Best First Large RC Airplane?2000mm HSDJETS-182 Red Assembly (super easy)
Рет қаралды 14,175
3 жыл бұрынHSD USA
hsdjetsusa.com/hsdjets-2000mm...
Also available at Bitgo
www.bitgohobby.com/hsdjets-20...
Boozer Barracks
/ @merryboozerrc
Boozer Merch
teespring.com/stores/merry-bo...
callie-graphics.com/collectio...
The HSDJETS-182 is a large 2 meter wing span bird. With a higher simulated appearance, trifoil propeller, six-sided transparent cabin, simulated instrument panel, and two-row four seater seats with pilots. It is equipped with HDSJETS independently developed MFC-2065 integrated control system, with independent power supply system, supporting dual-receive S-BUS output, flap compensation and other practical functions. Adopt 5055, KV500 external rotation brushless motor, Hobbywing 80A ESC, 7.4V high voltage 25g metal gear digital servo, and simulate aerial light system.
@n64uwls6a Жыл бұрын
A wonderful tow plane for full scale.
@mikebird8290 3 жыл бұрын
HI BOOZERS 👍 THIS PLANE IS BEAUTIFUL THE FIT AND FINISH IS AMAZING. VERY WELL MADE AND THOUGHT OUT DESIGN. I WATCHED YOU FLY HER ON YOUR LIVE STREAM. SHE FLEW PERFECT LOOKED LIKE A DELIGHT TO FLY. THANKS FOR ANOTHER GREAT BUILD VIDEO WED. THANKYOU LAURIE FOR FILMING AND ASSISTANCE.🇬🇧🛫🛩️🚁✈️🛬🌟 MERRY BOOZERS RC ♥️👍🤩
@seangallagher5216 3 жыл бұрын
Nice build. I appreciate the pointers along the way.
@turbonetic777 3 жыл бұрын
I have had mine for about a month, I absolutely Love it!!! I get soooooo many compliments on this Beautiful Bird! She flies Amazingly scale and is great!! The only thing I have encountered is my club flies out of a grass strip and grass gets jammed in the front wheel pant and the wheel will jam if you don’t realize. So I’m always attentive to keep it clean
@Brian_Christensen07RC 3 жыл бұрын
Looks cool!
@jeffjackson6358 3 жыл бұрын
Great job. If you ever loose the antennas that hold the wings together. Standard nylon wing bolts work in a pinch.
@jjlanda1171 3 жыл бұрын
thanks boozer now it will be easier for me to assemble mine looking forward to watching the video on how to program the Spektrum receiver on it.
@normhalliday3969 3 жыл бұрын
Just a follow up on this. I bumped the rate gain on roll up to 100% and increased the gain sensitivity to 4X. AS3X was really evident at these settings. Had it right all the time but just couldn't see it. It was so slight at 40% I couldn't see it or feel it. Had it right all the time, easy as you said. Thanks for your help.
@Grossman2868 3 жыл бұрын
A great looking plane Wes, good looking usually means great flying!
@tughillrc6327 3 жыл бұрын
Great Job Wes, Only thing I would want more is extra antennas incase they become worn .
@JeffsCustomRC 3 жыл бұрын
Beautiful plane, have really considered this one, just wish they would have more parts in stock as well as brakes which are an option on this one as well, but I’m sure they’ll get them in soon, thanks for a great build👊🏼👊🏼
@radioflitercairplanes1715 3 жыл бұрын
Looking forward to flight video and final thoughts! 😀
@MerryBoozerRC 3 жыл бұрын
We actually flew it Sunday 😉kzfaq.info/get/bejne/rsByd7eBusCbqIU.html
@EJ-74 3 жыл бұрын
Lovely
@gavstreet8976 3 жыл бұрын
Nice looking bird
@MerryBoozerRC 3 жыл бұрын
Yep really enjoyed this one
@mdriyasatali 3 жыл бұрын
Wawwwww excellent bro💓💓💓💓
@jeffreystone7327 3 жыл бұрын
Great video of an awesome looking plane. Thank you for your videos. Incredible work.
@MerryBoozerRC 3 жыл бұрын
Thank you we really are trying to make the best RC content around 😜
@jeffreystone7327 3 жыл бұрын
@@MerryBoozerRC At the moment you are nailing it. Do you have any videos on the Spektrum DX6i transmitter?
@MerryBoozerRC 3 жыл бұрын
@@jeffreystone7327 I do not at the moment the I is about two generations old now I do have the NX6 currently
@Lithonion1 3 жыл бұрын
I got mine in last week. It looks much bigger in person. It had the wrong push-rod for the elevator so waiting on that and a damaged wheel pant that I was told doesn't effect how the plane flies and they won't replace it. I removed the HSD logos off the wing and tail. I am thinking of redoing the stripes on the side with the HSD advertising. Also put a Dubro 3 blade spinner and a Master Airscrew prop as the factory prop is to fragile imo. I love the scale looks is the main reason I wanted the logos off. It CGed very easy with 6s 5000 and 6000 as well as my flight battery from RC Jetwerx a 2s 5000. Oh, if the elevator halves don't click, shave the elevator stab that slides together down just a bit and it will lock in place after. I glued my tail stabs and rudder.
@greglewis20 3 жыл бұрын
Seemingly, a far better deal than a Draco!
@Cadillacstsv06 3 жыл бұрын
Het Wesley! Great job on the assembly and video as always! If I didn't already have the CZ Cessna and CZ Cub Between this plane or the FMS 2000mm Beaver would be in the hanger! BIG HSD thumbs up! Bear regards!
@MerryBoozerRC 3 жыл бұрын
I am definitely getting a FMS Beaver wanted to order one last month but it wasn’t in stock you will see it on the channel this year at some point
@bigmanue2291 3 жыл бұрын
Looking forward to the install of the receiver and batteries. Also would like to see how easy or hard the wings come back off. Great video. Enjoyed!
@MerryBoozerRC 3 жыл бұрын
We actually took the wings off live on Sunday if you check out that video kzfaq.info/get/bejne/rsByd7eBusCbqIU.html
@shelbyseelbach9568 3 жыл бұрын
removal is the reverse of installation.
@DadsRCHangar 3 жыл бұрын
So much about this plane that’s great. Really thought about detail. Price, is good. Shame they are not in the UK 👍🏻
@topukgear 3 жыл бұрын
Yes these are available in the UK
@DadsRCHangar 3 жыл бұрын
@@topukgear Do you know who is selling them ?
@topukgear 3 жыл бұрын
@@DadsRCHangar HSDJETSUK
@kjb7229 Жыл бұрын
Wes, thanks for sharing your build. The manual calls for AIL throw of +/- 20mm, ELE at +/- 16mm and RUD at +/- 40mm. Did you use these recommendations? Thanks again!
@payitfwdrcl6171 3 жыл бұрын
Very very nice assembly. Please stop showing this plane. I’m trying to resist the FORCE. 😁. Great teamwork too! Glad you made this a family affair. ❤️
@MerryBoozerRC 3 жыл бұрын
Get ready for more videos of it lol 😂
@williewideback 3 жыл бұрын
AS3X installation? I'm anticipating that review
@normhalliday3969 3 жыл бұрын
Looking forward to the installation of the receiver. I installed the same one as you are planning and can’t get AS3X to work.
@MerryBoozerRC 3 жыл бұрын
Super easy what radio do you have?
@user-fv6vy6rm6f Ай бұрын
I really would love to get one. Are they still being made and for sale. I only see out of stock messages. Does anyone sell them? Thank you. I appreciate the unboxing and build video.
@dalerbsr.5061 3 жыл бұрын
This plane is awesome and price is nice...
@MerryBoozerRC 3 жыл бұрын
It really is. The price is smoking for the size and quality
@rcpilottony2338 3 жыл бұрын
Nice looking Plane. What's with the name of your channel? It says Happy Drunk RC to me haha.
@MerryBoozerRC 3 жыл бұрын
The Merry Boozer was the name of the B-24 liberator my grandfather flew on in WWII
@normhalliday3969 3 жыл бұрын
I have a DX9 black. I got safe working but not AS3X.
@MerryBoozerRC 3 жыл бұрын
Check this out he is a buddy of mine and this helps me out every time kzfaq.info/sun/PL-ckq_g_E1lnOTIEmd5kxlSLUVczXvBRc
@jessharris2708 2 жыл бұрын
What happens when you keep pushing till you get the snap but never happens?
@MB-ik8oj 3 жыл бұрын
Hey Boozer where did you get that rig the plane is on?
@MerryBoozerRC 3 жыл бұрын
www.foam-flite.com/store/shop/
@sistafun6972 3 жыл бұрын
Where did you purchase the plane wooden stand?
@MerryBoozerRC 3 жыл бұрын
Link is in the description of the video 😉 www.foam-flite.com/store/shop/
@larryrussell1900 3 жыл бұрын
Is it me or does the prop keep moving
@binunpenjelajah 3 жыл бұрын
Battery 2S?
@MerryBoozerRC 3 жыл бұрын
2s 2000 runs the servos the 5000 6s runs the motor you need two batteries on this model
@daaufdammahom3417 2 жыл бұрын
Still foam
@MerryBoozerRC 2 жыл бұрын
Yep but plenty of non foam planes on the channel also
@charlesrestivo870 3 жыл бұрын
Kinda looked a bit fiddly
@MerryBoozerRC 3 жыл бұрын
Not really this was one of the easiest assembly’s I’ve ever done 🤷
@charlesrestivo870 3 жыл бұрын
Cool
@charlesrestivo870 3 жыл бұрын
Did u ever do the as3x install video ?
Merry Boozer RC
Рет қаралды 9 М.
航模情报局Hobby Intelligence Agency
Рет қаралды 12 М.
兔子警官
Рет қаралды 10 МЛН