first time out with my new (to me) Ben Orford parang, fire, chopping and splitting. www.buymeacoffee.com/robevs73i / @robevanswoodsman
Пікірлер: 63
@timbryan97016 ай бұрын
Thanks for taking me along Rob. :)
@Countryboy071Ай бұрын
Ive a Malaysian parang, cost £50. Perfectly good for the job. Parangs are one of those tools used and abused. In the far east they would laugh at some of the prices charged for such a basic tool.
@kentgreenough759 ай бұрын
Another dandy! Thanks Rob.
@gerardvanengelen90019 ай бұрын
Thanks for the review. I have one straight from Ben. Already for a number of years. Great tool. Never failed me. I got the kydex sheat though.
@RobEvansWoodsman9 ай бұрын
I want a stainless one now.
@RobertsBulgaria9 ай бұрын
I almost bought the Condor Mini DUKU recently, but due to a lack of finances, I held off so after hearing you say that it's a load of doo-doo then, might be I had a lucky let off, BUT I use the Gerber Bear Grylls Mini Parang and it does what I need it to do. Using the Tang of the Gerber, I get tons of sparks on the Donkey Richard Firesteel. I learned a lot about Malaysian Parangs watching a channel called Junglecrafty - it seems they go for a rattail tang as it is something to do with reducing the vibrations through the steel into the handle. I guess that if you're bushwacking jungle and bamboo all day then, it is going to take its toll as any other instrument will eventually.
@gingebrien24089 ай бұрын
Great review. Love Parangs. I’ve got one from Condor tools. Can’t argue against the sentiment on Kukris. 😀
@martinoutdoors69419 ай бұрын
I do like a parang and have much admired the iban parang from Ben however I did also very much like the nessmuk X-L from Dorset woodland blades.
@allanshillinglaw30839 ай бұрын
Hi Rob, Hope you’re well. I have the AEB-L version with the kydex sheath, and about the first three inches of the spine from the handle is mega sharp for striking a ferro rod. It is 3.5 mm thick and holds an edge like no other and has a nice convex grind, with about the first two inches of the grind from the scales being true scandi. Hope you continue to enjoy yours. All the best, Allan
@RobEvansWoodsman9 ай бұрын
I've been InTouch with Ben Today and I'm going up to get one in AEB-L end of next month.
@allanshillinglaw30839 ай бұрын
@@RobEvansWoodsman you won't regret it mate. Expensive, but money well spent. I also have a woodlander and a nomad, also in AEB-L, and they hold a fantastic edge. Ben's cryo/heat treat is definitely on point. I have only ever had to strop them to touch up the edge, never had to use the whetstone yet. Hope it serves you well. ATB, Allan
@Mike-kr9ys9 ай бұрын
Thanks for the good review. It is good because you have the knowledge, skills, and ability to test the (any knife/blade/tool) knife with real world usage. Anyone can make a KZfaq video, but it takes skill to test a knife in a relevant way. Re: Condor parang - shame about that. To me, it seems that Condor can make a design that LOOKS like it would work well, but falls short in the DOING of the work. Re: I think I remember, hazy memory from back in the day, that the UK military issued, or had available a parang for use for some units, maybe in certain environments. If that is so, I, for one, would love to see you review one. Thanks for another great video!
@RobEvansWoodsman9 ай бұрын
The Golok tree beater as they called it or something else?
@Mike-kr9ys9 ай бұрын
@@RobEvansWoodsman Now that you say that, I believe it was called a golock. It was way back in the mists of time, and my memory fades...or golok...anyway, I was curious if the golok was more like the Condor version, or more like the one you tested here. Maybe somewhere in between?
@RobEvansWoodsman9 ай бұрын
@@Mike-kr9ys it wasn't like either of them, I think they were originally made by Martindale (🐊 emblem) Google it, they were a straight short thick machete.
@Serge----9 ай бұрын
Great video, Rob - as always. A parang isn't really mine but was super cool to watch your video. Maybe at one day I'll rethink my view and try out one as well.
@markstead15599 ай бұрын
Brilliant unbiased review of a fellow blade crafters work. We so value all these vids you do. Good luck finding your ‘Original’ self made Parang…. That would make a great video. Keep on turning out the great content.
@RobEvansWoodsman9 ай бұрын
Thanks Mark
@TheDavewatts9 ай бұрын
Looks to be the perfect size for a good parang, very impressive, I do love a parang perfect tool for survival, in the right hands you can pretty much do it all.
@TheDavewatts9 ай бұрын
Superb knife control Rob 👍🏻😁👍🏻
@clivedunning43179 ай бұрын
Another great feathersticking video Rob.
@grahamwinter55369 ай бұрын
👍Nice one Rob. Not a big fan of Parangs myself, but it did a great job here 👌😊
@MarkYoungBushcraft9 ай бұрын
I have not seen that type of fire lighting before. I think it may work well for use here in winter when wood is covered in ice. I would combine it with a base of dry sticks. I often wondered how well the parang would work in our environment. I like how the handle angle/offset allows for chopping and splitting. Thanks for sharing Rob
@RobEvansWoodsman9 ай бұрын
I suppose that this firelay is similar to a signal fire build, I think this quality tool could be successfully used it just about any environment even the frozen north, you could easily cut and shape blocks of snow for shelter building, skining and butchering would probably be quite easy on large game , you could hold the forward portion of the blade to do delicate skinning tasks. Lofty Wiseman's favourite tool!
@RobEvansWoodsman9 ай бұрын
Dry sticks are a luxury in my local Woods, I'll be there again tomorrow I'll have to think of another firelay.
@grahamblackall63059 ай бұрын
Here's hoping that you get your parang back!
@RobEvansWoodsman9 ай бұрын
Unlikely.
@1-0-89 ай бұрын
Another enjoyable video. Thanks from sunny Bristol
@RobEvansWoodsman9 ай бұрын
Greetings from sunny Llanelli Carmarthenshire!!!
@spider50013 ай бұрын
Really cool Mr Evans. I never been able to try a parang yet. I like to use kukris. I noticed a portion of unsharpened up near the handle. I know people in my area have been sharpening that to their preferred scandi for feathers. Kind of a rip off of the skrama. Do you think you would be able to put your scandi up there without weakening the blade? It would be cool to see a mod. Great video again!🙂
@RobEvansWoodsman3 ай бұрын
I'm not touching the grind on this knife, it's an awesome tool and I have dozens of scandi knives I can use..
@gareththompson56539 ай бұрын
Great review, really nice looking parang.
@schonbeardwildmark9 ай бұрын
That’s a beautiful knife mate! Nice to see it in action!
@RobEvansWoodsman9 ай бұрын
I like it so much I'm thinking of buying one in stainless!
@turtlewolfpack60619 ай бұрын
Can't fault the parang except that it isn't a khukuri!
@RobEvansWoodsman9 ай бұрын
I'm a big fan of the Cold steel kukri.
@turtlewolfpack60619 ай бұрын
@@RobEvansWoodsman those I haven't ever had or used but haven't really heard anything really bad about them except current prices!
@johnturner62519 ай бұрын
THANKX ROB
@stonemonkey19683 ай бұрын
Rob was it the full size parang or the pocket parang? I think the pocket parang from Ben has a 7" blade. Great video as always
@RobEvansWoodsman3 ай бұрын
Full size Eban parang , I love it, getting a new one in Aeb-l soon.
@martyb37839 ай бұрын
Great video and review.
@RobEvansWoodsman9 ай бұрын
👍 thanks
@The-Armed-Pacifist9 ай бұрын
I think you could make a feather stick with an old lawnmower blade and a broom handle. Nice work!
@ericlevine4209 ай бұрын
Lmao Or a broken bottle
@RobEvansWoodsman9 ай бұрын
Give anything a go mate, the problem lies in making multiple feather sticks, you really need the right handle /grip.
@The-Armed-Pacifist9 ай бұрын
@@RobEvansWoodsman Which of your own designs do you prefer?
@RobEvansWoodsman9 ай бұрын
@The-Armed-Pacifist I'm struggling to answer that one , I think I prefer the MK2 to the MK1 but I have a new version of the bushtool coming soon which might just be my perfect knife, I prefer both my designs than my existing bushtool.
@The-Armed-Pacifist9 ай бұрын
I have never made a knife from scratch. I have installed scales from our own wood grown onsite. Most of the knives were Damascus forged by Billy Meeks in BelAir, Maryland, USA. Unfortunately, Billy has suffered at least two strokes and is pretty much retired. Of the knives he made and completed, my favorite is a Damascus copy of a large knife which Bowie SUPPOSEDLY gifted to a friend of his. It is beautiful, but not practical. I would love to purchase one of yours someday. I’m running out of time. I will be 75 on the 18th.
@ericlevine4209 ай бұрын
Ok Robert That knife is very cool because it has style and functional Work of art really. I would hate to carve a netting needle with it, but that's not what it's for. 🍻
@RobEvansWoodsman9 ай бұрын
I'd give it a go!
@JJ-ef7lb9 ай бұрын
Ben Orford only makes quality knives and tools. Hefty price but you get what you pay for sometimes.
@skovbo659 ай бұрын
You shoud try the part between the handle and the edge it migth be suitable for a ferro rod.
@RobEvansWoodsman9 ай бұрын
It's been rounded for comfort when choking up.
@Mugwumps1079 ай бұрын
Great filum again Burt 👍🏻 That Parang is a Beaut, I handled one at Bens store at the Shraftin show, very nice indeed as are all his stuff. Great, fair and unbiased review as always. I hope you find your own Parang and it comes back to you. You didn’t enjoy the Condor Duku then by the sounds of it. Mind you it’s not very expensive to be fair and mass produced I spose. Burt Evans could stickerfeather with a rusty teaspoon I reckon 😁 Now to more important matters of Tea, Yarkshuh tea is indeed the best from what all my mates tell me too. I prefer a nice coffee 😮😀🇬🇧
@RobEvansWoodsman9 ай бұрын
I like both Dave
@THENEWWRANGLER6 ай бұрын
Can you explain more the lack of love for the condor duku parang please.
@RobEvansWoodsman6 ай бұрын
I do explain in another video but I can't remember which one it is, to keep it short I found three failings, steel is soft, not enough weight up front and the awful round slippery handle which rotates in the hand when in use. The sheath was also far too tight and sat too high on the belt.
@THENEWWRANGLER6 ай бұрын
@@RobEvansWoodsman I see I altered the sheath on mine for a lefty, and used a drop down belt loop so it rides lower than the stock sheath loop, also I used camo duct tape to wrap my handle for added grip and perhaps to stop the rolling in the hand. also added a lanyard so it locks to my hand, I can't comment on the soft steel, I don't think I could tell the difference
@RobEvansWoodsman6 ай бұрын
@@THENEWWRANGLER I flattened the handle and made another sheath which was an improvement but I really don't like the tool.