LaserPecker 4 Laser Engraver: the KING has Returned.

Рет қаралды 105,420

Күн бұрын

Get the LaserPecker 4 from its official Amazon page: amzn.to/3GjrLOu or its official site: www.laserpecker.net/products/.... The LaserPecker 4 is the world’s first laser engraver that comes with a dual-laser system, which enables you to engrave on almost any material seamlessly. If you just want one laser engraver for all the possible materials you want to work on, and for those who want to spend more time enjoying engraving and less time working on it, this LaserPecker 4 Laser Engraver should be right at the top on your shopping list.
Special thanks to @Simon for proofreading, please subscribe!
/ gadgetsgimmicksandtec
Here is the timeline:
00:00 Intro
01:17 New Accessories
01:27 Rotary Extension
02:57 Slide Extension
03:45 LaserPecker 4 Design
04:40 How to Use?
05:16 Display Walkthrough
05:44 APP Walkthrough
06:55 Engraving Ability
Seamless engraving ability for multiple-material objects
11:02 Conclusion
11:44 My story with LaserPecker
--------- SUPPORT
Support me if you can (affiliate link, at no cost to you but I do get a small kickback if you make a successful purchase): Amazon: amzn.to/36dS0nN
AliExpress: s.click.aliexpress.com/e/3JQIiec
Tronsmart speaker official store: s.click.aliexpress.com/e/_DlB...
amzn.to/3AAiIEM
Check out more cool products from the official Xiaomi store: amzn.to/36cBJiS
----- My gear for video making
Insta360 One X2: www.insta360.com/sal/one_x2?i...
Insta360 GO: www.insta360.com/sal/go?insrc...
Insta360: amzn.to/3IYlCIa
My main mic: amzn.to/3ve2ct9
YC Onion camera slider: amzn.to/3yZHDln
Gravastar Bluetooth Speakers Mars Pro: amzn.to/3z5f0mX
------- SUBSCRIBE
FOLLOW ME IN THESE PLACES FOR UPDATES
My Shorts channel: / @samiluoshorts
My TikTok: / samiluotech
My friend xiaolindrawing YTB: bit.ly/2RE5VQd
My CN channel: bit.ly/3sFxTaL
FB: / samiluoreview
Twitter: / samiluo
Instagram: / samiluo
MY BLOG: bit.ly/2kUpo99

Пікірлер: 213

@SamiLuo 6 ай бұрын

Get the LaserPecker 4 from its official Amazon page: amzn.to/3ZHHgHZ or its official site: www.laserpecker.net/products/laserpecker-4?ref=OJZFnF5YK_8fhf.

@SamiLuo Жыл бұрын

English subtitles have been upated. Spent a massive week on this video, please make sure to subscribe: www.youtube.com/@SamiLuo/

@SR-te2db Жыл бұрын

Video is very well done!

@flyingmonkeys9774 Жыл бұрын

How did you use the Mr.Carve M1 with SeaCAD or EZCAD?

@SamiLuo Жыл бұрын

@@SR-te2db Thanks

@SamiLuo Жыл бұрын

@@flyingmonkeys9774 Hi, I think I did a specific tutorial about that in the Mr Carve M1 video but if you want more specific can you look for a tutorial on KZfaq? :DD

@dwaynenicely1629 Жыл бұрын

Amazing well thought out and engineered product for the masses. Laser Pecker 4...

@marineg.e7096 Жыл бұрын

Thank you for the detailed and honest review . I hope next week i receive my LP 2 .

@SamiLuo Жыл бұрын

Have fun!

@redy2kl 7 ай бұрын

Can't believe I missed this video 🤦‍♂️ thanks for all this info Sami

@Thefadax Жыл бұрын

5 stars video! I just backed one premium bundle !

@SamiLuo Жыл бұрын

Thanks for watching. You made the right choice!

@apallohadas Жыл бұрын

Good video! Glad I backed the project.

@SamiLuo Жыл бұрын

You definitely made the perfect choice

@ThePremeirZ Ай бұрын

100% buying and subbing best review for sure

@antun1731 Ай бұрын

If you want to buy, my company is selling them, so give me some feedback and we can make it happen!

@jrzombeast6477 Жыл бұрын

yes.. new sub. good video. new to the game and want something easy to use and this helped me out a lot. thanks

@JORGINHODONASCIMENTO 10 ай бұрын

I want to know if it does engrave deep or if it only does marking. I am interested in an engraving machine that does a great job with depth. Thanks for the answer.

@LCfer Жыл бұрын

Hope now I can make stamp (using photosensitive rubber) and cut it in one go. Before I need to cut using hot wire manually (to seal the edge too, so it won’t absorb ink and ruin the stamp with bleeding edge).

@Demarquisk Жыл бұрын

I was just a bit too late. I was actually looking for the Mr. Carve video and stumbled upon this beautiful thing. I was all ready to go for the Kickstarter, but then I read up and found it ended 5 days earlier.

@SamiLuo Жыл бұрын

That's fine, they will put on sale some day :D

@vincentdemyttenaere4438 Жыл бұрын

I just backed one (I had the LP2). A question, the roller from the LP2, can it be used on the LP4? (for longer engravings)

@SamiLuo Жыл бұрын

Hi, yes! All LP2 accessories are supported for the LP4 :D

@alazouari Жыл бұрын

Hello ! What is the maximum size of the product surface which is possible to engrave ?

@user-sd6yz6uv7j Жыл бұрын

Hi mate-can you tell us if it engraves on Silicone? I can seem to find the information on their website on in your video?

@user-vk8lu5iy5d Жыл бұрын

Do you know if Can I buy rotary extension separately? For the pecker 2 model ?

@SamiLuo Жыл бұрын

The crowdfunding campaign will end in two days! I seriously doubt there will be at this low price EVER! GO GO GO, it's your only last chance! laserpecker-4-dual-laser.kckb.st/samiluo

@jakerazmataz852 Жыл бұрын

It's $4700 now. What was it then?

@PAS2010D Жыл бұрын

@Jake Razmataz not high at all. I got the premium bundle based on this guy's video. Pretty sure it was 1700? It was in a weird currency and I didn't do the conversion.

@2005whitewa 11 ай бұрын

Fully loaded was 1800 usd plus another 80-90 usd to ship to the lower 48

@stockbatch4109 Жыл бұрын

Do I need a Spray product like "Brilliance" to get Black markings on various metals with Laser Pecker 3 or 4?

@LetsDIYIt Жыл бұрын

Thanks for the review. Would you say these are good for light/beginner commercial use? I have a LP1 Pro just to familiarize myself with the tech and have backed the Kickstarter for the LP4.

@SamiLuo Жыл бұрын

Yes, absolutely. The best part for the LP 4 is it comes with an intuitive App and you can basically do everything there. I've reviewed many others and they all have to connect to a computer and adjust this and that, lots of hassle

@1985cactus 10 ай бұрын

Does it do real deep engraving or just shallow surface burning?

@JoashGuevara Жыл бұрын

Amazing product! Would you happen to know if you can use this to engrave on gold foil paper?

@SamiLuo Жыл бұрын

You can :D

@EatandTweet Жыл бұрын

With the dice / keyboard how does the laser know the placement? Thanks.

@luka5games308 2 ай бұрын

But can I take it and let's say engrave something on wall? Or it have to be attached to base and not rotated?

@Zodliness Жыл бұрын

I personally can't justify upgrading from my £609 LP pro1 (deluxe kit) because of the differences in price ($1899 just the engraver) compared to similarly powered engravers at a fraction of the cost, like the XTool pro range or Atomstack engravers. Especially when factoring in the cost of all the additional and some essential accessories one requires. This product's only fundamental advantage (like it's predecessors) is the portability. The effectively small 'static' engraving area is also a major factor, because anything larger will require the purchasing the 'optional' powered accessories. In conclusion, I cannot fault the product range for it's amazing build quality and again I'll mention how portable their entire range is. but this is another beautifully made product for the DIY enthusiasts, with a substantial reserve of cash to spend on an (all be it admittedly) 'above normal par' consumer-grade laser engraver product. This is of course my humble opinion, I could be wrong. 😉 (Maybe I just haven't got that kind of spare cash laying around).

@TheBrownNote420 Жыл бұрын

What lazer engraver would u recommend?

@jan97able Жыл бұрын

Does the shield fit onto the Laserpecker3?

@maxmixer Жыл бұрын

Great video, defo going to get one, now Zippos and Wood can be done all at once, would it engrave on a 9ct gold ring ?

@SamiLuo Жыл бұрын

Yes! It has good result on gold 😁

@user-uk3pp6bb9g Жыл бұрын

Does laserpecker 3 work on metals such as chrome and nickel?

@alecf3691 Жыл бұрын

Don’t own an engraver yet. Seems like a good one to start. Will it engrave the metal water bottles that are coated? Like a Yeti powder coated water bottle?

@hugotorrez2922 Жыл бұрын

Yes it will, I have the laser pecker 2 and it works great, I just finished laser engraving into a hydro flask. Making customs for the nephews and nieces 👌🏼

@SamiLuo Жыл бұрын

yes, it will have a super good result on that 😁😁

@SamiLuo Жыл бұрын

😁😁

@kevins4517 Жыл бұрын

Hi Great Review - I have pledged for the full set = 4 + Rotary + slider. What is the accessory that you show at 7:19 crawling along for a big engrave - I don't see this in the list of accessories?

@SamiLuo Жыл бұрын

Thanks for asking. That's from the LaserPecker 2 :DDD They will have a new one for the LaserPecker 4 later this year :DD

@michaelatkinson Жыл бұрын

Nice one Sami!

@SamiLuo Жыл бұрын

Thanks for the visit

@Valhall1414 Жыл бұрын

Will the LP4 detect several objects on the slide table or do you have to preadjust for every item?

@SamiLuo Жыл бұрын

Have to preadjust :D

@blahblah6025 Жыл бұрын

Where can I buy the laser? Can you send a link that works?

@thewatchmission7693 Жыл бұрын

very very helpful! Do you happen to know if it can engrave different layers within glass or crystal? meaning, can it engrave within the middle of the crystal?

@SamiLuo Жыл бұрын

Hi, that can't be realized though...

@flutcho 9 ай бұрын

Hello, thank you for this great review. I don't find a Clear answer, do you know if we can use the new rotary extension from LP4 on a LP2? Thanks a lot for your feedback!

@SamiLuo 9 ай бұрын

Yes, they are compatible, 100% sure :D

@MrDavesbox1 Жыл бұрын

Sami...can you hook up your laptop to the lazerpecker 4? I think thats what the USB connection is for yes? Please let me know we will buy 2 units if we can use a computer ( not a cell phone) to control / send images- Thanks!

@tibbysun Жыл бұрын

Hello. Hope you can help me by answering a question. When you engrave the ring inside, I noticed that you did not center the text, was this a mistake, or is it impossible to center the text do to the angle?

@SamiLuo Жыл бұрын

Hi, thanks for commenting. Actually I also noticed that, it can do perfect engraving for large sized rings, but not that good for extremely small sized ring but sorry I don't have time to test it carefully at the moment but I have forwarded your question to the official LaserPecker team, would you mind to join their official group and ask the official to test for you? Here is the group facebook.com/groups/1239220466858169

@ShannonAwSg Жыл бұрын

Mr Carve is coming out with a twin laser as well. Is mr carve or laserpecker for material engraving? Which provides a smoother finish?

@SamiLuo Жыл бұрын

Hi, thanks for asking. I happened to have the Mr Carve's new dual laser engraver as well. I'm still testing and I will compare the two, stay tuned :D

@JMPDev Жыл бұрын

Hi Sami, KZfaq won’t auto-use timestamps from the description unless you start with a 0:00 timestamp. Could you please add that? That way the time stamps will appear in the video as well :)

@SamiLuo Жыл бұрын

thank you so much for reminding! i always wonder why it doesn't show timestamps while i added lol

@SamiLuo Жыл бұрын

I have added :DD

@Enexiis Жыл бұрын

can you still use the laserpecker 4 mobile? Like holding the machine itself with your hands and pushing it onto something? (Like LP2/3)

@SamiLuo Жыл бұрын

Yep, you can ...

@bneil4059 11 ай бұрын

Will it eventually have a Trolley Mode?

@masterfarmscannabis2362 Жыл бұрын

Good video, Best review video that laser pecker have had

@SamiLuo Жыл бұрын

Thanks

@easttexasengineering3489 Жыл бұрын

Do you know if this will engrave part numbers in steel parts? We currently pay another shop to do this to our manufactured aluminum and tool steel parts. Please help . Looking to buy one ASAP if it can. I know you mentioned stainless steel but we’re engraving plane steel. Thanks in advanced

@SamiLuo Жыл бұрын

Hi yes, it would be no problem at all, you can use the 1064nm laser for the plane steel :DD this is what sets it different from that 450nm, which only works for 304 stainless steel .. :DDDD

@LauMusix Жыл бұрын

What material was the black ring the Video? Can it do Tungsten ring?

@SamiLuo Жыл бұрын

It would be perfect for Tungsten ring :D

@sergediaz5009 Жыл бұрын

Hello the LaserPecker 4 engraves on natural crystals like rose quartz, amethyst etc ?? Thank you

@SamiLuo Жыл бұрын

Hi, you have to paint black on those materials and then engrave, but seems the result is not that great though :((

@joelrggizmo1373 Жыл бұрын

Is this rotary compatible with other lasers ? I need to use this roller with my other laser ORTUR 2 & 3 I simply need to know which cables are compatible and which adapters I need to use. I would like to see you do a video on which cables. compatible with other machines the Addams Stack seems to work fine with my ORTUR Pro 2 & Pro 3 but I would like to be able to use the rotary check with my ORTUR Pro 2 & Pro 3 when I got mine, the rotary Chuck was not available so someone gave me there. D1 X Tool & I want to use it with my existing ORTUR Pro 2 & Pro 3

@SamiLuo Жыл бұрын

Hi, I don't think this rotary will be compatible with others :DD it's type-c to type-c cable :DD

@did3d523 11 ай бұрын

what is same but less expansive? thks

@rhysmassengill8758 Жыл бұрын

Might be kind of a dumb question for you, but if you were to get a laser engraver with the proper ventilation and enclosure for it, would I be able to leave it unattended in my garage while I work on other things inside? I would really like to get one of these but if I need to be present at all times it’s running I’m not sure it’s for me. I just can’t spend hours a day attending to it just to monitor it. Maybe I could install a smoke detector like you have? Please let me know your thoughts on this, thanks!

@SamiLuo Жыл бұрын

Hi, thanks for asking. That's actually a very good question because everyone wants to use a machine in a safe and sound way! You can leave it unattended without worry, you don't have to spend hours being aside. I showed it has several safety measures at 10:50 like when it detects shield off or tilting it will stop automatically :DD

@doen.8724 Жыл бұрын

What an irresponsible responds. You don't leave a laser unattended. Especially when you work on organics, like wood. A fire can start in a couple seconds.

@lethalshadowsgaming Жыл бұрын

Can this be used as a portable laser? Can I put it up against a wooden door for example to engrave it?

@SamiLuo Жыл бұрын

Hi, you can do that without problem :DD

@XarOOraX Жыл бұрын

Will there be a trolly mode like from the LP2?

@SamiLuo Жыл бұрын

The trolly from LP2 is not compatible with the LP4, but there will be a new trolly for LP4 later :D

@Titanion. Жыл бұрын

I just wish they can come up with a laser engraver that can do colour laser on titanium

@Shadowman-in9zj Жыл бұрын

Come on man !!! I just bought the lp2 and know your saying I’m gonna have to save up for this one now?

@derekroutledge100 Жыл бұрын

same here just got it last weekend ...i would have waited for the LP4 .. but I do like the LP2..

@SamiLuo Жыл бұрын

LP2 is still my go-to laser engraver as well mate

@DowneyBums Жыл бұрын

Is this compatible with an iPhone?

@Shadowman-in9zj Жыл бұрын

@@DowneyBums yes Yes

@asok5817 Жыл бұрын

Hi, just having problem with my laser pecker 3 with green/red light keep flashing and showing that Bluetooth in abnormal connection. Any solution for this?

@SamiLuo Жыл бұрын

Hey you can contact the officila laserpecker to see the matter :D

@memyselfi434 Жыл бұрын

How do you manage to engrave different objects at different positions in a single step like in 09:00?

@SamiLuo Жыл бұрын

Hi we first designed all the letters and then set parameters for each based on the cube material and then previewed the printing area to make sure it would engrave properly, then the LP4 would automatically switch between 450nm and 1064nm laser to engrave at one pass. :D

@memyselfi434 Жыл бұрын

@@SamiLuo Hi, thanks for answering. But the focus of my question is how you tell the LP4 to engrave at different positions. How does the LP4 know, where the different parts are positioned?

@chitung2277 Жыл бұрын

I think he meant it's done manually in the toolpath and then he lines up the cubes to the preview boxes of each letter

@x3shainex3 Жыл бұрын

Is it out now? Cant find it!

@joseptarrago9400 9 ай бұрын

Este LaserPecker es mejor que un laser de fibra

@romamoon414 Жыл бұрын

Awesome ❤️

@SamiLuo Жыл бұрын

thanks

@romamoon414 Жыл бұрын

@@SamiLuo you welcome sir I like your video sir ❤️

@zachcapo Жыл бұрын

when does the laserpecker 4 release? I can’t find it anywhere

@SamiLuo Жыл бұрын

It first went to crowdfunding and should be very soon available on all platforms

@panagiotiskamoutsis7461 Жыл бұрын

Where i can order to buy,I see offers for las..pecker 1,2,3 but nowhere for laser pecker 4.Any idea

@SamiLuo Жыл бұрын

It's on crowdfunding, you can back the project at: laserpecker-4-dual-laser.kckb.st/samiluo

@user-tp6ws2ul9o 4 ай бұрын

Can you engrave glass bottles full of liquor with this product?

@bentebrunsvelt319 Жыл бұрын

I like product must👍👍

@pirhaidershah5252 Жыл бұрын

Sir does it cuts plywood and acrylic upto 5mm and what is the price....?

@SamiLuo Жыл бұрын

Yes bro... for the price you can check on its crowdfunding page: bit.ly/3hqg0xc

@megashub Жыл бұрын

Can you post a cutting-specific review to pair with this awesome engraving-focused video?

@beastg4m3rz Жыл бұрын

Is it a strong enough laser to engrave in hockey puck?

@SamiLuo Жыл бұрын

hmmm it's made of vulcanized rubber right? that should be tricky... but i have never tried that material, you can ask this in the official laserpecker group to see if someone happened to try that for u

@crimsonproductions Жыл бұрын

Does this work on standard American home outlets?

@SamiLuo Жыл бұрын

It is plastic, right? Then yes, it would be no problem, just use that 1064nm laser :D

@crimsonproductions Жыл бұрын

@@SamiLuo oh I meant can it be powered by a standard outlet 😂

@FranchelleChannel Жыл бұрын

Hi, thanks for the video. If you want to put up a small business but you are budget restricted, what version of laser pecker can you recommend in terms of quality and efficiency of work?.. hope you will find my comment.. thanks in advance..new subscriber here..

@SamiLuo Жыл бұрын

Thanks for asking. I don't know what engraving size and what main material you want to do for your business though, if mostly for normal things like wood or leather then I would say the first Laserpecker generation is good enough :DDD

@deardiaryco Жыл бұрын

Can you try it on gold or silver jewelry? And gold plated silver jewelry?

@SamiLuo Жыл бұрын

😄we tried and it was great

@deardiaryco Жыл бұрын

@@SamiLuo Thank you for the quick reply! Do you know what’s the laser power? I bought Mr Carve M1 Pro with 10W power and it couldn’t engrave on my gold plated silver jewelry 😢

@dansiemens8953 Жыл бұрын

Looks amazing. What is pricing, and when is it a available?

@SamiLuo Жыл бұрын

Currently it's on crowdfunding, you can check it the link in the description

@LWBMedia20 Жыл бұрын

@@SamiLuo u can already buy it

@SamiLuo Жыл бұрын

@@LWBMedia20 :D I got to test the prototype :D

@chitung2277 Жыл бұрын

buy from where? not their official site I don't think

@LWBMedia20 Жыл бұрын

@@chitung2277 Kickstarter. It is.

@asaphroberto3152 Жыл бұрын

When will this be available for purchase?

@SamiLuo Жыл бұрын

Right now, it's at crowdfunding campaign stage :D laserpecker-4-dual-laser.kckb.st/samiluo

@ManiacRacing 10 ай бұрын

Far as I can see here, the main "upgrade" this offers is slick advertising. Costs too much for what it offers, despite the motivational music and seductive ad work.

@allinoneytshorts4045 Жыл бұрын

Hello sir I'm interested in purchasing this product... Can you please guide me ?

@SamiLuo Жыл бұрын

Hi please check out the link in the description, it's in crowdfunding stage😁

@francescaferrario4314 Жыл бұрын

Hi!!! Can it engrave silver 925? How deep? 😊

@SamiLuo Жыл бұрын

Yes you can! But... it's just engravings and I have no idea about the depth...

@alanjagroop1282 Жыл бұрын

Could it cut metal. Not wood but metal

@SamiLuo Жыл бұрын

hmmm this one can't sir

@masterfarmscannabis2362 Жыл бұрын

Can you please do a review on LaserPecker 3 nobody has really done it a good in-depth video on it

@SamiLuo Жыл бұрын

Thanks for commenting, I will try to find if have time :DD

@grettellreyes7423 Жыл бұрын

hellooo, can this be used to make engraved bar necklaces?

@SamiLuo Жыл бұрын

It couldn't be better, use that 1064nm laser :DD

@grettellreyes7423 Жыл бұрын

THANK YOUU!

@BeauteAmour12 Жыл бұрын

Where can you purchase the necklace blocks and bracket bangles etc?

@TheHelicapt Жыл бұрын

Can this engrave all metals ?

@SamiLuo Жыл бұрын

theoretically, yes! :D

@deathgaming4449 Жыл бұрын

Hi I tried to check the app in the iPhone App Store I can’t find it please let me know what app is it

@deathgaming4449 Жыл бұрын

How can I buy it

@SamiLuo Жыл бұрын

Hi, it's the LaserPecker App :D Sorry about the late reply, you can check it out at: laserpecker-4-dual-laser.kckb.st/samiluo

@clementpessemesse8208 Жыл бұрын

Does this works on Aluminium ?

@SamiLuo Жыл бұрын

yes😁

@forwarddiscipline Жыл бұрын

They really called it the pecker? That's hilarious.

@SamiLuo Жыл бұрын

hahaha.... but yeah, they called that name

@DashDrones Жыл бұрын

It's the 4th release! Obviously people love peckers

@badgerwatkins Жыл бұрын

No option to power with a battery this time?

@SamiLuo Жыл бұрын

Sorry I just confirmed with LaserPecker official again, seems it can't be compatible. LP4 needs 24v, while the previous power bank is only 12v

@badgerwatkins Жыл бұрын

@@SamiLuo Nice! Thanks for the info. :)

@SamiLuo Жыл бұрын

@@badgerwatkins Sorry I just confirmed with LaserPecker official again, seems it can't be compatible. LP4 needs 24v, while the previous power bank is only 12v

@badgerwatkins Жыл бұрын

@@SamiLuo Thank you for the update. I wonder if it would run off a 24v battery pack. Would be a nice stretch goal. :)

@theaverageguysfoodreview815 Жыл бұрын

Maybe a dumb question. If I back one am I guaranteed that they are going to send me one?

@SamiLuo Жыл бұрын

LaserPecker is such a reputable brand with many successful crowdfunding projects, I'm pretty sure they will deliver to its backers

@lastofthedesper8s Жыл бұрын

If I had the money to buy a laser this would probably be the one, unfortunately as I was ripped off by one company a couple of years ago and will, never see what I paid for, I am reluctant to spend that kind of money ever again on KS. So unfortunately, I would rather pay the full retail price and get what I paid for than get ripped off again. It certainly looks impressive though. Have a good Valentines Day.

@user-lr4wq3qk3g Жыл бұрын

Does it work on gold?

@SamiLuo Жыл бұрын

absolutely mate

@PilotSquare79 Жыл бұрын

When will this release?

@SamiLuo Жыл бұрын

Should be very soon on their website :D

@anapatyperez3934 Жыл бұрын

Where I can buy it?

@SamiLuo Жыл бұрын

Hi you can check out the description laserpecker-4-dual-laser.kckb.st/samiluo, currently, it's on crowdfunding:DD

@stevenpillay5688 Жыл бұрын

Will this engrave silver?

@SamiLuo Жыл бұрын

Yes...

@stevenpillay5688 Жыл бұрын

@@SamiLuo Thank you so much

@user-qm1yy1qq3b Жыл бұрын

10:22 wow kimstar here

@SamiLuo Жыл бұрын

hah

@rhvreramon Жыл бұрын

When will it be onsale

@SamiLuo Жыл бұрын

Hi you can check it out from their crowdfunding page: laserpecker-4-dual-laser.kckb.st/samiluo

@holgerheinrich2992 Жыл бұрын

I have problems with the fact, that established corporations soource out their costs for rnd out to kickstarter. This is not how this works, gentlemen! What's next? NVIDIA or Intel starting kickstarter campaigns for the next product?

@Dhyey.Semsons Жыл бұрын

Is this machine better or M1 ?

@SamiLuo Жыл бұрын

Thanks for asking... Honestly if you want the best metal and plastic engraving, then I think the Mr Carve M1 is still the best portable one on the market today, but if you want an all-in-one material engraving, then go to the LaserPecker 4.

@Adidasimus Жыл бұрын

Can you engrave aluminium with it?

@SamiLuo Жыл бұрын

Yep

@bradwoods371 Жыл бұрын

Can this thing engrave a company logo on aluminum tins?

@SamiLuo Жыл бұрын

Yes bro

@bradwoods371 Жыл бұрын

@@SamiLuo how about something like a bar of soap? Could it engrave a logo on that without the soap combusting?

@SamiLuo Жыл бұрын

You can back the project at: laserpecker-4-dual-laser.kckb.st/samiluo

@hitten03 Жыл бұрын

How about glass engraving?

@SamiLuo Жыл бұрын

It can, but need to paint the glass black 😁

@rcmoedas Жыл бұрын

👍🏽 3

@SamiLuo Жыл бұрын

thanks

@timd5597 Жыл бұрын

New to laser world, how hard to learn with no experience?

@SamiLuo Жыл бұрын

It's easy. I've got to say LaserPecker is the easiest laser engraer I've reviewed, their App is crazy good. You don't even have to connect to computer to use it, which is impossible for many other coreXY laser engravers.

@timd5597 Жыл бұрын

@@SamiLuo your option laserpecker or xtool laser engraver for use and overall function?