BEST Subaru Clutch How -to Replace Part 1 briansmobile1

Рет қаралды 79,874

Күн бұрын

BEST Subaru clutch How-to Replacement Part 1 briansmobile1
S-wrenches → amzn.to/2Ertl1D → The “Ibis” → amzn.to/2U2o324
Facebook → briansmobile1
Instagram → briansmobile1
Twitter → briansmobile1
Send stickers or a letter to:
briansmobile1 P.O. Box 282
Cedar Valley, UT 84013
Pull-a-Part Challenge video 3 → • The Pull-A-Part Challe...
Thanks for watching my videos. I hope they've helped you tackle something you thought was a challenge and left you feeling like a FORCE for win! And if nothing else, perhaps you had a laugh and were entertained!
Disclaimer:
Training and discretion is recommended before attempting anything portrayed in this video.
Due to factors beyond the control of briansmobile1, briansmobile1 assumes no liability for injury or property damage incurred as a result of the presentation of this information contained in this here video or any of the other briansmobile1 videos.
briansmobile1 recommends safe practices including the use of personal protective equipment such as eye protection, hearing protection, gloves, guards, shields, and reputable gear when paramotoring.
I am an Amazon affiliate, Prime member, and general Amazon nut. I provide links to help you find the right stuff for the job quickly, confidently, and conveniently.

Пікірлер: 79

@DENicholsAutoBravado 5 жыл бұрын

I can't wait to watch this! Clutches are like my final Frontier other than an engine rebuild. Speaking of Frontiers, I gotta redo my Nissan Frontier timing belt though. Belt wasn't tight enough. Being too gentle gets me in trouble sometimes. It'll be an epic video I hope. I know clutch by Briansmobile1 will be epic. ✌👍😁

@wyattoneable 5 жыл бұрын

You have some good tricks up your sleeve Brian.

@briansmobile1 5 жыл бұрын

Thanks- I make this look easy! In reality, I suck. I suck at giving up. And I struggle and struggle till I find these solutions. Then I give them to you guys!

@KALI1080 5 жыл бұрын

I love it when you work on Subarus. Helps me with the three I have.

@briansmobile1 5 жыл бұрын

Thanks for the feedback!

@802Garage 5 жыл бұрын

Same!

@griffen98 5 жыл бұрын

Thank you for the videos Brian. I'm too old to do this stuff anymore retired mechanic. Bad shoulders and most of my other parts :-) it was fun while it lasted

@joelischinsky3179 Жыл бұрын

Great videos!! This gave me the confidence to replace the clutch in my step son's 2013 Impreza. I am pretty much mechanically and have a lift but have never replaced a clutch before. Only difficulties were not being able to keep the engine angle low in the rear and in line with the input shaft. I wound up drawing in the transmission using the bell bolts and watching the engine to trans top and bottom gap keeping it even. I used a 3/8 inch ratchet and gently brought them together. Luckily there was no binding and went well. Not sure how you would angle the engine rear down otherwise. Another difficulty was separating the trans from the engine. I sprayed the dowels and bolts for days with PB blaster and needed to pry engine/trans apart using a long piece of metal in the area where you used your pry tool. The alignment pins wound up staying in the trans and I installed the trans that way but used anti seize on the pins for future work. Shaking and wiggling them apart did not work because of the rubber engine mount movement. Anyway....thanks for the videos.

@harambeexpress 5 жыл бұрын

1:30AM... Ooh look a clutch video!

@briansmobile1 5 жыл бұрын

Sounds like me! I was up at 3am morning before last when earthquake # 3 in 10 days hit- then I really couldn't sleep! lol

@maskeddude1997 5 жыл бұрын

I'm a simple man, I see brians video, I like.

@briansmobile1 5 жыл бұрын

Thanks masked dude!

@BigGixx23 Жыл бұрын

Once again, your videos are on point! Thank you for taking the time to put this video together helped me a lot. I just replaced a clutch on a JDM 2003 Subaru B4 RSK with a twin turbo set up.

@briansmobile1 Жыл бұрын

Great to hear!

@Django44 5 жыл бұрын

Thanks Brian for your usual thorough and user-friendly work; I don't know of anyone better on YT. It reassures me that my '08 Impreza is doing well at 370,000km with only one clutch change (at 170,000). Have you done a vid on replacing the rear wiper motor on a hatchback Suby? That's my next job.

@WickedCrispy 5 жыл бұрын

I'm trying to get some part together for a new clutch and flywheel. I can't do it myself and I'm having a non-Subaru shop work on it. All those weird little things you pointed out is making my anxiety rise.

@heavysnow8616 5 жыл бұрын

Great information Brian. Awesome job as always, totally enjoy all the video’s and thanks for taking the time to produce them.

@Mayamax3 5 жыл бұрын

That's a ton of work man. I would be reluctant to have a dealership perform this repair. I have more trust in people like Brian. Experience & attention to detail = trust. Looking forward to your 'Monkey Dance.'

@briansmobile1 5 жыл бұрын

Thanks Paul! This one is easy. I'm just putting a lot of detail in it.

@Mayamax3 5 жыл бұрын

You're welcome. @@briansmobile1

@noahg2788 3 жыл бұрын

Is there a part 2? This vid was great!

@ImpHalla66 5 жыл бұрын

It's gonna drip a little...deal with it. Awesome advice!!

@RGSABloke 5 жыл бұрын

Brian, holy shit, no rust on a car that age, here in Scotland that would be rusted to fu know what. Great video. Joe.

@IMxRELEASINGxANGER 5 жыл бұрын

As always great tips and tricks

@gemenicali20001 3 жыл бұрын

Pop the lower ball joint instead of the strut bolts. You dont have to remove the brakes or anything.

@ValentinArzola 2 жыл бұрын

How long should a clutch last under normal street driving conditions? More Or less.

@dalemccord2129 Жыл бұрын

1-250k+, usually, depending on how nice you are to it... Average 150k-250k...

@brandenwilson9913 2 жыл бұрын

You are a good teacher, thank you

@2011WRX4ME 2 жыл бұрын

Thanks for posting this as I’m looking to change my clutch on my own for the first time. Do you need to replace axle nuts with new or can you reuse? I was assuming the safe answer is new but was curious what you have done from experience. Thanks.

@jonascruz7836 3 жыл бұрын

(off topic) Damn, a Look bike!!!

@subaruenduro 5 жыл бұрын

Maybe taking the castle nut off and separating ball joints would be better and you don’t mess around with alignment when removing Subaru axles what do you think

@shawnknox8737 3 жыл бұрын

Hey Brian thanks for the video. In your opinion is there any advantages to pulling the engine vs the transmission to do the clutch I have heard of doing it both ways.

@AntonioClaudioMichael 5 жыл бұрын

Great video Brian

@SeanBZA 5 жыл бұрын

So clean underneath, did you take it for a pressure wash the day before you started this video to get it so clean.

@briansmobile1 5 жыл бұрын

Great observation- and no. This was filmed in the Summer. Everything I've been filming and working on lately has been rushed cranky and while I'm too tired to do it justice. Hence the gap since the last video.

@SeanBZA 5 жыл бұрын

@@briansmobile1 Still very clean car, every one i see under has a lot more dirt on it, even from driving strictly on tarred roads.

@DENicholsAutoBravado 5 жыл бұрын

Tarred roads. I grew up thinking of them that way. Then I moved from Northern Utah to Southern Utah and a bunch of people called them oiled roads. Not inaccurate. Roads made like that are made from parts of crude oil, but for some reason the term drove me nuts for a while, lol. @@SeanBZA

@txsviking 5 жыл бұрын

Great video!

@willhikearizona 5 жыл бұрын

Brian is that a crack on something in the upper right of the frame at 9:05? I'm not sure what the part is, looks like it is just below the exhaust manifold?

@briansmobile1 5 жыл бұрын

YES! I see you have an eye for detail- nicely done! It's the turbo heat shield. I tack welded it. It should be replaced.

@jeremyanthony9300 5 жыл бұрын

Ivan from phad did a clutch on a Subaru Forrester and instead of taking the transmission out , he took the motor out.

@briansmobile1 5 жыл бұрын

I do that too some times. It just depends on the engine toppings and what I'm feeling. Most are faster pulling the trans, but it's 6's. Here's a video I did on a Subaru Impreza where I pulled the engine to do the clutch instead. → kzfaq.info/get/bejne/d7WqfKmfqtOWXWw.html

@briansmobile1 5 жыл бұрын

By the way. phad is Pine Hollow Auto Diagnostics. Ivan is rad. Great channel too.

@freestyle101 5 жыл бұрын

Hey nice tips, where did you buy those red plugs to stop the trans from leaking?

@cafn8ed74 5 жыл бұрын

I'm curious, would this also apply to older Subarus (like an '02 Impreza)? Seems to me that I watched a Subaru clutch swap video a while back (maybe yours) where access was gained by pulling the engine. Is the difference in the car, or something else like maybe access to a lift?

@cafn8ed74 5 жыл бұрын

I think I got my answer at the beginning of part 2.

@ozzstars_cars 5 жыл бұрын

How did you get so spoiled Brian working on a rust free car like that? You mentioned some great tips and tricks!

@DENicholsAutoBravado 5 жыл бұрын

I think we're about see him in for a fight. Overall it looks really clean, but those final shots show some rusty trouble brewing ahead.

@ondrejjanovec6700 5 жыл бұрын

Good video.

@willefixit 5 жыл бұрын

i have similar clutch pilot string not 90+ are they all different?? mines 35 /45 but they didnt allways come with kits, all doubles given away ,some main shafts and universal. that string is impressive!!! wow

@gizzyguzzi 4 жыл бұрын

Why did you pull the struts loose? Was that one of the extra things you did? Totally not necessary to remove axles. When does the clutch replacement start?

@abuislam5446 5 жыл бұрын

thank you for the info

@cruzanbum3108 3 жыл бұрын

Well I guess I’m NOT going to attempt this myself...

@OficinaMasterdey 5 жыл бұрын

Troco direto aqui na Oficina

@briansmobile1 5 жыл бұрын

Agradável!

@klegolas4088 5 жыл бұрын

0:16 Wow

@spencerhill6795 4 жыл бұрын

Man thats a good accent....im gonna guess central or southern Utah or south west Idaho...good vid too!

@TheWwbartman354 5 жыл бұрын

Them pins are nasty lol!

@briansmobile1 5 жыл бұрын

Watch my video on them & you'll like the. They're a hell of a lot better than the clips Toyota used in the early to mid 1990's or Isuzu's pressed inner joints on the Rodeo.

@DENicholsAutoBravado 5 жыл бұрын

About 5:23 be ready to pause for text and diagrams!

@gatonegrote 3 жыл бұрын

and the question is .... how much do you usually charge for this service?

@briansmobile1 3 жыл бұрын

Not enough. I always use friends and families cars to make videos on. Sometimes just cookies. Shops I worked at would get like $750-$1250

@rgudmundsson 2 жыл бұрын

I just had quotes on a 2010 Impreza Limited Wagon naturally aspirated I recently purchased: Dealer $2,500, a shop with a fancy name $3,500-4,000, a local shop that hasn't done one prior, but are very capable $550, and an AAMCO transmission place $800-1000, leaning to the shop that charges the least, since it could require a new flywheel and other stuff, and since I paid 3k for the car, making it another $1,000 or less makes the most sense (I am going with a Luk kit that run $200, flywheel and a couple of other parts another $200)

@eliasbossert3700 3 жыл бұрын

Why didn't you just pull off the ball joint to remove the axles? There's no added alignment needed afterward.

@SmudgyContent 5 жыл бұрын

I need some info about 07 dakota has getrag238 6-speed now I believe the throw out bearing is getting bad, thing is it’s quite at first but a drive to town and home I hear it when I get home, just had a clutch at 153k-$1070 later 20k Miles later I don’t think they changed the throw out bearing... any chance could be something else that’s wrong?

@gilbertlamas2591 4 жыл бұрын

Have you ever have a crank no start situation after the install?

@theadventuresofjavier8698 5 жыл бұрын

Good o'l bohoobaru's Gotta love e'm Thanks B

@briansmobile1 5 жыл бұрын

Oh no! Is that a thing now?

@briansmobile1 5 жыл бұрын

Welcome Javier! is that a new thumb for you?

@theadventuresofjavier8698 5 жыл бұрын

A young trainee coined that phrase. Hes gone but the saying stayed 😂

@theadventuresofjavier8698 5 жыл бұрын

We started calling them bohoobarus when we had several subarus in a row for leaking head gaskets. Coolant and oil..expensive repairs and the looks on our customers faces when we say how much😢😢😢😢

@Tedybear315 5 жыл бұрын

@@theadventuresofjavier8698 We should have nicknamed ours like that. 07 Forester with over 210k. Decent shape but we wound up going through 2 heads for the drivers side. (dropped guides, cracked spark plug holes, severe warp that the machine shop refused to deal with....etc...) Finally found one out of a scrapped Subaru that only needed to be surfaced. Very very mild warp so no issues with the cam. Put about 8k on it so far and it drives great! But I'd hate to have had a full dealership or garage do what we did to it. Would have pegged over $2000 easily by the time we finished it