Best Oscillating Multi-Tool Blade? DeWalt, Milwaukee, Bosch, Rockwell, Dremel, EZARC, Imperial
Рет қаралды 2,445,646
3 жыл бұрын10 BRANDS TESTED: DeWalt, Milwaukee, Bosch, Rockwell, Dremel, EZARC, Imperial, Fein, Bauer, and Hercules. Blades tested for both cutting speed and durability for nails and screws. I always buy all the products tested to provide unbiased test reviews. So, thank you for supporting the channel!
➡ Thank you very much for supporting the channel: / projectfarm
➡ An easy way to find past videos along with products tested: bit.ly/2FCrBpk A big thanks to Jim for putting this together.
➡ Merch: www.Project-Farm.com
➡ Click here if you'd like to subscribe: / @projectfarm
➡ As an Amazon Associate I earn from qualifying purchases.
➡ Products Tested In This Video (in no particular order):
Rockwell: amzn.to/3lYdwm9
Bosch: amzn.to/2T4c4lQ
Dremel: amzn.to/3lWLS91
DeWalt: amzn.to/3dyIDSq
EZARC: amzn.to/3nvTGzw
Milwaukee: amzn.to/3dCygwM
Imperial: amzn.to/2HhCVIh
Fein: amzn.to/35o2LmH
Bauer: www.harborfreight.com/1-38-in...
Hercules: www.harborfreight.com/1-38-in...
Videography Equipment:
Sony DSC-RX10 III Cyber-shot Digital Still Camera: amzn.to/2YdXvPw
Canon 70D Camera: amzn.to/31b5Gy0
Azden Microphone: amzn.to/34d3DLE
Go Pro Bundle: amzn.to/30XI3Zr
This video is only for entertainment purposes. If you rely on the information portrayed in this video, you assume the responsibility for the results. Project Farm LLC
@theringoffire67 3 жыл бұрын
Me whenever I need to buy a tool, “let’s see if Project Farm has done a comparison video yet”.
@DerpyPannycake 3 жыл бұрын
Hasnt done one "hmmm i dont need the tool right now but i will request it in the comments"
@vinnylewis4568 3 жыл бұрын
SAME HERE!!
@Tom-ik5sc 3 жыл бұрын
Fact
@jeffbuck2624 3 жыл бұрын
Whenever he posts a review, I decide I need to replace my existing tools with the correct versions.. I had actually been waiting for him to do a review on these though, so I'm particularly excited. I'm throwing away my old dremel blade as soon as my EZARC and Impreial blades arrive (on Tuesday).
@anaka42 3 жыл бұрын
Yup
@Pheonix19581 3 жыл бұрын
I need to just say that project farm is the literal best reviewer ever, he takes 0 sponsorships, spends dozens of hours on each video, and provides genuinely unbiased information on every product tested, it's like he got sick of not being able to find actually good information and said "Well if no one else will do it I'll do it myself" and never broke away from that mindset, I watch every single one of your videos and disable adblock and let all of the ads run in their entirety because your channel deserves it, in this world it's almost impossible to find someone who does something like this, I can't even compare this content to anything because it's just so perfect, he goes above and beyond to insure that every possible variable is accounted for, thank you so much for doing what you do!
@ProjectFarm 3 жыл бұрын
Thanks so much!
@joshuaknudsen1166 3 жыл бұрын
Agreed! Todd has so much traffic on this channel and yet still took the time to be grateful to one of my comments on a video that was posted MONTHS ago and it was a day or two after I commented. I was shocked.
@SalvianoBenicio 3 жыл бұрын
Buy a premium membership from KZfaq, then you can watch videos without the biased and bothering ads...
@BQuicksilver 3 жыл бұрын
EZarc probably wants you pay you for this vid. I was surprised to see the results.
@DFiNEdotnet 3 жыл бұрын
I couldnt have said it better myself! This is the first and only channel ive ever found, that provides genuine unbiased reviews!
@ezarctools Жыл бұрын
Best ads for EZARC, thanks to Tod and Project Farm, your benchmark test video make our years efforts on product design worthwhile in this moment.
@ProjectFarm Жыл бұрын
Thanks!
@randyhelgeson1254 Жыл бұрын
Where do I get these?
@daveperryLXXVII Жыл бұрын
Be good if you made them in starlock
@509vvildjoker 2 ай бұрын
Glad to see tool companies are paying attention to Project Farms videos. That really makes me feel like the company cares about the performance of their products. I'll be trying them out on my next purchase of oscillating tool blades.
@cakesteak 4 күн бұрын
Now you can switch factories
@austin6946 Жыл бұрын
I would love to see an updated version of this one. Oscillating blades have come a long way and Diablo makes one that I’m interested to see if it stacks up to the competition
@ProjectFarm Жыл бұрын
Thanks for the suggestion.
@kwileyk Жыл бұрын
Seconded.
@defnist47 Жыл бұрын
We need more oscillating tests !!!
@davidotness6199 Жыл бұрын
@@defnist47 Me? I'm going to make sure I have an abundance of hack saw blades for back up.
@Mikeeg0607 Жыл бұрын
Yes would love to see an update to this test!
@WarpedPerception 3 жыл бұрын
Those test rigs are so Creatively Entertaining !
@nortron4491 3 жыл бұрын
He does a good job doesn't he? Just like you;-).
@lukesalazar9283 3 жыл бұрын
@@Hardcorelactation Why do you say this?
@ProjectFarm 3 жыл бұрын
It helps to have friends like you to help with ideas, good buddy!
@lawpickinglocksmith7689 3 жыл бұрын
Your high speed camera would have documented the death of so many teeth!
@hiphopman72 3 жыл бұрын
@@Hardcorelactation if you don’t bring an alternative to an issue you are just rolling dans de la merde. "Napoléon Bonaparte"
@lenwoodcruze3594 3 жыл бұрын
Your creativity is unmatched..... Anyone else who does this is just following in your footsteps.
@ProjectFarm 3 жыл бұрын
Thanks for sharing!
@Jako1987 3 жыл бұрын
Just enough scientific appoarch so tests are repeatable by anyone. 👍
@canaicrew11 3 жыл бұрын
Yes.. no doubt
@Melicoy 3 жыл бұрын
DURABILITY is More Important than Speed !!!!!
@jasonwong9453 2 жыл бұрын
Absolutely love your work! Thank you for going to great lengths to test out these blades. Often times it is marketing hype which leads to extreme disappointment. Keep creating killer content!
@ProjectFarm 2 жыл бұрын
Thanks so much!
@ericme3317 Жыл бұрын
@@ProjectFarm please test the Diablo oscillating tool. Great reviews love your work.
@christraudt6730 2 жыл бұрын
originally i couldn't justify buying a multi tool for my limited use cases considering the blades are expensive and most of them don't last for anything other than wood. this video gave me the confidence i needed and i love my dewalt 20v XR multi tool and i only use the EZarc blades. thanks project farm for everything you do. we appreciate it more than you can imagine.
@peterbeyer5755 Жыл бұрын
You can resharpen the blade with a file!
@KB-ld7jw 3 жыл бұрын
I trust you more than any manufacturer. Always look forward to your uploads. Thanks for all the hard work.
@ProjectFarm 3 жыл бұрын
Thank you very much! This means a lot to me!
@Birch12430 3 жыл бұрын
@@ProjectFarm my dad has a company doing renovations and repairs for people and I send these videos to him so he can figure out the best products. I just watch for entertainment lol
@KB-ld7jw 3 жыл бұрын
@@ProjectFarm You're welcome sir.
@fat2slow 3 жыл бұрын
@@Birch12430 I used this guy to figure out that the trimmer line I was using was horrible
@gmc07joe 3 жыл бұрын
Great non-bias testing!!
@Asta-wl8jz 3 жыл бұрын
As a person who uses my multi-tool a lot, I appreciate you publishing this. Your channel is unbelievably helpful!
@ProjectFarm 3 жыл бұрын
Happy to help!
@TNAWWE 3 жыл бұрын
where can we get the ezarc blades at??
@blizzardesigns 3 жыл бұрын
@@ProjectFarmthe problem with your test is that the impact of the drops fractured the teeth, if you had a smaller distance between nails and less incline angle, you would get more accurate results. You can see that the teeth were chipped from impact due to the fracture angle on the teeth.
@internet_internet 3 жыл бұрын
@@blizzardesigns True, but it still does show a pretty accurate representation of how durable the blades are.
@blizzardesigns 3 жыл бұрын
@@internet_internet Maybe an accurate representation for someone who slams the blades against every nail as they cut them. This tests the toughness more than the durability, because carbide by nature is brittle, it's not meant to be slammed. If there is a smoother entry, the blades would last much longer and perform more consistently.
@microslavery 2 жыл бұрын
Thanks for this, I've owned one of those Oscillating multi-tools for a while and bought a cheap set - but never pulled the trigger on a good blade. This is very helpful information
@Paulsplaylist426 2 жыл бұрын
Thankyou so much for doing all your product review. They save me money as well as helping me choose the best products. Your proceedgers are so much better than what I see in other reviewer. I really appreciate how quickly you talk and move the reviews along and your charts, pricing, and product links make it easy to use your review to better my life. Thanks again. You deserve every positive comment you recieve.
@ProjectFarm 2 жыл бұрын
You are so welcome!
@the_onionman 3 жыл бұрын
I'm not even interested in most of these products, but I keep coming back to this channel because of the brilliant testing methods
@ProjectFarm 3 жыл бұрын
Thank you!
@Greysonszokoly 3 жыл бұрын
Same
@vincentkowski8466 3 жыл бұрын
Project Farm is better than Consumer Reports ! 👍❤️
@ProjectFarm 3 жыл бұрын
Wow, thank you!
@gpweaver 3 жыл бұрын
@@ProjectFarm Consumer Reports sold out years ago. You're the only guy we can trust anymore!
@chimpaflimp 3 жыл бұрын
@@gpweaver PF for DIY and maintenance stuff and Freakin' Reviews for gadgety things. Everyone else is sponsored, doesn't read the instructions or both.
@nigelqflarp 3 жыл бұрын
Ingenious testing Todd, your tests offer much more real world results. Keep it up!
@sijonda 3 жыл бұрын
@@gpweaver This is exactly it. It's hard to find people who review stuff independently without any financial support because of how expensive doing this stuff can be sometimes. In this case the cost of wood, nails/screws, tools, and bits. And the most expensive stuff, recording equipment and time spent.
@rickduque5799 10 ай бұрын
Just have to love this man's passion for testing tools, and this setup was very clever! EZARC should be paying attention, as after watching this video I immediately bought a 3-pack of the hard-metal blades for my Dewalt. Looking forward to testing them out !!
@ProjectFarm 10 ай бұрын
Thanks!
@EyeintheSky999 2 жыл бұрын
Another great test. LOVE to see the least expensive beats the overpriced ones. I always look to see if you have tested a tool or accessory before buying it.
@dnfinnegan24 3 жыл бұрын
This guy is the man. He’s incredibly thorough yet still keeps it super interesting. Genuine creators/people are rare.
@ProjectFarm 3 жыл бұрын
Thanks for watching!
@ThatCarGuyYT 3 жыл бұрын
When you don’t own an oscillating tool but it’s Project Farm so you still have to watch it 😅😅😅
@skunkjobb 3 жыл бұрын
I live in Sweden where many of the brands are not sold but I enjoy watching it anyway just because he does so good and clever tests with simple equipment.
@ThatCarGuyYT 3 жыл бұрын
@@skunkjobb I'm in Italy so same thing here, but i enjoy his videos too much to skip them
@BB-yj2rb 3 жыл бұрын
Same lol
@skuula 3 жыл бұрын
Greetings from Switzerland! Here too, most of these are not available, but I just have to watch anyway...
@jonbar140 3 жыл бұрын
If you do any work around the house, I highly recommend one. You wonder how you lived without it once you get one.
@jax-taposition7198 2 жыл бұрын
Newly subscribed and watched a few of your vids. Unbiased, creative reviews that doesn't cater to fanboys of a particular brand (or to the reviewer's own bias). Probably the only YT tools/ home improvement reviewer I trust. Keep up the great work!
@TheNickkirk 2 жыл бұрын
Would love to see a retest with some of the other/new offerings as well as a wood,Sheetrock, and tile version of these tests. You are always a great source of good solid info when buying these things.
@ProjectFarm 2 жыл бұрын
Thanks! Thanks for the suggestion.
@Ferracene Жыл бұрын
@@ProjectFarm I'd love to see the drywall version (if you haven't already. Still going through your videos, trying to watch them all).
@evilpeach2 3 жыл бұрын
With all the Harbor Freight products you test, you should have a lot of free lights by now lol
@ProjectFarm 3 жыл бұрын
lol. Great point! I keep forgetting to grab the free items
@TestECull 3 жыл бұрын
@@ProjectFarm Should gather 'em up and do a video on 'em.
@steveb6103 3 жыл бұрын
Lights, small tarps and the rest. Man I have a ton.
@jafinch78 3 жыл бұрын
@@TestECull A DIY light strip, light bar, trouble light and new headlights for your lawn and garden machine. That's about what I've dedicated some for.
@1979rm250 3 жыл бұрын
And tape measures!
@ralfotg2924 3 жыл бұрын
Such a simple yet professional test rig. Your outside the box thinking is exactly why I keep watching this channel.
@ProjectFarm 3 жыл бұрын
Wow, thanks!
@sauercrowder 3 жыл бұрын
Technically it was inside of a box, just a long one with no lid
@Zorlac_Jones 2 жыл бұрын
Thanks for the test! I was going to pass on the EZ ARC brand but thanks to you I'll give them a try. I considered the Diablo brand too. Plunge cuts are where these tools really shine but I try and cut metal with an angle grinder using a cutoff wheel whenever possible.
@ProjectFarm 2 жыл бұрын
You are welcome! Thanks for the feedback.
@americafirst2785 Жыл бұрын
This blades are not very good for cutting metal,use a grinder,hacksaw or reciprocating demolition saw blade and less expensive.
@nole8923 Жыл бұрын
Angle grinders weigh a lot more and many times you don’t have enough room for an angle grinder. Like if you are sistering rafter beams and you need to cut the roofing nails poking through the ceiling. Many many times there just isn’t enough room for an angle grinder or it’s too heavy to use and your only options are a Dremel or an oscillating tool.
@evilutionltd 3 жыл бұрын
That 1st test was like an updated version of a Pinewood Derby.
@ProjectFarm 3 жыл бұрын
lol. Yes, it was pretty intense testing them to compare their times!
@ElectricalExistence 3 жыл бұрын
When i was in the cub scouts i won 3rd place in the district pinewood derby car competition...
@DaDaDo661 3 жыл бұрын
@@ElectricalExistence Hey it's me, the kid who won first place that day. Better luck next time
@ElectricalExistence 3 жыл бұрын
@@DaDaDo661 pfft. What car did you use?
@electronicsNmore 3 жыл бұрын
Wow, that was a brilliant testing jig. Thanks for all the time you put into your videos to help others make the right buying decisions! A++
@ProjectFarm 3 жыл бұрын
Electronicsnmore, thank you very much for the positive comments!
@ernestpaul2484 3 жыл бұрын
The effort and well thought designs, along with the pretest planning that you put into these tests are outstanding. But then again, you do have a farm.
@lewiemcneely9143 3 жыл бұрын
@@ProjectFarm I'll 2nd that A-PLUS!
@edrees3874 3 жыл бұрын
The test is flawed. Carbide is incredibly sensitive to blunt slamming, as is what happens when each fastener is cut. That wasnt really wear we saw on the teeth, it was mostly fracturing.
@michaellamb9145 3 жыл бұрын
@@edrees3874 I agree, you can see the impact broke the teeth.
@darink5970 2 жыл бұрын
Thanks so much!! You have made my life as a contractor easier with your recommendations and saved me from wasting money on garbage tools and accessories. This channel is just the best. Again, thank you so much!!
@ProjectFarm 2 жыл бұрын
You are welcome! Glad to hear!
@barefootbob1269 2 жыл бұрын
Dude love your test videos. You put a lot of thought and work into them. Thank you!
@ProjectFarm 2 жыл бұрын
Thanks and you are welcome!
@somestuffithoughtyoumightl6985 3 жыл бұрын
Your editing is masterful Sir, Bravo You could make more $$ by wasting our time rambling on or posting normal speed prep, but no, you get right to the point and I rarely need to skip ahead. Easily one of the most useful channels on YT
@ProjectFarm 3 жыл бұрын
I appreciate that!
@dustinhiggins710 3 жыл бұрын
Big facts!
@ProjectFarm 3 жыл бұрын
Publishing the video a day early to see Sunday works out better for everyone. Please let me know your preference. An easy way to find past videos along with products tested is this project list bit.ly/2FCrBpk A big thanks to Jim for putting this together. Looking forward to reading your comments and your future video suggestions! Best regards, Todd Blades tested:
@longshot789 3 жыл бұрын
Putting in my request for a video on "Best Day to Post Best Equipment Videos"
@The_RC_Guru 3 жыл бұрын
I’m in the minority but work all odd hours and 7 days a week. Sometimes up to work at 10pm sometimes 10am. Truck driver. But am subbed and notifications on. I watch em all buddy.
@Nando_ 3 жыл бұрын
wow! you did pretty soon the video that I've suggested ❤️❤️
@johnwallace9755 3 жыл бұрын
Very good day and hour also in Europe, its 7pm now. I had to double check the calendar, you made me feel like its monday!
@Tfaonc 3 жыл бұрын
Very few of my subscriptions publish on Sundays. So if you do you'll be top of my subscriptions feed every Sunday. That's something anyway.
@stevenfoster5737 2 жыл бұрын
Great job! Once again you are saving me a lot of money! Your channel has become my go to and I'm working my way through the older videos and becoming more informed each time. You are performing a public service and I truly appreciate the guidance you've given me.
@ProjectFarm 2 жыл бұрын
Thanks so much!
@jasonwong9453 2 жыл бұрын
Thanks for conducting these tests to illustrate the longevity in different scenarios. Keep up the outstanding work!
@ProjectFarm 2 жыл бұрын
Thanks, will do!
@ThisTall 3 жыл бұрын
This is great. I never cut metal with mine but I find they’re almost useless in wood as soon as you nick metal or concrete. Would love to see this exact test again cutting through 1” hardwood and softwood dowels.
@ProjectFarm 3 жыл бұрын
Thanks so much! Thanks for the suggestion.
@sarahandtim332 3 жыл бұрын
Add how dull after cutting sheet rock multiple times, make this a series
@JB-wq6yi 3 жыл бұрын
I don't make a habit of cutting metal except for aluminum or copper, but sometimes you have no choice, and it hurts like hell to spend $15 to cut through a few nails.
@djjazzyjeff1232 3 жыл бұрын
@@JB-wq6yi Yeah it's best to avoid doing it if you can, but as I'm sure you know, that's not always an option.
@syfodias-jedimaster 2 жыл бұрын
@@djjazzyjeff1232 what's a other option??
@themagitechie9955 3 жыл бұрын
"Least expensive" "made by DeWalt". Wait, What? Never thought I'd hear those words in the same sentence...
@bassnazi4713 3 жыл бұрын
Yea gotta watch some of the inexpensive dewalt choices though...bought a set of impact bits for under $10 at lowes for black friday and they all are corroded as can be, all the ones I haven't even taken out of the box they came in. The Hercules bits I bought actually seemed to maintain their coating pretty well, but the more expensive dewalt bits seem to do great by comparison to their cheap sets.
@orijimi 3 жыл бұрын
Pretty common, actually. DeWalt doesn't try too hard to be a premium brand.
@1pcfred 3 жыл бұрын
@@bassnazi4713 corrosion is a funny thing. You might clean those bits up and they may not corrode from then on. That'd be because of the production of black iron oxide. Which is corrosion resistant itself. There's different kinds of rust. There's the reddish orange stuff and black oxide. But then again you could clean them up and they could get the red cancer too. Check out the iron pillar of Delhi. It is protected by black iron oxide.
@weirdyoda04 3 жыл бұрын
That’s because for some reason he used the titanium blade for dewalt instead of the carbide like he did for all the other brands. I think the dewalt carbide is $20
@hammyboigaming904 3 жыл бұрын
Well the slightly more expensive dewalt blades actually are much better
@theophilusconnor 10 ай бұрын
Another great test! You are the man for creating these innovative, well-executed, exhaustive tests.
@ProjectFarm 10 ай бұрын
Thank you very much!
@JB-tc8el 2 жыл бұрын
Fantastic to see really well setup tests that are as consistent as practically possible, thank you!!
@ProjectFarm 2 жыл бұрын
You are welcome!
@jbomb889 3 жыл бұрын
I’m fairly certain we have experienced a first with this video....... “The second most expensive blade in our test..... sold at harbor freight” That made me laugh... But for real I’ve been here since you were less than 100k and I’ve never missed a video. Hands down one of the only channels I drop what I’m doing to watch when you post a new video. Thank you, you’ve saved me a lot of money over the last few years!
@ProjectFarm 3 жыл бұрын
Glad to hear! Thanks for watching!
@willallison1136 3 жыл бұрын
I had to rewind to make sure I heard him correctly about the Harbor Frieght price.
@donmckee90 3 жыл бұрын
Is there a video for best oscillating tool? If so please share
@senseisecurityschool9337 3 жыл бұрын
I've noticed Harbor Freight has started selling more expensive, better quality options along with the cheap options. See the PF video on step drills for example.
@sergeant_cross_ 3 жыл бұрын
Can you explain that for non-US viewers? Is Harbor Freight one of the cheaper hardware stores in the United States?
@cobra202156 3 жыл бұрын
Man you spend so much time engineering and working on this stuff. I very much appreciate what you do. I just want to thank you for spending so much time out of your life to do this for us viewers. Thank you
@ProjectFarm 3 жыл бұрын
I appreciate that!
@vankzeng5161 2 жыл бұрын
【FREE Oscillating SawBlades】We are offering FREE adult toys to people who would like to try out our products. All we ask in return is to provide a 4 or 5 stars review on Amazon after you’ve tried it! We will send you the money via PayPal to purchase the item on Amazon, and you test it and make the review! It's as simple as that! We have the highest quality and largest selection of adult toys that you won't get enough of! Reply Yes to proceed.(US Only)
@vankzeng5161 2 жыл бұрын
@Yeah Right 【FREE Oscillating SawBlades】We are offering FREE adult toys to people who would like to try out our products. All we ask in return is to provide a 4 or 5 stars review on Amazon after you’ve tried it! We will send you the money via PayPal to purchase the item on Amazon, and you test it and make the review! It's as simple as that! We have the highest quality and largest selection of adult toys that you won't get enough of! Reply Yes to proceed.(US Only)
@marke3623 2 жыл бұрын
This has got to be one of the best channels on KZfaq. Here I am watching this video… again. I could skip to the end and just review the results, but I’m a nerd and enjoy watching the tests. Thanks for the great content PF!
@ProjectFarm 2 жыл бұрын
You are welcome!
@Fauxreigner 2 жыл бұрын
Would love to see a version of this for starlock blades. Thanks for all of the time and effort you put into these videos; you're my first stop when I'm considering a buy.
@ProjectFarm 2 жыл бұрын
Thanks for the suggestion.
@ThacMan 3 жыл бұрын
EZARC = Sold Milwaukee's blade product manager = Fired 😬
@bobsum1745 3 жыл бұрын
Wrong. Short lasting blade, more sold. Bonus for manager.
@Niznuts123 3 жыл бұрын
@AlexisBubba15 agreed. I’m all Milwaukee. But after using their multi tool blades, went to using imperial blades. Other than that though, Milwaukee has been solid in pretty much everything else. But they are pricey
@djjazzyjeff1232 3 жыл бұрын
@AlexisBubba15 That's why competition is the best thing for the consumer. The other companies are forced to step their game up!
@chrisstewart4823 3 жыл бұрын
@AlexisBubba15 Fan boys are laughable. People who like saving time and money own every color tool.
@theremodelerslife 3 жыл бұрын
@@Niznuts123 Milwaukee blades are made by Imperial.
@sensibleblue 3 жыл бұрын
OMG. This channel is outstanding for DIY’ers. The test rigs, all the effort to equalise the test conditions etc. Honestly this channel deserves an award. Great, clear information, unbiased well illustrated with simple charts. Simply the best tool testing channel on the planet. Congratulations
@AlbertLebel 2 жыл бұрын
He really does a fantastic job. May be a bit fast paced but he is thorough.
@FlushtheSystem 2 жыл бұрын
As always my friend BRAVO, BRAVO. The testing, the equal and fair comparisons, the varieties of brands, and last but not least the Testing Apparatus's you come up with, BRAVO! Thank you for your work. Patreon Well Deserved.
@ProjectFarm 2 жыл бұрын
Thanks and you are welcome!
@devincherberg5516 10 ай бұрын
I appreciate all the work you do for these videos, it’s truly amazing and you help so much with all your useful information!! Thank you thank you!!!
@ProjectFarm 10 ай бұрын
Thanks and you are welcome!
@sirluke7 3 жыл бұрын
Consumer Reports vs. Project Farm : No contest... Consumer Reports has nothing over Project Farm! Todd I hope your channel continues to grow and hope you get as much satisfaction out of doing these tests as much as the rest of us enjoy the huge benefits. You should run a couple more ads during your videos. It would be good for you and the your great product!
@88SherryLynn 3 жыл бұрын
That's because Project Farm is unbiased and unpaid. Can't say the same for Consumer Reports
@ProjectFarm 3 жыл бұрын
Thank you!
@GrnXnham 3 жыл бұрын
@@88SherryLynn Consumer Reports is also unpaid. They do not accept money from advertisers. They stay alive with donations from consumers. Unbiased? Can't prove that one way or another with any reviews.
@GrnXnham 3 жыл бұрын
@ Seriously? The Suzuki debacle? That review that said that Suzuki's tipped over was more than 30 years ago. You can't do better than that?
@lukasrohrmoser3213 3 жыл бұрын
That test rig is f*cking genius
@ProjectFarm 3 жыл бұрын
Thanks and thanks for watching.
@bubbafudpucker397 3 жыл бұрын
Todd is a genius!!!
@carlclouseriii8519 3 жыл бұрын
I love how he takes a very scientific approach to his testing. He removes the human factor and it shows true and unbiased test results. I have referred many friends to check these videos out
@fxm5715 3 жыл бұрын
I wonder if the shock of each drop was a significant contributor to the tooth damage, though. it doesn't seem like a reasonable thing to expect of any cutting tool, other than a chisel. Harder teeth that might otherwise hold up very well to prolonged cutting might get broken from the repeated impacts. I certainly don't slam my reciprocating blades (or any other) into a surface like that.
@felipereyes466 3 жыл бұрын
oi watch your mouth mate!!!!
@wendybyrne1301 2 жыл бұрын
I always enjoy watching your videos. Thank you for being so careful and creative with your test designs!
@ProjectFarm 2 жыл бұрын
Thanks and you are welcome!
@tonkatoytruck 2 жыл бұрын
Used your link for new EZARC blades. I smoked a HF blade cutting brad nails and wedges yesterday in no time flat. Thanks for all your hard work.
@ProjectFarm 2 жыл бұрын
You are welcome! Thanks for sharing.
@jacobharryman822 3 жыл бұрын
I would love to see sockets on here. Maybe have a rig with a welded bolt and see how much torque it takes before the socket rounds off the bolt or the socket breaks. I love your videos and have been watching for a long time. Just found out recently you were local when I saw a shatto milk bottle!
@ProjectFarm 3 жыл бұрын
Thanks for the video idea. Thanks for watching!
@gg-gn3re 3 жыл бұрын
Plasma torch is my favorite socket for removing nuts
@iamdarkyoshi 3 жыл бұрын
@@gg-gn3re "Can't be tight if it's a liquid"
@carlclouseriii8519 3 жыл бұрын
Iirc ave already did that video
@caffina5882 3 жыл бұрын
Sockets would be sweet. Like a 7mm, 12mm, and a 18mm across various brands.
@CharlieBasta Жыл бұрын
You have become my standard go to for these tests. You are very thorough and I appreciate you showing how the tests are done. Thank you
@ProjectFarm Жыл бұрын
Thanks and you are welcome!
@erikpartida884 3 жыл бұрын
PF is honestly on a different level. So easy to follow and tests are straight forward, and fair. Thanks for all the tests.
@ProjectFarm 3 жыл бұрын
You are welcome!
@MrMagoo-no5lb 3 жыл бұрын
I love when you say "It claims to have XXXX" or the more infamous "were going to test that" 🤣 I love these videos. If I'm in the market for something, I always search your videos first. True, accurate and informative, I trust your reviews! So wonderful. I wish I could spend a day at your shop, as that would be a wealth of knowledge I would gain more important than any information I could gain elsewhere. Great job brotha. Thanks for everything you do!! Fan for life 🙏🙏
@ProjectFarm 3 жыл бұрын
Thanks!
@lemonjoy19 2 жыл бұрын
This is brilliant. Just got my first oscillating tool. Ive used it a ton. This is amazing info and superb testing. Most of my aftermarket blades are Rockwell. Using the Skil blades so far, and havent met a nail thats stopped me yet. Thank you for this!
@ProjectFarm 2 жыл бұрын
You are welcome!
@shavetail9429 3 жыл бұрын
I think I speak for many others in that I wish I could give you more then 1 thumbs up!!!!!!!!
@ProjectFarm 3 жыл бұрын
This means a lot to me! Thank you!
@samnottheotherone4363 3 жыл бұрын
That's what comments are for
@rickyanke9407 3 жыл бұрын
You don't have two thumbs?
@shavetail9429 3 жыл бұрын
@@rickyanke9407 Not since the 4th of July! 😂
@danielguy1891 3 жыл бұрын
Agree!
@austingutierrez2709 3 жыл бұрын
Can we just appreciate the amazing quality of this channel and his experiments are. I’ve used his videos to buy at least 3 different items and they’ve all worked great !
@ProjectFarm 3 жыл бұрын
Wow, thank you!
@advocatus360 3 жыл бұрын
Same. I'm moving from Gorilla glue to Titebond III. I also love my Zircon studfinder
@johnlandis5889 3 жыл бұрын
I've bought Terex duct tape and A TEMO STEP DRILL BIT
@irishgirl3407 2 жыл бұрын
Those are the best tests I've seen for any tool! Thank you for the time it took to do this.
@ProjectFarm 2 жыл бұрын
You are welcome!
@neitzsche5150 2 жыл бұрын
Outstanding work, PF! Your set ups are ingenious and you give us an objective, non-biased result.
@ProjectFarm 2 жыл бұрын
Thank you!
@wuzbomb 3 жыл бұрын
Oh. A day early! Made my Sunday!
@ProjectFarm 3 жыл бұрын
Thank you very much!
@richardcook1987 3 жыл бұрын
WHAT A GREAT SURPRISE!
@dalepremo3695 3 жыл бұрын
I think I do like the Sunday posting a little better. Either day works OK, but there seems to be a little more time on the weekend to watch them. Thank you for all the hard work you do in these reviews - they are priceless!
@ProjectFarm 3 жыл бұрын
Thanks for the feedback. You are welcome!
@donp1088 Жыл бұрын
In my ‘world’, whenever I intend to buy a product, I always check your site for your analysis and evaluation. Your work and service to the public is without equal. 🤔👍
@thomask4836 2 жыл бұрын
Thank You So Much for all the thought that goes into designing objective and practical testing in all of your videos.
@ProjectFarm 2 жыл бұрын
You are welcome!
@smiley3303 3 жыл бұрын
Just amazing. I never would have expected the EZARC to do so well. You saved people real money on this one!
@ProjectFarm 3 жыл бұрын
Thanks! Thanks for the feedback.
@syfodias-jedimaster 2 жыл бұрын
Can u re upload link for ezark
@Scar_117 3 жыл бұрын
Project Farm never fails to amaze me by the sheer level of thuroughness and how indepth the tests are.
@terrmaso 2 жыл бұрын
As always, you are my go to for finding out which products perform best 👍 I purchased a pack of the Rockwell blades as they were on sale. This was about a year ago and I am not overly impressed. Now I know which to buy next time. Thank you for what you do.
@ProjectFarm 2 жыл бұрын
You are welcome!
@drew5334 2 жыл бұрын
I would love to see a test of the multi-tool blades on clean wood, as well as wood with nails, similar to how you tested reciprocating saw blades! Awesome stuff!
@ProjectFarm 2 жыл бұрын
Great suggestion! Thank you.
@JM-yx1lm 3 жыл бұрын
Damn, I would have never thought of setting up test rigs this way. Wow, youre a super creative dude!! Nice job!!
@ProjectFarm 3 жыл бұрын
Thanks!
@mirceamarianovstoian9029 3 жыл бұрын
Sir, you have all my respect. Your work is thorough and hard, but the results are extraordinary. I put my hat in front of you.
@ProjectFarm 3 жыл бұрын
Wow, thank you!
@tylerjames1716 3 жыл бұрын
I put my hat on top of you
@Tortuga89R 2 жыл бұрын
Your videos are top notch!!!! You make it look easy yet very informative and entertaining! Lots of great work on the setups for the tests and great video overall! Thank you sir!
@ProjectFarm 2 жыл бұрын
You are welcome!
@orandaadnaro 2 жыл бұрын
Now that's a review! Compelling to watch with a definitive outcome. Well thought out and well done!
@ProjectFarm 2 жыл бұрын
Thanks!
@farleybetts392 3 жыл бұрын
Can we all just appreciate the effort that he puts into these videos for a second, probs one of the best tool review channels out here
@ProjectFarm 3 жыл бұрын
Thanks so much!
@aerobiks9882 3 жыл бұрын
I love that you reply to many of your comments. Engaging with the subscribers really helps bridge the gap between youtuber and viewers. Keep up the work! Love the information you provide as well, I'm always telling my dad and boss what tools are best and they have more experience using brands but you help bring the best.
@madmike6254 Жыл бұрын
Good testing. Your channel and all you do are much appreciated.
@ProjectFarm Жыл бұрын
Thanks so much!
@Gimblevalve 2 жыл бұрын
Thanks for posting ...you deserve the 1.5m views for a comprehensive test 👍👍
@ProjectFarm 2 жыл бұрын
Thanks!
@Smaptastic 3 жыл бұрын
I'm going to just start commenting on every one of your videos to increase your metrics because you definitely earn it. Your videos are some of the most practically useful things on KZfaq and your testing methods are inventive and practical. Great work!
@ProjectFarm 3 жыл бұрын
I appreciate that!
@xn7331 3 жыл бұрын
i can't think of any other channel that consistently has such high quality content that requires so much setup and preparation. you are constantly impressing us with the amount of time, effort, and money you obviously put into each video!!
@DraLaRoc Жыл бұрын
Thank you sir. Using your Amazon link, just added the EZARC blades to my cart. Thank you for putting that test project together.
@ProjectFarm Жыл бұрын
Thanks and you are welcome!
@spacep0d 2 жыл бұрын
Great video! Thanks for not adding background music. Super useful. Good controls.
@ProjectFarm 2 жыл бұрын
Thanks!
@ttogreh 3 жыл бұрын
Sincerity, enthusiasm, and humility. You remind me that things are not so bad, and that we can get through this. I know it's a product testing video, but it is also a lot more.
@ProjectFarm 3 жыл бұрын
Thanks for watching!
@danieldietsche2954 3 жыл бұрын
Appreciate your attention in trying to remove most of the variables, to produce seemingly unbiased results. Including the prices, manufacturing country, and Bar graphs helps also. Great job!
@Deluxe5337 Жыл бұрын
The amount of work you put into these tests is amazing. Love your page.
@ProjectFarm Жыл бұрын
Thank you!
@RockerMtl1 2 жыл бұрын
Wow amazing original tests !! Thanks for an awesome video !
@ProjectFarm 2 жыл бұрын
You are welcome!
@michaellinner7772 3 жыл бұрын
Fun fact of the day, oscillating saws were developed to remove casts from broken limbs without cutting the person's arm or leg after it's been healed. That's due to the flexibility of our skin which moves along with the small back and forth movement of the blade of the saw.
@ProjectFarm 3 жыл бұрын
Thanks for sharing.
@noahway13 3 жыл бұрын
I was one of the first to use it. (had it used on me) I broke my arm as a kid. The doc showed me it would cut the cast, but not his hand. I was still very afraid it was going to cut me.
@michaellinner7772 3 жыл бұрын
@@noahway13 that's how I found out about it too in the early 1970s.
@robb9702 3 жыл бұрын
@@noahway13 Different type of technology on those dremels vs construction dremels. I personally know 2 guys that nearly lost a finger from a oscillator/ multi tool. I've been bitten a few times, luckily not as severe as theirs.
@denismilic1878 3 жыл бұрын
Haha it is true, my first contact with the oscillating saw was in my teenage days when doctors sawed the helmet from my head after a motorcycle accident. I never was exposed to such a level of noise like that time. The feeling was like you put your head in the jet engine. These were fun times.
@Sambenmaggie 3 жыл бұрын
I dont even need a multi tool blade, I just love how your videos are made. Your tests are always well thought out and methodically performed and reported!
@ProjectFarm 3 жыл бұрын
Thank you very much!
@nikkicarlson8511 2 жыл бұрын
That was some fantastic testing, I was thinking perhaps with the carbide blades. As carbide is very brittle the slamming down into the next screw or nail is not ideal, but it doesn't change the results given the uniform test methodology, they were all subject to the same conditions. Love your work as always!
@ProjectFarm 2 жыл бұрын
Thanks!
@keithtynan7469 Жыл бұрын
Literally the first thing I did after deciding I needed to buy blades was to see whether you had a video. And you did. You’re a gem, and that’s a fact.
@ProjectFarm Жыл бұрын
Thanks!
@charleskaylor149 3 жыл бұрын
Buddy this is some of the best content on KZfaq! I really enjoy seeing what you come up with as a test rig for different tools or products. Really clever, and I know it takes a lot of time and resources to do this. Good job man. I’m a fan!
@ProjectFarm 3 жыл бұрын
Thanks 👍
@Drewsky840 3 жыл бұрын
I don't know how you come up with all these perfect ways to test everything fairly but you do everytime and it's awesome! I always have your reviews in my head now when shopping! You are doing a great thing! Thank you!
@ProjectFarm 3 жыл бұрын
Thank you very much!
@SpinStar1956 Жыл бұрын
Thanks so much. Love your knack for setting up these tests!😊
@ProjectFarm Жыл бұрын
Thanks and you are so welcome!
@rottiuree Жыл бұрын
Your testing methods are fabulous! Thank you for helping pick the right tool!
@ProjectFarm Жыл бұрын
Thanks and you are welcome!
@dans_Learning_Curve 3 жыл бұрын
I see many people talking about the impact the cutter experienced in between the nails. What about another no gap test? No slamming of the cutter teeth. As always, an excellent job!
@ProjectFarm 3 жыл бұрын
Thanks for the suggestion. Thanks so much!
@imadecoy. 3 жыл бұрын
I don't think it was a big factor after seeing so many blades fail on the first drywall screw.
@ccadama 3 жыл бұрын
@@ProjectFarm Hey Todd. While I'm sure many people mean well, I understand that you're trying to keep the testing as consistent as possible. Yes, people who use a oscillating tool will move the blade back and forth using as much of the blade as possible to extend blade life. But your testing still gives us an idea of the hardness of each blade and its ability to stand up to the cutting of the hardest typical stuff (nails and drywall screws) we'd use it for. As for which day, Sundays are a bit better for me and I set your channel for all notifications so I don't miss your new videos. Thank you a I hope you and your family stay safe and well.
@adamcramm 3 жыл бұрын
These blades actually cut through nails more efficiently at slower speeds with less damage caused to the blade. When I’m cutting nails with my fein, I put the speed setting at 1 and can cut dozens of nails with no damage done to the blade.
@willysnowman 2 жыл бұрын
heat kills hss
@iggysixx Жыл бұрын
Thx. That makes a lot of sense, actually. I think the heat from the friction might be tempering the steel (removing the hardening)... at which point it becomes soft steel saw teeth vs hardened steel nail. (If that's the case; cooling the saw blade in water in between cuts could help too.) Thanks again! Definitely going to try this :)
@Obshowersyndicate Жыл бұрын
My fein pos speed control took a shit I barely use mine they don't make them like they used to
@iggysixx Жыл бұрын
@@Obshowersyndicate You should be able to order a new part directly from Fein, man. They should have parts in stock for almost every model power tool they ever manufactured (even ones from decades ago).
@jimk5307 Жыл бұрын
I had the same thoughts on the hole saws. Over-cooking the grits. 😀
@VanwithTim 2 жыл бұрын
Perfect. Was just looking at all the different brands then figured... I bet Project Farm has a video on it! Never disappoints! Thank you!
@ProjectFarm 2 жыл бұрын
You are welcome!
@ianbusche1471 3 жыл бұрын
When’s the windshield wiper UV test coming out?? It’s been a year I think
@ProjectFarm 3 жыл бұрын
You are right. It'll be ready soon. Thanks again!
@EM-fi2qg 3 жыл бұрын
Right on. I was actually thinking about getting new wipers yesterday, but then I thought, I should wait until it starts raining because the wipers will probably rot in the meantime. I'm in SoCal, so it might be another month before it rains. As a side note, and maybe a prediction, the best wipers I ever owned were the Motorcraft brand. Lasted 4 years, from Texas storms, through Colorado winters. Finally failed when I got back to SoCal.
@snafuequals 3 жыл бұрын
@@EM-fi2qg I bought the Aero blades August 11th, they're hard as rocks now. St. Louis weather, so pretty much a mixture of everything.
@davisev5225 3 жыл бұрын
@@EM-fi2qg Bosch Aerotwin here. Best blades I've ever owned. I live in the CA desert, and they hold up for 2-3 years before I decide to replace them, and even then, I'm only replacing them because I see a couple streaks - they could still safely clear the rain.
@tacocin 3 жыл бұрын
PIAA Silicone for me!
@e2622 3 жыл бұрын
I really appreciate your attention to detail, enthusiasm, and contributions overall. Awesome job with this comparison. I never get tired of your videos.
@ProjectFarm 3 жыл бұрын
Thank you very much!
@bluedeath4888 2 жыл бұрын
Wow Best Product Review ever! So much work and so much details.
@ProjectFarm 2 жыл бұрын
Thanks so much!
@JonnyDIY 2 жыл бұрын
Was gonna buy some new blades, but last minute thought Id better check with the Project Farm! Thanks 💕👍
@ProjectFarm 2 жыл бұрын
You are welcome!
@TestECull 3 жыл бұрын
My take from this is to remove fasteners before trying to shave things. It's hell on blades and them blades ain't cheap.
@ProjectFarm 3 жыл бұрын
Thanks for sharing.
@howardosborne8647 3 жыл бұрын
TestECull,I agree with you. This just about the worst cutting scenario for an oscillating blade. All the cutting action is focused on a very small proportion of the cutting edge. 1 mm ultra thin grinderette disc would last for ages on these sort of cuts and far less expensive. But as you say, taking the fixings out would be preferable.
@andyh9382 3 жыл бұрын
Amazon has generic blades in value packs for less than a dollar each. They’re pretty good, if you burn one up just grab another!
@pjfsr7024 3 жыл бұрын
I rarely use my dremel for this, I use a grinder and cutting disk, or a reciprocating, saw .
@1pcfred 3 жыл бұрын
If you're cutting the bottom of floor trim to install flooring removing anything buried in the trim is not practical. And that's what these multi-tools end up doing a lot professionally. It's pretty much all they're good for.
@Formerlywarmer 3 жыл бұрын
I've been wanting one of these tools for occasional use at home in my shop and now I know what blades to get...thanks and as always GREAT work on providing us all real and useful information.
@ProjectFarm 3 жыл бұрын
You are welcome!
@jialixx 2 жыл бұрын
I am shopping for my first oscillating multitool, this video along with the one for the tool itself helps me a lot. Thank you! Again!
@ProjectFarm 2 жыл бұрын
You are welcome! Glad to hear!
@surveyor1515 Жыл бұрын
Your attention to detail is remarkable! Great job as usual, Project Farmer 🤝
@ProjectFarm Жыл бұрын
Thanks!
@jhoover8734 3 жыл бұрын
Definitely one of the best channels on KZfaq. Good tests, thorough results, and to the point with no BS fluffed in. Also like that the country of origin and price is stated for each product. Thank you for the effort put into this series.
@ProjectFarm 3 жыл бұрын
Thanks so much!
Best Oscillating Multi-Tool? FLEX vs Milwaukee, DeWalt, Makita, Ryobi, Ridgid, Hart, Metabo, Warrior
Project Farm
Рет қаралды 1,5 МЛН
Project Farm
Рет қаралды 2,3 МЛН
Project Farm
Рет қаралды 1,4 МЛН
The Honest Carpenter
Рет қаралды 677 М.
Top Trending
Рет қаралды 7 МЛН
Yeshu Rey
Рет қаралды 43 МЛН