For the wrap up and recommendation go to 1:11:25

Thanks for taking the time to make this video. I'm still rocking the thin film that came on my S20 ultra screen. I also appreciate that you took the time to apply each one. It helps to let's us see the level of frustration/ease and the amount of time it can potentially take to apply them. I guess the magglass will be my winner and I will be using the link you provided!

I actually came to this video for "how-to" (instruction) because I just installed my first film protector -- which I already love. You didn't demo the brand that I purchased, but you put me in the right direction! What I noticed rather quickly is that the corners problem is avoidable ... I was overzealous in trying to elimate bubbles and that resulted in a teenie bit of stretching in my first corner. I stopped trying so hard with the others so I ended up with three perfectly-laid corners. I carefully trimmed that first corner and it's staying down quite nicely. I kept your video running to the end while I was finishing up and have to commend you, not only for the "how to" (for me) but your reviews (on behalf of others). Thank you for all of your work and for being an excellent host!

After watching and reading basically all reviews, its safe to say, invest in a good case and call it a day.

Guys... Don't be silly. After applying a screen protector rescan your finger print. If you are putting anything between a sensor and it's subject, you should you recalibrate. Subbed for the other useful details though.

I greatly appreciate you testing all of these out. I've been trying to make a decision for two weeks because i have two phones that need them. I was really hopeful for the tempered glass with the adhesive because the finger print lock is a must. Plus the fact that we both use the phone to play different games, the cut out finger holes will just get in the way. Only thing that is different for me is the case I use is a UBPro, and the front case piece literally goes over the front curved edge of the phone, and might hold down any roll of a protector. I look forward to the Whitestone one.

This video is brilliant. A perfect reminder of why I don't intend to bother with Screen Protectors anymore. I've always used them in the past, usually fitted by the Apple Store, The Carphone Warehouse, or an independent Mobile Phone shop near me. Why? because I've tried (and failed) countless times. Regardless of how careful I am, or how closely I follow the instructions that guarantee 🤣🤣"bubble free" installation. I've just bought a budget Samsung A41s, paying £149. Bought some protectors, took messed up (what a surprise) the installation, so took it 2x to the Mobile Phone shop, who charged me £10 for fitting and then both times left it with a bubble which, in spite of their assurances that it would "go away," (they rarely, if ever do) it didn't. So, all in all, I've forked out over £20 on top of the price of the phone to end up with no Screen Protector on the phone. What a racket these people have going on, even more so when you get one Protector in the pack and that fails and they tell you to contact them and they don't bother to reply. So, enough. I have a case on it and will risk it with the naked screen.

I appreciate you trying these protectors out to give us an idea of what to expect. The one thing I've noticed is that the lines and some of the bubbles actually go away after having the screen protector installed on the phone for 1-2 days. So, Its not really fair to make a decision immediately after installation.

Remember wet application protectors require 12 hours to fully dry & adhere. But totally agree the ‘rubbery’ feel it sadly leaves on the screen is for me unpleasant. Curved edges suck ...

Better protection with glass, but rarely works well.... so i decided to go for the film screen protector.... and take my chances, but let me share if you want to take your chances. I found the perfect film screen protector that wraps around the phone and gets held by the case... and also the fingerprints scanner works great with it. It's called "Ringke Easy Dual Wing" under $12 and comes with 2 at Amazon. I got the note 20 ultra. But they should have one for the S20. I looked at this video hoping to find a glass one that's good. But I'll have to stick to the film one to avoid throwing my money away with the glass ones. Thanks for the video and your patience, surely saved us a lot of money. Thumb up and you just got me as an additional subscriber

I have the spigen case (slim armour, 2 credit card slots) and the spigen screen protector and they go together perfectly... there is no bubbles or raising anywhere and every sensor works amazingly... they also include an entire installation kit in the screen protector box

Excelent video. Great detail Your video shows the pitfalls if we were to choose the wrong screen prorector. Keep this approach. It's appreciated.

I've spent so much money on screen protectors, some cost as much as 30 to 40 dollars a piece and same results. Thank you for this!

Thank you soooooo much!!! I really appreciate your time and effort, saved me a lot of frustration. I have many of the same issues with the curved screen phones! Thanks again.

Based off of a bunch of recommendations I tried the Whitestone dome. I literally just installed it like an hour or two ago and it works great. As long as you put it on right the edges all stay down and the fingerprint sensor works great. I just barely touch it and the fingerprint sensor reads.

Very VERY informative video my dude. I literally watched the whole video while at work too. Definitely helped me with making a decision. 👍🏼

A couple comments: 1) having a summary at the end - either verbal or in chart form would have been super helpful. 2) while your assessment of the merits of each screen protector is highly useful information, watching you tediously apply each one is not. This video could easily have been a punchy 15 min review instead of the protracted sleep aid that it is.

Thank you for the time to share this. I actually just bought 2 of the S20 plus phones and now I m in this issue of finding a screen protector that works but without this annoying circle for the fi ger print. From your videos I would not get anyone of them. I may find at home an old tempered screen protector that is still new but for a flat screen phones. I would care less for the finger print thiug I may use the pattern or the eye iris to unlock if the S20 plus supports it. I may also get a good cover that is raised at least 2mm above the screen and skip all together a screen protector for this phone. This is going to be my last curved screen phone. Thanks again

Gracias! Acabo de ver el video y ahora se que no debo comprar, tal vez el MAGGLASS sea el indicado. Gracias por enseñarnos todos los protectores de pantalla, buen trabajo! 👍🏼

great video. I lived through the curved screen issues with my s8 days and upgraded to the s20 FE. I recently netted an s20 5g super cheap and was wondering if i should make the 5g my main phone and sell the FE. I came here wondering if curved glass protection had gotten better and came away with the understanding that the ultrasonic fingerprint sensor is the bane of glass protectors. This is not the case with the optical sensor on the FE, I have a plain as shit tempered glass and zero problems reading my finger print. I am def going to be wary of ultrasonic sensors in the future. Optical may be a little slower but it is so much more resilient.

You took a long time and heap of effort to make this video for us out here and it is really appreciated. Yes, I did enjoy it as you didn't pull any punches and gave them all a fair go. Thanks and a BIG thumbs up.

I just put mine on I can't believe I got it perfect no air bubbles the edges look good everything I tip for advice would be to wear rubber gloves while you're installing it cuz it helps from any kind of fingerprints remaining on the glass

I picked up an Asbellt for my S20+ which is almost identical to your Alinsea. Exact same accessories came with it, the orange tools, the stickers, etc. I found that it was picky to start scanning the fingerprint, but if I kept on with it until it completed, even with the prompts to push harder etc, it worked very well after.

Great effort, Mate! Lots of detail. For what it's worth, I've just installed a Hydrogel screen protector (this one by EASTele) and even though I know time will tell, the initial impression exceeds all other protectors (glass, plastic, etc.) I've used before. I'm very impressed so far.

Thanks for the video! I shelled out for the Whitestone Dome Glass for the first time on my S20+ since my normal go to for Note 8 didn't have a glass one out yet...nerve racking install but works perfectly and looks great! Glass screen protection without any "cutout" for the fingerprint.

I haven't finished this yet, but it is very disturbing that almost all of the manufacturers says their product is good with the fingerprint scanner. What a lie. I'm on the hunt for another protector and from what I can tell short of no protector, what to do? I'll continue till the end, but I'm not very hopeful. Thanks for your labor intensive video, it'll save most of us money but more than that the aggravation

For the ESR one, you should review their liquid skin full coverage screen protector. It is the one that supports ultrasonoc fingerprint. The one that you reviewed was stated by ESR themselves that it does not support ultrasonic fingerprint

wow this is the longest video yet. I love it and it's so kind and nice of you for being so caring towards your fans way to go Mr. Tony. you're really a good person at heart 🌸👌

For two years, Spigen neoflex and spigen case on samsung s9, I've never had problems with the edges. I ordered the same set for s20 ultra.

I the spigon one, and it's perfect. I dont have bubbles, it sticks down on the edges and the fingerprint just works perfectly. You also have to dry it. I had like bubbles but after 3 days all where gone.

Thanks for testing all these products out! I was on the edge for buying some of them and this really help out.

I'm going to recommend HD Clear screen protectors from Tauri. Just bought for my s21 and installation was awesome. It is soft film but the process was very easy with no bubbles and easy fingerprint readability. They also give a free wireless charger just for giving a review ! Total cost 13.99

Great video, Tony. I just installed an LK Glass Screen Protector, which I got from Amazon, for my Samsung Galaxy A10e. It comes with 3 screen protectors and an installation tray which makes lining up the screen protector to the screen very easy. There are a few air bubbles around the edge. They are noticeable when the screen is black and not when using the phone, so that doesn't concern me. I would rather not lift up the edge of the screen protector to try to get the bubbles out. I find with previous ones that it breaks the seal around the edges. So far the adhesion around the edges with the LK seems pretty good, but I will have to check it in a few days. I have previously used Supershieldz and Mr. Shield from Amazon and they did not adhere around the edges and let dust under the screen. Is it that hard in 2022 to make a glass screen protector with enough adhesive around the edges so that it doesn't come up? I guess so. This LK seems better so far.

I’ve had the same problem with film type screen protectors with Samsung phones since the S9: edges pop out & ruin the look of my phone, the film’s adhesive eventually loses its stickiness resulting in me needing to replace it. I’d repeatedly fix the edges but they never stay down. I don’t want to use a glass screen protector since I change to a variety of cases depending on my work situation, even if they’ve been shown to be the best ones for edge screens. I tried “liquid screen protectors” before & they’re mostly snake oil. I’ve used Spigen film screen protectors in previous iterations of the Galaxy phones. As you’ve mentioned, they stick fairly well & accommodate _some_ cases, but their clarity really sucks. You already commented on the “orange peel” texture, I’d like to add that you can notice tiny rainbowing lines on the film too.

i watched your video after failing to put a tempered glass screen protector on my phone... i went a little to hard on the edges and my squeegee kinda broke a bit of the edge, needless to say, i started freaking out.. i wish i didnt scratch the original screen protector, then i wouldnt have to deal with this. your video helped a lot tho.. gonna check out the store tomorrow and HOPEFULLY they have the spigen one... thank u for your hardwork!! :)

Thanks for all the work that took. Very informative. The next review whitestone is well done

Just bought Procase tempered glass screen protector from amazon, glass, no glue. Works perfect with the fingerprint sensor on my tab s7plus. Recommend it, no fancy guide case or anything but it has no bubbles

I watched 50 minutes to realize that in Sweden where I live, none of these are available

I love this video! Very informative & helpful, thank you for taking your time for this. Do you have an opinion on iclover 3 in 1 for s20plus or could you do a review? It certainly looks good on paper, but ya know? I have just purchased my s20plus & don't want to use it till I can protect it. Thank you!

Thanks for testing all these out for us! Really helpful and saves a lot of time and money!

Wow ! I'm really surprised about video and learned a lot which was unknown about screen protector. thanks a lot.

Really like your comparison. I have to say I am glad the phone I have had for several years has the finger print sensor on the back. I think after seeing your video that will become a huge selling point in my next cell phone. Haven't seen any of your other reviews but I think it is worth hitting the subscribe.

I thank you for doing these reviews. To show what we need to do and some did not work if not all of them it saved me money and time.

Thanks for an amazingly thorough review!

I think your right. I have a T-Mobile Revvl+ and I upgraded to a Supershieldz tempered glass protector and even though I did everything right the edges all around don't really lay flat to conform to the phone screen surface. I should have chosen the plastic instead of the glass but I need some kind of protection. I'm really clumsy with phones.

Wasn't too long for the info we got. You just saved us some money and time.

Great Video, could you also review the ringke screen protector for the S20+?

I've bought a cover identical to the MP-Mall an the LK ones that you used. It is true that the edges don't adhere to the display, but it's possible to soften the plastic film by warming it with an hairdryer. In this way they will adhere perfectly. Very good result with my S20, and the fingerprint sensor is now much more responsive than it was with the original cover 👍

Thank you for the video.. and don't be nervous, there is no reason to be... U doing great

Hey great video! Nice to see another YT'r covering screen protectors. Have you tried Whitestone yet?? The reason why the UV glass kit you used didn't work is because its to thick. The Ultra sonic FPS needs glass protectors to be less then .40mm thick, otherwise its to far for the sensor to read the information back.

I personally installed the Spigen NeoFlex on my Galaxy s20 ultra without the case and it went fine. After the sprying and the wiping just let it 5 mins to dry, installed back the case and very good! it feels great. And i am not an expert on the matter! Mandatory to puto a protector on S20's.... which screen looks to me more easily to be scratched than earlier versions....

Waiting for the Whitestone Dome install. I had to give up trying those because I just don't have the hand-eye coordination anymore. Great video thanks. Liked and subbed

Any recommendations for case friendly tempered glass where finger print scanner doesn't matter? I've been looking at the tamoria, but not completely sold. Thanks!

Thank you! Its so devastating when you put a screen protector on perfectly, and the edges come up. Make you want to pull your hair out

So, take any of these and cut them prior to installation. You will trim off about 1/8 inch each side x 4. This will enable the screen to sit flat on the flat part of the phone. This will leave 90 % + of your phone screen protected. The phone cover will protect the sides, back etc. This worked very well for my SS G 8.

Hello, I subscribed and liked. Honestly really appreciate your work here. Getting a great screen protector is now a very difficult for consumers thanks to the advent of in-screen fingerprint sensors. (I HATE it in the screen. Not as reliable as it was on the back. But I love Samsungs). I have suggestions. Nobody is going to appreciate watching you install screen protectors for over an hour, that's very boring. You have a quick summary at the end noted in the comments (thanks for that), but the summary is too quick. Having skipped all the testing to get the result I only have your recommendation but I don't know the why?. The questions I had when I searched KZfaq on which protector is best, they remain completely unanswered. And you went through all that effort with all the choices from Amazon, you have the answers I want to hear! Course I don't wanna spend over an hour going through what you went through to get those answers. So.... Five minutes. Ten max. This is how long your video should be after editing. It's enough time to tell me what's wrong with these crappy protectors by so and so and such and such, and why these other protectors by these guys or the other guys work great and are a good buy. Links in the description. Awesome. Your video would have a nice title card, you narrating throughout, start with an intro saying what you will be testing (installation, picture quality, feel, fingerprint, etc.), maybe what you'll be expecting, then shots of you testing while you narrate the results. For example, was this one easy to install? Tell me and show me, ten seconds. How'd it look? Ten more. Feel? Fingerprint? Five to seven seconds. Move on to the next one. Was one like the previous one? Same issues, slightly better or worse? Just gloss over it ten seconds or so while showing a shot of you throwing the box in the trash can. Honestly it depends how many you tried, maybe sort them by price. If you tested a whole whack load of them, like a 100 +, ten minutes max! If you tested 20, five minutes is all you need to show and tell me all I need to know about them all. To be clear, those questions I had when I searched KZfaq for answers and found you: 1. ) Tempered glass or flexible film? (Is it true glass has significantly better impact protection? Film scratches easier? Glass doesn't stay on phone or wrap around curves well? Film stays on better but quickly looks like sh*t? 2. ) Installation easy? Did you have to apply some glue? Get glue in the speaker? Bubbles? Weak adhesive? Corners peeling? Straight alignment? Painless or frustrating? 3. ) Does it work? Protects from impacts/scratches? Fingerprint work? Looks and feels great? Does it have a ridiculous visible circle where the fingerprint scanner is? It does? That's retarded. That's ridiculously retarded.

Yo thanks for all this effort man you are the best You saved me time It sucks that it is hard to find a good one because of those edges and fingerprint scanner

NIce video, from what I have seen online the whitestonedome one works with full cover glass and the fingerprint reader works ok. Very expensive though.

Good info. I'd suggest doing them individually so it's easier to watch with smaller videos. Not a lot of people have an hour to spare. I still subscribed and liked though.

Thanx mate. Wonder what u think about rhinoshield impact flex?

Great review going through in detail, would've cut down the time showing the unpacking and wiping and from my experience, you need to have your finger/thumb on the sensor for a little longer when you have a screen protector.

When smoothing out the edges on the curved glass, you need to start at the middle, not the corner. There is an issue with the corners, but I think it would be less bad if you started at the middle. Also, when you do the wipe-downs, I think you'd have more success with the adhesives at the corners if you put some special effort into removing fingerprint oils from the corner glass. Overall, I really appreciated the effort that went into this. Your video quality is really good! Thank you.

Makes it very hard too choose but thanks for video at least we know what NOT to choose lol. Currently I have a kind of plastic film one, is actually very smooth to touch and finger print sensor works amazing but the sides and edges lift off 🙁 I now an really annoyed I even tried a GLASS one from my local mobile gadget shop would rather of Kept the original it came with. But again this one iM using is quite responsive and finger print sensor works amazing, but as soon as I put my case on find it's lifts edges even more lol. WHITESTONE can't wait to see that video 😉👌

If you let the adhesive dry for a few minutes before trying to push down on the edges they would stick a lot better.

I got the REFUN Screen Protector that was recently released. I so far has been the most consistent and easiest to install. Could you do a follow up video with this one?

I noticed that you had 'accidental touch protection' turned on in your settings. I believe that makes the screen less sensitive to touch. Try turning that off to see if it helps with the finger scan problem.

ZAGG Ultra clear+ is a great screen protector. I applied it with care, had 3 little air bubbles, which dissappeared over night. Now it looks great, like I don't have it on. Very satisfied. 10/10

This screen protector is amazing. I managed to put it on relatively easily and there are no air bubbles at all! Really helpful video and it looks and feels as though my phone is bare! Top marks!👍🏾

Bloody good review just bought s20+ plus got protective otto case back but was looking at the best way to protect my screen looking at the liquid gel at my local harvey and norman store they do it for u but just deciding best way to go.thanks for review.

Very informative ! great Job....I learned so much...Thank you.

*** Amfilm tempered glass w/liquid adhesive aorks*** it's similar to Whitedome, and they also give 2. #1 is doing it in the manner in the instructions. #2 the BIG difference is that you have a circular metal weight positioned on top of the sensor location. It's the whole key to the application. The protector is cut slightly smaller than the outer curved edge...curved edge glass won't function either. I don't have touch sensitivity turned 'on' either....I have a skin on the rear and a minimalist clear phone case and it survived a hard drop on the top edge @ 4 feet. I had to replace the protector...but the S20+ curved glass screen excess of $300 to have replaced.

@highTechCheck don't say sorry, you have nothing to apologize for. People should be grateful that you tested all of these screenprotectors. You know exactly how i feel about those fingerprint reader cut-outs and screen protectors not being case-friendly. Thank you so much

Thank You for a good presentation!

I bought the Spigen Neoflex with the Thermoplastic Polyurethane protector for the Galaxy S10 for eleven dollars. I followed the directions and watched the video. The screen went on flawlessly. The edges stayed down and there were no bubbles. It went on perfectly. It looks great and feels great. Great buy. I recommend this to anyone looking for a decent screen protector without spending a fortune. Your video didn't do this screen protector justice.

I liked the video. I don't have the S20, but after seeing all the problems you had with the screen protectors, I can tell you one thing: My next phone definitely won't have an in-screen fingerprint reader. The only protectors you used that even looked like they had a *chance* of workinghad a hole for the fingerprint. But what good is that? That hole is just a point of vulnerability for the phone.

okay, i'll just keep the original screen protector on.

Would you say that the # 12 can help hide light and some deep scratches? If not than what type of screen protector you recommend to hide light/deep scratches?

*Young Man, you have the patience that many 'Incuding myself' would have taken a "Hammer" to In frustation. In my opinion, I say you undertook a task to help others with a caveat by saving them money! PS; Don't ever apologize to anyone unless you believe you've done somethig to In a detrimental way. Best Regards fro an o'ld Texan.*

So which one should I get? Easy to install and thin, and I need one that fits a case. I think I will ignore the fingerprint scanning altogether since it has problems with all of them anyway.

I used 1 layer of Black Ice tempered glass and did a pretty good job pushing out the bubbles myself, starting at the bottom & got it perfectly straight. It's stays on with an existing adhesive forever - you don't know it's there. ~>Don't remove the factory film till your ready to operate & don't breathe on it till finished!! Didn't even need the alcohol prep. Don't use that blobby adhesive stuff. Buy the one that specificially matches the phone.

I've never felt the need for a skin or screen protector. I feel validated. Case or no case, but not an applique.

Great Work Man Helping Us To Choose The Good Ones🙏

Just get the Whitestone dome and be done with it. Yes it's exspinsive. But it's absolutely the best on the market. It covers the entire screen and the fingerprint scanner works. I've had one on all my curved phones

I love your hard work on this review. Need lots of patience. I respect you on this dude! Thumbs up man! As for me I have the S20 Ultra, but I didn't use any screen protector or tempered glass. I only bought the original Samsung rugged glossy casing for my S20 Ultra. And it's enough protection for me. Because for Samsung S series their curved glass are not meant for most screen protectors and tempered. Furthermore many rugged cases when you put it onto the phone, the side edges of the case itself will pushed the screen protector or tempered out. I had one incident many years ago when I had my previous Samsung edge put on a tempered glass and when I put my UAG case on it, it pushed my tempered glass right out! I was so disappointed because it's a waste of my money on the tempered glass. So when I bought Samsung S series, I will never put on a screen protector or tempered glass. You can call it "Once Bitten, Twice Shy". Unless I'm using iPhone. Because iPhone have flat screen. Very good for screen protectors and tempered glass. Seriously, Samsung should really stop making curved edge phones. They don't support screen protectors and tempered glass though......

Impressive review, thank you for the dedication. I had some good luck with the LK and a OnePlus 7 Pro 5G with a Spigen Tough Armor. Only a tiny spot would raise on the edge by the alert slider, pretty good for a cheap screens. The screen itself did it's job and I had only used one out of the three provided. I tried to repeat the process with the S20 Ultra today but it didn't work as well and the edges peal away the way you've shown it. Solutions: getting more LK kits for later? Looking for another case? Or getting a Xperia 1 II which has a flat screen. :D

Excellent video but one thing you skipped over(unless I fast forwarded over it) was how they were with screen sensitivity. You mentioned having it on for a few but I have no interest in using my fingerprint so that's irrelevant for me. I'm interested in quality and it seemed the qualification was if the fingerprint worked. That's probably what a majority of people want so I understand that but a little more info about how each one felt during use would be great👍🏻 thanks for doing this because you explained a lot more than other videos out there

Thank you for this video! I really appreciate it

For the uv light using protectors, try to put less glue on it, the bottle it comes with is always too much

I've been using super shield for years and never seen them in a comparison video 🤷‍♂️

I not have seen the complete Video but i have to say that the Spigen protectors are the same as the Skinomi. If correct applied they work really great. I had them on my S8/S9+ and i have the Skinomi now on my Note 10+. You have to do a better job removing all the water when installing. Also it helps to use a hair dryer on day 2 to heat up the edges a little bit . Then they stayed down perfectly even on the edges. Never had to replace it because it did not stick right. And Skinomi offers different sizes. Full phone, Case friendly. . .

Fantastic video, and so helpful! I appreciate also that you showed everything step by step. Thank you for your time! And, no, this video is NOT too long. It's a pity that the results are so frustrating, however...

Wow. Over an hour. I'm in need of a good screen protector so I guess I'll watch this. Thank you

Thanx man. Been looking for a screen protector for my s20 n all the ones I've gotten are either bad or just doesn't fit so thanx for this

the reviews on amazon for your reccomendation "mag glass" are absolutely horrible. im beyond confused. ill just crack my phone ig

you dont do the UV glue installation ones right. u need to over the fingerprint sensor with a microfibre cloth or the packaging of the alcohol wipes, and the cure the surrounding part of the phone so its cured and wont move but the glue on the sensor is still liquid. then take the cloth off and press down where the sensor is to thin out the glue and then cure that spot. the sensor will work then.

Thanks for this amazing comparison!

You the real MVP. Saved me so much time and money. Thanks homie.

I would love to see all the covers for a LG Stylo 6. I just brought one that was "Premium Tempered Glass Protector" I had it on for 3 days I dropped it by accident and I noticed the side was shattered. So looking at it, it looked like my cell had cracked but it was the cover. Now what worries me about the glass covers is will it or can it damage your screen when it breaks?

"Soft explosion-proof memdrane" I don't know what a memdrane is, but it worries me that there is a variety that does explode.

Liked and subscribed because there is a severe lack of effort in reviewing generic screen protectors from amazon. Bloody great video bruv. Edit: also notification bell added