Tim, I switched out my handlebar stem and riser to: FOMTOR 31.8 Adjustable Stem 0~90 Degree 80mm MTB Adjustable Bike Stem for 31.8mm(1.25") Handlebar Mountain Bike, E-Bike. both riser and adjustable stem in one unit. Works Great! Bought it on Amazon...
@TinkeringTurtle3 жыл бұрын
Very nice!
@paulshaar41872 жыл бұрын
Tim, that eBike hoist you and your wife have is a space saver for sure, you guys have got talent you haven't even thought about using friend. You are amazing with what you can do with your analytical mind and talented working hands, you are Blessed. Thank you for always answering my questions too.
@TinkeringTurtle2 жыл бұрын
Those are very kind words, thank you! I’m very glad the info is helpful!
@itsaboutsuccess3 жыл бұрын
I appreciate your down-to-earth practical advice and presentation. Each accessory you showed is good guidance for what we need with our ebikes, even if we select different parts. Thanks Tim!
@TinkeringTurtle3 жыл бұрын
I appreciate that! Just an FYI, I have withdrawn my support for the Lixada pannier bag. Less than a year in and the sewn seams on the bag are failing. To that end I have removed the link for that component from the description of the video.
@itsaboutsuccess3 жыл бұрын
@@TinkeringTurtle Fair assessment. The only way to know if an accessory has longevity is to use it. U da man!
@Xtrafix2015 Жыл бұрын
Great tips! I just bought a himiway and need to upgrade it thank you!
@TinkeringTurtle Жыл бұрын
Glad it was helpful!
@kalasag91133 жыл бұрын
'love the thought-process you've put into this video, Tim. I think I'll setup my garage with a pulley system similar to yours for when I need to troubleshoot the bike. My existing bike -repair stand is not built for the Himiway's weight. LOL! For future contents, I would love to hear/watch your ideas around extending the battery's longevity (for 30+ miles riding) via a spare battery or slaved charger. Thanks very much!
@TinkeringTurtle3 жыл бұрын
Thank you! Interesting idea for a video. Just an FYI for you, on our cruiser and stepthru we set the PAS low and the gear as high as we can stand. If we run around 15 mph we have ridden 45 miles, switched batteries midway, and had battery bars to spare when we finished. Enjoy the ride!
@larryseagraves93633 жыл бұрын
You have helped a lot of people with your videos. I know this takes a lot of effort on your part. I just wanted to say thank you very much.
@TinkeringTurtle3 жыл бұрын
I appreciate that! Always glad to help.
@rexhargrove51723 жыл бұрын
Extremely helpful video. Thank you so much for uploading. I’m also a heavier/taller rider and I really appreciate the mods you’ve made to make the bike more comfortable.
@TinkeringTurtle3 жыл бұрын
Glad to help! Enjoy the ride!
@davidsnyder23173 жыл бұрын
TT - Thanks for this video. Outstanding. My new Himiway arrived two days ago and I'm already looking for doing some upgrades. Like you, I'm a bigger rider, 250 6'3". My wife's Himiway should be here at the end of August. We also live in Michigan and looking forward to riding during the winter months as well. We are in Milford and looking to try many of the rail to trails in SE Michigan.
@TinkeringTurtle3 жыл бұрын
Glad I could help!
@terimcmichael43113 жыл бұрын
Excellent video! We are new owners of Himiways and there is a lot we don't know Very helpful!!
@TinkeringTurtle3 жыл бұрын
Nice! Glad it was helpful!
@darrinjones60932 жыл бұрын
Randomly stubled on this, just purchased the Himiway Cobra (still about a month away from delivery) and these are some great universal upgrades, especially for us big and tall guys.
@TinkeringTurtle2 жыл бұрын
Glad you like them! The Cobra looks nice!
@josephleonard8813 жыл бұрын
I just purchased a Himiway ebike and your videos are a big help. Thank you!
@TinkeringTurtle3 жыл бұрын
Glad to help!
@jeffreykurtz78433 жыл бұрын
Thank You ! You are the Man ! Watch all your video's and learn ! Thank again !
@TinkeringTurtle3 жыл бұрын
You are welcome!
@tomgonzales31053 жыл бұрын
Nice job on the accessories. I ordered several of those items for my Himiway. I’m hoping I can adjust the suntour post low enough for me. Great video, thanks!
@TinkeringTurtle3 жыл бұрын
Fingers crossed! Good luck!
@juliusgregorio41113 жыл бұрын
I really enjoy your videos, they're very informative and helpful. Thank you and keep up the great work, looking forward to watching more!
@TinkeringTurtle3 жыл бұрын
Awesome, thank you!
@bookooc56053 жыл бұрын
Your channel is a big help. My Himiway will be here this Thursday. Can't wait!
@TinkeringTurtle3 жыл бұрын
Hope you enjoy it! I am so very glad I can help. Enjoy the ride!
@mikethoraval2850 Жыл бұрын
Mr Turtle you make fantastic videos ...EH!
@TinkeringTurtle Жыл бұрын
Thank you kindly!
@markrusso31173 жыл бұрын
Thank you for your vids on the Himi. Very Himi-ful of you.
@TinkeringTurtle3 жыл бұрын
Glad you like them, my pleasure!
@RBallem1 Жыл бұрын
Hello, I have just purchased your Himiway model and have Tannus liners on the way. We are the same size and weight and I would like to know the tire pressures you settled on. You have done a fine job with your videos and the information has been a great aid. Thank you.
@TinkeringTurtle Жыл бұрын
I run 25psi on paved paths (conventional wisdom is 20psi pavement, 15-20psi for dirt, 7-10psi for sand.)
@kabzak3 жыл бұрын
Enjoyed the video. Lots of good and useful information you shared. Thank you for posting.
@TinkeringTurtle3 жыл бұрын
My pleasure!
@lovingyou15013 жыл бұрын
So appreciating you TT💯👍🏽👌🏽
@TinkeringTurtle3 жыл бұрын
My pleasure, thanks for watching!
@Busdathead3 жыл бұрын
Great Detail Thanks for all the info
@TinkeringTurtle3 жыл бұрын
Glad it was helpful!
@carlcarlson72533 жыл бұрын
I have a Himiway Cruiser step-through coming so your videos are Great!
@TinkeringTurtle3 жыл бұрын
Thanks, I’m glad the helped!
@rubysmith39476 ай бұрын
fabulous😍😍😍
@TinkeringTurtle6 ай бұрын
I appreciate it!
@ChrisJohnson-zr3ms3 жыл бұрын
Hey Tim, I saw you on a Moinyonon Fashion fork stem extender commercial!
@TinkeringTurtle3 жыл бұрын
They must have clipped my KZfaq then. I didn’t give anyone permission…😕
@TimDuncklee3 жыл бұрын
Several of your links are no longer available. Interested in updating them? Great video!! Thank you for doing this.
@TinkeringTurtle3 жыл бұрын
I’ll take a look at it when I get a little time later, thank you!
@TinkeringTurtle3 жыл бұрын
I have them updated with comparable listings. thanks for the feedback!
@TimDuncklee3 жыл бұрын
@@TinkeringTurtle Thank you! My bike is on order and am anxious to make many of the changes you did as soon as it comes in.
@danielweeks37232 жыл бұрын
The Tannus inserts are great and..........You can ride a flat tire with them.
@TinkeringTurtle2 жыл бұрын
Then you had a VERY different experience than I did. As soon as my wife got a flat the bead popped off the rim and the back tire would not roll without binding up. They may be able to ride on a thin tire, but not with fat tires. It simply didn’t work.
@danielweeks37232 жыл бұрын
@@TinkeringTurtle I was only going on the claim of riding with no air. Haven't tested that yet and that is disappointing. Gonna start taking a spare tube again assuming I get it operational again.
@TinkeringTurtle2 жыл бұрын
I definitely carry a patch kit when I ride.
@paulh48663 жыл бұрын
Awesome Video!! Thank you!
@TinkeringTurtle3 жыл бұрын
Glad you liked it!
@cotilynn3 жыл бұрын
Nice info! Thank you!
@TinkeringTurtle3 жыл бұрын
Your welcome!
@alexanderengstrom82844 ай бұрын
Great video, super helpful! Please lower the music volume lol
@TinkeringTurtle4 ай бұрын
Thank you!
@robertparks36663 жыл бұрын
Great information and I have ordered some of these accessories. I may add more once I get these installed. As of 2-7-2021, The thumb controls are out of stock.
@TinkeringTurtle3 жыл бұрын
Glad it was helpful! Even my alternative link for the thumb throttle is sold out. I’m sure they will be restocked soon. Enjoy the ride!
@TinkeringTurtle3 жыл бұрын
I found another throttle listing if you still need one. amzn.to/36Ruqh1
@robertparks36663 жыл бұрын
@@TinkeringTurtle Thank you, it looks like that one will work. I will get it ordered. Thanks for all of your informative videos.
@MrDkgio Жыл бұрын
Pedals have never come loose on a bicycle ever… so unless you change your pedals mid ride… Flat out tyre sealant is way cheaper than the inserts, with the added bonus of no punctures, check out area 13 video on flat out…
@TinkeringTurtle Жыл бұрын
thanks for the feedback…
@enquezproductions3 жыл бұрын
Another great video!
@TinkeringTurtle3 жыл бұрын
Glad you enjoyed it!
@lovedog-charlie21953 жыл бұрын
Did you get a flat while using the Tannus insert? I would be interested in hearing that story, Keep it up, GOOD JOB.
@TinkeringTurtle3 жыл бұрын
Yes we did. My wife picked up an inch and a half long nail passing by an industrial park. Buried I. the tire all the way to the head. Neither Tuffy or Tannus would have prevented the flat. Slime or Flatout might have made a difference, but we haven’t put either of those in. We may in the future, but we haven’t yet. I did a couple of posts on the flat at the time in the Facebook group. “Himiway Motorbike owners club” (if you want to search them out and get more info.
@wanderlustwheels48703 жыл бұрын
Enjoying your Himiway videos and looking forward to more. Can you tell me if your regular frame bike and your wife's step through use the same battery. We are considering two bikes like yours , and wonder if we could swap the batteries at the mid point of a ride if one rider was using quite a bit more battery assist than the other. Thank you.
@TinkeringTurtle3 жыл бұрын
Yes, the batteries are interchangeable. My wife and I swap batteries on are longer rides to even out usage as I am significantly heavier than she is and she uses way less power. One note is the keys are unique to the battery cradle (bike) but the batteries will fit in either cradle...if that makes sense. Enjoy the ride!
@wanderlustwheels48703 жыл бұрын
@@TinkeringTurtle Thank you
@MiguelVM3603 жыл бұрын
Thanks for sharing,
@TinkeringTurtle3 жыл бұрын
My pleasure
@billhutton95496 ай бұрын
👍
@TinkeringTurtle6 ай бұрын
thx
@treverjenkins70806 ай бұрын
👏Ace
@TinkeringTurtle6 ай бұрын
Thanks
@TK-qu1ht3 жыл бұрын
Thanx for the link re: hoist system! Very helpful!! Do you have the rear straps for sale? BTW... I have your battery covers and the work perfectly and add a touch of class to the bikes when on our carrier 😎.
@TinkeringTurtle3 жыл бұрын
I don't, the’re just a 1” strap 32” long with a d-link sewed into both ends. Hope this helps.
@garymartin16923 жыл бұрын
What size seat post do you need for a Himiway cruiser?
@TinkeringTurtle3 жыл бұрын
I purchased the 27.2mm seat post and added a shim to bring it up to 30.4mm Shim - amzn.to/2IXB3W4
@chrisschwersenska16703 жыл бұрын
Great reviews! Have you found a decent hitch hauler bike rack for 2 yet? Were over in WI and just bought 2 of these. Thanks in advance!
@TinkeringTurtle3 жыл бұрын
Thanks. Unfortunately I don’t use a bike rack, I load the bikes in my truck for transport. Sorry I couldn’t be more helpful. You might check out the Himiway Facebook groups. I’m sure you can find recommendations there.
@dougr69253 жыл бұрын
Where did you use the 15 MM wrench....you are my go to guy for everything Himiway....thanks for helping me out....!!!
@TinkeringTurtle3 жыл бұрын
All the links are in the description of the video. But here is the link for you! amzn.to/2VsFQBM
@SpaceCommanderSpiff3 жыл бұрын
Been watching all your videos, as I recently received my Himiway. Even ordered the terminal covers. Thanks for being a great resource. I do have a question though, do you have a different bag recommendation if you no longer recommend the "Lixada Bike Rear Bag Bicycle Pannier Bag Saddle Bag 25L"?
@TinkeringTurtle3 жыл бұрын
Glad you like the videos! I replaced the “Lixada” bag with the “Rockbros” a few months ago. It’s much more expensive, but so far it is holding up extremely well. I like it! Rockbros pannier bag link: amzn.to/3kwcqiD
@jimstahl44032 жыл бұрын
Hi Tim, outstanding incite into the bike. I've added a lot of your recommendations and all work great. My big mess up was I added some cheap semi hydraulic disk brakes...they are a lot quieter and smoother, but very little stopping power, almost dangerously little stopping. I can plan ahead to slow down, but yesterday when a bear zipped in front of me, I couldn't even lock the wheels or rapidly slow down! Luckily he was on a mission and just kept going. What's your best advice for upgrading the brakes...such a huge price jump from the $40 to the $140 semi hydro brakes. Thanks for any input, for know I think I'll go back to the noisy mechanical brakes. An 80lb bike with a 225lb rider zooming down a mountain trail is scary!
@TinkeringTurtle2 жыл бұрын
Hi Jim, to your brake question. I have not done the upgrade, my bike paths are pretty flat and I haven’t needed the extra stopping power. But from what I have read, the people that seem to be happy with their brakes are the ones that purchased from Bolton ebikes. They are the Juintech M1 hydraulic calipers…$149. I may consider upgrading one of my bikes down the road to test them out, but I am not certain when that will be.
@nmene48523 жыл бұрын
Lots of good and useful information, thanks you for that, I do not have my Cruiser yet, I like to order a Seat Post Suspension just wonder if 30.0mm will work?
@TinkeringTurtle3 жыл бұрын
Glad it was helpful! The stock seat post size for the cruiser and stepthru is 30.4mm. Most people can’t find a suspension seat post in that size, so they purchase the 27.2mm and add a 27.2mm to 30.4mm seat post shim.
@gregorynp3 жыл бұрын
Great video! I would like a car bike rack . Don't want a hitch. Has to incorporate a trunk.
@TinkeringTurtle3 жыл бұрын
I am not sure how to respond to that...?
@gregorynp3 жыл бұрын
@@TinkeringTurtle This type: www.amazon.com/Allen-Sports-Deluxe-2-Bike-Trunk/dp/B00TRTSAZM/ref=sr_1_3?crid=308FMYYLM2P61&dchild=1&keywords=bike+rack+for+car&qid=1610971803&sprefix=bike+rack+%2Caps%2C189&sr=8-3
@TinkeringTurtle3 жыл бұрын
Looks good, let us know how it works with the heavier bikes!
@gregorynp3 жыл бұрын
@@TinkeringTurtle The manufacturer said they do not have a rack for my model car.
@robertfoley4235Ай бұрын
how do you change calibers on tektro brakes
@TinkeringTurtleАй бұрын
I am not exactly sure what you are asking. If you are referring to replacing worn brake pads with Tektro calipers, then check out this video: kzfaq.info/get/bejne/oNScnaSqnMmwqXk.html
@danielweeks37232 жыл бұрын
Hey Turtleman and anyone else that has an opinion about this. Hopefully my H Cruiser just came with a few bad parts, but I'm starting to woder if maybe my bike doesn't do that well in hilly areas which is what I bought it for.
@TinkeringTurtle2 жыл бұрын
Can you give us a little info, how much do you weigh? Do you pedal or just throttle up the hills? Do you gear down to help the motor as you climb the hill?
@rainmakr202 жыл бұрын
Great video. Can I ask I am about your size and I was wondering how many miles you get on 1 battery charge with normal riding. Thanks for the great content.
@TinkeringTurtle2 жыл бұрын
I am 6’ 3” tall and around 300lbs. My wife and I have done a 45 mile trip where we switched batteries at the half way point. At the end we had one or two bars left. For most of that ride we were going around 15 mph. check out the video here: kzfaq.info/get/bejne/jJt4qbqX3rfIaWg.html
@davidsnyder23173 жыл бұрын
Tim, love your videos and have done many of the upgrades you recommend on mine and wife's Himiway bikes. Question, Suntour NCX suspension seat post 27.2mm (requires shim to fit Himiway) what shim size is required to fit the Himiway? Thanks
@TinkeringTurtle3 жыл бұрын
You will need a 27.2mm to 30.4mm shim. This is the one I used. amzn.to/2IXB3W4
@davidsnyder23173 жыл бұрын
@@TinkeringTurtle Thanks
@efieldsiii3 жыл бұрын
I just ordered the black and white models for my wife and I , Where did you obtain the strap material that is used with the D Hook on the strap and was it just sewn straight across past the D hook. Can you also provide the length of the stapping material and size of the D Hook. Your many videos I have watched were very helpful as I narrowed down my choice for the ebikes.
@TinkeringTurtle3 жыл бұрын
Hi Edward, Thank you for your kind words! The length of the finished strap was around 32” I used 1” nylon strapping that I purchased off of Amazon amzn.to/3ngt5qr And the D-links are also 1” amzn.to/37cZ59c She sewed the end of the strap with an X and a box around the X. So much more than just a line. We didn’t want the bikes coming down on us or our car.
@efieldsiii3 жыл бұрын
@@TinkeringTurtle I have my old bike mounted on the ceiling with hooks I have to manually lift and put in place but with these bikes heavier than the standard bike, I like the cable lift system which I will mount to my ceiling like you did, Thanks will keep watching for tips since my bikes will not be delivered to January 2021 I have to adjust the speed down like for the Pedal Assist you presented in another video so the bike does not take off on my wife
@laurenthoraval4446 Жыл бұрын
Hi there .....will your thumb throttle replacement work on a Himiway Zebra?
@TinkeringTurtle Жыл бұрын
Most likely yes. But I do not have any of the newer Himiway ebikes to verify that. Find the connector for the twist throttle on your bike and pull it straight apart, do not twist. Then verify that the connector is the same as shown on my video. Is it male? does it have 2 pins? etc. Make sure to properly line up the connector and push it straight back together. I hope this helps!
@laurenthoraval4446 Жыл бұрын
@@TinkeringTurtle Thanks alot, will let you know how it works out...appreciate your input....
@patkuykendall69173 жыл бұрын
Thanks again for the info 👍👍still waiting for my himiway to ship. wife's rad mini step thru was here in less than a week caint wait to get riding do u think the tire inserts work well to prevent flats sence you all put them in. Thanks
@TinkeringTurtle3 жыл бұрын
Hi Pat, since we installed the Tannus liners in our bikes we have rode approx. 1400 miles each. We have had a grand total of one flat. My wife picked up an inch and a half nail in her rear tire. Meanwhile we have hit innumerable amounts of bike path debris that made loud noises as they pressed into the fat tire and pinch/bounced away causing no harm. We are happy we spent the money, if nothing else it gives us peace of mind. Thanks for the question, be sure to subscribe for future videos!
@robpasma5673 жыл бұрын
Definitely choose to go with inserts. On my second ride before Tannus a small thin chard of glass was all it took to create a flat. Since then I have confidence that those loud pops like Tinkering Turtle mentioned below won't leave me on the side of the path.
@genebenson7183 жыл бұрын
Great video. You wouldnt happen to know how to reduce the speed of pa 1 to 5 mph vs 10. 10 is just too fast for off road.
@TinkeringTurtle3 жыл бұрын
The only way to reduce speed in any of the PAS levels, is to change the %. And if I remember correctly the lowest you can go in PAS 1 is 20%. I am not certain what that equates to in actual speed.
@efieldsiii3 жыл бұрын
Hi Tim, I ordered the strapping and d rings, but do you have a closeup of the pattern your wife sewed on the strap to secure it to the d ring, I am trying to gauge how much of the strap overlaps the dring for strength . We sewed up some sling chair replacements this summer so I know her sewing maching will go through the strapping
@TinkeringTurtle3 жыл бұрын
KZfaq doesn’t let you post images. But the overlap is about 1 1/2” long and the pattern is a rectangle with an X going from corner to corner. Hope this helps.
@efieldsiii3 жыл бұрын
@@TinkeringTurtle Thanks again
@EricTobiasPhotography3 жыл бұрын
Nice Videos! do you have bike rack that you are using on your vehicle for your bike? if so, which one are you using?
@TinkeringTurtle3 жыл бұрын
I have a full size pick up. I just strap them in the back of the truck. You might search thru the Facebook groups, lots of info there.
@murph553 жыл бұрын
nice video, would be better if you gave the price of the items as you show them
@TinkeringTurtle3 жыл бұрын
Prices and availability vary over time. You can get the current prices by visiting the links in the description.
@Powerstroke983 жыл бұрын
Tim, I'm wondering if you could add a short video, or portion thereof, on changing the front 'quick disconnect' to one of the 'skewers' so that it's not so easy for someone to steal the front wheel? I see them online, but I'm unsure of the correct length, and/or if one would be a better choice than another? Thank-you!
@TinkeringTurtle3 жыл бұрын
I will put on the list of videos I might do! Thanks!
@milan992242013 жыл бұрын
I'm actually looking for that too and just posted about the size.
@bobjohnsoon62953 жыл бұрын
Hi Turtle! Thanks for all the great info. I ordered the 18mm parktool wrench but it only fits on the left side. Its to small for the motor side. Did you find this to be the same on yours.?
@TinkeringTurtle3 жыл бұрын
oh man! Your right you need a 19mm for the motor side. I just assumed both side were the same. I just ordered the 19mm for my bag and I will update the description in the video and post to the Facebook groups. Nice catch! Here is the link for the 19mm wrench. amzn.to/3r8kZTa
@bobjohnsoon62953 жыл бұрын
@@TinkeringTurtle lol I just ordered one too!
@gswilder3 жыл бұрын
"Mr Turtle" - what size spoke wrench do I need for my HImiway Cruiser? The one on the included multi-tool (14?) doesn't seem to fit. Thanks in advance.. love your videos
@TinkeringTurtle3 жыл бұрын
Sorry Gregory, I don’t know. I have never messed with the spokes.
@gswilder3 жыл бұрын
@@TinkeringTurtle Thanks for the reply. Keep the great Himiway videos coming.....
@bluefieldpride3 жыл бұрын
Thanks for this info! Much appreciated. I have one question regarding your wife’s bike seat/suspension upgrade....How much difference is there between the original lowest seat height vs. with the upgrade? I’m interested in the same changes to my Himi ST, but am vertically challenged and can’t afford too much increase in seat height. 🙂
@TinkeringTurtle3 жыл бұрын
I would guess about two inches. For reference my wife is 5’ 6” tall.
@knowone6214 Жыл бұрын
some of your amazon links don't work
@TinkeringTurtle Жыл бұрын
Thanks for the heads up! I went thru and updated them this morning, should be good to go.
@franksglock3 жыл бұрын
I have a question about the Tannus Armour Bundle with or without Tubes for the Himiway Escape is the 20x4.1-4.8 the right size for the Escape. I will purchase with the tubes
@TinkeringTurtle3 жыл бұрын
That is the correct size. On our cruiser and stepthru I spoke with Tannus support and they indicated that with fat tires, it is not as critical to get the smaller tubes. The stock tubes work just fine. I am assuming that the same should hold true for the Escape fat tires. I hope this helps!
@franksglock3 жыл бұрын
@@TinkeringTurtle Thank you so much for your speedy reply. Your videos are so very helpful. I have one Escape and One Cruiser coming soon 4 weeks have gone by already. Thanks
@dougr69253 жыл бұрын
Tinkering.....have you found an alternative kickstand to the one supplied on bike....thanks.
@TinkeringTurtle3 жыл бұрын
Sure, if you search Amazon for a “40mm kickstand” you will find many options. Here is one that has good reviews. amzn.to/3C6h1ii
@dougr69253 жыл бұрын
@@TinkeringTurtle thank you very much for the help
@mikethoraval2850 Жыл бұрын
Good Morn..the e bike thumb throttle control on your video, will it work on the zebra model with the updated motor they are selling for 2022?
@TinkeringTurtle Жыл бұрын
Most likely yes. But I do not have any of the newer Himiway ebikes to verify that. Find the connector for the twist throttle on your bike and pull it straight apart, do not twist. Then verify that the connector is the same as shown on my video. Is it male? does it have 2 pins? etc. Make sure to properly line up the connector and push it straight back together. I hope this helps!
@mikethoraval2850 Жыл бұрын
@@TinkeringTurtle thanks for your reply..keep up the good work..love your videos
@jerrydratva253 жыл бұрын
What size shim do I need to install it on Himiway all terrain ebike?
@TinkeringTurtle3 жыл бұрын
The Link is in the description of the video. Assuming you bought the 27.2mm suspension seat post, the size is 27.2mm-30.4mm for the shim.
@ericlevendusky67693 жыл бұрын
What are your thoughts on the amount of surface area between the front forks and the axle hubs coming through the front wheel? Seems to be only a quarter inch of contact not very much.
@TinkeringTurtle3 жыл бұрын
While I am not precisely sure of what your asking...I think you want to know if I am comfortable with the front tire interface with the forks. The answer is yes. I have over 1400 miles on my bike. Paved bike paths, dirt trails, jumping curbs... no problems or concerns. Hope this helps. Enjoy the ride!
@irishfour43 жыл бұрын
Great video! I am having a problem and someone suggested that I ask you. I have had my bike about 2 months and had not had ay problems until recently. When I tried to charge the battery the last time the charger light stays green and does not charge. I am attempting to charge in the house, off of the bike. Any suggestions?
@TinkeringTurtle3 жыл бұрын
Sorry to hear that. The issue is likely either in the charger or the circuitry of the battery. Neither of which I am well versed in. My best, and only, suggestion is to reach out to Himiway support and get troubleshooting tips from them. Sorry I could not be more helpful.
@larrymalmstrom16833 жыл бұрын
I am wondering why you bought a 27.2 seat post and a sleeve instead of a 30.4? Great videos.
@TinkeringTurtle3 жыл бұрын
Good question! It’s because Suntour does not produce a 30.4mm seat post. They do make a 30.9mm, but that would not fit in the bike. Be careful when ordering!
@larrymalmstrom16833 жыл бұрын
@@TinkeringTurtle Thanks for your reply, I was pretty sure you had a good reason. I had thought I had saw a seat post somewhere for a 30.4. So I will order what you used, no reason to reinvent the wheel. Like I said before great job on your videos. If more would look at all your videos it would eliminate a lot of questions. I have looked at the all twice if not more. You have certainly made my Himiway experience enjoyable, thanks.
@TinkeringTurtle3 жыл бұрын
Thanks! Good luck with the suspension seat post!
@svonhaney3 жыл бұрын
Looking for the item numbers and/or links to the various products, but not finding them - ???
@TinkeringTurtle3 жыл бұрын
The links are included in the description of the video. if you forward the video to 16min 35sec, I included tutorials on how to get to the description on various devices. Thanks for watching!
@svonhaney3 жыл бұрын
Sorry - ultimately found them. And ordered the Lixada pannier bag, the thumb throttle, the bar end mirror, the replacement grips (with open ends and screws to tighten), a couple of different foot pumps, a couple of alarms/horns, and the Cloud 9 seat. Unfortunately, we’ve apparently got a bad controller (1 day after the first and only good ride 🙁), so we’ve not been able to try any of them out yet. Thanks! Btw, where are you located?
@TinkeringTurtle3 жыл бұрын
I hope you read in the description that I no longer endorse the Lixada pannier bag. Sorry to hear about your controller, hopefully the will get that fixed quickly. I am in the West Michigan area.
@cinnamonbeachvacations22383 жыл бұрын
Where do folks mount a cup holder on the Hemiway Cruiser?
@TinkeringTurtle3 жыл бұрын
I am assuming you mean a bottle holder...I know quite a few people get a mount that fits the four bolts on the front of the frame (meant for the front basket). Personally I put my water bottle in my rear pack and just stop when I need a drink.
@852wally2 жыл бұрын
I have almost 7000 mile on my cruiser an would like to replace the front wheel bearings. I didn't see them on the web site, was wondering if you knew where I could fine some. I don't want to take it apart until I have replacements.
@TinkeringTurtle2 жыл бұрын
Sorry Wallace, while I plan on doing a video on the front bearings sometime in the future, I don’t have any idea how big or how many bearings are in there.
@852wally2 жыл бұрын
@@TinkeringTurtle I did look at the bearings and mine were just sitting in the wheel loose and can easily fall out. I just put it back together until I can get replacements as it's not a problem yet.
@TinkeringTurtle2 жыл бұрын
@@852wally I would take one out and head to a local repair shop. I’m sure they can point you in the right direction.
@852wally2 жыл бұрын
@@TinkeringTurtle Rainy day here in Sun City, AZ so I took the wheel apart again. There are nine balls measuring a 1/4 inch in diameter with no retainer. The cup they sit in looks replaceable. Need a thin wrench to hold the nut that go's against the bearings so you can tighten the lock nut so as not to over tighten the bearings when putting back together. 9/16 and 14mm were just a little to small. I happen to have and old tool that came with something and filed that to fit. I think I'll buy a new bike next year something a little smaller that has a big enough battery to go 40 miles at about 50% power and peddling. Enjoy your videos I'll be watching for your video on the bearings to see what you come up with.
@garysavoren10883 жыл бұрын
Sorry this question isn’t related to your latest video, but I really respect your input on Himiway issues. On almost every ride, I get the error 24 code and lose power. After a minute or so, power comes back on. I have checked and double checked to make sure the motor connectors are tight. Has this happened to you and do you have any recommendations for me? Thanks for anything you can share.
@TinkeringTurtle3 жыл бұрын
Hi Gary, sorry I don’t have any experience with motor issues. And I am not sure what a “motor hall signal abnormality” is. My best recommendation is to try to get it on video and reach out to Himiway support. Sorry I couldn’t be more helpful.
@TinkeringTurtle3 жыл бұрын
Have you googled “error 24 motor hall signal abnormality”? There seems to be some info on troubleshooting. This could be a bad wire between the motor and controller. Or something simple like water or debris in one of the connectors. Good luck!
@richardm893 Жыл бұрын
The spokes tool gadget they give you dont fit the spokes do they?
@TinkeringTurtle Жыл бұрын
I’m sorry, I have never tried to use it.
@richardm893 Жыл бұрын
@@TinkeringTurtle I dont think Himiway has either.
@efieldsiii3 жыл бұрын
Tim, I need to buy a different bike rack for my trailer hitch since the fat tires do not fit in my Thule Bike rack, What type of bike carrier do you carry the 2 Himiway bikes you have since I will have my wife's soon interested in knowing what works for you
@TinkeringTurtle3 жыл бұрын
I’m sorry I don’t use a bike rack. I have a full size truck, and strap the bikes in the bed of the truck for transport. Sorry I could not be more helpful.
@mikepino65193 жыл бұрын
What size seat post did you order
@TinkeringTurtle3 жыл бұрын
27.2mm plus shim. links are in the description of the video
@1RockDog3 жыл бұрын
Hi Tim - how do you like your Lixada rear bag? Is it holding up well?
@TinkeringTurtle3 жыл бұрын
hi Rick, I like it. As I said in the video, I did have my wife add a section of Velcro to the straps so I could cinch them up tighter to the rack. And I put all my tools in one side and tore some stitches in the corner of the side pocket. Once I put half my tools in the other side it took that excess pressure of the seams. The bags have held up well for over 1400 miles. I hope to be using them for years to come.
@BobGubbins3 жыл бұрын
@@TinkeringTurtle I had a lectric bike that came with bags and they worked great I could haul 2 gallons of water in each bag with no damage to the bags. Sold that bike and ordered a couple of cruisers. Do you think the lixada bag would hold up to that amount of weight? I'm guessing not if the tools you showed ripped the bag. thanks Bob
@TinkeringTurtle3 жыл бұрын
No Bob, I am changing my mind on the Lixada bag. it has not held up well. I will be putting out an update in a future video. The lixada is a no-go.
@BobGubbins3 жыл бұрын
@@TinkeringTurtle thank you for an honest opinion
@davidspradley91823 жыл бұрын
Tim, I haven’t read everything you’ve posted about Himiway accessories. I did see your latest, question, have you considered tubeless tires? Sprad
@TinkeringTurtle3 жыл бұрын
No, I have not considered tubeless tires. They don’t make sense to me in regards to an already heavy bike that gives you help you pedaling. Tubeless only make sense to me when you want a lower weight bike that is easier to pedal.
@davidspradley91823 жыл бұрын
@@TinkeringTurtle Tim, that makes sense, I only weigh about 150 pounds soaking wet! Six foot tall and still wear the same size close as when I was 16 years old, (born in 1962) Four back surgeries later, I’ve definitely lost a lot of muscle mass. I get by as best I can. That is the reason I started studying Ebikes, also the reason I don’t have one yet... I will keep saving every nickel and dime until I own one, and no, I don’t ask for handouts. There were many years I couldn’t have cared about the cost. Disability pays about 15% of what I used to earn. The point is that many people have bad days and wish the check was in the mail and they could do whatever they wanted. Be careful what you wish for.
@dougr69253 жыл бұрын
Hi....what tire pressure do you recommend for the Himiway crusier....front and back....thanks.
@TinkeringTurtle3 жыл бұрын
Recommended pressure is 20 - 25 psi. I personally run at 25 psi mostly on paved paths. If you run on softer terrain, like sand, the 10 - 15 psi may be appropriate. (or even as low as 7 psi) Hope this helps!
@dougr69253 жыл бұрын
@@TinkeringTurtle Thanks much
@subramanianswaminathan90943 жыл бұрын
have you upgraded the display to something that shows voltage and watts?
@TinkeringTurtle3 жыл бұрын
No, sorry I haven’t. I have been hoping that Bolton ebikes would put together an upgrade package. But I haven’t seen anything yet.
@subramanianswaminathan90943 жыл бұрын
@@TinkeringTurtle is himiway using the same controller ?
@TinkeringTurtle3 жыл бұрын
I’m sorry, I don’t understand what your asking? Same controller as what?
@subramanianswaminathan90943 жыл бұрын
Why are waiting for Bolton bikes? I thought the upgrade was for himiway
@TinkeringTurtle3 жыл бұрын
oh, now I understand. Bolton ebikes offers an upgrade kit for Rad ebikes. It included a screen, higher amp controller and an optional true 750w motor. I am hoping that they would do the same thing for the Himiway bikes. That way the parts would be matched and there would be instructions for install and settings.
@patkuykendall69173 жыл бұрын
When ordering the mirror are they sold as pair or just a single mirror
@TinkeringTurtle3 жыл бұрын
Single, I think.
@patkuykendall69173 жыл бұрын
@@TinkeringTurtle oh ok thanks
@romulus23242 жыл бұрын
Which stem size did you use? 110mm or 90mm?
@TinkeringTurtle2 жыл бұрын
I used the 90mm. I detail the install in this video. component links are in the description. kzfaq.info/get/bejne/orCqoKSbxpOlgJ8.html
@miltonsokolovich40652 жыл бұрын
You need to use two types of alarms
@miltonsokolovich40652 жыл бұрын
I know your not stupid just saying bike alarms are nice and if you use say a disc brake alarm and a cheap alarm that goes under the seat that will work well with your locking system
@TinkeringTurtle2 жыл бұрын
Where I live I don’t feel the need personally, but there are areas that an alarm or two is a great idea.
@mickosullivan1762 жыл бұрын
Does anyone know how to dismiss the throttle on these bikes?
@TinkeringTurtle2 жыл бұрын
Have you unplugged it?
@mickosullivan1762 жыл бұрын
@@TinkeringTurtle Many times and fitted a new controller
@laptop5973 жыл бұрын
Can the watts be upgraded from 750 to 1000w
@TinkeringTurtle3 жыл бұрын
I haven’t seen any settings that would specifically do that.
@boblane51693 жыл бұрын
Do you have a video of how to put the Lizard Skins on the shocks?
@TinkeringTurtle3 жыл бұрын
Sorry Bob, I don’t. But I can say they are pretty easy to install. The lower portion is precut to fit around the forks, and you just have to trim off the top to fit. I hope this helps!
@boblane51693 жыл бұрын
OK no problem I was just concerned that you had to remove the forks to install.
@TinkeringTurtle3 жыл бұрын
Not at all. You just wrap it around them, there is a Velcro strip that attaches as you wrap it around.
@boblane51693 жыл бұрын
@@TinkeringTurtle 👍😁 Thank You!
@michaecartwright50743 жыл бұрын
What size Suntour seat post did you put in your Himiway?
@TinkeringTurtle3 жыл бұрын
I used the 27.2mm with a shim that brought it up to 30.4mm. Both components are linked in the description.
@michaecartwright50743 жыл бұрын
Thank you so much for the answer? Your videos are very helpful
@TinkeringTurtle3 жыл бұрын
Your welcome, and thanks.
@danaplummer31273 жыл бұрын
@@TinkeringTurtle where did you get heavier spring for seat post?
@TinkeringTurtle3 жыл бұрын
From the Suntour website: www.srsuntour.us/collections/seatposts/products/sp12-ncx-spring-kit?variant=27528526275
@dougr69253 жыл бұрын
Hi....how have you liked the seat suspension you put on your wife's bike....thanks.
@TinkeringTurtle3 жыл бұрын
It's good, she likes it.
@TinkeringTurtle3 жыл бұрын
@Doug R , one thing she is 5’ 6” tall and the seat is adjusted all the way down. FYI
@dougr69253 жыл бұрын
@@TinkeringTurtle As always, thanks much.
@eisha51842 жыл бұрын
Since you no longer recommend the one advertised for your wife’s bike, is there another seat post you do recommend? I also have a ST as well.
@TinkeringTurtle2 жыл бұрын
I use a Suntour seat post, a little expensive but VERY nice! amzn.to/3zzwcCL For my wife I recently purchased the Ganoper. it isn’t quite as good as my Suntour but it takes the shock out of bumps and she likes it. amzn.to/3NM4Nll I always purchase the 27.2mm version and get a shim to fit the bike. That way it should fit in any new bike I get with the lower cost of a shim. Hope this helps!
@eisha51842 жыл бұрын
@@TinkeringTurtle Thanks I will check it out! Also, do you have a video explaining proper handle and seat height adjustment? I’m 5’4 and just getting into biking 🚴♀️
@TinkeringTurtle2 жыл бұрын
I don’t know if there is a “proper” handle bar height. I think it is whatever you like. I do show how to change the height in this video: kzfaq.info/get/bejne/orCqoKSbxpOlgJ8.html For seat height check out this video: (around 16min 50sec) kzfaq.info/get/bejne/rZxlpqekvJ25mac.html
@eisha51842 жыл бұрын
@@TinkeringTurtle Much appreciated thanks.
@TinkeringTurtle2 жыл бұрын
@Eisha My pleasure, enjoy the ride!
@milan992242013 жыл бұрын
I need a new front tire skewer. Does anyone know the size?
@TinkeringTurtle3 жыл бұрын
amzn.to/3xwBydt
@milan992242013 жыл бұрын
@@TinkeringTurtle I'm sorry that was what I asked but I actually meant for replacing out the quick release for something else if that's possible. But thanks for the videos you've been very informative!
@TinkeringTurtle3 жыл бұрын
You can still get the size from it. Good luck with your search!
@MrMagoo-wp7pq3 жыл бұрын
I am 5' 10.5" tall. I wear pants with a 30" inseam. Will your suspension seat post raise me up too high?
@TinkeringTurtle3 жыл бұрын
The Suntour suspension seat post raises the seat approximately 3.5” over the stock fixed seat post. I hope this helps!
@MrMagoo-wp7pq3 жыл бұрын
@@TinkeringTurtle It does. Thank you. I love your videos. My Himiway stepthru is supposed to arrive this month.
@TinkeringTurtle3 жыл бұрын
Awesome! I hope you enjoy your new bike!
@ttlhoang88373 жыл бұрын
Hello Sir, Do you recommend Himiway Ebike ? There are so many upgrades, and i am sure that i dont need all of them. Just want to make sure if it is worthy for the current sale price ($1499). Please advise ! Many Thanks
@TinkeringTurtle3 жыл бұрын
When I did my research last spring I reviewed well over a dozen ebikes. For the price the Himiway had, by far, the best features. After 6 months of enjoying it, the only slight drawback is that it is tall and honestly that does not bother my wife (5’ 6”) or I (6’ 3”) at all. So yes I do recommend the Himiway bikes.
@ttlhoang88373 жыл бұрын
@@TinkeringTurtle Himiway web site claims that it will work with rider 5'3" ~ 6'4". I am 5'3''. Hope it will work for me. Thanks for your advise.
@TinkeringTurtle3 жыл бұрын
I think it comes down to your inseam. I would also suggest the step thru so you have more room when not seated. I know people have discussed inseam measurements on the Facebook groups. Maybe you can find more info there.
@ttlhoang88373 жыл бұрын
@@TinkeringTurtle Thanks so much
@misheltrujillo1972 жыл бұрын
Will most of these accessories work for the Majicycle?
@TinkeringTurtle2 жыл бұрын
I would think so, yes. But as always double check sizes before ordering.
@misheltrujillo1972 жыл бұрын
@@TinkeringTurtle ok, since im not mechanically inclined, im wanted to get those Park tool PT-09 shop cone wrenches...15mm, 18mm & 19mm. How do i know what size the Majicycle used? Sorry im so new to this 😊
@TinkeringTurtle2 жыл бұрын
I think a thin jawed adjustable wrench would be a better value. Thin jawed because an adjustable wrench with a normal thickness would not be able to tighten the pedals if they loosen. And it should also work well on the nuts that hold the rear wheel. Keep in mind that this tool will be kept on the bike and used in a situation out on the road. amzn.to/3GHmgbv
@misheltrujillo1972 жыл бұрын
@@TinkeringTurtle thank you so much for your help. This tool will do all 3 wrench sizes in one, correct? Your awesome and thanks again.
@TinkeringTurtle2 жыл бұрын
And more, it’s adjustable by spinning the cork screw piece with your thumb.
@connorlee3863 жыл бұрын
How long did your bike take to ship?
@TinkeringTurtle3 жыл бұрын
Just under 9 weeks. But keep in mind that was during the longest wait times. I think that has improved to 4-6 weeks.
@johnshrum7473 жыл бұрын
Hey Turtle, Need some help
@TinkeringTurtle3 жыл бұрын
What help can I offer?
@StuffBudDuz3 жыл бұрын
BG music too loud, unnecessary, and distracting / annoying.
@TinkeringTurtle3 жыл бұрын
sorry
@philipmangano72603 жыл бұрын
I was wondering the diameter (size) of the seat post. I ordered a Cloud C9 Select seat. The original seat wobbles even when the bracket is tightened. I am thinking of ordering a DJC Bike Suspension Seat Post shock absorber damper post from Amazon $33.90. It specified they need the correct size. Do you know the size for the cruiser. Thanks Phil
@TinkeringTurtle3 жыл бұрын
Hi Phillip, the seat post size on the cruiser and stepthru is 30.4mm. You can also buy a 27.2mm seat post and use a shim to bring it up to 30.4mm. That is what I did when I bought my Suntour suspension seat post. Good Luck!
@philipmangano72603 жыл бұрын
@@TinkeringTurtle thank you appreciate your quick response. Have a great day 👍🏼