accelerate evenly and smoothly on every start. Rollers were changed at 20K miles as well... these are great reliable machines if you take good care on how you drive them. If you are like my friends, and at every stop "pulse" the accelerator, well... Ride Safe!

Very helpful indeed! Thanks so much for sharing :)

Excellent thorough 'how to' video A++

Brillant! Precisely what I wanted to see, clear and excellent description...Thank you.

Great video. Nice work guys.

Great Video, thanks

Thank you. Great tutorial.

Very helpful, Bro!

Excellent way of treating a scooter . Respect that

Awesome, thanks that's a great help

Thank you Jeff and the Vespa Motors Team for the tutorial it is very helpful. Would you share something about the removal timming system drive and stator/flywheel maintenance on a Modern Vespa (LX125-150)?...Regards from Colombia.

NICE clear VID, tnxsss

Great video! Thanks Jeff and scooterwest. When will you open a store in Bay Area? We need you here.

Thanks for the reply. When will you do a video for radiator fluid flush / exchange?

Yes, this process will be very similar on an LX50. Thanks for watching!

very nice video, thank you. would it be a better idea to also remove the air box?

It is very good video. It seems to be that all automatic Vespas are quite simmilar. My ET$ 125 zap04 service procedure is 70% the same. Only dimensions of replacabel parts are different

Is there a Video you do on changing the clutch assembly ? like removing clutch and putting torque spring back in :ect ?

Great Video thanks. I'm surprised there is no grease put on the bushing. Is that right?

muy bueno. gracias. Dime como se calibran las punterias lx 150 .

Excelente video 💯👌

Can we get Robot to open up a service branch in North Texas? The local Dallas shop charged me 2.5 hours for this service, and not sure they used a new locknut. Plus they had trouble getting their mechanics to show up to work! ARRRRRGH! Doing it myself next time!

Great Based on info from this video I felt comfortable about working on my aunts 2009 LX150 that was not starting. I accessed the starter bendix and as expected it was sticking. I'm running into a problem trying to replace a ring clip and washer on the clutch bell. The ridge on the axle shaft is slightly behind the opening in the bell. Any ideas?

Do you plan to make a video for the 300 series Vespa belt change?

can u use impac drive take clutch nut of ?

this Is why I buy from Vespa Motorsport

This is very informative, thank you. I would very much like to see belt change for XEvo 250!

Boy, I wish it was that easy to get the belt cover off my BV200. It takes some serious maneuvers to wiggle it up and over the oil filler and under the rear foot peg bracket.

Can you please show us how to repair or replace starter motor or self starter motor thanks and regards to the anchor

Very professional 👍

good video robot )))) can you please tell me why my variator makes a loud noise ?? no strange noise just loud

Hi, do you have a video for the 200 GT i need to replace the crankshaft...

Thanks a lot buddy video saved me dad removed forgot how to put back

What do you reckon on leaving out the holding tools and using a couple of torque sticks instead attached to an impact ? a 45ft lb and a 65ft lb.

After putting my belt cover back on and tightening the bolt to the clutch the rear wheel won't move. What do I do?

You're the best man!!! How do you get any business if you're teaching us how to do the work?

THANK YOU for the very detailed video. My Piaggio MP3 500 was more involved.

I own a 2009 LX150 any videos on how to fix the carburetor , I haven't use for three years I try to start but the carburetor leak fuel. Any suggestions Thanks

do you think that if the clutch dosen't disengage at Idle with piaggio engine it could stress the drive and clutch etc or do they design it in so it won't? As my new piaggio 278cc is currently always in "drive" even with a hot engine although not enough to push the bike along with a closed throttle.

i want to upgrade the fuel hose with samco hose, what size should this baby get? 3mm, 4mm or 5mm diameter

My LX150 leak fuel is this regarding the flotation level ? how I can repair .

i got a squeaky sound from my vespa vx125 whenever i try to accelerate from idle or when climbing a slope.pls help.dont know what to do.

Same motor but not that easy to get the belt cover off my Fly 150ie. It takes more than some serious maneuvers to wiggle it up and over the oil filler and under the rear foot peg bracket. It actually can't be done. You have to drop the rear wheel assembley from the rear shock to get clearance. Might help some of you out there.

Vespa Motorsport, I have a 2014 Vespa with only 100 miles on it. It sits most of the time. Recently when I took it out for a spin, i noticed a loud "crackling/grinding noise" when I apply the brakes, front or rear... even with a light tap of the brakes, it the noise emanates from the left side towards the rear. Any ideas? Thanks

Please tell me tappet clearance gap of vespa lx 125....

Hi, great video. Could you give me please an advice? I have a Gilera Nexus with piagio 250ie engine. The scoot ha abot 5.500 miles, and lately I hear a squeak when I accelerate when starting from stoplight. If I accelerate slowlym then there is no noise, but if I accelerate a bit harder, it fieels like when clutch engacge, I heare this squeak noise. Have you ever enocuntered this type of problem? Thanks in advance for your advice.

HI Robot, I have a 2007 GT200. I've removed the clutch nut and the cover, clutch won't come off. The bell and whole unit is stuck on. Can you give me some direction please?

1xura should now take two steps to the front of the class.I like these video's. When a person takes his scoot in for service, how does he know if anything is actually being done to it out in the back shop?They could say they replaced those variator roller thingy's, but how in the name of God would I ever know unless I took it apart and measured each one. What is going to happen first to my GTV if I just keep running the sheet out of it and only change the oil, filter, check fluid levels,& tires?

Hi, I have a problem with my scooter. It's a Piaggio Beverly 300 Tourer 2009. I just replaced myself the driving belt and the rollers on the variator, closed everything and then tested on the center stand. On idle rpm the rear wheel has an unusual spinning. I haven't actually done any distances in order for the new parts to settle, but this spinning concerns me a lot. The clutch bell nut and axis is moving like the clutch is engaged at idle rpm and so is the wheel. What could be the problem? Have I tighten it more that required? Or belt is not installed correctly?

that is the same motor of the 2006 Derbi boulevard 150?

Wow wat a video 👌😉

Is the CVT belt orientation while installing important?I think i forgot to check while putting it.

Do you have to replace any washers or nuts on the 50s as well? Servicing the belt on my ‘07 LX50 4T 2 valve

V.M, do you know wot it means if the wear area inside the clutch bell is not consistent but dull in some areas and shinny in other areas?

👌

the same with derby sonar 125 and liberty 125

I guess this is pretty similar for my Vespa LX50?

hello what is the tightness of the variator in nm? sorry translation i am brazil!

At 12:38 you refer to a potential shim-stock washer outside the outer pulley in "older" transmissions, not present on this one. From 12:56 on you don't mention the washer that came off stuck to the outer pulley, next to the belt - it's impossible to distinguish it from the center of the pulley. At 19:31 for the reassembly you do mention and show that washer. My '09 has the pretty thick spacer and a pretty thin washer - I don't know if the washer is made of shim stock, but if that's the only washer that isn't the spacer, presumably it is supposed to go next to the belt? I think I assumed my '09 was an "older" transmission, and put that washer on the wrong side of the outer pulley two years ago. That might be why the outer pulley teeth sheared off on the splines, although it took 2200 miles.

does anyone know the belt length? Im getting 789, 812, 835...... frustrating when your not positive. I had to take off the 789 because it was restricting the variation

nice vdo but I suggest you should cover the oil filling hole while working since you never know what foreign items could find its way into the engine!!!!

Hello. I’m trying to clean the bendix of a 2007 LXV 150 with 650 miles but I cannot get the outer half of the pulley to come off as shown at 12:54. It’s as if it’s bonded to the inner half. Have you ever come across this issue? If so, what should I do to get it to come loose? Thanks for any help!

Hello, în the ET4 150, the engine is the same?

why the variator nut has to be renewed but the clutch nut does not ?

Hi all, I am from Maldives and we dont have a vespa showroom or a service center here in this country. Its been 8 months since I have imported a brand new vespa lx125. i have been visiting a mechanic monthly and changing bith engine and gear oil no other service than that. today a drum beat like noise started coming from sonewhere near the engine and airbox. not sure where its coming from. i thought it was something stuck in the wheel but i found nothing. then i went to a mechanic and he told me its the bearings of the rear wheel. another said its the because of the rear suspension. can someone pls help me out with this because there are no special vespa mehanics here and the people here doesnt know anything :(

tracker for open minor pully, whats name ?

repair my old piaggio instead of cleaning an unused one :( all those tools i dont have!

Great video but absolutely stumped as to why my 2010 cover wont come off..!??

What yes is this Vespa? I have an LX 150 IE with the kick starter. This pretty close?

I can't believe you're working on the bike with the dipstick out. Anything could fall in!

Look at ol robot

Variator nut Torque : 60 ft'lbs. ______ Clutch nut Torque 50 ft.lbs. in case you forgot, like I did...lol.

but what i mean, if people have scootter i think he can do this. I mean im 16 and i can change variator, change exhaust, cylinder etc.

Hiyaaaa! Have you tried - The Jambella Elimination (search on google)? Ive heard some great things about it and my m8 lose excellent weight with it.

Don't use metal tools to pry parts apart, they make plastic pry tools, or put some electrical tape on a flat blade screwdriver so you don't scratch Parts on the scooter.

สำหรับเมืองไทยอะไหล่แพงมากเอาแหกตาขายอะไหล่ใช้งานไม่ทนเท่าพวกระบบรถมีเกียร์

If you are like me, that to-do list must be overwhelming...

there`s really people who need video to do this ?

FOR SHAME YOU DONT GREASE THE INSIDE OF THE BOSS PIN! ! ive had mine stick and was told my the suzuki scooter IMPORTER garage to ALWAYS use some great on the inner hole of the boss pin and shame on you that you dont know that 7500mi is 12000km. I use metric scale and still know the miles for the maintenance on my scooter.

most ridiculously engineered bike to work on...

Hi Jeff. I've owned a few Piaggio scooters with the LEADER engine over the past 5 or so years, and every single one has dragged the centrifugal clutch at idle. The Japanese scooters (Honda, Yamaha) I've had didn't do this. Is this a common problem with LEADER engine Piaggio's, what can I do to stop this from happening? Would you recommend any of the aftermarket clutches/clutch bells? I am considering the Malossi Delta clutch (Malossi 5211821) for my Gilera DNA 180 is it any good?