Make sure to watch till the end I show case the Mirka Leros. Aloha
Пікірлер: 174
@contractord35862 жыл бұрын
Did you apply the mud with a brick?
@mariopllumbi37482 ай бұрын
Hahahah he's a KZfaqr not a drywaller 😂😂😂
@stevenpiehl61994 жыл бұрын
I’m thinking you will never knock off those monster edges without tearing the hell out the paper your gonna need a 40 grit to knock down that mess. I can’t see using any mechanical sander without dust collection. Fire the guy that left coat hangers KIDDING. I’ll stay tuned for demo
@suzanneshwaluk48564 жыл бұрын
Hey Thanks so much!!! I am about to buy sander. I appreciate your detailed comments.
@csdrywallhawaii4 жыл бұрын
I got the mirka for 1,100 but one of the guys got it for 700 make sure you use that as bargaining chip if you buy it for your Sherman Williams rep. At least see if they could thrown in the extension pole etc...
@suzanneshwaluk48564 жыл бұрын
@@csdrywallhawaii I'm in Toronto but I will check with Sherwin Williams guy. NB I adore my new drywall skimmer.
@csdrywallhawaii4 жыл бұрын
CSR in Canada 🇨🇦 just started carrying the mirka leros as well.
@petepistachio82293 жыл бұрын
C&S DRYWALL LLC. Hawaii wait!!! Sherman Williams carries the Mirka???
@lofadem7 ай бұрын
I love the hilti sander I think is made by mirka because it looks the same but red
@rozgniatacz_mend5 ай бұрын
yes. it is Mirka product
@davidbahr96123 жыл бұрын
That "yikes" Easter egg in the mud ahaha I'm gonna look into the mirka for an upgrade from porter cables
@csdrywallhawaii3 жыл бұрын
Haha stoked you found it half the guys that watch the vid think I don't know how coat hahaha. kzfaq.info/get/bejne/h71haK9kmc6YZ4E.html
@kennethstby65253 жыл бұрын
Hey, nice video. Just a qiuck tip on the Mirka, u have too place it on the surface and then start it. They have also made some changes to the pad, so reach out to Mirka and they will supply u with the new pad if U havent already got it.
@csdrywallhawaii3 жыл бұрын
Awesome thanks for the advise brother
@devonwesticles3 жыл бұрын
With all power sanders when you place them down while they are turned on, do so while moving across the wall or ceiling as you touch down.... ALWAYS.... turning them on while stationary is not going to give you the best results either.
@mikecase93653 жыл бұрын
Your getting the circle because you are running the sander on the highest revolution. Also you need to sand with a soft pad.
@csdrywallhawaii4 жыл бұрын
Ended up opening all the joints 😂Fast Forward to 8:40 to see the Mirka really shine on regular joint compound.
@danielhud13 жыл бұрын
Looking to get one I'm gonna go with dewalt since I have a lot of good batteries already. Oh and please tell me your guys left that edge so you could show how they can knock down that edge.lol
@csdrywallhawaii3 жыл бұрын
Haha ya that was all me trying to leave it as ugly as possible to knock it down. Here a breakdown of the other sanders I have. Thanks for watching 👀🤙🏽
@georgekarline7764 жыл бұрын
Thanks for the comparison Have you ever worked with a ROKAMAT HERON, too ?
@csdrywallhawaii4 жыл бұрын
No sorry I don't think they have that available here in the states.
@bobseguin21954 жыл бұрын
I told you, that you'd like it, its in a class of it own. I got mine for $960.00 Canadien, about & $700.00 american. He said it was a introduction price. I might be the first person in western Canada that bought one.
@csdrywallhawaii4 жыл бұрын
Thats a fricken steal 😳 awesome! I haven't gotten the vacuum attachments in the mail yet. Plus Alitalia dust in the morning helps wake up up 😂
@lgbfjbsupporter55664 жыл бұрын
where do you buy for the 700 range best price I find is $1100
@bobseguin21954 жыл бұрын
@@lgbfjbsupporter5566 I got a special price, normally a lot more.......
@patrickweaver52904 жыл бұрын
Aaron Fischer check out Atlas machinery in Mississauga Ontario they have the sander and vaccum plus a lot of paper and other accessories for 2300 cad.
@alexhetu62423 жыл бұрын
Are you serius i just pay 2379 for the kit.. look like i pay 1400$ on csr that the better deal i find on can$
@travismarshall78976 ай бұрын
Do you run your box with out a blade? Pretty bad when a power sander doesn’t do anything.
@kennethwilliams77313 жыл бұрын
The edges on those joints looks like Mr Magoo finished them ,without his glasses! Thats some ruff looking joints.
@csdrywallhawaii3 жыл бұрын
Haha yup my experiment went horribly wrong 😂😂
@shazot3 жыл бұрын
Sweet Jesus those joints 😅
@BZ13404 жыл бұрын
A little off topic. How do you test or know your mud is ready for sanding.
@csdrywallhawaii4 жыл бұрын
When fully cured the mud changes colors to more of bright white rather then an off white.
@ginandtonicpro2 жыл бұрын
Key thing about festool is you don’t like the product they take is back no questions asked. Don’t know about the old festool sander but the new one is sweet
@remodelingbytobar1083 жыл бұрын
I have the festool one , but always look the murka tools , the don’t sell in envy store here in NY guess only online?
@csdrywallhawaii3 жыл бұрын
I got mine off my sherman williams rep. Also available online. csrbuilding.com/products/mirka-leros-9-in-drywall-sander-dust-extractor-combo-package-mca-lerosdenet
@pf56582 жыл бұрын
Why so much dust with the Mirka on the last part of the sanding? Did you not use extractor?
@csdrywallhawaii2 жыл бұрын
Yup I did have the adapter for vacuum yet so I used it solo.
@wendycordero96844 жыл бұрын
🔥🔥🔥🔥🔥
@maximun82 жыл бұрын
Why are you sanding if it surface still wet...
@chocolatepuddingpant3 жыл бұрын
have u tryed the new planex with the light?
@csdrywallhawaii3 жыл бұрын
No not yet but it looks super cool.
@csdrywallhawaii3 жыл бұрын
Full updated review of Mirka after 3 months kzfaq.info/get/bejne/etenm9CS1MrOiYE.html
@tylervalerino17813 жыл бұрын
Does the mirka get the inside corners good? The festool has that removable plastic guard, or is it like porta cable were you still have to hand sand inside corners
@csdrywallhawaii3 жыл бұрын
Yes the Mirka get into the corner about the same as the festool with the guard removed we still sponge the corners to get that crisp line.
@dt84602 жыл бұрын
You have to sand corners by hand doesn’t matter what sander you have
@dt84602 жыл бұрын
@@csdrywallhawaii I don’t bother taking off the guard I added a led light around my festool sander so I can’t take the guard off anymore
@harrygirgin90934 жыл бұрын
I was looking forward to this comparison..... damn. Those joints are wacked. Thats just for the demo? Thats not your normal joints right?
@csdrywallhawaii4 жыл бұрын
😂😂😂fast forward to 8:14 in the video 📹.
@igorverdes4 жыл бұрын
Wait till it dries, get the vacuum, get the Mirka sandpaper on Mirka sander and start over.
@csdrywallhawaii4 жыл бұрын
I ended up skimming it, worked out in the end.
@ascno19704 жыл бұрын
its mirka all the way for me , i have the leros, deros & have just received shipment of the new deos delta , will be trying it out shortly & putting up a video on it too , already have 1 on here from a couple of years ago of the leros , i always use with the 1025l l class dust extractor , i cant fault any mirka item i have bought 💪👌
@csdrywallhawaii4 жыл бұрын
Ya that leros is a game changer glad it finally got released here 🇺🇸 .
@intell03 жыл бұрын
i dont think i could manage to fail such horribly with these joints even if you blindfolded me and i was forced to use my mortar trowel:D
@csdrywallhawaii3 жыл бұрын
You can do anything you set your mind to 😂
@Coastal_vibes Жыл бұрын
Who did the drywall? The framers? Good God talk about build up. I'm scared to see the finish product of their level 5 finish
@philipalvarez25613 жыл бұрын
Dude , that's a hell of a messy drywall finish ! You need people who know how to finish , omg !!
@scrixz2623 жыл бұрын
When you bought it was it ready to use and where did you order it
@csdrywallhawaii3 жыл бұрын
Yes I ordered it from my sherman williams Rep.
@patrickweaver52904 жыл бұрын
I see you rocking the CSR shirt I thought your out of the states. Have you seen the new festool sander with the 360 light.
@csdrywallhawaii4 жыл бұрын
Ya I'm here in Hawaii but been ordering a lot from them lately I don't know how they do it but free shipping.
@csdrywallhawaii4 жыл бұрын
I seen it on Instagram a little but couldn't find the original video anywhere online. Looks like it got released in Europe already. Hopefully it doesn't take that look to make it over here the Mirka leros took about 2 years.
@khaledacar38143 жыл бұрын
Is it just me or does the Mirka suck at collecting dust?
@bobseguin21953 жыл бұрын
@@khaledacar3814 I don't think he had vac hooked up, the Mira is the best....
@Shalickx3 жыл бұрын
Do you have much experience with the deros? Been trying to figure out whether the 6” ets or 6” deros is better
@csdrywallhawaii3 жыл бұрын
No sorry I was looking into that as well for sanding patches and smaller areas let me know what u ou find out.🤙🏽
@sigi96693 жыл бұрын
Having watched possibly every KZfaq comparison of the two I'd say the general consensus is that the Mirka wins hands down. BUT, the Deros has (had) some serious reliability issues, which Mirka won't acknowledge. We can only assume they're (or already have) working on fixing that. But since they can't declare having fixed a problem they won't admit existed in the first place I personally don't dare to buy it..
@Shalickx3 жыл бұрын
@@sigi9669 thats the same conclusion I came to. I got the festool. Missing some kinda cool features but seems way more reliable.
@joseangel48213 жыл бұрын
To me any sander can do the job, just need to get used to it, i being tried most of them except this mirka, and the one that makes job better is porter cable with the dewalt self cleaning vac, you need to use a different backing pad than original dough
@csdrywallhawaii3 жыл бұрын
That was my first purchase. I still use the Dewalt vac with all my new sanders. That being said once you use the Mirka especially on ceilings its a huge difference since the head has a 180 degree range. Like you said whatever works best for you is what matters. 🤙🏽
@joseangel48213 жыл бұрын
@@csdrywallhawaii i being using porter cable, but i always want to try or buy the festool, do you recommended? Or do tou think is it better than porter cable? Since you have tried all
@petepistachio82293 жыл бұрын
Jose Angel I have the porter. It’s heavy plus the size of the damn thing. How do you sand a closet or average 5x8 bathroom without banging walls and gouging mud. I switched to the festool Planex just for the simple fact it’s compact. You add extensions for taller ceilings if desired. I’m 6’ so I can do 8’ ceilings with it in shortest length. I never tried festools easy sand. But it looks long. Wouldn’t want it if I had to fit into small closets or powder rooms. I’m digging this Mirka. Love the swivel on the pad against the ceiling. Interesting thing is the planex I bought 5-6 years ago was the same price. I’d buy the Mirka if buying a sander now.
@user-cf1se1kk5x3 жыл бұрын
I still swing a pole sander for a 2 coat level 4 finish and then light check with a sponge. Should i switch over to electric?
@csdrywallhawaii3 жыл бұрын
If sand by yourself majority of the time and electric sander will make a huge difference.
@djrival8193 жыл бұрын
Yes DO IT ! I've been pole sanding for over 2 years with a pole doing houses alone and this machine his magic. Just make sure you get one where the builder had the intelligence to not pu the motor on top of the spinning head.....the Porter Cable at 500$ seems to be the best, most balanced electric sander there his. I have the PowerPro 2100 which I bought for the balance, I prefer the head swivel of the Powerpro 1850 but it skips so what the hell lol.
@johnbarcza5945 Жыл бұрын
Doing final sand with a pole is like working backwards
@ibcrootb3 жыл бұрын
I have used both. Mirka is lighter but the motor has significantly more vibration. The abernet system in good but the hose connection to the leros is bad compared to festool. The bag for the Leros offers very little protection as well. I bought the leros and thankfully was able to return it because the NEW planex is being released shortly in the states, it has lights on the unit! Personally I highly recommend staying away from mirka for this particular tool
@mitchellkasdin18993 жыл бұрын
I was thinking about getting the Festool planex easy. I’m now looking at getting the Mirka Leros. Also Festool is coming out with the regular Planex 2... the updated version of the old planex. Brushless motor etc. I wonder how the Planex 2 compares to the Leros.
@csdrywallhawaii3 жыл бұрын
The Mirkas head maneuverability makes all the difference when it comes to comparing it to others.
@csdrywallhawaii3 жыл бұрын
kzfaq.info/get/bejne/rp6SaLaQ2pzNkY0.html here's the mirka in action.
@mitchellkasdin18993 жыл бұрын
C&S DRYWALL LLC. Hawaii - I just watched it. It collects 98% of the dust on the edge I saw a little plume of Sheetrock dust. I think the double hose helps. It’s highly maneuverable and you stood it straight up and sanded the ceiling. I’m pretty sure the Festool planex would jump and gouge if you tried that.
@stevenpitts39472 жыл бұрын
Looks like you need a brick to sand that setting
@helderdamatta43473 жыл бұрын
Anyone can tell me if I can use planex easy without the vacuum or the mirka. I don’t have the need for the vacuum all the time
@csdrywallhawaii3 жыл бұрын
I am not using any vacuum in this video. 🤙🏽
@stephaniespence69033 жыл бұрын
you should be using Mirk'as Abranet paper with your unit. picks up 96% of the dust.
@csdrywallhawaii3 жыл бұрын
Thanks yup this was right before we got our hose adapter in and the Abranet. Great product night and day difference 👌.
@kiwibird84413 жыл бұрын
Lol he ain't even got it plugged into a vac you muppet
@Campisimike112 жыл бұрын
What grit are ypu using
@csdrywallhawaii2 жыл бұрын
I found the joest yellow pads at 120 or 150 work best.
@bobseguin21954 жыл бұрын
I use mine with dust extractor always, way nicer than dust in face. Ive made the bags reusable, cutting down on costs.
@kyleclemente59394 жыл бұрын
Yup, your a real drywaller. Cheers.
@michaelschnoor75942 жыл бұрын
Made the bags reusable by jeopardizing your health when your emptying them....
@bobseguin21952 жыл бұрын
@@michaelschnoor7594 I wear a mask......
@michaelschnoor75942 жыл бұрын
@@bobseguin2195 maybe just adjust your bid to accommodate a vaccum bag. 5 pack is only 43 bucks. Like I said your jeopardizing your health. That dust gets thru your mask I promise you that Bob.
@joele.77923 жыл бұрын
Memo. Como le haces para que tu lija de full circle pege bien en el mirka? Es yo la acabo de comprar pero no me pega muy bien!
@csdrywallhawaii3 жыл бұрын
Compra el abarnet de mirka dura much mas y va ser el major papel para la espiradora. El joist, full circle y feestool papel de leja no functionan muy bien con el mirka. Pero is lo quieres usar le tienes que quitar el sanding pad.
I'm curious how the Makita works, just cuz it's cordless and the vacuum works with it through blue toothe
@csdrywallhawaii4 жыл бұрын
I sampled the makita at woodworks but I couldn't get over how heavy it feels and the battery average about 30 min run time.
@csdrywallhawaii4 жыл бұрын
Also vacuum works via Bluetooth on the Mirka as well but haven't gotten the attachment in the mail yet.
@jimgill75244 жыл бұрын
Kool , thanks for the reply me buddee
@lgbfjbsupporter55664 жыл бұрын
I dont understand the appeal of cordless drywall sander... No matter what you still have the vac hose so you are still not "cordless" unless you are not using dust collection and thats no good. Plus it adds the extra weight of the battery. Every ounce counts by the end of the day. Lightweight, maneuverability, no gouging, and good dust collecting is the name of the game with drywall sanders. Not sure what took so long for someone to develop it but it looks like Mirka knocked it out of the park.
@jimgill75244 жыл бұрын
@@lgbfjbsupporter5566 I agree with you a 100% me buddee, the appeal to me is the lack of plug ins in a lot of the new home projects but not at the expense of extra weight or the finish job the sander can pull off
@ElDrKaiser3 жыл бұрын
can you please tell me where you got the mirka? i can't find a 120v one
@csdrywallhawaii3 жыл бұрын
csrbuilding.com/products/mirka-leros-9-in-drywall-sander-dust-extractor-combo-package-mca-lerosdenet Or @sherman Williams.
@ElDrKaiser3 жыл бұрын
Thank you sir
@ElDrKaiser3 жыл бұрын
@@csdrywallhawaii i just uploaded a video of the mirka removing texture. Go check it out
@floydthebarber99563 жыл бұрын
Level 5?? Thaat looks like Level -10 and 1/2.
@haraldsviskers76943 жыл бұрын
Looks like this gays first day on the building site. What a mess! :D
@csdrywallhawaii3 жыл бұрын
*guys 😂🤙🏽
@losttheplot266 ай бұрын
Slow them down. No need run at 10 thousand RPM.
@LuisFlores-tu1it4 жыл бұрын
But does it leave circles
@bobseguin21954 жыл бұрын
Nope
@csdrywallhawaii4 жыл бұрын
Fast forward to the end like I mentioned above. I hold it on the wall to show.
@tavicher87193 жыл бұрын
are you for real? you need a grinder to attack those joints! Fire the guy that put that mud down. yikes!
@csdrywallhawaii3 жыл бұрын
Hahaha its funny cuz I coated it as ugly as possible and wrote yikes in the mud myself. I was planning on showing how much mud the sanders can take off but the hot mud didn't dry.
@tavicher87193 жыл бұрын
For the record... The mirka paired with my makita dust extractor is the best money I've spend in my 20 plus years in the Reno business.
@luxostucco2772 Жыл бұрын
80 grit might help.
@jonathanmota25483 жыл бұрын
Why sand 1 hand screws
@csdrywallhawaii3 жыл бұрын
We sand in between coats to ensure the next coat has something flat to build off of.
@MB-to5gl3 жыл бұрын
No vacuum? Dust must be crazy...
@csdrywallhawaii3 жыл бұрын
I was waiting on the adapter but it came in. kzfaq.info/get/bejne/rp6SaLaQ2pzNkY0.html
@jonnyesper66983 жыл бұрын
I think he needs a grinder for that wall... damm😒
@csdrywallhawaii3 жыл бұрын
Hahah yup chiseled it off with a stiff knife and hammer. Ended up skimming that bath so it worked out .
@agent7agent7593 жыл бұрын
Holy smokes you need sds jackhammer to knock the edges , I bet mirka is the best drywall sander on the market but not for that type of joints 😂 😂
@csdrywallhawaii3 жыл бұрын
Yup my experiment failed horribly.
@agent7agent7593 жыл бұрын
@@csdrywallhawaii would've been nice to demonstrate the sanding of nice skimmed edges and zoom up close so the audience could see the results, thank you for your time of making these videos 👍
@rogermorin85513 жыл бұрын
100 grit? Yikes. How about not leaving any edges… You know like hand tapers
@MrPoisonedcookies2 жыл бұрын
I assume that he left the edges for demonstration maybe ?
@johnbarcza5945 Жыл бұрын
Hand taping is like working backwards
@jvnguyenle13853 жыл бұрын
no sander cant sand ur work
@blt981 Жыл бұрын
Why no vacume bro
@csdrywallhawaii Жыл бұрын
Didn't have the adapter for the house yet
@blt981 Жыл бұрын
Brother where should I buy my sander and vacuumed. I’m a little contractor now retired doing lots of work to make my old lady happy. I don’t know if I should get festool
@csdrywallhawaii Жыл бұрын
Reach out to your local hilti rep and see if you could get a to sample there new sander it's just like the Mirka but better warranty.
@csdrywallhawaii Жыл бұрын
kzfaq.info/get/bejne/htyHaJyi17DGpHk.html
@sherryspectre2174 жыл бұрын
It's called an Orbital Sander. Just saying....
@csdrywallhawaii4 жыл бұрын
Half the stuff I mean to say doesn't make it😂. One and done. Got to get back to work.
@clevername47813 жыл бұрын
That poor room....
@csdrywallhawaii3 жыл бұрын
Haha ya had to scrap and skim in the end it worked out.
@clevername47813 жыл бұрын
@@csdrywallhawaii good deal
@csdrywallhawaii3 жыл бұрын
kzfaq.info/get/bejne/rp6SaLaQ2pzNkY0.html The MIRKA IN ACTION!!!!
@robelveru80354 жыл бұрын
I thought the same thing about the festool. I was so disappointed in my festool after i bought it. I only break it out for removing popcorn. Its way over priced at $750 and just destroys my joints. My wen sander does 10 times better job then the festool and only costed $125.
@csdrywallhawaii4 жыл бұрын
Ya the festool is only a little better then some of the off brands. Is is a couple hundred bucks better 🤷♂️
@mitchellkasdin18993 жыл бұрын
I have the Wen sander $125. I think I’ll keep that as my popcorn sander after I’ve done a 1pass scrape on the popcorn ceiling.
@onehandclapping30943 жыл бұрын
With a taping job like that you’ll need a diamond grinder. My suggestion... get a better taper
@albertparra51544 жыл бұрын
A professional dose very little sanding, if any.lookslike to much work .
@csdrywallhawaii4 жыл бұрын
You should show case your talents in the Olympics we got going on now.
@juanvillanueva43453 жыл бұрын
what a mess bro
@csdrywallhawaii3 жыл бұрын
That was the plan. To show case what the electric sanders can knock down.
@Campisimike112 жыл бұрын
I did thay wet 2 times in a row once all good bro
@djrival8193 жыл бұрын
150 paper grit for any house...all the way till the end....does perfect jobs.......and stop using the machine on max speed you wont get circles....use it on lowest speed with 150 and walk with it and its a 1 pass. Also, people with level 5 sanding jobs dont take those kinda jobs anymore...what are you doing there ? hahaha
@tranderrick2 жыл бұрын
dam man, that is the worst mudding job i ever seen.
@michael10843 жыл бұрын
Jesus....hack job.
@onehandclapping30943 жыл бұрын
I’m sorry. That taping job is total shit
@michaelschnoor75942 жыл бұрын
Man maybe learn how to lay the mud so you don't have to sand so much. Those edges and cliff hangers my man!!
@csdrywallhawaii2 жыл бұрын
kzfaq.info/get/bejne/f5p6qqmJtsy-YWw.html Heres a real review that was more like a fail experiment. If you look closely I purposely wrote
@adrianofelix41893 жыл бұрын
Horrible first coat, what a crap.
@user-lg4cx1dp1r3 жыл бұрын
Why post this video? Waste of time. Who cakes on mud like that?
@csdrywallhawaii3 жыл бұрын
Thanks for watching 🤙🏽
@ginandtonicpro2 жыл бұрын
So he uses two sanders then comments the muds still moist. Using highest setting only. Barely uses the Mirka and says it’s his preferred unit. Didn’t have sand paper holes aligned with the base. Dust everywhere. Sorry, is he a plumber by trade? Mirka may be good but no way is it better than festool
@csdrywallhawaii2 жыл бұрын
kzfaq.info/get/bejne/h71haK9kmc6YZ4E.html
@rozgniatacz_mend5 ай бұрын
Mirka is much better
@manfredasmoncys12903 жыл бұрын
At first u need to learn sparkling corect!
@johnbarcza5945 Жыл бұрын
First of all, I think you meant spackling. Which spackling compound is special purpose compound meant to be used to fill dents and dings on primed or painted surfaces. For that purpose, nothing works better. I always recommend Red Devil one time brand. Best on the market. In most cases spackling compound is only used by painters. Works WAY BETTER than regular compound on painted or primed surfaces. Trust me, I have been a practicing drywall hanger/ finisher for 39 yrs. So in other words…You may want to learn the trade, before you throw advice out there. Especially when it comes to drywall. Hands on is the ONLY WAY this trade is learned. WORD