KitchenAid Refrigerator Troubleshooting and Diagnostic Codes

KitchenAid Refrigerator Troubleshooting and Diagnostic Codes - Whirlpool Refrigerator Diagnostic Too

Рет қаралды 443,787

3 жыл бұрын

Today, we're unraveling how to put a KitchenAid Refrigerator into diagnostic mode, and how to decipher some of the KitchenAid Refrigerator Error Codes, among other things. This is a newer-style interface, and you can use this same system and same codes to Troubleshoot a Whirlpool Refrigerator along with the same Whirlpool Refrigerator Error Codes and Troubleshooting. The number of tests and error codes on this system is incredibly deep, and its very useful if in case your KitchenAid refrigerator won't cool or has some other issue.
I'll be honest: This video is boring unless you need to use the system, then its awesome. I struggled to find a good video on this when I had to tech these style machines at customer houses because the last tech didn't know what he was doing, and stole the tech sheet.
You can buy appliance parts w/ a great warranty at: bit.ly/3pVxWyX
Like or Hate the Hat? Buy the Hat! bit.ly/3dtHHjE
(The hat is NOT an endorsement of any candidate, party, or ideology. I am just a big fan of parody of all kinds)
Tools I use in all videos can be found at my Amazon Idea Page: www.amazon.com/shop/bensappli...
Did this video help you out? Send me a tip, and help me make more Appliance Repair videos for people to watch for free!
PayPal: paypal.me/BensappliancesYT?lo...
CashApp: $BenjaminSchlichter
Affiliate Disclosure Form: bit.ly/3oXeu3B
** Links to external websites and parts may result in me receiving a commission on sales.

Пікірлер: 426

@333gatekeeper Ай бұрын

OMG just had a service tech come to our house two days ago and he did none of these tests. He was completely guessing at what could be wrong and basically told us we needed to buy a new refrigerator. The fridge was only making loud noises at certain times and then the water pad switch quit working and wouldn't dispense any water, even though the ice maker was working and water would flow to ice-maker but not through water pad. Water filter had been changed on time and water side still would not work, his answer was buy a new fridge or let him replace the compressor for 1600.00 when we were not having any cooling problems. Unbelievable! Thank you so much for this video!!!

@pank8800 Жыл бұрын

Great video and help, thank you. I wish these companies were documenting their stuff so we can do some troubleshooting instead of making black boxes that you can't find documentation on. Thankfully we have people like you!

@sibedoya Жыл бұрын

Few KZfaq videos are so thorough, well spoken and easy to follow. On to the tests to find out (I hope) why no ice. Thanks

@stefonperry2154 2 жыл бұрын

Thank you for this info. You've saved us a service call fee! I am not handy by any stretch of the imagination but I still try. And with your help I was successful. Salute good Sir!

@andrecourteau9703 2 жыл бұрын

Votre vidéo m’a rassuré. Votre présentation est claire et extrêmement utile. Merci beaucoup!

@Phogman1 2 жыл бұрын

Hey Ben! Thank you so much for this. Was able to determine my 7 year old KitchenAid KFIS29PBMSOO had a broken evaporator fan and the thermistor / sensors were shot, causing the coils to ice up. Had minimal cooling in main fridge but lower ice box was fine. Following your other video, I dismantled the interior (was able to do so without removing the top sections!) and thawed out the coils (what a mess!) and replaced the fan and sensors with new parts for about $100. Was motivated to try and self-repair when I saw a new fridge would run $3-4K. Hoping to get at least a few more years out of this beast as it has been a good fridge and everything (including the ice maker and water dispenser) still work. Thanks again. You’re a champ. Great videos - keep up the good work.

@kalpikpatel 2 жыл бұрын

I am having same issue for almost same kind French door model, can you please advice all good now - working as expected or what is your refrigerator status? Please share...

@elliottm9365 11 ай бұрын

I have the same fridge - KFIS29PBMS000. I ran all the tests in the video and they all passed. I have taken the refrigerator and freezer apart. This unit has two evaporators; one for the freezer and one for the fridge. Neither one is frozen over and both fans are running. The refrigerator gets to about 42 degrees and the freezer is only getting up to 22 degrees - both too low. . Coils are clean. Compressor is running. Replaced refrigerator and freezer thermistors just in case. Trying 8 hour defrost mode now. Could it be low on refrigerant? Is there anything else to check? The new refrigerators are crap and I don't want to spend $3000 every 3-5 years on a new fridge. Any suggestions would be appreciated. Thanks.

@dallasbiggz7007 Жыл бұрын

Appreciate the Great info. Pls consider adding chapter dividers for each code - would make it even more useful. 😉

@whitenas 4 ай бұрын

I have this same fridge and matching kitchenaid appliances. All within 2 years had some type of failure ranging from minor to major. 2 people in the house. Clean light use. Refrigerator, microwave, dishwasher, oven... all absolute disappointing junk. Im shocked how bad the quality of appliances has gotten. My parents bought new stuff in 1980. Those same units still in good operation today.

@titoqwentezproductionz3406 8 сағат бұрын

I am shocked as well. they want 3k + and its falling apart just after 6 months. completely outrageous

@whitenas 7 сағат бұрын

@titoqwentezproductionz3406 we shouldn't be too surprised. I'm learn wolf or sub zero appliances are no better and certainly cost more

@titoqwentezproductionz3406 7 сағат бұрын

@@whitenas yep its a real shame

@royabreu3627 3 жыл бұрын

Man iam a tech in nc,i dont know as much as you do,you know what you are doing i liked your video so much,keep on,thx

@danpickett7859 2 жыл бұрын

Hey Ben! Thanks for the video- great information! I don't recall the repair tech running through any of these tests but I'm hopeful his diagnoses of a bad compressor was correct without it.

@Doosha777 3 жыл бұрын

I can not thank you enough for this video. You just saved me $170. Thank you so much again.

@bensappliancesandjunk 3 жыл бұрын

Really? I just put this video out. I am so happy to hear it helped you!

@Doosha777 3 жыл бұрын

@@bensappliancesandjunk i know. I called Abt to come and look at my fridge and they said it was $170 fee. So your video saved me that money.

@cheryllaster1365 3 жыл бұрын

I’m a lab scientist and work on maintaining and repairing expensive lab equipment- so I figured how hard can this be for a 63 yo gal. Did my research on line, ordered the part and set aside a morning for the job. I used your U tube video to help through the process, but reading the comments 1st is helpful. One explains how you can skip a few steps, such as removing the doors and interior drawer frame, if you angle the evaporator cover by about 30 degrees to get it from behind the drawer frame. Took some force and bravery but it came out and went back in ok. Got the fan in, made sure it worked and put everything back together. It is colder than ever and isn’t icing up any more. Only 1 problem - the under shelf lighting comes on and flashes at a regular interval. I know the shelves get their power from the hangers at the back and won’t work at all if that connection is bad, but mine come on and flash, not flickering - flashing at regular interval. Maybe I altered a setting while in maintenance, but don’t know which one or why there would be a flashing light setting at about 5 second intervals for the under shelf lighting?! Anyone have an ideas? Happy with the outcome anyway, my food is staying cold.

@bensappliancesandjunk 3 жыл бұрын

Is intermittent flashing lights means that either a wire has not been securely plugged back in or your freezer LED board is starting to go bad. It's a very common occurrence but it doesn't actually relate to the fan issue it's a new problem all together

@cheryllaster1365 3 жыл бұрын

@@bensappliancesandjunk I figure I caused the problem. Are the wires for it under the water filter cover? I thought I’d check on them next.

@bensappliancesandjunk 3 жыл бұрын

@@cheryllaster1365 for the refrigerator, yes. But there's a situation with these where if the freezer light driver, in the freezer, is going bad it tends to affect the refrigerator cabinet instead. You'd want to verify incoming voltage to the refrigerator board to confirm that you are getting insufficient voltage before replacing one or the other.

@Ceobeatmaker 2 жыл бұрын

Thanks so much for this video. The type of whirlpool fridge I have did NOT come with those diagnostic codes attached to the fridge. I was steady trying to look for it as the icemaker just stopped working recently. I can now test for these errors so that I don't have to waste $75 just for a guy to "look" at it. I can tell him exactly what is wrong and pay one time instead of a few times.

@henrylee2964 Жыл бұрын

Thank you. i found the instructions under that right hinge over just like you said. Now i can enter the service mode to check all the systems

@dok4867 3 жыл бұрын

Great video to at least get a clue on this refrigerator. Had a full frost freeze up, opened the panel covering the coils and of course it's frozen. Took out the two bottom screws but couldn't figure out how to get the bottom panel out completely. pulled the clipped sides but the top didn't come out. tried to remove the top, one screw, a pull but won't clear the top light and air ducting and didn't want to force it. Defrosted it, put it in 8 hr mode and waiting for the morning. Was in ADR mode(?) but changed to 8 hr mode and closed it up till am as said. Is it OK to leave in 8 Hr mode? Also, is ADR Automatic Defrost or ? Thanks again for all the good and only information I could find, you tube or other. David

@joylegoeken7897 2 жыл бұрын

Great video, Ben. I have a KitchenAid KRMF706ESS 5 door unit and last night the ice/water dispenser was starting and then stopping and starting and then stopping and not running long enough to dispense any ice. I set my glass down on the counter it started dispensing without even touching the paddle to depress it and activate the switch. It did this a couple of times and got me worried so I locked it out but even when locked out I can put a glass under and as soon as I depress the lever a bit the display lights up and beeps showing me the lock so it seems like the paddle switch is working just fine but then it just stops and starts off and on and again does it after I have let go of the paddle. Would the correct test be the water dispenser test #46 and if so what does that tell me is bad if anything? Any thoughts on what this might be? Thanks

@christianm1092 10 күн бұрын

I really appreciate the time you take to make these remarkably well done videos that are easy to follow. You are a true tradesman and helpful human!

@morejelloplease 2 жыл бұрын

cool, i love videos that get into the nitty gritty. i stumbled upon this because my water line keeps freezing up and it won't dispense water. it does this almost every day now and i'm not sure why. no error codes are shown, it's a 3 year old kitchenaid, same unit you have shown.

@johnbastawrous5736 Жыл бұрын

Dude, freaking awesome video! You helped me big time! Thanks so much for sharing!!

@J.P.W. Жыл бұрын

Great video. I've been looking for a complete set of codes. I have a whirlpool with ice maker problems. I can get it to make ice for a week or two by cutting the power to the fridge for 5 minutes or so, then powering back on. Then after a while it quits again. Hopefully these codes help me figure out a root cause and save the $100+ service fee.

@lindseyyah1 2 жыл бұрын

Outstanding informative post and I'm in Michigan Grosse pointe area, wish you were here... my kitchen aid could use some help

@kurtkris Жыл бұрын

Great video ! Thank you for this invaluable information!

@jeffbautista9935 Жыл бұрын

Man awesome!!! Thank u. This video saved me a a service call🙌💯

@lisacleboski8212 19 күн бұрын

No complaints about this video, it has been a life and money saver for me...repair guys replaced my ice maker motor on an assumption and still didn't work, I kept the old one and now I think I have 2 working ones lol. I bought all Kitchenaid 9 years ago, dishwasher was replace after 5 years, frig cost 1000+ in repairs, and now my Microwave/Confection has be replaced. So much to say about Kitchenaid but do not need any legal consequences, just don't buy it.

@Cristian-JustKeepingItReal 3 жыл бұрын

Thank you for all your videos and the info Ben.

@bensappliancesandjunk 3 жыл бұрын

Thanks for the kind words, it keeps me going.

@Cristian-JustKeepingItReal 3 жыл бұрын

@@bensappliancesandjunk Your welcome :) keep up with videos and thank you again.

@BlazerRox 2 жыл бұрын

This video (and a PDF I googled) just saved me from a shady repairman that opened my fridge, looked inside, didn't even touch anything, and said "yep you need a new icemaker - $499"). He obviously didn't even know about the diagnostic mode so I kicked him out, found this, ran my own tests, and found out there was just an air bubble in my water inlet line. Using the diagnostics I was able to run water-fill several times until it actually started filling. Lesson learned - Google BEFORE calling service, I would have saved the $99 "diagnostic fee" - which was just him looking at it with his eyeballs!

@J.P.W. Жыл бұрын

I've been looking for a pdf of diagnostic codes without success. What was the pdf you found?

@Escapeofthebride777 14 күн бұрын

@@J.P.W.it’s up on top of the frig! Just found mine in there just where he said it would be!

@russm3727 Жыл бұрын

Great informative video. I wish my tech was as knowledgeable.

@mrw1054 11 ай бұрын

Great vid! Thank you Sir! Very informative

@raulrobles2961 2 жыл бұрын

For code 6 is it testing the bimetal in the freezer evaporator or the thermistor on the refrigerator section?

@89DrFunk 3 жыл бұрын

Great video thanks man!

@user-oe2gs4jh5e 8 ай бұрын

Excellent job! Thank you

@elliottm9365 Жыл бұрын

Hi Ben, very helpful video. I live in Maryland and have a KitchenAid french door refrigerator freezer model number - KFIS29PBMS000. I ran all the tests in your video and they all passed. I have taken the refrigerator and freezer apart. This unit has two evaporators; one for the freezer and one for the fridge. Neither one is frozen over and both fans are running. The refrigerator gets to about 42 degrees and the freezer is only getting up to 22 degrees. Coils are clean. Compressor is running. Replaced refrigerator and freezer thermistors just in case. Trying 8 hour defrost mode now. Could it be low on refrigerant? Is there anything else to check? The new refrigerators are crap and I don't want to spend $3000 every 3-5 years on a new fridge. Any suggestions would be appreciated. Thanks.

@robertorodriguez4144 Жыл бұрын

Hi Ben I've noticed recently that my fridge is having power issues, it only happens once or twice a month (lights, water or ice dispenser wont work and it may not be cooling), if you leave it alone for a while or restart the fridge it will continue to work as normal, I suspect it could be the power supply or the main board but I'll like to order the part I need and I was wondering if there a diagnostic I can run to figure it out what is the right one I need.

@lavinephotography Жыл бұрын

Great video. My KA refrigerator looks identical, but my codes do not exceed 48, and there is no cover where the code paper work usually is. Is it possible to find the codes based on the model/serial number?

@TOPLS70 Жыл бұрын

VERY helpful video.

@jimcarrera4546 2 жыл бұрын

Awesome great! thanks this helped alot!

@coreypso Жыл бұрын

Thank you a million times over.

@clcnj5365 2 жыл бұрын

Test #4 is confusing. If it proceeds through the steps how is this identified? I don't see anything changing,

@javiertrevino4182 Ай бұрын

Well did answer you; I think I got stuck.

@morejelloplease 2 жыл бұрын

I'm back, did this fridge originally come with a bypass plug? I removed the water filter because I have a whole house water filter system but now it seems that it's leaking where the water filter would normally go.

@tesfamichaelgebreamlak7360 2 жыл бұрын

Hi Ben, I really like your video. Its very informative. I have the same kitchenAid refrigerator and I have changed the water filter and air filter with a new one but still it is not working and the display in the screen reads like this" Refrigeration Cooling is off" could you please direct me what to do to restart. Thank you.

@ibthemaster Жыл бұрын

Gr8 video, very much appreciated

@jorgealbertomontoyacardona7167 2 жыл бұрын

Hello, i have a question, in the code 6 it show me 3 not 1 neither 2, and the code 7 doesn't show, I think that can be bimetal with troubles or the sensors. I appreciate if you can confirm that, thanks for this video was very useful.

@gnaneshsiva664 2 жыл бұрын

Thanks for the video

@1ceman27 2 жыл бұрын

My kitchenaid fridge has episodes where is seems like it shuts off since interior lights go out and water/ ice dispenser isnt working but control panel still lights and work. The wine/ cheese and deli UI doesnt have light though. Any idea where i should start looking since there are 3 motherboards?

@Cassandra7866 2 жыл бұрын

So on test 6 I got a 2 bi metal open is that a pass or fail for the heater? Manual doesn't say what's pass or fail on test 6 having issues with fridge building Ice havnt noticed freezer.

@aaronlee891 2 жыл бұрын

Is there a way to manually send water to various parts of the fridge (i.e. water dispenser, ice makers)? My Whirlpool Fridge (WRV986FDEM01) won't dispense water/ice after our power flickered out, and it's making a mechanical clicking/clunking noise intermittently (10 counts at a time). We had a tech come out a few weeks ago, and he replaced the valve/motor that sends water to the freezer ice maker, since he said that was the only place he couldn't get water to. I really can't afford to have a $280 part replaced every time a storm comes through. Any advice/tips? Thanks!

@greenearthblueskies8556 3 жыл бұрын

Great video

@kama3269 3 ай бұрын

A great video. thank you

@nortonralph Жыл бұрын

You are an Angel!

@clayanderson7739 Жыл бұрын

Hey Ben! I have the same refrigerator you where talking about. Every thing is working fine except it keeps flashing the PO letters. I have ran the test, pushed the measure fill button and unpluged the unit with no success. Is there anything else I can try to reset unit?

@McCartneyville 2 жыл бұрын

Hello Ben. I have a Whirlpool Gold side-by-side gsf26c4exs03. It suddenly stopped cooling or freezing today. There's power and the fans are still pushing air out on both sides, but it's warm. Your procedure worked on mine to access diagnostics from the front panel. I have 02 open which is defrost. 06 bi-metal is closed. (passed). 16,17,24 are also open and 25=00. Do you think the defrost timer is bad? I am not sure how to manually turn that off to check. Thanks.

@bensappliancesandjunk 2 жыл бұрын

That doesn't have a defrost timer. It has a control board. I'd look at the compressor/relay and see if the compressor is vibrating and running, or if its not running well at all. Also check condenser coils underneath for impacted dirt.

@bobbrown8361 Жыл бұрын

On my kitchenaid refrigerator I hooked up an Reverse Osmosis water filter system to it and when I installed the included water filter in the upper right corner of the fridge the water comes out very slow, so I took out the filter that was included and the flow of water was much improved but now the replace water filter light comes on and I don’t know how to turn it off, opening and closing the water filter door on the upper right will not reset it like it would if I were putting in a fresh refrigerator filter, I was told I could run my own RO system through the fridge without the need to use the one the fridge came with, so is there a way to turn off the ‘’replace filter light’’ while using my RO system ?

@jersal873 2 жыл бұрын

Ben. Any idea why when I calibrate my water dispenser for one cup that when I go to dispense one cup it comes out as 1/4 cup range? Very odd. We live on well water. Maybe pressure in house water line isn’t strong enough? New filters coming soon in mail.

@Michael_Wild 2 жыл бұрын

My KitchenAid model KRFF507HPSS00 fridge is getting an E2 error on the Ice Maker. I ordered a new ice maker and installed it tonight. I tested and filled the water tray, tested the harvester mode, both worked. I still have the E2 error. Is there a way to clear the code?

@TheTurkishexpress 6 ай бұрын

Thank you for the video

@adriangodinez1467 2 жыл бұрын

Is there anyway to change my 8 ounce standard setting to let’s say 24? So I don’t have to go from 8 to 24 just to do the hand free mode.

@f22videos 2 жыл бұрын

If mine is not getting cold, witch test should i do first?

@Marlin365 Жыл бұрын

Great video! I followed every step, but couldn't figure it out So I had a tech here today to diagnose my KitchenAid KRMF706ESS00, and he said compressor is working but the fridge isn't cooling so it's likely the sealed system, and usually the leak is in the evaporator coil. Does that sound right, and could it be anything else? Thanks very much!

@user-gn4si4qo9z 9 ай бұрын

Hi Ben, this is a great video, so thank you very much. I am having a problem finding the codes for my fridge. The codes only go up to 43, and I was hoping my code was going to be 56 or 59 as I am having ice dispensing problems. I checked the top of my fridge as shown in your video but the sheet of codes was not there. Do you know how I can get my hands on these codes by using my model and serial number? Thanks,

@lifted5.4_pecina26 Жыл бұрын

Thank you Ben

@johnharpertrading6456 3 жыл бұрын

How do you change the temperature settings located on top of the interior drawer?

@bensappliancesandjunk 3 жыл бұрын

Usually the temperature of the chef's pantry or 4th drawer is controlled by the panel that's either on top of the pantry or on top of the 4th door. The wire harness that goes into each UI does have a tendency to break, so I'd check the physical wire connection for damage or defect.

@jimcarrera4546 2 жыл бұрын

Question is there anyway i can get a digital copy of the instruction manual for diagnostic mode and codes?

@scalecraft4663 2 жыл бұрын

Thank you for this info. My Top LEDS have been on in a very dim light. Changed out bottom led, bu didn't fix. What next?? Thank you

@giorginafrumpington8831 2 жыл бұрын

This is helpful. Our fridge (KRSC703HPS01) does not cool. Only the freezer. It's been this way since delivery. We've run all of the diagnostics and there were a variety of issues. HOWEVER, we don't have the sheet that shows what each service test number is for and I think they are slightly different than the one in your video. Test 44 - flashing 2 and then 23. Test 45 - flashing 02. Test 46 - flashing 00. Test 47 - flashing 11. Test 48 - flashing 02. Finding this code sheet has been a serious marathon. I've called Maytag (they first said they don't know what I'm talking about and then told me to call some place called the Appliance Hospital). I called the Appliance Hospital in the hope that they could send me a pic of the document and they, too, said they don't know what I'm talking about. I went to both Home Depot and Lowe's to look for the document hidden on top of the fridge - NO DOCUMENT. So, I'm at a loss. Neither of the techs that came out even looked at or did anything with the diagnostic screen - infuriating. So, I'm hoping someone here can guide me to where this mystery document exists on the internet or let me know what these codes are for? Thanks so much.

@stacyfavata5899 Жыл бұрын

I have the document

@biketothetop Жыл бұрын

Were you ever able to get the document?

@matthewleff2103 3 жыл бұрын

Hey Ben, I have this exact fridge and it appears to re running around 45 degrees and not at the 35 settings, I ran thru the diag codes and don't see anything coming back bad....any suggestions?

@bensappliancesandjunk 3 жыл бұрын

Please watch my other KitchenAid video - I did another video on cooling issues that are common with this style due to a bad evap fan.

@jjjohn5914 Жыл бұрын

Hi Ben ...thanks for the video. I have question and was wondering if u would be kind enough to answer. I have a kitchenaid krfc604fss00 with icemaker in the door. Can u tell me or direct me to info on how to remove it?

@dominican_usa_rd1980 Жыл бұрын

Excellent

@jw445ozzy 3 жыл бұрын

Ben, refrigerator is icing up causing fan to "saw the ice" which is making a horrendous loud noise. Parts are on order but taking forever. Any recommendations on how I can silence the noise. This is on a KitcheAid, same model as in the video. Thanks.

@fridayification 3 жыл бұрын

I"m having the same issue. Mind sharing how you solved it? We've been just unplugging the fridge to defrost the ice every time this happens...maybe 4 times a year. Obvisoulsy need a permanent fix!!

@lecovio Жыл бұрын

Hi is there a spacial way for the force defrost to work. I choose Long defrost, but when I exit service mode it does not start defrosting. I read somewhere something with the door switches has to be done. Thanks Ben as always you are great

@1lkylstsol 3 жыл бұрын

Same issue only have already replaced wire harness / thermostat assembly and still accumulates frost on condenser fins! Works great once thawed, for about two weeks, then builds up frost and fails. Only thing left to replace is PCB - already purchased - but passes diagnostic tests in this video. Makes me believe board is not the issue. #38, force defrost, stays on "Of" even though changed to both "So" and "Lo" to try and force the heater coil on. Could not find your email address in the about section.

@drakesmith9997 2 жыл бұрын

Hello. On #6 test I got a 03. What does that mean. My refrigerator is not cooling more than 50°

@rmarty550 8 ай бұрын

Excellent video very informative, thanks!!

@matthewruelas1128 Жыл бұрын

Does test 4 also put units with reversing valves into the "home" position?

@fasihul-mulk6093 3 жыл бұрын

Hi! My friend I have a WRX988SIBM03 Whirlpool Ref which is same as the one you did a diagnosis tests. Mine is not making ice. I have replaced the Ice maker and ice maker sensor but no luck. Can you help me solving the issue Please

@whalen368 Жыл бұрын

Had a fridge in storage it’s a kitchen aid French door. Does it have to be level for fridge to blow air? The freezer working great. Stays manual let plug in for 24 hours hoping will work soon. Right now no air coming in top. The bottom is starting to cool

@JohnMac-qy3sg 3 жыл бұрын

My mother in-law has that same refrigerator. Freezer not freezing but refrigerator is fine. Could that be the defrost timer ? Would the diagnostics show a code when put in diagnostic mode or would you need to go through list

@garymiller37 11 ай бұрын

Very helpful Video Ben: Unfortunately I have tried several of the tests you outlined in the video and still my evaporator will ice up after running for about a week and them the refrigerator section will start to climb in temp from about 35° to 45° and then hold. I assume this is cause from the lack of air flow over the Evap. The freezer section is working properly. When I took this apart the 1st time , I found the Evap Fan housing had been worked on before and the Styrofoam housing was broken. I replaced this housing including the fan and the fan is working OK. Test #1 & #2 show the thermistors to be within value and I have put the #7 test into 02 (Defrost in Basic mode) Any ideas what to look at next? Thanks for any input.

@sbaldner 8 ай бұрын

My KA fridge is doing the same thing, frosting up and temp rising. Replaced the fan and computer and it's still icing up every 2 weeks

@Picuala2 2 жыл бұрын

Thanks for the video! My fridge has been making a choppy, humming sound and I've been trying to figure out what the problem is. Your diagnostics video helped me scratch off some possibilities, but do you have any suggestions what the issue could be?

@bensappliancesandjunk 2 жыл бұрын

Very frequently, its ice on the fan behind the evap panel. The video immediately after this one is about taking the panel off in the back to see if there's major ice buildup, and how to resolve it.

@naheedkamal1619 2 жыл бұрын

My kitchenaid five doors freezer not working lnfact fridge as a is not cooling what could be the problem. Thanks in advance

@Libyan1984 2 жыл бұрын

@@naheedkamal1619 I have the same problem and the freezer also sometimes doesn’t work and thaw all the food inside it. Did you figure this out?

@le_mari 2 жыл бұрын

I am currently going through the same thing with the freezer and ice maker, any solutions you guys have found?

@ericharrison7545 3 жыл бұрын

Keep it up man . Thanks a lot

@bensappliancesandjunk 3 жыл бұрын

Thanks, will do!

@joeeckenrode4930 Жыл бұрын

Hey thanks for doing this. I had a question about test 3 (fan and motor test). The graphic on your vid shows what's tested for 1 and 2. However for 3 and 4 I am getting noise. What part is being tested in 3 and 4? When I put it on 3 it displays 13. The others show 01, 02, and 04.

@ggrr8t Жыл бұрын

Service Test - 3: Evaporator Fan and Air Baffle Motors ■ Control the RC and FC evaporator fan motors by depressing SW3 (01 = both fan motors off. 02 = FC fan on). ■ Depress SW3 once to advance. Service Test 3 will flash quickly and advance to tests 13/23 very quickly. The result is RC fan on, pantry air damper on. Pantry air damper will open and close automatically (13 = damper open, 23 = damper closed). Verify airflow inside pantry on lefthand side when damper is open (13 displayed). Airflow in pantry will cease when “23” is displayed. ■ Depress SW3 to advance to last step (04 = both RC and FC fans on).

@mojganhodaie637 11 ай бұрын

Hi Ben, very helpful video. We have a KSSC42QTS02 side by side that is from 2008. I can run diagnostics but the codes are different than the above. How do I find out what the codes mean? I can't find any manuals online describing the diagnostics code. Help pls! Problem is - Fridge/freezer not cooling. thanks so much

@patriciat7324 3 жыл бұрын

Whirlpool side x side model wrs588fihz00 shows error code two U's on top of each other (or maybe a W, or UI) with an X in a circle. Code only shows up when I open the refrigerator door. Can you help?

@alonzoolivarez3482 Жыл бұрын

@Bens Appliance, If my fridge is freezing up constantly, should I use step#38, the forced defrost mode? Already changed the mode step #7 to basic see if that does anything.

@alonzoolivarez3482 Жыл бұрын

Great video by the way

@ianboi1638 11 ай бұрын

Hey Ben, I have this same model and the LED lights were flickering then the entire thing lost all power an hour later. What do you suspect this could be?

@carlomiranda3799 2 жыл бұрын

Is the defrost heater/bi-metal supposed to be open or closed? Does it affect the compressor from turning on?

@crispy_buckets_of_chicken Жыл бұрын

Would also like to know please.

@sh2697 Жыл бұрын

I have a Kitchen Fridge KRFF707ESS01. It is frosting up every few months. I would like to ask you what I should do? should I replace the thermistor?

@rodneynierman1357 Жыл бұрын

What should the temperature be in the icemaker? The freezer is 5 below and the refrigerator section is 34°. The icemaker checks in at 10° but I get some melting when the icemaker does work but it is not working consistently.

@chrysklahr5056 3 жыл бұрын

Hey Ben, excellent video. We have a model WRF767SDHZ double door Whirlpool with bottom freezer. Our ice maker does fine making ice it does NOT, however, dump ice into the door dispenser anymore. Because of this video we ran the diagnostic code 57 to dump any ice then ran #56. It gave E5. We are now defrosting to see if that will clear the whatever might be the issue. If we get another E5 after the defrost what would be your best suggestion? Thanks in advance.

@wallissonsilva5821 2 жыл бұрын

Olá , minha geladeira não mostra nem 0 e nem 1 e nem 2 quando faz o teste dos termistores quanto do freezer e no refrigerador .Não mostra nada na tela quando chega no número 1 e número 2 do teste que no caso são ,termistor do freezer e do refrigerador .Pode ser problema da placa principal ou da interface ?

@robbo6460 Жыл бұрын

This video is fantastic. Thanks for posting. My compressor stopped running about 2 days ago. When I go thru diagnostic steps 1-3 I get an 01. When I go to step 4 and force an 01 the compressor and fan work like normal. What should I be looking for that's starting them from running when I'm out of diagnostic mode? Any help would be greatly appreciated. Thanks.

@barbaraharris5914 Жыл бұрын

Loved your video, I have no idea how my refrigerator worked you made it seem so easy even I could understand it.

@bachakil4388 9 ай бұрын

Thanks!!! 45 is giving me a 02. I’m not getting ice but it’s like the dumping system is stock.

@CellularFreedomManchester Жыл бұрын

I have a KRFC704FPS00 and it keeps freezing up. I can't find a evaporator fan kit for this unit. Any help would be appreciated. I'm guessing that's the issue based on watching some of your videos.

@dennissplett8517 25 күн бұрын

Thanks!

@thomasjacques5286 2 жыл бұрын

Appreciate your video's and they helped me troubleshoot and glean insight as to why the ice maker in our 2.5-year-old KRMF706ESS01 5-door fridge doesn't "HARVEST' ICE, but they haven't FIXED the issue. So far Lowe's have replaced 3 ice makers (the OEM + 2 replacements) a FORTH will be installed next week. Luckily we bought a 5 year extended warranty from Lowe's and it's been ZERO cost, but NO ice. I run all the Programs and at the end Prog 56 reports error code E2. All of them have had the exact same P/N: W10440219. What are the odds they have ALL been defective? What else could be causing the problem?

@jayville26554 2 жыл бұрын

That’s a failed home position error And happens when the sensor in the motor loses Signal of which position the harvester is in …three different icemakers could be a problem with that wiring harness that hooks your icemaker up , there are many different variations of icemakers Kitchen Aid usually has them either in the ceiling in the left of the fresh food section or one in the freezer or both the Bella series has them in the door I’m a certified whirlpool tech and I deal with this kind of stuff every day can be challenging when you have multiple issues of the same kind And repetitive failures of ice maker the source is key The most likely answer is that the ice makers are just failing due to faulty components used in them only use OEM if you’re under warranty that’s all we’re allowed to use the water pressure Being too low can also cause a problem like this because it just dribbles into the icemaker and then causes ice to jam the harvester. Good luck

@urbanearchitecturaldesign5048 2 жыл бұрын

Hello Ben I have this exact fridge and liked your video. My control board was bad and I just replaced it. How do I program it to put the fridge back in use? Thank you!

@chiphaby 3 ай бұрын

I am wondering the same thing, did you ever get it figured out?

@cp-qp6nn 2 жыл бұрын

Thank you Ben! I'm having an issue with my ice maker, I've just replaced the icemaker and now I'm getting water dripping out of the dispensing door, water in the ice bucket along with some ice, and water dripping out of the icemaker exit door. I've run through the service tests and found test 56 and found that the ice maker motor is out of position. (I'm not sure if I caused this by running and possibly exiting another test prematurely) Do you have any suggestions for me? I have a KitchenAid KRMF606ESS01

@candisewalker1915 6 ай бұрын

Did you replace your ice maker motor then?

@cheezencrackers 2 жыл бұрын

Hi Ben, thanks for this very helpful video. If you have a moment, I wonder if you could answer a question. I have the Kitchenaid KRMF706ESS01. Out of the blue yesterday, I saw and heard a door ajar light/alarm (with all doors shut). That resulted in the water/ice-maker not working. I unplugged the fridge, and after plugging back in the door ajar light was off but the interior lights were now out and the water/ice-maker still not working. Doing the diagnostics shown in this video proved that both refrigerator door sensors may not be good (they both show code 01 when doors are closed or open). But weirdly, tests 01 and 02 for freezer thermistor and rc thermistor don't even register a test code at all (just goes blank after showing the test number). Same goes for codes 46 and 56 for the water dispenser and ice dispenser tests. No codes appear, just goes blank. ... Any idea if those two tests are related to my interior light and water/ice maker problems? Or do you think it's possible that both door sensors could have failed at the same time? We had two VERY short power outages during a rainstorm the night before and the fridge is not plugged into a GFI outlet. Each outage happened for less than two seconds and no electrical appliances or clocks went out. Also those two short outages happened at least 12 hours before these issues happened. Any thoughts?

@sueyou2992 2 жыл бұрын

Hey Jim, have you figured out the problem? We had the same fridge and similar problems: it started with the door alarm, then lights went out, but we tried replugging back in, the lights came back flickering for a bit then went out again, but the cooling stopped working all together. After we replugged back in again, the cooling started working again, but not the lights. It's so frustrating.

@cheezencrackers 2 жыл бұрын

@@sueyou2992 Much to my chagrin, I needed a service appointment. About $350 and a month later it was determined that the cable/harness for the meat/cheese drawer had failed (no idea why) and needed to be replaced. I gotta say, I wasn't happy with how KitchenAid handled everything. You'd think that after spending $3500 on a fridge that it would last longer than three years without needing service... And we're empty nesters. No kids abusing the product. It just failed. ... I've been a longtime owner of GE products that always worked great. This is my first KitchneAid product and probably my last.

@totallyforgivenministries2897 2 жыл бұрын

Awesome video

@AndrewJMilan 2 жыл бұрын

Great video, Ben! Thank you so much for providing this. I ran the full set of diagnostics on my KitchenAid (KFIV29PCMS03) and everything passed. This is strange, though, as the ice maker is not making ice. I've tried the regular and Max Ice mode, but neither worked. I am stumped by something else that may be related: The water dispenser didn't work, but when I reset the filter (dropped the door, removed and replaced the filter, then clicked the door closed, the water dispenser worked! Then I did it again and the water dispenser didn't work. This seems to be some sort of way to take the water dispense out of commission. And when the water dispenser DIDN'T work, the ice maker DID. Very strange. Do you think there is some sort of connection or interdependency with this behavior that is keeping my ice maker from working, when the water dispenser will work? I know the dual water valve feeds both the ice maker and water filter/dispenser lines. Could there be an issue with that valve? Thanks in advance for any advise or additional troubleshooting you can provide. And keep the videos coming!

@aaahandy 2 жыл бұрын

This appears to be a common problem. Wish this guy would comment on his idea of the problem.

@jimfritts 2 жыл бұрын

@AndrewJMilan 2 жыл бұрын

Update/Resolution: After replacing the dual water valve the problem was fixed. Initially, when I buttoned everything up it worked. After 24 hours the water dispenser quit working, with a zero "0" code when the paddle was depressed. I pulled the fridge power for 60 seconds and plugged it back in and all is functioning well. Apparently this resets the main circuit board, even though the power was disconnected during the entire replacement process. It's been working well for several weeks now.

@ahm7058 2 жыл бұрын

Another common issue on these is the wires going from the ice maker in the door to the main part of the fridge. They are in a wear area so the wires literally get rubbed against metal every time you open or close the freezer door. Eventually they get cut or short out. I’ve had to add lengths of wire twice in 2 years to ours because they have been worn down so badly. Kitchenaid knows of the issue and doesn’t care. They run along the bottom left corner, in the gap you see when the door is open. I think there’s a grey plastic cover over them. Pop it off and I bet you find a problem or one that is coming soon.

@karenpagedemesa7474 2 жыл бұрын

Hi Andrew. Do you have a link on where to get the parts?

@mattr732 3 жыл бұрын

My diagnostic codes only go to 48. Any thoughts on where to find the codes for that setup? Ice maker is on the door and the panel is identical to the one in your video. Thanks!

@mrfikss 3 жыл бұрын

I have the same problem.