No video
2012 GSXR 1000 Wrecked Bike Rebuild (PT. 5 Reassembly)
Рет қаралды 49,327
Күн бұрынI Had a guy message me and told me he had a wrecked GSXR-1000, he wanted to get rid of it to make the wife happy so I went to check it out and we made a deal and it was significantly cheaper than a bike from COPART but the bike was badly wrecked.
In this video I stripped the frame down so i could send it off for powdercoat.
AMAZON Affiliate Link
www.amazon.com...
instagram- / benjamminoutdoors
Facebook - www.facebook.c...
Patreon- www.patreon.co...
@mikeopenshaw9128 2 жыл бұрын
Oh my gosh - you never fail to impress me with your innovative approach to problems - I've seen plenty of people weld nuts to broken studs - but that "washer and socket" approach - a first for me - and I've been tinkering with bikes for forty odd years! Great stuff Benjammin - best of luck with the move - rest assured we'll all be here waiting for you once you're done! 👍🤩
@Benjamminoutdoors 2 жыл бұрын
the socket wasn't the best option really lol but it worked and i have a TON of extra sockets so it wasn't a big deal to ruin one but thanks!
@ayabongamaseko9313 3 ай бұрын
keen on starting my first rebuild. found a 2000 R6 (technically not a rebuild because electronics and mechanics are working but I want to modernise the bike and replace everything that needs to be replaced) so I'm watching learning the different parts and what to tackle first along the journey. Thank you for being so detailed in your explanations! All the way from South Africa
@Redline_ratchets 2 жыл бұрын
Hey man I dig the build glad I finally found someone that doesn't half ass s*** on KZfaq. Great work keep it up
@Benjamminoutdoors 2 жыл бұрын
Thanks!
@RomanLothar1986 2 жыл бұрын
Best of luck with the new house. Look forward to seeing more builds and the new place!
@babayega_ 2 жыл бұрын
Congrats on the new house. You should definitely film the move of your shop stuff and how you set up the shop in the new place. Would love to see it during the set up process and focal walk through of where you put everything and how you organized it all. 🙏
@Benjamminoutdoors 2 жыл бұрын
For sure! We have a ton of work to do on the house per our contract but after I’ll definitely get my shop set up nice and film it.
@gumbehgriffiths7866 2 жыл бұрын
man whatever condition of a bike there is i just have so much faith in you that you can bring it back to life. your super talented man, you can do it.
@GarrethCollins 2 жыл бұрын
Nice! buying a house best decision you can make ! I haven't been able to make any videos because of buying a house you will probably understand once you do. but I will be back soon. Not going to lie welding the header bolts made me scratch my head 🤣 but nice job!
@Benjamminoutdoors 2 жыл бұрын
I know! We actually have to repair a lot within the first 30 days per the contract so I’m ganna be pretty busy… And yeah lol I don’t like the idea of drilling and retapping so the welding broken bolts is my first go to.
@GarrethCollins 2 жыл бұрын
@@Benjamminoutdoors Lmao have the same issue we are in raining season and found out the roof is leaking on several spots so need to repair that and Africa is so damn hot i needed to install a aircon and so on and so on alot to do but atleast my own Zone to do as i please sets the mind.
@nurampboss5129 Жыл бұрын
Need help with parts for my bike use parts its a yama 750 am from Jamaica Am a big fan
@nickq204 2 жыл бұрын
Powder coat looks great! Too bad the build gets held up by shipping, but that’s part of the rebuild game. Good luck with the new house!
@imthekingoftheroad2646 2 жыл бұрын
This bike looks like new now Your work is great We are waiting for you another video to install the rest of the bike parts. good luck brother👍👍👍
@testplmnb 2 жыл бұрын
dude is slammin that hammer
@SusakuOgi Жыл бұрын
impressive cleaning work O.O
@9436515765 2 жыл бұрын
Good to see almost Every sucker on its place☺️☺️
@thereelguy70 2 жыл бұрын
I'm a fan finish,keep the good work. Hurry to see your next videos. Take care of you Richard( Quebec) Canada
@sheriffarouk1594 2 ай бұрын
Benjammin is the best one
@LuizEduardozsf 2 жыл бұрын
best KZfaq content 🤟
@barrbr8610 2 жыл бұрын
I hope it's complete build this Christmas 😁👍keep up the good work
@johnpartridge7623 2 жыл бұрын
Well done on getting those broken bolts out 👍
@chrisbriss12 2 жыл бұрын
Hey man , how are you , we love your videos , we want some more videos of motorcycles. Great job 👏
@howdoesitpossible7638 2 жыл бұрын
why you've been so long bro we were waiting for you #Lot's_of_love_from_Pakistan
@bikermag9048 2 жыл бұрын
Amazing work !
@momoansari1195 2 жыл бұрын
I always enjoy your work , I'm looking forward to c it done ,best wishes
@gumbehgriffiths7866 2 жыл бұрын
all the best with your house, hope everything works out well for you
@pieceonerainbow1487 2 жыл бұрын
Mr. Benjammin Your skills are amazing. I always watch your youtube chanel. very inspiring for motorcycle lovers. do you also sell machines that you repair ?
@carcass83 2 жыл бұрын
Peace be upon you bro, I'm carcass from Malaysia😁👋please review engine restoration (model F4 RR 2012)
@jings_plus_us4407 2 жыл бұрын
Nice detailing 👍👍👍
@Fabriciuskai 2 жыл бұрын
Yes finally
@bradleymcdonald8694 2 жыл бұрын
You deserve alot more subs
@rawrchicken008 2 жыл бұрын
Dope shit on taking out the header bolts man!
@suchy1982 2 жыл бұрын
Yeaa Good Job bro
@NalinKhurb 2 жыл бұрын
Great video man 24:33 you sure about the rotation? The tread seems opposite, I could be wrong here though
@PCDoctorUSA 2 жыл бұрын
Front tire looked wrong.
@Benjamminoutdoors 2 жыл бұрын
Believe it or not but the rotation on the tire is going the correct direction.
@NalinKhurb 2 жыл бұрын
@@Benjamminoutdoors Cool cool
@quangduyshare3139 2 жыл бұрын
Good jod
@creativebj2186 2 жыл бұрын
Nice
@Duck_727 4 ай бұрын
What happen to part 7
@markturbocustoms4533 2 жыл бұрын
Bro I was changed my Duke 390 piston kit last week from KTM showroom and now my bike runned 321 kilometres after work but my problem is my bike shows little bit smoke on high reves plz tell me whats the reson behind this..
@PANTYEATR1 Жыл бұрын
South Lakeland Florida? Daps from Clermont FL 💪
@Benjamminoutdoors Жыл бұрын
Yup! Nice!
@nevermind_sabix 2 жыл бұрын
❤️❤️❤️❤️
@jraqo 4 ай бұрын
2 years later and this was the cliff hanger:( WHAT HAPPENED TO THE GIXXXXXXY
@jraqo 4 ай бұрын
cancel that i found it
@alissonmelo1709 2 жыл бұрын
Are you in Utah? And I wish the best in your new home.
@Benjamminoutdoors 2 жыл бұрын
No I’m in Florida, but thanks!
@brryyy 2 жыл бұрын
Can you give us the link for the bearing puller and the bearing drivers
@Benjamminoutdoors 2 жыл бұрын
Look in the description, I have my Amazon affiliate link. Go there and look under mechanics tools and you’ll find them!
@jayboog4434 2 жыл бұрын
What kind of ZEP cleaner was that it worked really good
@Benjamminoutdoors 2 жыл бұрын
Just some degreaser
@godfreylockwood8033 2 жыл бұрын
Was the 2012 gsxr1000 build finish?
@Benjamminoutdoors 2 жыл бұрын
No I have not finished it yet, I’ve been very very busy with a new home purchase (and the repairs that go with it)
@godfreylockwood8033 2 жыл бұрын
Ok I understand good luck with the new home , be waiting for that build finish video
@nurampboss5129 Жыл бұрын
Need help with parts for my bike use parts its a yama 750 am from Jamaica Am a big fan
@Benjamminoutdoors Жыл бұрын
I don’t have any, I’m sorry.
@jayonbikes4271 2 жыл бұрын
🤟
@user-qq7ie2ri4z 2 жыл бұрын
Can you help me with job opportunities
@vezquli1 2 жыл бұрын
19:57 the needle bearing must not be hit
@Benjamminoutdoors 2 жыл бұрын
yeah I know you shouldn’t, you should use a hydraulic press but I don’t have one so I make do with what I got.
@viv6189 2 жыл бұрын
Long live your wish
@Stevenstevio 2 жыл бұрын
imagine calling the gixxer thau...gee es ex ar one thousand
@ronniecurnutt4309 2 жыл бұрын
S w e e t .............
@b.7265 2 жыл бұрын
You work a little bit like a mess 😅
@Benjamminoutdoors 2 жыл бұрын
Yeah I know, Trying to get more organized!
@StrawDragon 2 жыл бұрын
Amateur mechanic showing you things not to do..
@Benjamminoutdoors 2 жыл бұрын
you're right, I'm not a pro this is all for fun and I'm constantly learning. but I'm curious what was SOO wrong that I did exactly? Because the only thing that I see that I did that professional mechanics wouldn’t do was use the impact driver and using a dead blow hammer for the bearings. I don’t have a hydraulic press right now so I can’t really help that and the impact driver yeah I know it’s not professional but it’s not like I hammered the bolts home, most things I snuggle them up and then come back with a ratchet. if you’re not an idiot then you won’t strip things out. I’ve never stripped a bolt with the impact driver. I also don’t have a small torque wrench so I can’t torque the small stuff, A professional shop can afford everything immediately, but it’s taking me about five years to accumulate what I have and I still am missing a ton of tools, I’m not rich I can’t just buy every tool a shop has right away at least, it’s a process.
@unavailabill 2 жыл бұрын
You prob can’t even change your own oil without using a video someone like Ben made, I bet money on it. This guy has more mechanical skill in his left pinky than you ever had in your whole life. I wish you could watch a “professional” mechanic work on your vehicles, it would blow your mind, you are so sheltered.
Taylor Haug
Рет қаралды 173 М.