200hp GSXR1000 Drag Bike Build Timelapse

Рет қаралды 36,413

domscustoms

3 жыл бұрын

Timelapse of my mild drag bike build.

Пікірлер: 117

@johnjones9738 3 жыл бұрын

Whats up... This is Ghost down here in Jax.. Outstanding VD. I do a lot of the same builds down here at Wrenchmen cycle shop.. Its good to see a racer Rider do builds.. Once I build a bike then I can show them what there bikes are capable of... I will be following you to give that support...

@dirtyboysadventures9878 3 жыл бұрын

You better help the midget with the blue busa get his bike right. All in good fun

@Domscustoms 3 жыл бұрын

Thanks for the support!

@johnjones9738 3 жыл бұрын

@@dirtyboysadventures9878 I went out last night and raced him... We ran three races and I beat him 2 out of three races... I was on my new 2018 stock wheel base GSxr1000... He has some thing to sort out...

@jonyq04 3 жыл бұрын

I stumble into this channel. Let me tell you, I can see you got the passion an the knowledge it takes to make it here in KZfaq. Love the build a lot, enjoyed the video. Keep it up. This videos are really really immersive and full of content, maybe making it into shorter and more specific, like if it was a tv series instead of a movie will help you have more videos in the end... that’s the way my friend, you got this.

@spooningwithyourmoma1769 3 жыл бұрын

Well put.

@nathanmadison484 Жыл бұрын

Hey brother awesome video what's the music 🎶 you're playing called love it

@jasonkeating9958 3 жыл бұрын

Awesome I love long build vids with lots of detail 👍👌

@kngyada 3 жыл бұрын

Great video bro.. Quality and clarity was great.. And i love how it was built on jack stands. 👍👍👍

@mickaelbrown6570 3 жыл бұрын

All I see is love and passion Beautiful build

@TBagr 3 жыл бұрын

I’m new to your channel. Great work. It appears that you’re the epitome of the American dream. I wish you and your ship much success. Keep up the good work and content.

@unkindzx10r 3 жыл бұрын

Very very impressive 👏🏽👏🏽👏🏽and to say I was about to skip this video,lot of talent there, you have a new sub here👍🏽

@brentridings 3 жыл бұрын

killin it man! great video. Like that S13 you had sittin back in the garage too!!

@kevmc209 3 жыл бұрын

Damn my guy!! Thats a beautiful gixxer!! Glad to be able to watch this build... Great vid my guy... Hell yea i subbed!!!!

@dougsmith6220 3 жыл бұрын

This brotha is a true professional, i will be sub.to your channel and for sure telling my other bike bros about you.

@Domscustoms 3 жыл бұрын

Thanks!!

@blessedvetoutdoors 3 жыл бұрын

Solid build bro and great content all around sir. I've been showering yt for videos specifically like this! Please keep em coming bro, I am shocked you're not killing the YT game man. Sub'd up and about to watch the previous ones now.

@Domscustoms 3 жыл бұрын

Awesome thanks!

@taters7359 3 жыл бұрын

Mane you killed it put alot of work in much respect 💪🏽🇺🇲

@Domscustoms 3 жыл бұрын

Thanks!!

@brettpillar8259 3 жыл бұрын

Such a great video and a sick bike, well done man!

@1Serious392 3 жыл бұрын

Wow where have you been lol nice vid and craftsmanship from start to finish.

@ericnarvaiz9216 3 жыл бұрын

I said same thing lmao bad dude right there

@millz1012 3 жыл бұрын

Very good video love the build

@Davidant21 3 жыл бұрын

Great video on build can’t wait to see better videos of bike running

@Domscustoms 3 жыл бұрын

I'll get a track day with it on the 23rd I'll post shortly after

@a.johnson9400 3 жыл бұрын

What up playa....this willacoochee giving u a holla.keep up that good work.....u seem devoted an happy wit it.....very proud cuz!

@Domscustoms 3 жыл бұрын

Thanks!

@apousidisvasileios9571 3 жыл бұрын

Perfect job Bravo !!!!!!

@dirtyboysadventures9878 3 жыл бұрын

One stop shop.. nice stuff

@mozekesladevlogs1524 3 жыл бұрын

Keep those videos coming bro 💪🏽

@johnnydept4082 3 жыл бұрын

Great video and passion

@pitbikecookracing3324 3 жыл бұрын

That was awesome. I watched the whole video. More then once

@benniepretorius4352 2 жыл бұрын

Awesomeness brother . Keep up the good work

@harryvalentin8462 3 жыл бұрын

Awesome👏nice job💥

@ericnarvaiz9216 3 жыл бұрын

Stay strong you’ll have 4mil subs. Eventually

@user-wx6fs7ls5b 2 жыл бұрын

Incredible video

@seabcopeland2228 3 жыл бұрын

Your a talented brother great wk

@antblakk 3 жыл бұрын

Joint sharp 💪🏾💪🏾

@mathiewcharron973 2 жыл бұрын

cool job bro

@danielmeade1573 3 жыл бұрын

nice work bro💪🏾

@Domscustoms 3 жыл бұрын

Thanks!

@keithswinson9515 3 жыл бұрын

I love it

@mrsmel269 3 жыл бұрын

sweet set up !!!! had a 1073 01 when she ran she rocked when i blew her up she was pissed .#livetoride

@bobdatreekillerneace3092 3 жыл бұрын

Yeah can def get better my 06 stock 1000 on mr12 ran 8.99 and a 1.40 60ft. Makes me happy what my bike running

@shadetreeracer3715 3 жыл бұрын

Bad ass bike sir very nice

@sedrickrobinson7273 3 жыл бұрын

Nice bro 😎

@MatiMorini 2 жыл бұрын

WOW nice!!!!!!

@mr.gixxer805 3 жыл бұрын

Damn she is beautiful! I can’t wait for mine to be that beautiful

@hondaguy425able 3 жыл бұрын

Amazing build my man if you dont mind me asking how did you learn to do engines like that?

@Domscustoms 3 жыл бұрын

My dad built engines, he taught me when I was younger

@jaybavis5896 11 ай бұрын

That’s freaking amazing nice bro . How can I hit you up for help with my 2020 busa

@acesmith9424 3 жыл бұрын

Being you did the work yourself, How much was this engine build in parts? Including the clutch mod and 1st gear swap

@hunterxl8025 Жыл бұрын

I'm planning to get 22 gsxr 1000r and put 1073 kit .6800$ installed guarantee 220hp+++ .

@calikid7116 2 жыл бұрын

So just a question did you rotate and balance the crankshaft with all this work that you did that's like highly important or the motor is going to f****** blow up like a bomb

@samuelsmith5737 3 жыл бұрын

Awesome build, how much you charge on p/p head jobs?

@Domscustoms 3 жыл бұрын

It 500 if I have the head

@stevenrandolph5482 3 жыл бұрын

Goggles when grinding

@thesuperstuff 3 жыл бұрын

Front half looks good but its seems like its falling off in the back half. Sounds like its slightly blowing through the clutch. My bone stock motor bike was trapping 142mph in a similar setup chassis.

@Domscustoms 3 жыл бұрын

I have it geared for 1/8 15/46, I will soon post with 1/4 gearing does alot better

@lalexaguilarr4265 Жыл бұрын

are the bearings original suzuki? And at what torque did you put the wheels and at what torque did you excuse the bench?

@krisiits5 3 жыл бұрын

When porting head, better leave them walls between 2 channels rounded, not knife edged - makes flow worse (both intake and exhaust). Why did You go with used piston rings on new forged pistons? Nice quality paint job!

@dillonconiglio8526 3 жыл бұрын

can you run the rsr airshifter on a stock trans or does it work better with back cut gears?

@Domscustoms 3 жыл бұрын

The cut gears all always better but the shift works great with stock trans

@robertcarr1571 3 жыл бұрын

How comfortable are you working on and setting up turbo motors have you ever worked with them

@Domscustoms 3 жыл бұрын

Yeah I have a turbo bike now. I'm good with turbo stuff I just don't tune them. Have a guy though

@robertcarr1571 3 жыл бұрын

@@Domscustoms ok is he located in ga

@Domscustoms 3 жыл бұрын

Yes warner Robin's georgia.

@robertcarr1571 3 жыл бұрын

@@Domscustoms Hope you all out Voting and repin today send me your info and we will be in touch do you ever come up to MIR (budds creek) and race are what track do you all race at if you can send me shop phone # if you have one if not I send my # don't do alot of typing

@stevengrissom7142 3 жыл бұрын

Nice build bro did you keep the stock cams?

@Domscustoms 3 жыл бұрын

Yes but they are twin intake cams

@stevengrissom7142 3 жыл бұрын

@@Domscustoms ty

@walterterrel 3 жыл бұрын

Is there a possible way you can keep uploading the bike footage and also what was the cost for parts? Currently building a 07 1k

@Domscustoms 3 жыл бұрын

Absolutely! And I have $400 in the crank, $500 in the pistons. Done my own head but cost about $500 to do. $400 for tranny bearings, $200 for 1st gear, the about $500 in misc. Gaskets, engine bearings, etc

@walterterrel 3 жыл бұрын

@@Domscustoms do you have contact information ide like to speak to you over the phone I really benefit as a mechanic and jockey from your footage. I feel like you could lead me in the right direction.

@Domscustoms 3 жыл бұрын

Yes you can google Doms Customs out of warner Robin's ga and my contact number will be there

@walterterrel 3 жыл бұрын

@@Domscustoms Preciate it bro will be speaking to you soon

@waltbennefield 3 жыл бұрын

Great video how can I get some work done on my 06 1000 engine ??

@Domscustoms 3 жыл бұрын

My shop is Doms Customs in Warner Robin's ga. You can Google me and get In contact

@waltbennefield 3 жыл бұрын

Will do thanks

@mahmoudelwan255 3 жыл бұрын

nice work bro . what fuel are u tuning with ?

@Domscustoms 3 жыл бұрын

Mrx02

@mahmoudelwan255 3 жыл бұрын

@@Domscustoms can it run on pump

@Domscustoms 3 жыл бұрын

Yes, will need map switch I would run the race gas when racing though

@beninqdyet 7 ай бұрын

Did someone teach you how to rebuild motors?

@jerryjones297 3 жыл бұрын

I have a question. I did simillar mods on my 07 gsxr 1k. I did keep my stock pistons, port head and thin head gasket along with web cams. My bike runs hot 195-210 when before it ran into 176-186 degrees. What can you tell me about chages to make it run cooler

@Domscustoms 3 жыл бұрын

Make sure to burp the system well and use engine ice coolant. An ecu flash to turn the fans on sooner helps to. 195 to 210 isnt running hot though

@jerryjones297 3 жыл бұрын

@@Domscustoms ecu is flashed and fans are set to turn on sooner. I also have burped the system the only thing i have not done was to use engine ice coolant.

@jerryjones297 3 жыл бұрын

@@Domscustoms could not hot lap the bike. It would overflow coolant

@Domscustoms 3 жыл бұрын

@@jerryjones297 engine ice helps for sure. Make sure you have a good radiator cap. It shouldn't start overflowing until the temps are up in the high 220s I believe. I've let my bike run when it had stock engine in the heat it got to 220 and never over flowed. That all I can think of

@greensparks415 3 жыл бұрын

HAY DO YOU HAVE A VIDEO THAT ISN'T TIME LAPSED BECAUSE I HAVE BEEN TO AUTO MECHANIC SCHOOL BUT I HAVEN'T FOR MOTORCYCLES WITH THAT EXPIERENCE DO YOU THINK IT CAN BE DONE WITH MY SKILLS AND I HAVE BEEN WORKING ON CARS FOR MOST OF MY LIFE JUST NOT FOR A JOB I THINK I CAN DO IT BUT I NEED SOME ADVICE BEFORE I START BRAKING DOWN THE MOTOR WHAT DO YOU THINK ?

@1Serious392 3 жыл бұрын

You said a dyno in columbia sc name pure power how do i contact them

@Domscustoms 3 жыл бұрын

They seem to have removed themselves online. I can't find the page anymore

@adrieanwilliams6155 3 жыл бұрын

where’d you get the grey handgrips?

@Domscustoms 3 жыл бұрын

They are renthal soft grips. You can get them on ebay. The grey ones are the softest and are the easiest to hang on to

@loganwhitlock7480 Жыл бұрын

What fuel pump upgrades did you do?

@Domscustoms Жыл бұрын

Factory pump

@eduardoflores9099 3 жыл бұрын

What size rim are you running ?

@yohearthis 3 жыл бұрын

any idea what track is playing?

@theogriffin9922 2 жыл бұрын

How can I get my heads done, I’ve got a 2017 gsxr 1000

@Domscustoms 2 жыл бұрын

Its 750 to port and polish. 4782358003 is the shop number

@Youngsoldier93 2 жыл бұрын

How much would it cost for a build like this? (Engine alone)

@Domscustoms 2 жыл бұрын

About 3500

@Youngsoldier93 2 жыл бұрын

@@Domscustoms that's not bad at all, I've been debating on letting carpenter racing build it or doing it myself for my K5 1000. I've talked to a few people in the gsxr communities and majority told me to keep it stock only because these 1000s have bearing issues on higher hp applications and to just build a busa instead 😥 but fuck it let's do it! Hahaha

@AvenueRacingChannel_210 3 жыл бұрын

I’m looking for someone to port & Polish a head for a Zx6r ?

@Domscustoms 3 жыл бұрын

I can do it if u you can get me just the head

@AvenueRacingChannel_210 3 жыл бұрын

You got Instagram or Facebook? I’m willing to get it done around income?

@AvenueRacingChannel_210 3 жыл бұрын

How much am I looking at for just that & what about fully built head ...

@tristenwood3130 3 жыл бұрын

What size swing arm?

@Domscustoms 3 жыл бұрын

12.5 over

@kenchoyce4627 11 ай бұрын

Mr. Dom I have an 2006 Suzuki GSX-R1000 like yours. You say that your swingarm is 12.5 can I get a swingarm the same as yours on your 2006 Suzuki GSX-R1000 if I don't have a race motor and used for daily riding? Or what size swingarm do you suggest that I need? Just a regular wheel base front and back. Thanks

@ericunderwing 2 жыл бұрын

why reuse the rings??? why port with the motor right there not covered and all the parts catching the dust. valves shims an every thing... i dont understand the hard work then miss easy stuff

@Domscustoms 2 жыл бұрын

There is absolutely nothing wrong with reusing piston rings if there are still good. And absolutely everything I do gets cleaned and or hot tanked before i put it together. Including the head and all parts.

@ericunderwing 2 жыл бұрын

@@Domscustoms makes more sense if your cleaning it all anyway. I've always been taught to keep it as clean as you can. An if your spending money form new pistons I would always change the rings out well your there. But then again building a drag motor it will see far less uses between rebuilds... plus I dont know how "new" the old rings are. There are just practices I would always follow. More commonly said as well I'm in here mods...