*Loved you in Eastbound & Down and Pineapple Express!*

Just the fact they’re Aussie owned and made from decent materials by people that care about what they make is all the reason to buy these carriers. Looking good 👍

I have a similar hitch bike rack. I've been using it for over two years now, and tt's a game changer for me. I got one that is rated up to 250kg as apart for my XR250, from time to time, I also use it to transport my road bike. Since getting hitch bike rack, I haven't used my 3-bike trailer, and hence sold it. Tip: I recommend using a fork brace support to prevent the front suspension from bouncing up and down. The brace keeps the bike taut and secure without compressing the suspension.

Guys, I've with you since the start but you're going to turn into an infomercial channel pretty soon...

I made mine a couple months ago. Instead of the clamp, I have 2 turn buckles that brace the carrier to the safty chain loops which are a bit further spaced apart from the hitch itself and quite strong. I made the carrier so a hinged ramp swings out and the pull on 2 sprung pins and the carrier tilts to on side for easier loading. Its also stepped up so it doesnt cut my departure angle too much and my full swing door clears it when the bike is off. 2 more turn buckles to the bottom of bike to tie it down. I also made some tethers with cable and coloured clips which look awesome. Went down the west coast of tasmania to test it out and it held up great. They are a great thing for camping

Best positive. No rego to pay. First mod, clearance lights so oncoming vehicles can see the overhang.

Great video! Very clever features on the bike bar.

I love your work keep them coming

Fella your videos I can watch them all day every day I love your work brother keep them coming brother

great for utes when filled with all the gear too..my mate carries his bike from Bundy to Finke each year behind his dual cab with one like this, great idea

Nissan looks good and sounds great taking off!

That's really well made, compared to other ones I've used 👍👍

Bought one of these a couple of months ago, love it, great bit of kit, really well made. Surprised me just how secure it was once the shim and u-bolt were in, rock solid! I’ll give you a tip for loading too, don’t do the wheel chock first, lean the bike slightly towards the rear of the car and hook the turnbuckle to the peg furthest from the car, it’ll just sit there until you can retrieve the bolt from the ramp and hook up the other turnbuckle and put the wheel chock in place, much easier. Also turn the bike on to load it, none of this pushing business 😉 Also just wanted to say great videos, particularly love the practical decision making to go with quality products and only spending money where you really need!

Rack n roll (gear and company) are brilliant. Got the alloy channel and ramp (lighter) and goes on caravan a-frame or back of ROK in minutes.

That is one cool set up

Good to see you didn't forget the r,clip

Great review 🤘🏻

I wanna get one of these but I reckon the old sierra gonna do a bit of a wheelie 😂

Man your jeep look awesome

Best 4x4 mod yet 🔥

Nice! Looks like it’s sturdy unlike others that flex way too much! I’m looking to tow a ski plus carry my bike, looking at getting a dual hitch

really good video, well done

Would recommend some clearance lights at the front sides of the bike rack (closest to the back of the car), so that oncoming cars that are trying to turn or just in general, can see how much longer the car is, and can avoid you correctly

Good bike to round up the sheep with cob 👍

Only problem I ever had was it was a little wider then my GU and it was hard to go down the narrow tracks here and there

what do you guys think of raptor coating

How do you open the back doors good idea and setup but how do you open the doors

That carabiner hook is a weak point (notice small pin holding the springed part). I changed mine with normal u-shackle for assurance

How does the club permit thing work in Victoria?

Is there a discount code for your subscribers if we're deciding to get this product?

Great Video, nice rack professional presentation. They should give you another rack and roll for the excellent presentation of their product.

Can it be installed facing the other way? So you could pull up in front of a bike shop and unload on the passenger/footpath side? Would also easier to grab some front brake when unloading.

They've got to put heaps of stress on the towbar receiver tube, would be like putting the towball an extra 2 feet further out for a trailer.

It's a good innovation. Been using a GripSport one for the mountain bikes for a few years now. How do you go with the tow ball weight? It looks like it'd be putting a bit of pressure on the hitch receiver.

Does anyone do one that pivots from the side of the vehicle when stationary? I have a LC200 with a tail gate and I don’t like the idea of pulling the bike off every time I want to stop for lunch or smoko to get into the back of the car. Something that fits into the tow hitch receiver but also swings away without having to take the bike off would be ideal. I’ve never seen one however. Do they exist?

How much does it weigh Dan?

Looks like a well engineered product and priced right You might need to move your rego plate on the patrol to stay legal Two things you don’t have to register A trailer and a bike

Great video, best rack I've seen yet. Question, could they make it and it still be safe to where l could open the tailgate And camper shell back window of a Toyota Tacoma truck? I think it would only take approximately another 6 to 8" longer, That way I could stop, get in the back the truck to sleep on a road trip without messing with anything.... Your thoughts would be Greatly appreciated. God bless.

Noice 🤟

yeew ken oath best way to add power to a troll haha

I did this to my jeep. Best mod ever. I added 40hp and 400cc by adding a bike 😂😂

can I get it one from canada

Good idea,but on the downside you have to carry fuel on or inside your 4wd (more weight) and unless you somewhere thats not a national park your cant ride anyway

R u going to do a 4wd vid with ur patrol

When’s the snorkel coming on the Patrol and the 80?

they get you stuck ....exit angle becomes bad when 4x4ing

Next mod for the patrol is gonna be an LS swap surly ahah

It's a 4x4 carrier for ya dirt bike more like!

Very tidy.

yeh there way better ive had one for ages .. big thumbs up

Illegal in NSW as the rack and bike 🏍 exceeds 60% of wheelbase..

How’s the price!😂

Doesn’t do much for your departure angle!

Sweet dreams 😴

#MATE# I MADE A BIKE CARRIER 45YEARS AGO. WITH 2 SWING AWAY UP RIGHT POSTS MUCH EASIER

Mate, your bike carrier is missing the stand under the engine to chock it up. your bike is standing in the shocks what is not very good for them. Take a rubber block or piece of wood and try. Cheers

Yeah, they are joke expensive.

Ballards bike carrier is Excellent But dood ya gotta gutless air cooled 230cc LOL 😂 Getta WR450F.. 16 to 21 mod.

only $400 more than the Ballards one

This isn't a mod. It's just putting a ramp on. You guys are really clutching at straws trying to make videos. This is standard 4x4 stuff