Thanks for doing these to the point videos without too much fluff. It’s one of my biggest fears to have my camera fly off, this looks like an amazing solution. I’ve got the PGY clamp for my bike and it’s been great. #pgy
@GetBusyLiving2 жыл бұрын
Thanks for that Michel Lokhorst, I appreciate it! Good luck in the draw! 🤞
@hdflame2 жыл бұрын
I found this video at the perfect time because I'm looking to replace my old cheap mount that no longer sucks! This #PGY mount will be perfect to replace it. I'm a new owner of the DJI Mini 2 and have enjoyed watching your videos. Keep them coming! Thanks
@GetBusyLiving2 жыл бұрын
Thanks for that hdflame, I appreciate that and appreciate your support! Good luck in the draw! 🤞
@racingguy9072 жыл бұрын
Right before the week deadline! Merry Christmas and Happy New Year. Love your videos#PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw Racing Guy! 🤞
@IanPerry2 жыл бұрын
This looks a LOT better than other suction mounts I have used. I really like the 360 degree possibilities. Stay safe! Ian :-)
@GetBusyLiving2 жыл бұрын
Yes it is very versatile!
@MarkusAlx2 жыл бұрын
Hello. Great piece of gear. Thanks for the review. Definitely this #PGY mount will be a good Christmas gift.
@GetBusyLiving2 жыл бұрын
Sure would! Good luck in the draw Markus Al! 🤞
@lappersaustralia28422 жыл бұрын
Great review of the #PYG suction mount. I really like that it doesn't use the screw in pins. That's got to save time when attaching and removing a GoPro.
@GetBusyLiving2 жыл бұрын
Sure does mate! Good luck in the draw Lappers Australia! 🤞
@mikethompson37102 жыл бұрын
Hey there Mate! Greetings from Florida. You are right the #PGY Suction Cup Mount does appear to be a nice addition to the kit. It sounds as if you trust it inside and outside your vehicle. Speaking of vehicles, I thought for the longest time you had a chauffeur but finally realized you guys simply drive on the "wrong" side of the road! As always, thank you for a comprehensive report well presented.
@GetBusyLiving2 жыл бұрын
Ha ha love the chauffeur comment - that would be nice! 🤣
@WeretheRoberts2 жыл бұрын
I really like the way it’s set up for an action camera, too. We put a GoPro on the dash a lot but it sits too low and the extension arms seem to move too heavy and the 3m tape isn’t strong enough to hold it to the dash. This could be a real solution for that. Cool product Mike! #PGY
@GetBusyLiving2 жыл бұрын
Yes it would be perfect mate! it's very flexible! Good luck!
@dumdee19722 жыл бұрын
This looks good! #PGY Merry Christmas Mike Stay safe.
@GetBusyLiving2 жыл бұрын
Thanks for that Dumdee! Good luck in the draw! 👍 Merry Christmas to you too!
@toddwinchester61392 жыл бұрын
Merry christmas to you. This looks really cool. #PGY
@GetBusyLiving2 жыл бұрын
Thanks mate same to you!
@Alesscamera2 жыл бұрын
Great video, I’ll buy it
@GetBusyLiving2 жыл бұрын
Nice! Glad you enjoyed it - cheers!
@CampbellZeroOne2 жыл бұрын
Already have a suction mount which I've been able to put to good use. But as you said Ian, this one having a ball mount system makes it much quicker to set up. Also, it would make it possible for me to use in conjunction with the Ram Mounts on my motorbike. Super handy. #PYG
@GetBusyLiving2 жыл бұрын
Good luck in the draw Campbell Zero One! 🤞 Oh, plus my name is Mike, not Ian...🤣
@CampbellZeroOne2 жыл бұрын
@@GetBusyLiving Yeah. That's how we spell it in Scotland. Pronounce it as Mike though 😉😂
@SHerbeck912 жыл бұрын
The cool thing is that you can use it for regular cameras, and it is so easily attuned to setting up a camera at the right angle for the subject. #PGY
@GetBusyLiving2 жыл бұрын
Exactly right mate! Good luck in the draw SHerbeck91! 🤞
@lucasjack30102 жыл бұрын
Can't believe I just came across this channel now?! Will be binge watching videos this weekend. Hi from Salt Lake City,UT #PGY. This would be fun to add!! I saw PGY had a 3 Suction cup option...is that overkill?
@GetBusyLiving2 жыл бұрын
Thanks mate I appreciate that. No it's not overkill if you are using it for a heavier camera, or if you are filming in extreme conditions.
@Sheddie142 жыл бұрын
I’ve actually been look for one this video is perfect in terms of #PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw Shedrach Ogungbe! 🤞
@jhdee2 жыл бұрын
Nice review as always #PGY 😉
@GetBusyLiving2 жыл бұрын
Thanks for that John Davies, I appreciate it! Good luck in the draw! 🤞
@Choppy123100 Жыл бұрын
Nice video bud. What phone mount will attach to the pgy
@GetBusyLiving Жыл бұрын
Cheers! Any 'standard' action camera mount - essentially the gopro ones that everyone has copied!
@johngibson28702 жыл бұрын
As you i find #PGY amazing products...... Keep up the good work as I look forward to watching your vids Stay Safe Fae Scotland
@GetBusyLiving2 жыл бұрын
Thanks for that john gibson, I appreciate it! Good luck in the draw! 🤞
@fwnakos2 жыл бұрын
We love products from #PGY and your excellent review !!!! Thank you ;)
@GetBusyLiving2 жыл бұрын
Thanks for that Xenophon, I appreciate it! Good luck in the draw! 🤞
@gebear12 жыл бұрын
Looks a tidy mouny for my gopro... keep the videos coming. #PGY
@GetBusyLiving2 жыл бұрын
Thanks for that Bear Pa, I appreciate it! Good luck in the draw! 🤞
@6.Actual2 жыл бұрын
Looks very useful. Thanks for the review. #PGY
@GetBusyLiving2 жыл бұрын
Thanks for that 6 Actual! Good luck in the draw! 👍
@streetglide10372 жыл бұрын
Thanks for the #PGY review.
@GetBusyLiving2 жыл бұрын
Thanks for that Street Glide 103! Good luck in the draw! 👍
@benjamindover88162 жыл бұрын
#PGY Did you use it on the interior of the vehicle on the dashboard? Seems like it would work well to help with a dash cam. Would it work better on the dashboard or the windshield?
@GetBusyLiving2 жыл бұрын
Windshield generally, the smoother surface the better and nothing is smoother than glass 👍
@1flyjcLIB1drone2 жыл бұрын
Hey man, right on time. Just posted a video shot with dji pocket 2. Had to tape it to my dashboard. Will definitely get one. Though of entering but if I won, you would have to pay shipping to the US.
@GetBusyLiving2 жыл бұрын
Yes mate that's right - I've recently sent packages to Scotland, Germany, Australia and the US!👍
@1flyjcLIB1drone2 жыл бұрын
@@GetBusyLiving question, are you a comedian by "trade" ? You give great information in a comical way. Good job.
@GetBusyLiving2 жыл бұрын
@@1flyjcLIB1drone Ha ha no mate I'm not, but thank you for the compliment 👍
@hopeless7722 жыл бұрын
Wow what a nice video and idea this #PGY suction cup mount will gonna allow me to take pictures of myself because i don't have anyone to take a picture of me and also i don't have any device to hold my phone to take pics wish me luck.
@GetBusyLiving2 жыл бұрын
Thanks for that Hope Less✔! Good luck in the draw! 👍
@hdflame2 жыл бұрын
Glad I saw this video about the #PGY mount because I thought I was already subscribed to your channel! Now I am. Can't believe I hadn't subscribed cause I've watched a bunch of your videos.
@GetBusyLiving2 жыл бұрын
Nice - welcome mate!
@GetBusyLiving2 жыл бұрын
Hey there - congratulations! You have won the suction cup mount! Email me your mailing address at golfingpunk@gmail.com and I will get this sent as soon as possible. Thanks again for your support!
@hdflame2 жыл бұрын
@@GetBusyLiving omg!! I just saw this! I’ll send you an email now.
@hdflame2 жыл бұрын
Email sent
@hdflame2 жыл бұрын
Thanks
@markkramer29082 жыл бұрын
Would the #PGY mount work safely on a motorcycle saddlebag? I have the GoPro mount but worried about it falling off and losing it all.
@GetBusyLiving2 жыл бұрын
If it is a hard smooth surface then yes it would be fine!
@jimthorleydronefootage2 жыл бұрын
Looks a great bit of kit. Certainly more versatile.than any mounts I have.#pgy
@GetBusyLiving2 жыл бұрын
Hello again Jim - yes mate it's very handy!
@jsnezy82882 жыл бұрын
That #PGY mount will be perfect for me new One X2 😁
@GetBusyLiving2 жыл бұрын
Fingers crossed! Good luck in the draw Jsn Ezy! 🤞
@ricardoluis90182 жыл бұрын
This #PGY suction cup mount is indeed better than the GoPro's original one. I have the GoPro one, and is a pain in the ... to switch the camera to another position. Thanks for the review!!
@GetBusyLiving2 жыл бұрын
Yeah totally agree abut the GoPro one. Surprised they have stuck with that design after all these years. Good luck in the draw Ricardo Luis! 🤞
@Congo81 Жыл бұрын
I ve got one of these and will be going drag racing tomorrow. I have a instashot360 to mount to it for some great footage. However I m a little hesitant to mount it on my car as I m not sure how fast I can go without it flying off. Like you said in the video, if mounted well it should hold but I wonder if it’s good for 150mph.
@GetBusyLiving Жыл бұрын
hey mate sorry for late reply, how did you get on?
@Congo81 Жыл бұрын
@@GetBusyLiving that’s ok. I didn’t try it lol. Was too scared it came off. I will experiment with a old Go Pro so if it does come off it won’t be an expensive loss.
@GetBusyLiving Жыл бұрын
@@Congo81 Fair enough mate! Yeah better to be safe than sorry eh?
@Congo81 Жыл бұрын
@@GetBusyLiving yeah, I just wondered if anyone else had maybe used this at high speeds
@GetBusyLiving Жыл бұрын
I guess those that had and had a bad experience are keeping that to themselves ha ha
@acvideos12422 жыл бұрын
#PGY I would love to have this product. Thank for your video.
@GetBusyLiving2 жыл бұрын
Thanks for that Alain! Good luck in the draw! 👍
@viralhype_2 жыл бұрын
Quick release clamp pins! Wish these existed a standard for all action cams. This looks decent! #PGY
@GetBusyLiving2 жыл бұрын
Yes they are very handy! Good luck in the draw Viral Hype! 🤞
@joepowers37312 жыл бұрын
That is a really cool mount #PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw joe powers! 🤞
@Kjlim2 жыл бұрын
I have the Pgytech suction cup mount shown here. I would only use it with great care and not outside the car. My experience has been the suction on the body of the car is not reliable and can easily falls off. It has even fallen off when attached to the window of my car no matter how hard i push the suction cup. I definitely do not recommend using it outside any vehicle. I am looking for a more reliable suction cup that actually sticks. Btw does anyone know the suction weight tolerance of the Pgytech mount? In my opinion, it's not much. I tried attaching the mount on a clean flat glass table and it did not take much effort to pull it off. This is a worry for me
@GetBusyLiving2 жыл бұрын
Don't know the weight tolerance but it's pretty solid mate!!
@KimFieldstad2 жыл бұрын
Awesome #PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw Kim Fieldstad! 🤞
@allstarbury Жыл бұрын
Whats speed limit for this cup if we mount camera to car roof?
@GetBusyLiving11 ай бұрын
there is no speed limit it all depends on the surface it is attached to and how bumpy you get. Use a lanyard as well just in case if you are going super extreme. For day to day b roll shots travelling along normally it is totally fin!
@allstarbury11 ай бұрын
@@GetBusyLiving exactly .I was even in contact directly with pgytech and they told me use speeds under 80 kmh I want to test mouting on roof closer to front glass .As i dont want any car parts to be visible on camera point of view .I have insta 360 4k boost model BTW. When i am in city it will be fine as traffic is often jammed so speeds is around 40-60kmh .Outside city (not highway) you need to speed up sometimes . Its dangerous to keep this mount during rain ?
@theeditorrestrial Жыл бұрын
what if you got a car accelerating to 180 or more mph? I would imagine the three cup clamp would be the way to go...
@GetBusyLiving Жыл бұрын
180 or more!? Yep I agree, the 3 cup clamp would be best for that.
@sccrdfi2 жыл бұрын
That's perfect for my Osmo action cam #PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw Mike Macandog! 🤞
@thailandtravel6626 Жыл бұрын
Nobody is mentioning the diameter of the suction cup. How much is it? And what is the height of the device when the arm is horizontal? Thank you for your help.
@GetBusyLiving Жыл бұрын
Oh sorry I will have to get back to you on that one. I have moved to Shanghai and left this in Auckland! You can kind of figure it our by looking at the camera it is holding?
@utmatttraynor2 жыл бұрын
I guess this means I have to keep my car cleaned. Happy Holidays! #PGY
@GetBusyLiving2 жыл бұрын
Good luck in the draw Matthew Traynor! 🤞
@utmatttraynor2 жыл бұрын
@@GetBusyLiving Bummer I didn't win. Thank you for holding the drawing and for dropping the news about DJI in 2022. If that person doesnt get back to you about the suction holder, I would be more than happy to step up.
@dronevideographyproduction2 жыл бұрын
Another great video! Thank you for this amazing giveaway. I would love to win this accessory since my old suction cup sucks... or doesn't suck anymore. 😜 #PGY
@GetBusyLiving2 жыл бұрын
Thanks for that Drone Videography Production, I appreciate it! Good luck in the draw! 🤞
@abelm.s96612 жыл бұрын
Another stuff
@GetBusyLiving2 жыл бұрын
Thanks Abel m.s! 👍
@mathiassiebert12172 жыл бұрын
You only talking about your giveaway. Why don't show me how to get the GoPro to the cup mount? It's the most important step.