I don't really get why using only one hand is such a no-no. If the saw is pulling away from the user (like it is in this case), and there's no danger of kickback, then why not rest your hand and arm since you can.

Ove Bakker - I did a couple of chainsaw courses and it was emphasised on a rear handled saw don't use one handed. In terms of this operator he is at another level, he does loads of hours per year and looks to have all his limbs so ?? Thank you for your reply 🙏

Oh, for crying out loud! It's clear he was simply demonstrating for us, the viewer, how well the saw cuts just under its own weight. No pushing. No levering. Give a guy a break, critics! *I was thinking of misspelling something in this so the other grammarnazis would have something to yap at but.................

Yes,thank you!

Very true I have one always nip up the chain before cutting and take time, holding with two hands for full control of course 👍

@@GardenandForest siempre con las dos manos se agarra la motosierra

I bought the new model with metal plate..👌

@@Drumsticksmcgee Since then, I bought a battery chainsaw from Husqvarna, the 535IxP, it's amazing ! :)

2 Hands or put the saw down..

Look and assess is the most important,the professional logger mustn't have been paying attention to the tip of his blade when using one hand, a lot of cuts once you start them you are just following where the blade is angled from the start of your cut, so you should know if it is safe to one hand and if there is any obstacles in the way

It's where tip of bar is to cause kickback

Rodak ,You read my thoughts exactly. I hope he listen's

Âq

Ne A

What, if only one left?

Yes exactly, not for professional use every day and not for a very strong stormy.For the homeowner is an ideal helper!

Thank you!

40:1 Definitely the go machine will last longer👍

@@gregbrassington2120 về phía

some even suggest 32:1 (at least for mid-high tier stihl ones)...

Thank you my friend!

A stihl tata

@@malisadragomirovic4203 ha ha kralju!

Thank you very nice comment!

yes

Thank you Luca!

Thank you Aleksandar!

I just brought one home today from a local dealer here on Long Island, and yes, the high idle is part of the choke/high idle mechanism and works perfectly. I knew it was going to be a bit lean on the low speed, and the starting procedure they call for confirms this, as once you push the choke down once click after it initially pops, you pull again and it fires up at the high idle speed. If you had set the brake, release it as it picks up revs so you don't burn up the clutch drum. If you tap the throttle trigger too soon, the saw has not had enough time to build a little heat, and you'll have to really work that throttle to keep it alive. Leave it in the high idle mode for half a minute (max) and you're off to the races, albeit it's obviously still a bit lean as you can see the various off-idle stumbles in the vid. No biggie... just get the 21 splined compact driver, insert this into the low-speed needle port, and give the saw another 1/8th or so of fuel. I put two heat cycles in mine this afternoon just pissing around with it, and the first time I got it started, I blipped the throttle after maybe 5 seconds of the high idle setting, and for sure, I could barely keep it running. Next start, I left it run on the high setting for a solid 15 seconds, blipped the throttle, and it was pretty much fine. After determining this carb did not have limiter plugs (only needed the required the spline driver), I gave the low speed an eighth richer. I'll be using it tomorrow, and I'm confident a slight re-tune will get this saw perfect. Either way, their high idle feature works as prescribed, and is effective. From the user manual, after the normal instructions for the first few steps: 13. Run 20-30 seconds at elevated idle speed. 14. Pull the throttle trigger lightly to set normal idle. 15. Run 20-30 seconds at normal idle. 16. Use the product

Joshua Jollie no it good since it’s new you need to oil the chain up by reving it

Sir Theodore the lll the chain is oiled at idle. I have the same chainsaw thats in the video and it will lube the chain so much while just at idle that it drips off the bar after sitting for long enough. There is literally no need to rev the saw up like that and is bad for the saw’s engine no matter which way you slice it.

@@GoshGollie It's literally in the manual of all 2 strokes. You don't let them idle to warm up, you blip the throttle. 2 strokes are bad at "cleaning" themselves at low rpm or low cylinder temps. What he did is good, he didn't started it and went full WOT, that would indeed be a problem.

Thank you for comment!

This is the hobby saw we're testing!

Is it like 30cc?

@@mattseymour8637 Yes 35cc

Should ease up in time

My Stihl 181 is about 30 so similar size engine

Thank you Marian!

:-)

Thank you!

🤠🤠👏👍🌲

It's call an loggers tape,👍

kzfaq.info/get/bejne/j7WkaauD3Lmweac.html

kzfaq.info/get/bejne/aaiDdbN3ptbbgYk.html

No.

@@GardenandForest Okay thank you

@@fendtfarmer2d209 :-)

:-)

I would assume so, that’s how they should be made to run

All cuts should be made at full throttle on any chainsaw

Jak brousit?

kzfaq.info?search_query=garden+and+forest+sharpening

@@GardenandForest thank you

Řežu u vodního zdroje,přítok do rybníku.Jinak používáme synthetic...

Protože podle § 32 odst. 9 lesního zákona: Vlastník lesa je povinen chránit les před znečišťujícími látkami unikajícími nebo vznikajícími při jeho hospodářské činnosti. V lese je povinen používat výhradně biologicky odbouratelné oleje k mazání řetězů motorových pil a biologicky odbouratelné hydraulické kapaliny. Při ochraně lesních porostů je povinen dát přednost účinným technologiím šetřícím životní prostředí.

Thank you my friend!

The new Husqvarna saws are the future!

May be the future but still some way to go to get the small range as good as they were

@@benmeyer3962 Yes,thanks!

Stihl are good for small saws

Yes, but Husqvarna is just as good!

Made in Husqvarna factory

@@GardenandForest In the Sweden factory?

This 135 mark2 is made in china

Just like the equivalent stihl then, only with more power

1:50

I use aspen2 in mine pre mixed 50-1 longer shelf life fuel just my opinion

Thank you! No Autotune! Autotune Just thin "5" !

@@GardenandForest Thank you very much:)

@@fendtfarmer2d209 :-)

It can't be compared!

Yes my friend,i use 135mark2 for small trees he is very strong and fast for that power,and 390xp use big trees hardest cut and i called hi m 390xp big brother,and 135mark2 little brother

@@aleksandarmaksimovic8155 w

Yes,thank you!

Chill. This is a hobby/homeowner chainsaw. No need to get offended over the title. That's just the kind of saw it is.

120на2секундымедленее

Thank you for comment Alex!!!

Thank you for comment!

Thank you for comment my friend!

Non capisco il tuo commento, amico

Bulgaria 🤠👍🌲

No, not just that it goes very well, try it live and see Luca!

To many dead spots

Yes!

It needs running in as takes a few tanks at least to get more power out a saw.

Yes, the saw is running in, it's the first cutting!

4,5 ?

We will compare it soon and test the new Stihl MS 180

@@GardenandForest so why are you calling this one the best? that makes no sense. comparing it to one other saw still doesn't give you the right or the information to call one the best. what a joke.

@@farmcentralohio he just personaly thinks thats in his opinion the best whats the problem you can skip the video

@@rokjakob3702 lo that's not what the video title says there smart guy :)

@@farmcentralohio who cares in his opinion is the best whats the problem

Proč?

Thank you for comment!

@Michael Fresh Abuse of the saw and dangerous practices