BESSEY Angle Clamp WS-3+2K

Рет қаралды 51,339

8 жыл бұрын

BESSEY® WS-3 90° angle clamp product demo.
Clamping angles and miters
The angle clamps from BESSEY® were specifically designed for clearance of dowels, screws or staples while gluing. These are tough and versatile tools that are made to simplify the work process and last in a real-world wood shop.

Пікірлер: 9

@TunaSoda Жыл бұрын

Tall parts, I use one clamp on the bottom and one on the top for 2x12 corners when making planter boxes

@alexsafonov7270 Жыл бұрын

I have these clamps and I find them to be useful. One thing that I would like to know: what is the purpose of the circular bump on the top side of the clamp, inside corner. There are very small letters that say “tube 20x3” If anyone can explain this, I would be glad to know more.

@MrDisgruntledGamer1 Жыл бұрын

Oh wow you can do T connections too!

@wannedoitallday 6 жыл бұрын

It does give a 90 degree however, it does not pull the wood together, so if you only want to glue your wood it will not do the job just by using this. if you, for instance have a gab between the wood, there will stay a gab.

@GlennLaguna Жыл бұрын

In what situation would you use just one clamp to glue a corner together without fasteners. Would you use one clamp to glue a wide piece corner together? Or even one at the top and one at the bottom, no. What about the center not being clamped without fasteners. Your point is weak.

@MrDisgruntledGamer1 Жыл бұрын

if you still end up with a gap it will end up with a gap with any other clamp aswell, the wood is probably bent or warped.

@jacquesmertens3369 Жыл бұрын

There isn't any type of clamp that can pull the wood together. You have to push both pieces of wood towards each other. The clamp cannot do that. I do agree that this type of clamp isn't the easiest for pushing from 2 sides while at the same type applying pressure by turning the axle. For glueing I personally prefer clamps with 2 axles, allowing you to dry fit the pieces first, then apply pressure to 1 piece, apply the glue and then push the second piece against it. The first piece is already fixed, meaning the second piece can't push the first piece out. By doing so it's easier to avoid a gap.

@jacquesmertens3369 Жыл бұрын

You're still charging an arm and a leg for this tool, but the manufacturing has been moved to China, and it shows. If I want to buy Chinese cr*p, which I don't, I would expect to pay peanuts, not the price of a tool manufactured in the US or Germany. Really, Bessey, by moving production to a country that doesn't care about quality, environmental standards or human rights, you lost me as a customer.