BEST FIRST LASER? LaserPecker L1 Pro Super [FULL REVIEW]
Рет қаралды 123,314
Күн бұрын🔗 Amazon (US): amzn.to/3FARCQi 🔗 Amazon (CA): www.amazon.ca/LaserPecker-Eng... 🔗 Amazon (UK): www.amazon.co.uk/dp/B08K3GSH5P
🔗 All My Laser Videos: • Laser Engraving Business
🔗 Tool Review Videos: • Just Tool Reviews
🔗 My Website: sam-craft.com
🔗 Latest Video: goo.gl/Snbz3U
🔗 Most Popular Video: goo.gl/vwp6GG
VIDEO CHAPTERS
0:00 - Intro
1:00 - Kit Contents & Unboxing
5:20 - Laser Assembly
6:52 - Design & Safety Awesomesauce
8:32 - App Install, Tech Specs & First Job Run
15:36 - What Can The LaserPecker L1 Pro Super Engrave?
16:50 - Detailed App Features & Capabilities
20:37 - Engraving Plastic
23:07 - Engraving Soft Wood
24:37 - Real Life Material Test Results (Leather, Wood, Plastic, Paper, Etc)
26:06 - Who Should Get The LaserPecker L1 Pro Super?
27:12 - PROS of the LaserPecker L1 Pro Super
29:37 - CONS of the LaserPecker L1 Pro Super
32:10 - Wrap Up & Thanks
#laserengraving #woodworking #samcraft
PRODUCT INFO FROM LASERPECKER
L1 Pro Super: The Most Compact & Safe & Easy to Use Laser Engraver with auto-stand and big cases Item NO.: LaserPecker L1Pro--Super
【Wide Application】LaserPecker pro engraver with small & lightweight design engraves on a wide variety of materials, like Paper-board, Fabric, Wood, Leather, Felt,Cloth,Fruit and more. The Easy Etcher can widely be used in Engraving, Carving, Etching, Cutting etc. 【Note】Plastic : Painted the plastic with oil-based or whiteboard pen first to engrave then wipe the color off
【 In-App Editing & Preview Mode to Control Smartly & Work on nearly any surface and tiny objects】 In-App Editing Mode with many picture editing toors allow to create any patterns and words, modify the pictures or photos to engrave ; Preview Mode make users easily adjust the size, position, and the rotation angle of the pattern on the target surface by projecting a guide laser before engraving；This unique laser etcher can engrave on any surface or on tiny objects
【More Accurate Precision】LaserPecker Pro has 0.15mm accurate light spot and high quality 405nm blue-violet laser, making accurate precision engraving; NO limit on Engraving Height; Works with powerbank; Wirelessly bluethooth controlled by a smartphone; 10,000 + lifespan built for long-term usage; Engraving range: 10*10CM; File Formats: JPG / BMP /PNG /G-code , Photo/Vector both supported The most compact and easy-to-use laser engraver of its kind
【Cool Assessories can be Choosed 】 Auto-focusing Support Stand: The built-in sensors of the stand will measure the distance in seconds between the laser generator and the target and automatically adjust the height to make sure the focal point is the correct distance from the surface of the object; Magnetic Protective Shields: Protect your eyes and directly see laser movements in the progress of engraving without wearing protective glasses： Big Case : Take all accessories in one easily
【Safe and Guarantee】LaserPecker Pro has built-in protections to ensure safe use: overheat shutdown, password lock, motion detection,goggles; Safe Certification: CE, FCC, FDA, RoHS，CDRH,IEC 60825-1 (Laser Class1)，IEC 60825-1 (Laser Class 4) ; 30 days free replacement parts ,1-year warranty, and full life customer service, plz feel free to contact if you meet any issues due to the laserPecker software will continue to be updated
🎵 Music Links: artlist.io/Sam-1947495 - Power Punch by 2050
Artlist Song Certificate Unlimited License Number - 982231 License owner - Sam
*DISCLAIMER*
This video and description contains affiliate links, which means that if you click on one of the product links, I’ll receive a small commission. This helps support the channel and allows us to continue making videos like this. Thank you for the support!
@Habu71 2 жыл бұрын
Laser Pecker - My old college nickname coincidentally.
@robertbetts101 Жыл бұрын
Again,your advice is priceless.Thanks Samcraft!
@Samcraftcom Жыл бұрын
My pleasure!
@deannaoverstreet4146 2 жыл бұрын
That is so nice! You are really getting into lazier! Great job
@AnkulOganja Жыл бұрын
Hi Sam.. loved this video.. Can you please advise if this machine can be used to engrave Silicone Plates/Bowls/Bibs ?
@sunjireh 2 жыл бұрын
When it comes to engraving, do we pay for the software separately, or once buying the machine we have access to it? Thanks.
@TheLouisianaHobbyGuy 2 жыл бұрын
Cool Sam! I just got the Dewalli 1/2W (500ma) version. It's pretty impressive!
@Samcraftcom 2 жыл бұрын
Ah, cool! I've not heard of that one, but that's also not saying much... it seems 10 new products and brand names pop up every day in this arena! We're def. in a boom of this market it seems. Looking forward to a video on yours. :)
@TheLouisianaHobbyGuy 2 жыл бұрын
@@Samcraftcom I'm just going to do a quickie review Sam. Already posted a few pics and videos on the IG though.
@MarkSeve 2 жыл бұрын
Thanks for sharing Sam.
@mpart_woodlathe-stuff 2 жыл бұрын
This has one advantage over my LM2 - it's doesn't use rails and motors to traverse the image ... it uses mirrors. This means I can mount it on my lathe tailstock and burn my makers mark directly on the bowl in the lathe.
@Samcraftcom 2 жыл бұрын
That is very true, you could do that with this small unit!
@karlriley1314 2 жыл бұрын
Very informative, thanks. I really like ur reviews.
@Samcraftcom 2 жыл бұрын
I appreciate that! Reviews are some of the most boring content, but I try to spice them up as much as possible! :)
@VintageSpeedwerks 2 жыл бұрын
The shiny stuff, def needs an anti glare medium. Dry erase marker, tempura paint etc. this low power reflects very easily
@philiprogers4071 2 жыл бұрын
Great video 📹, I make slingshots and knives from deer 🦌 antler. Would it engrave onto it or would I need a more powerful set up, (i don't own one at the moment). Thnx in advance ☺..
@yourpcmd 2 жыл бұрын
Good review, funny as heck name, and more expensive than the Ortur Laser Master 2 Pro + rotary tool.
@troybassett3123 2 жыл бұрын
I'm getting into Pneumatic Gun Engraving. I'm thinking about using this to transfer artwork onto the Gun surface. If I paint the gun surface with a flat white can you laser engrave the paint without scaring the metal surface below. That way if you don't like how it came out you can just remove the paint and start over. Any thoughts??
@harrisburgsoccer1527 2 жыл бұрын
Hi I am wanting to get into laser engraving as a hobby and I am stuck between the laserpecker l1 mini with the tripod and the comgo z1 desktop engraver. I was wondering if you could help me decide what would be best for me? I am wanting to do small projects such as leather projects (wallets/keychains), wood working engraving (not cutting), possibly customize cookies for parties, id like to try etching on a soccer ball for customization, glass etching for customization, things to that nature. My only worry with the comgo is the limited height space underneath. Would be hard to do a soccer ball on that. Also with the comgo I feel like I'd also have to spend another $75 on a cup turner module and I'm not sure if that would be necessary with the laserpecker. Thank you so much for your time and help, love the KZfaq videos.
@DavZell 2 жыл бұрын
Hi, Sam. I'm a subscriber. Is there any chance you can make the max volume of the opening music closer to your normal speaking volume? A lot of sites make them too loud, and it either upsets others in the room or blows your ears out. It's kind of like those annoyingly loud TV commercials where you have to constantly adjust the volume! ;-)
@workermannamrekrow2768 Жыл бұрын
That's what earbuds are for.
@DavZell Жыл бұрын
@@workermannamrekrow2768 For blowing your ears out? (Maybe you missed that part!)
@angelacross2216 2 жыл бұрын
A beautiful product beautifully presented. From music to explanation and demonstration …first class.
@Samcraftcom 2 жыл бұрын
Thank you very much!
@ShaunGud 2 жыл бұрын
Did you try it on anything curved? As I’m looking to engrave round wood. Thanks in advance.
@gillianchisholm6432 2 жыл бұрын
I have one of these, the ruler supplied is exactly the right length to measure the distance when using the tripod
@gaetanlecuyer6872 2 жыл бұрын
i use my 3d printer ,made a bracket to hold it and use z axe to get the perfect mesure....:)
@ronnorris1504 2 жыл бұрын
Great presentation for the product. Wished it had a bigger cutting area.
@Samcraftcom 2 жыл бұрын
That and a more powerful laser for faster jobs and wider material uses.
@tornadotornado8732 Жыл бұрын
super.Thanks.. Can this machine print small letters, 1mm by 1mm?
@jeffreylcc 2 жыл бұрын
Hello, Is It possible to engrave on the back of the I Phone or I Pad or any electronic device as Apple does ? thanks
@matthewowensby3427 2 жыл бұрын
Hi Sam, I just bought my first laser engraver. I went with the xtool d1, I almost went with our like you have. Hopefully it will do just as good.. can you tell me or make a video of where you get designs and stuff and how you set up to do mass engraving at one time. I'm new to this. Biggest thing is I need to know where to get designs to transfer over.
@huntingtimes5474 2 жыл бұрын
Following
@christopheradams7942 2 жыл бұрын
I love my D1.
@johnclore6285 Жыл бұрын
I was wondering about pics that you can take on your cell phones if it would engrave them. Thanks. Best vid yet.
@Samcraftcom Жыл бұрын
Glad I could help
@Partnerthedog 3 ай бұрын
@@Samcraftcom will it work on silver?
@MannyzCustomz Ай бұрын
A little late couldn't watch the full video yet would this laser be able to engrave on leather patches?
@elizabethgrzybowski2960 Жыл бұрын
just came across your video. is this a current site or am i just wasting my time. great video.
@metalworksmachineshop 2 жыл бұрын
looks like a good tool to tag your logo on items you sell.
@LetsDIYIt Жыл бұрын
You can change the settings from metric to imperial if you are US based and find it easier. Metric will be more accurate to get close measurements quickly if you are used to it, but most US based people are used to imperial so it might be quicker and easier to switch if that is what you are used to
@SolarDrew 2 жыл бұрын
Just on ur recommendation I just ordered a jinsoku 1620 shipped for $245 stating “used” but proclaimed overstock. Please tell me I didn’t get ripped off!
@Whois2440 2 жыл бұрын
Great video Sam.
@Samcraftcom 2 жыл бұрын
Thanks!
@PaulGriffith Жыл бұрын
Just found your channel. This laser engraver looks like it would be good for someone starting as a hobby. Have you done wood business cards?
@Samcraftcom Жыл бұрын
I agree.. only best for a hobbyist. I’ve not made wooden cards yet but have done a few aluminum ones. :)
@norm5785 2 жыл бұрын
Interesting product
@BuckeyeStormsProductions 9 ай бұрын
This is an older video, so not sure if you'll see this, but I wondered if you can import an SVG file without having to convert it to another format first, like BMP or GIF?
@Samcraftcom 9 ай бұрын
I honestly do not remember and no longer have this machine. Overall it wasn't that good in my opinion.
@NancyBryantIdeas 2 жыл бұрын
Would it engrave plastic tool handles?
@darleneclark6098 2 жыл бұрын
Love the intro ❤️hey Sam, can that cut stencils? Like for painting. Omg I just looked up the site. $500 + not in my budget 😢
@miguelregalado1319 2 жыл бұрын
You can get a used on on Amazon for under 250 but it doesn’t come with advanced stand or shield. I bought it this way and love it
@SouthbayCreations 2 жыл бұрын
$500!!! 🤯🤯 That's absolutely CRAZY OVERPRICED!!
@SouthbayCreations 2 жыл бұрын
Sorry, $551!!!
@weilam03 2 жыл бұрын
You can get a diode laser to cut stencils for 100-300$.
@Samcraftcom 2 жыл бұрын
Yeah... this one is pricey for what you get really.
@pixelmator Жыл бұрын
Isn't the downside to this laser/cutter is the size of material that can be placed under it and still have the orange shields. Also the laser would have a range limit on how far out it can engrave or cut right? I can see this for small little projects but nothing more than that. Looks nice and setup does look simple only wish the base was bigger.
@sheldontan9381 2 жыл бұрын
can u do a material test on lp2?
@asliel1904 2 жыл бұрын
Hi! What setting would you use for acrylic, 5mm. Mainly for embossing for cookies. Having trouble with melting/burning, the lasered area comes out brownish/burnt. Thank you!
@Samcraftcom 2 жыл бұрын
I wouldn't use a laser for that, I would use a CNC machine.
@stephenray4035 Жыл бұрын
Can you engrave on glass with this?
@acessford101 2 жыл бұрын
So, depth is speed. Your wall plug would work great at 90 power and 70 depth.
@dondeere Жыл бұрын
i am thanking about getting a engraver lasar of the cheaper one 300 to 500 range what would be a good buy. i am disan;ed dont have much money would like to no get jipt
@MakingLemonadeCreations 2 жыл бұрын
Could this be used onsite at craft shows for producing products onsite? Maybe coasters with a cork center? Since it is just engraving, should not have much smell or a need for exhaust, right? Too bad it can't do slate coasters.
@Samcraftcom 2 жыл бұрын
It could, it is very portable. HOWEVER any time you engrave anything, there is smell/smoke/exhaust put off... you're burning the items. So from that standpoint I wouldn't advise it.
@JackSmith-ly2to 6 ай бұрын
On the ruler I noticed it was not flat with the surface of the engraver. For that reason one end of the engraving came out not in focus.
@revbikerbigd8664 2 жыл бұрын
Will it do a polymer?
@SolarDrew 2 жыл бұрын
Good video Sam
@colunaemdia3314 2 жыл бұрын
I bought the laserpecker one, but it doesn't finish recording. it stops either at the beginning or in the middle. no matter the configuration. the distance is right etc... help!!!
@honeylilbees 2 жыл бұрын
I just ordered the LP2 Deluxe, havent received it yet. Just wanted to ask if you used or needed air filtration for the LP1?
@Samcraftcom 2 жыл бұрын
Any time you engrave material you will want some way to get the fumes and smoke away from you. Whether it's a box fan, wearing a respirator, or elaborate enclosure, you don't want to breath this stuff in!
@honeylilbees 2 жыл бұрын
@@Samcraftcom THANK YOU for responding! Any suggestions?
@threedeeprince 2 жыл бұрын
I went they so many diode lasers before I finally gave up and bought the co2 laser I actually wanted…
@alanjagroop1282 Жыл бұрын
My main issue. U see basic model. That cheap mini tripod keep falling down. I hate that. I see why they wanted u to buy the pro version. But i find that's way too much for the same laser. But I guess u paying for safety shield a adjustable Motorized laser stand. Is there anyway to I can get a cheaper version of that Motorized stand. Can someone do a diy tutorial laser pecker stand out of cheap materials. Manually adjusting. No Motorized mechanisms. For the basic laser pecker. Safety shield easy to make. But manual laser pecker stand. I need some help making it
@aim6mac 2 жыл бұрын
I've got the LaserPecker 2 can you do a comparison video of those two?
@Samcraftcom 2 жыл бұрын
I could if I had the 2 model. :) From what I saw from Brandon at Make or Break Workshop on KZfaq, the 2 model is much improved.
@aim6mac 2 жыл бұрын
@@Samcraftcom I've got mine for a few weeks now, i never tested the LP1/LP1 Pro.
@photosbyjf 2 жыл бұрын
does this adjust focus on the fly? such as when engraving something that is not flat
@Samcraftcom 2 жыл бұрын
It doesn't -- it only does the initial leveling/focus then stays fixed for the duration of the project.
@m16owner Жыл бұрын
Size of the work area?
@georgemartinez7455 2 жыл бұрын
Will the app work on an iPad? Using a larger screen may be easier to use.
@Samcraftcom 2 жыл бұрын
It should work on all iOS devices.
@worldrenownedentertainment Жыл бұрын
this only does flat pieces I would go with the D1xtool
@johnngumo7775 Жыл бұрын
How do I get one
@blacklifesmatter4332 9 ай бұрын
Cool
@davecil 2 ай бұрын
Do you think this model would work for cutting guitar inlays and slots?
@Samcraftcom 2 ай бұрын
No, this is not a cutting machine or one that I really recommend now as of 2024.
@lily.3560 Жыл бұрын
Hey Sam, does this cut cardstock? Or does it burn it?
@Samcraftcom Жыл бұрын
It will cut by burning. You'll have to dial in your settings to go slow enough to burn through, but fast enough to not ignite it.
@weilam03 2 жыл бұрын
With this machine you pay for convenience and speed. Laser power and bedsize are compromised. It's a very niche product but could be useful to some.
@TheFalconJetDriver 2 жыл бұрын
It is a neat concept however it lacks a lot. Low power 1/2 watt. Small foot print, you are tied to their App. if anyone is serious about a Laser engraver insure you can use Lightburn software, far superior software. Not to mention they are pretty proud of this for its capabilities.
@Samcraftcom 2 жыл бұрын
Agreed all around!
@brumasbusiness 2 жыл бұрын
The paper was wavy. The depth is not the same everywhere
@innovator777 2 жыл бұрын
Is there a version with a rotary tool that also doubles as a traveling platform?
@Samcraftcom 2 жыл бұрын
That is the LaserPecker L2 model -- yet to be released to the public. Brandon at Make or Break Shop just did a video on that model. He has a great channel and produces wonderful content! Here's a link to his channel: kzfaq.infovideos
@biologistjim4905 2 жыл бұрын
What do you think of 3-D printers?
@weilam03 2 жыл бұрын
@@biologistjim4905 I'm a CO2 laser guy and got a fdm 3d printer a month ago. There is a huge learning curve.
@joelrggizmo1373 Жыл бұрын
That unit compatible was light burn?
@Samcraftcom Жыл бұрын
This one is not.. honestly I would not recommend this laser for anyone other than tinkering or semi-hobby level.
@steveferguson1232 2 жыл бұрын
This would be cool for Angela to use to put her logo in her soap. If it would do it that is
@Samcraftcom 2 жыл бұрын
:) I've asked her if she would be interested, she didn't think so. LOL
@williamraap9277 2 жыл бұрын
Hey sam i turn pens on a lathe will it work on pens
@Samcraftcom 2 жыл бұрын
Depending on the wood species and density, it may take some time.
@greaper512 Жыл бұрын
You literally said a few minutes earlier white and clear objects cant be engraved😂 love your videos tho. Especially about the business end of things.
@Samcraftcom Жыл бұрын
My bad, do as I say not as I do! LOL
@shaquiel888 2 жыл бұрын
is the new laserpecker pro 2 is good for Etsy eBay buisness
@Samcraftcom 2 жыл бұрын
I have no direct experience with it, sorry.
@TheCartoons4you 2 жыл бұрын
Thanks again for the file! Which Lazer would you recommend for a small business such as yourself? Assuming you're using it very frequently, doing batches and the like. One that can do steel as well as wood/leather/plastic. Take care!
@Samcraftcom 2 жыл бұрын
In my workshop, my Ortur Laser Master 2 Pro is the workhorse. It is set up with my (simple) templates and runs all my customer items for engraving.
@someonedoesitbetter3151 10 ай бұрын
Didn't you use to make videos on renovating your mobile home?
@Samcraftcom 10 ай бұрын
That's on another KZfaq channel, but yes, same family. :) @greenacrehomestead
@tucklbuck Жыл бұрын
sam you are gorgeous and love your videos
@JoseEspinoza-vf4os 2 жыл бұрын
What is the max cutting area for this?
@Samcraftcom 2 жыл бұрын
This machine will only cut paper or soft materials. It's max working area is 100mm x 100mm (3.97" x 3.97").
@gonakedmagazine8835 2 жыл бұрын
Isn't the ruler designed to indicate the perfect distance from the laser to the target?
@Samcraftcom 2 жыл бұрын
Yes, it is also the same focal length. :)
@nicobogaard2315 2 жыл бұрын
Great review, nice results but overlooked the ‘does not engrave on white’ wich explains the plug-result. The price in The Netherlands (about 450€) is too steep for me. I would like to have something like this in my small wood hobby shop, leave my mark on all my makings. Being patient is my burden for the time being.
@adrimathlener8008 2 жыл бұрын
Dit is een kleine & compacte en nog redelijk betaalbare unit: Jinsoku LE-1620 Portable 5.5W Single Arm Laser Engraver
@Samcraftcom 2 жыл бұрын
I would recommend the Genmitsu Jinsoku LE-1620 for a small, affordable, and still fully capable diode laser.
@sayyamzahid505 2 жыл бұрын
I live in Karachi Pakistan I like your comments if you don't mind
@rcash3625 2 жыл бұрын
I was thinking the same thing with the plug lol
@shaquiel888 2 жыл бұрын
It can be use on metal?
@Samcraftcom 2 жыл бұрын
Not this laser -- too weak.
@jakerazmataz852 Жыл бұрын
Dude, every time I watch your vids I learn something. I was just wondering today if you need a website to sell online. I've heard people use youtube and Facebook, which is cool. And I was wondering how QR codes work, well there I go.
@Samcraftcom Жыл бұрын
My own personal thoughts on sales platforms: the big social medias want to promote their own platforms first. So I have a ton of online sales routes: my own website, etsy store, facebook & instagram shop, google business page, and Spring merch store. These are easy as most all of my items are digital goods. However I'll be launching physical products under Samcraft very soon and will then begin the logistical "fun" of managing and fulfilling orders for several platforms too.
@jakerazmataz852 Жыл бұрын
@@Samcraftcom Thank you. You always come through. I'm in the process of buying a Laser Pecker 3 with all the accessories lighty used for a steal. I plan on starting with "dog tags" and tumblers. I'm looking forward to see how you deal with the changes.👍🏻
@miata350 Ай бұрын
I shouldn't be surprised that this app is every bit as annoying as any other app these days. Any way to use it with PC?
@78harj Жыл бұрын
sam the laser packer 1 will it do coasters?
@rcash3625 2 жыл бұрын
does this only work with a phone app?
@Samcraftcom 2 жыл бұрын
I believe their app is multi-vendor compatible, but check their website to be sure.
@TheWoodHaven 2 жыл бұрын
This is about my speed of laser. Bummer it can't do metal though. I would like to engrave logos onto water bottles :/
@Samcraftcom 2 жыл бұрын
Yeah this is a cool little laser, but not powerful enough for the more common things people think of or expect with laser engravers.
@jax7924 2 жыл бұрын
Save your money and get the ortur laser master 2 pro.
@TP-si3km Жыл бұрын
😃👍Danke für das Video. Sieht gut aus, aber zu schwach für mich
@robertbates5537 2 жыл бұрын
I think it said it didn't do engraving on white when you ran through the initial set-up
@Samcraftcom 2 жыл бұрын
Yeah, I missed that part. :)
@karlclarkeable 2 жыл бұрын
Go over it with a black dry wipe marker then laser wipe off after you finish
@jamesnash1497 2 жыл бұрын
How long dooooze the laser last. Can you make a lot of engravings or does it last for one month and poof it’s all F A S E R E D out.
@brianwaskow5910 2 жыл бұрын
LaserPecker😆
@JohnDoe-qc3bo 2 жыл бұрын
For added safety I would keep it in a small room with a safety warning on the door. Remember, these can instantly blind someone if that beam gets anywhere near their eyes.
@chrisreynolds2410 2 жыл бұрын
Fake News!
@Jimmolter761 2 жыл бұрын
Guess thats why I see people using blue painters tape on light colored wood.
@karencary3312 2 жыл бұрын
I like for a novice like me.
@mellor88 Жыл бұрын
I bet Superman has a LaserPecker
@huntingtimes5474 2 жыл бұрын
What a boo-boo mucker at 20:50 after telling us at 15:50 suppose its new to you! I'd make the same mistake too only to feel stupid being told what I already known. The machine looks like a little hobbie machine for a teen as a trail before commiting to spend more. Great in depth video. Well done hi.
@mrbinary71 2 жыл бұрын
Regular price $689 and on sale for $551. At that price point I cant see any practical use for this thing
@Samcraftcom 2 жыл бұрын
I agree.
@TimotheosEnterprisesMedia 2 жыл бұрын
no white material
@swizard 2 жыл бұрын
Did I miss that you did not disclose you got this for free?
@Samcraftcom 2 жыл бұрын
I don't have to -- that's what the popup in the corner of the video and KZfaq video settings for paid promotion do.
@coastalrider1155 2 жыл бұрын
There’s always one c##t
@darleneclark6098 2 жыл бұрын
@@Samcraftcom glad you didn't pay $550 for that. It's a cool toy, but way over priced.
@nicolebarnett8702 2 жыл бұрын
😆 gonna try to get whoever you can just because your personality is a +... it's not.
@mohawkvalleyherefords4860 2 жыл бұрын
Uhhh, did you just say LaserPecker
@edgotbait 2 жыл бұрын
Rofl $700+ for that. Don’t think so I can get a k40 laser for half the price and blow that out of the water
@johnperardua4596 Жыл бұрын
Cool engraver but disappointing it can't engrave metal.
@DavZell 2 жыл бұрын
The app warned you about white objects!! Lol
@OldAlastair 2 жыл бұрын
Far to expensive for me
@spicyavo3929 2 жыл бұрын
Thanks for deleting my honest comment
@Samcraftcom 2 жыл бұрын
This is the only comment from your username that I see across all my videos when I search your username on my dashboard. Nothing comes up in the moderation panel for your name either. I don't delete comments unless they're truly trash. If yours wasn't, it's very possible KZfaq auto-nuked it, or someone flagged it. Reply to this with your honest comment. I welcome them!
@mariusdocea438 2 жыл бұрын
thanks for all presentation,i hope to buy new model Ortur Laser Master 3 in maxim 6 mons :-) mor professional,with nice conection ! for a good pro work.i need a laser with maxim 15x15 but for good qualyry build..if you have a recoamndation.Thanks
@ricric9521 7 ай бұрын
Duh it says no white objects 🤦♂
@graham3815 2 жыл бұрын
Shit laser lol
@spicyavo3929 2 жыл бұрын
Careful, your honest review will probably get deleted like mine did
LaserPecker 2 АЙФОН среди Лазерных Граверов. Самый КОМПАКТНЫЙ маркировочный гравер в Мире.Гравер 3в1
Ящик с инструментом
Рет қаралды 84 М.
Go Gizmo!
Рет қаралды 9 МЛН
Aurora Tech
Рет қаралды 33 М.
Luigi's Product Reviews
Рет қаралды 455 М.
alena.wildberry
Рет қаралды 3,5 МЛН
Пхали Хинкали
Рет қаралды 4,6 МЛН