Best Right Angle Impact Wrench🔧🔧. Milwaukee OR Kobalt??

Рет қаралды 13,442

Күн бұрын

Episode # 251
This video and all my videos are filmed in 4K so turn up the screen resolution!!
In this video I take the Milwaukee M-12 Fuel Right Angle Impact Wrench and Compare it to the Kobalt 24V Right Angle Impact Wrench. I go over all the spec's and check the weight, and the RPM'S.
🔊 Want more? Check out these links:
💥 • "NEW" Ryobi 18V HP 4 M...
💥 • Amazon's Brushless 💥Ki...
💥 • Kobalt X.T.R. VS Makit...
💥 • Job Site Fans Which on...
🔨 Tools and Materials: --- Amazon Affiliate Links !!!
Here is the link for a Kobalt 24V 4ah battery:
www.amazon.com/gp/product/B01...
Here is the link for the Kobalt 24V 2.0ah battery:
www.amazon.com/gp/product/B01...
Here is a link for a Milwaukee M-12 Stubby impact:
www.amazon.com/gp/product/B07...
Here is a link for a double pack of M-12 battery's:
www.amazon.com/gp/product/B00...

Пікірлер: 52

@alexe3688 3 жыл бұрын

Man I got that Kobalt for 79usd and part of the bmsm. The next week it was 149usd and has stayed there.

@kongxiong6005 2 жыл бұрын

I bought a Milwaukee fuel 1/2 inch mid torque with 5.0 battery yesterday for $220...today it's $369. I was like Dayamm..

@jordanalexander615 2 жыл бұрын

If you want a mean impact the Makita XTG is insane for it's size. But also expensive

@Jarco101 3 жыл бұрын

I was waiting for this video so bad

@bondscalper 3 жыл бұрын

Dude . I havnt seen you videos in a while . But WOW you look good !!! You look like you lost weight!!! Keep on rockin and I promise Ill watch your videos more.

@Impact-OG 3 жыл бұрын

Well thank you, its because of chasing all these dam kids around hahaha, I have been posting i took 2 weeks off after the baby was born but I try to post every week. One video if not 2.

@haroldjones12 3 жыл бұрын

there's nothing wrong with the kobalt lol all impacts do that when its either stopped moving or too much for it to complete

@mike_t_007 4 ай бұрын

What battery did you have? That makes a difference

@Dale37 3 жыл бұрын

Nice video, the anvil in the Kobalt was skipping. It wasn't broken, just something that happens when impacts are put in a high load situation.

@vernonhall9262 3 жыл бұрын

Kobalt makes awsome stuff man I have the 1/2 impact The drill Impact driver An goin to get this impact ratchet today Love my kobalt tools

@Impact-OG 3 жыл бұрын

Yeah I cant wait for the new stuff to come out the the Cordless band saw, or the 8.0ah battery. thanks for watching

@kuchiefsdabomb 2 жыл бұрын

I just invested into the 1/2 inch XTR Impact and got the this impact ratchet free. Im diving in and getting the whole drill, impact, saw, light kit soon.

@Impact-OG 2 жыл бұрын

@@kuchiefsdabomb yeah I really like Kobalts stuff, did you see that kit is now on sale for $229. and it use to be what $399?

@seatownchris206 Жыл бұрын

Can't believe you weren't hand tightening those lugs before using the impact on em. Guess that's why your handle includes "breaking stuff"

@mike_t_007 4 ай бұрын

How do you like that Kobalt?

@grider8344 2 жыл бұрын

Great vid, I just watched the half in ko vs milw. Kobolt smacked it but I think the tool must have been off or something after looking at this.

@dannysautorepair 2 жыл бұрын

Great video

@travelinjavelin 2 жыл бұрын

i liked both tools but from what i saw i feel it was slightly biased towards the kobalt tool also the 2 amp battery vs 3 amphr would have liked to have seen a even match in the battery packs

@corin164 2 жыл бұрын

Both impacts are impressive. However, with equal work (i. e. wattage) the difference in voltage makes the lower voltage impact use more current (i. e. Amps). More amps results in higher heat and overtime, the degradation of the components. I'm sure Milwaukee installed "heat sinks" to compensate, but the question remains are they going to be enough over time?

@rodw 3 жыл бұрын

VERY NICELY DONE MY FRIEND 👍👍 I'M HOPING TO GET IN THE KOBALT LINE OF TOOLS. HARD TO SAVE UP ON A FIXED INCOME !!! THANKS FOR SHARING YOUR THOUGHTS AND VIDEOS RODNEY

@AlwaysBeSmart674 3 жыл бұрын

Don’t do it

@AlwaysBeSmart674 3 жыл бұрын

If you’re trying to save money download the “OfferUp” app on your phone and buy dewalt or Milwaukee tools on there. They’ll be the same price if not cheaper then the kobalt if you’re in a major area there’ll be a ton of people selling there tools

@megaghostly1 3 жыл бұрын

Kobalt is good. Used tools = no warranty on your hard earned money. Think smart. Even rigid is good with that lifetime. I have my kobalt tools took me year and a half but finally got the combo kit for $400

@atrainace114 3 жыл бұрын

Awesome vid thanks for the info you should talk about price difference between the 2. Also, I would watch out over tightening lugs on your ram. Over torque can warp rotors damage threads or in some cases snap lug bolts. I'm sure you know this but just looking out. I would make a test block or something just offering ideas not trying to tell another man how to do his work on his equipment.

@Impact-OG 3 жыл бұрын

Yeah for sure, thanks for watching man

@paedahe4975 3 жыл бұрын

I’ve been luggin that nut around the shop for a bit now. The Milwaukee that is. Interesting to see it against Kobalt. 👍

@puffnstuff12 Жыл бұрын

I originally had the Kobalt but it couldn't even loosen the bolts on my brake caliper so back it went and I bought the Milwaukee. They need to make an xtr version of it with way more power. FWIW it couldn't even match the torque on my xtr 1/4" impact driver.

@mike_t_007 4 ай бұрын

Which battery did you have?

@mahadzirabdkarim4800 3 жыл бұрын

Goes to the blue feel my $ very valueble

@idgaffub 3 жыл бұрын

Love my kobalt

@Impact-OG 3 жыл бұрын

Yeah its not bad, I just don't like how the battery is on the end so its feel like a brick attached to it you know what I mean. THanks for watching

@angelisone 2 жыл бұрын

Both are great for the shop owners because the employees buy them to use. Lucky we get them free for being pros.

@Impact-OG 2 жыл бұрын

That must be nice hahahaha, feel free to send me any tools you would like to see a review on.

@jeffreyheinzelmanjr3317 3 жыл бұрын

I've seen on many channels of good tool guys the Kobalt beat the Milwaukee by alot. the Kobalt does over 300fp while the Milwaukee can't pass 300fp.

@jbhk7977 2 жыл бұрын

Don't let numbers trick you into believing Kobalt is better than Milwaukee. Maybe Milwaukee is more expensive and has a "little less power" but there's a world of difference in reliability and quality. You can put 24 or even 48 volts in this system/design, but you are limited to the physics of that limited space in the head of the tool (anvil and hammer size) Milwaukee has it nicely balanced, 12v and lot's of safe and long lasting torque, whereas Kobalt (at least that's my feeling) had to crank up the volts to 24v to surpass Milwaukee specs and attract customers. In this case "a little less is more".

@derekmeyers5966 2 жыл бұрын

@@jbhk7977 Lower voltage causes an increase in amps on equal work. More amps is higher heat.. so if anything Milwaukee may be pushing the battery and motor to their respective extremes to push this much power out

@gunmetlx7917 Жыл бұрын

There was a follow-up video on TTC after Project Farm found the opposite. Seems TTC revised their conclusion a bit. But, both still do seem like they are great.

@vancamper7650 Жыл бұрын

Yu better check again. Milwaukee wins. The torque channel uses his dynometer, which only measures torque, and not the impact mechanism which is as important. I prefer REAL tests on real bolts...... check out the vids below. Would love to see what the torque channel guy has to say about it. You can't argue real results. kzfaq.info/get/bejne/f6qlp7eknLGpe4k.html kzfaq.info/get/bejne/jLKEdsSV2trakqM.html kzfaq.info/get/bejne/it2cpcd4ucW5Y3U.html

@indypyrotechnics7750 3 жыл бұрын

Before I watch..it’s Milwaukee

@tammyshellikoff3482 3 жыл бұрын

Are you having a good day can you do craftsman cmcf820 vs ryobi p238 it is a video idea

@Impact-OG 3 жыл бұрын

Yeah maybe, I have sold all my craftsman stuff, but I might pick up some more as there is that good sale going on now buy a battery starter kit get a fee tool.

@tammyshellikoff3482 3 жыл бұрын

@@Impact-OG ok it is the craftsman cmcf820

@cesarastorga1001 2 жыл бұрын

Kobalt

@Pandash1 3 жыл бұрын

Considering the size and the voltage difference Milwaukee is very impressive. However the m12 does cost $50 more than kobalt, so I guess you get what you pay for.

@Impact-OG 3 жыл бұрын

The Kobalt was just at 99 and get a free battery maybe 2 months ago. Thanks for watching and now you can get the 2 free battery's if you get it. I want to say it ends tomorrow. thanks for watching man :)

@jond1536 2 жыл бұрын

for me, I would most likely purchase the Milwaukee as I am building up my power tools and like the battery interchangeability. have given away all my old harbor freight power tool, (battery) Great video

@angelisone 2 жыл бұрын

This field, car repairs, like photographers, all claimed to be pros. But then why do they still have to buy their own equipment? My daughter, an engineer & an scientist, get her equipment free and uses her company credit card to buy. My staff, many pros & I also get paid to use equipment /or toys. Its just too many are forced to buy their own tools & equipment to work for someone, shops & dealerships.