Fantastic idea! No one likes a warm beer!

Very creative and well built, Uncle Knackers. A man will do anything to keep his beer cold, huh?

That’s gold love the colours yellow and black 👍

Keep up the quirky videos , comments , ideas and creations

I can listen to him talk all day.

Great video Uncle Knackers........and on a subject close to my heart too.....!!!!

Those beers look TASTY!

That's another great project from Uncle Knackers!

Great beer cady .Awesome work 👌

I'm just so utterly proud of you, Uncle Knackers, the way you forced yourself to drink that warm beer for the sake of another impressive video! Who needs a stunt man when we have you.... my hero! 😍🤣

Brilliant idea, great joke!!! Perfect channel!!! Cheers!!

What an awesome project!!!👌🏻🍺🍺🍺

That's heaps cool. I like the idea with the masking tape 👍

When you said you noticed one major problem I thought you were going to say you realized you only made room for six beers! Very cool project and it turned out great. Thanks for sharing that!

Mate I can only say that this is the best bloody beer 🍺🍺🍺 caddy I’ve seen because it’s a wonderful project that suits our 🇦🇺🍻drinkers. Dad joke was actually not to bad on this one & I reckon there’ll be many whom make this, super design Knackers 🇦🇺🇦🇺🇦🇺🍻🍻🍻👍👍👍🍺

Nice video,greetings from Davenport Iowa,USA

Love it Unky Knackerbags!!! The only problem is that it only holds 6 beers, where do the other 20 beers go?! hhah love your work mate, this is fantastic and nothing else like it.

Love it!! Never knew I needed this until I saw your video!

What a great project, the peep window is a great idea it makes it a bit unique.

Bloody ripper mate! 👍🏽 And don't you start anything! 🤣🤣🤣🤣 8/10👌🏽

That’s a cooooool project mate 😀

You little ripper 🍻

Pro tip: If you want to avoid tear-out on hard coated chipboard, use a sharp saw, and make sure that the cutting motion is *into* the visible surface. On a circular saw, this means nice side up. With a jigsaw, nice side down. And tape. And if your jigsaw can tilt the blade back to front, activate that feature. Edit: You're showing very good practice to put a sacrificial board under what you're drilling, that prevents tear-out perfectly. Great job! Edit: I truly love your Dad jokes. They add a special touch.

Brilliant work Knackers! Hashtag #ideasman Cheers! 🍺🍺🍺🍺🍺🍺

Warm beer is bad, warm Australian beer is toxic. Hehe... Actually the magnetic bottle top catcher was really cool. Thanks.

Nice project - envious of the bean cans, there they are 398 - wish they were 555. Cheers and stay safe

Heres a tip uncle knackkerrrssss, i would just put the silicone used to seal the inside, on the bottom of the cans, that way they don't pop up and would remain stuck to the bottom, as we say in plumbing "do ya best, silicone the rest" ahahahah

Nice one knackers!

fab idea....must make one for the summer

I got beer thirsty,, wanna try that , too.😄😄😄🇵🇭

Very innovative. Love it!

Another awesome build knackerssssssss

I made several of these a couple of years ago, but yours take the art to another level, perhaps I should update and pinch your ideas. Cheers

Mate thats cool ! I like the cap catchers too, pretty smart :D

Hey shane. In the future I will make one of those that u built.....cool video.👍👍🇨🇦

Genius.

I don't drink beer, but that won't stop me from enjoying this very creative, best beer tote I have seen! Enjoyed the 'Dad joke' as well! Big thumbs up Shane!

Love it!!! Cheers mate!!! 🍻

Shane, Back in October I contacted you about a beer caddy with your twist on it. You said you would try to get one out there. You delivered with flying colors. Not only did you come up with some genius ideas, you made the caddy in Iowa Hawkeye colors. I don't know if that was by design or a coincidence (since I'm from Iowa). Either way, thanks for the build. I plan on making a few of them real soon. Best wishes. Mike

Shane, good onya mate 👍👍👍👍 lets hit the turps soon 😉

Awesome Sauce Knackers ! What a ripper idea and it turned out bloody beautiful mate. It's been a while mate, so i really hope life's been going great for you and you're family Shane, and you're all healthy and happy, and shaping up for a completely ripper chrissy. Good to see you again old mate, and take care of yourself. Cheers

I liked this video before I even watched it. 10/10 would pre-like again!

Now that is a suitable project before Summer comes around again.cheers 🍻👍🦘

Bloody good job Uncle Knackers! And the cap catcher - what a ripper! Love them jokes...........

nice one knackers

Another great video mate 👍🏻🙌🏻

Many little tricks going into that one! Now we just need a slab sized version 😁 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺 🍺🍺🍺🍺🍺🍺

Do not drink any alcohol... but great for other drinks as well... maybe cans, other non alcoholic bottles, or even a 1.25, or two litre caddy? Great tip Uncle Knackers, as always! 😉🇦🇺👍

Three men walked into a bar. You'd think that at least one of them would have seen it.

Great project.

Aussie summer dreams come true !!!! Great tip Uncle K !!! Shared that Dad joke with my brother, he was Shocked!!

Great to see your drinking a brilliant South Australian product... Go the Coopers!!! 👍

Never knew that Bob is my uncle

A bloody bonza project knackers! The rare earth magnets idea is genius. Lovin the channel. Cheers 👍😎🇦🇺

Gudday uncle knackers,I absolutely love watching your videos and the dad jokes are great,,, sometimes. I am a new wood worker although I am 52 years old. Thanks for all the tips and tricks. You should have your own show on tv mate. Sorry about being a pom. Keep it up

Nice drop that Coopers ale

I really really like this. Thanks.

Wow great job matey

Ever in 🇺🇸 mate.. I got a spot for ya... beers always iced! Cheers

Awesome video!

You’re awesome Uncle Knackers 🇦🇺🇦🇺🇦🇺

Yes Knackers! About time bud this one has been simmering nicely for a while, glad you finally got round to making one and a great idea with the cooler! Good job bud

Thank you for sharing Love will win, fear will not - Love fear 💖 than it will never win 🙏

Great project! nice work, love the bottle cap catcher. Oh! and I'll be sure to stay clear from the jumper cables next time I'm in the bar.... 😂🤣👍 Skål! Ron//

I love it!🇦🇺👴🏻

OOOOOOOOOOOOOOOOOOOOOOOOOO NEW GLOVES 😋Obviously didn't help with that Band aid finger 😂😋😂 what a COOL build mate well done Ohhh and flip it over next time ya using a Forstner or spade bit to prevent tear out.

Great build Shane but one problem for me, crappy weather here at the moment so no BBQs, come to think of it when is there any good weather ha ha ha. Still a great build though. Stay Safe Mate, Barry (ENG)

I can confirm what someone else said: I live in England and I never put beer in the fridge. I prefer room temperature beer. When it's cold you can't taste it and can't drink it fast enough! On a VERY hot day I do drink cold beer, but... it's England, I could die of thirst waiting for a hot day! Having said that, it's a great project, which has given me some tips for making other things. The blue tape tips before sawing/drilling are priceless, and the cap catcher has given me a great idea for a new project: a wooden board painted like a dart board, embedded with magnets, at which you throw your beer caps from your arm chair. I'm too lazy to make it so you can have that idea on me! Cheers!

Hello. Very beautiful and high quality workmanship. Fun and instructive video. 👍👍👍

Love a Coopers Ale

What no overpriced Yeti thing. Love the build there knackers.

Bloody Marvellous. Great for this heat wave over East. BTW, I though Knackers was your Uncle. Where did Bob come from LOL

Another great project! As always love your thought and design process as much as the making. Just remember.... "A cold beer...... It's not just for Christmas!!"

Recently started woodworking and came across your channel. I’ve already made a couple things off your channel. Very creative ideas. Looking forward to more

Ohm my goodness Uncle Knackers your current Dad joke is shocking..... However, this project really amped things up and sparked my interest. Love the magnetic cap catcher, but some may find it polarising..... Thanks for another cracking project.

Brilliant

COOOOOL

One thousand likes!

Really nice!

This is a great gift idea. I’m going to make one for my brother in law. Always love your videos! Thank you! 👍😀

Noice...! Taking the beer tote to the next level.

Good one and neat work. You forgot your sticker!! one question. what happens after all that ice melts? wouldn't those cans pop up again?

Top work mate 👍❄🍺 . That joke is still one of my favourites 😄

This is my next project...guaranteed. Thank you for sharing. Just love this!!

Two of my favourite pastimes there Shane.

That's a nice little project! Excellent work! 🍻

Maybe fix the cans to the bottom somehow? Great project and I enjoy your other videos, I built your workbench a few years ago

What a bonza project mate . You could make similar one for tinnies . Bill in uk

Absolutely brilliant. I also love those gloves you were wearing.

Great job, great project. Ran into a problem and solved it swimmingly! I even liked the dad joke. I'd love to have a Cooper's with you.

I've got a few beer drinkers on the Christmas Gift list who are getting these now, thanks for the step by step :)

Love it!!! I've added it to my beer caddy showcase playlist 👍👍

Perfect idea for my best mates birthday in June! Thanks Unk!!

Nicely done (as always) 😁. I don't even drink and I want one 😂🤣. Great dad joke as usual, think I'll use that one.... if we ever see real people again after lockdown that is. Thanks Unk.. keep em coming 😁👍.

Will you be doing a beginners guide to using a table saw in the future? I noticed you had removed the plastic blade guard as seen in this video (something I thought you being the safety conscious fella that you are) wouldn't do when building projects like this or when you used it to help build your farmhouse table (part one)!

you should make one for coke. I dont drink alcohol...never have my whole life, but coke good and cold, thats where it is. I am drug and alcohol free from birth. great video as always. cant wait till the next one.

Top job knackers I love it the magnets are a great touch and that’s just the tip of the iceberg 😝 I’ll get my coat lol

Great project and I love the joke, can't wait to see another!

awesome

I would need to make two of these, one for each hand. 👍