Best Tiny Whoop EVER?!? - Whoop Roundup

Рет қаралды 37,636

Күн бұрын

The LONG awaited Whoop roundup!
Email: anwyl8@hotmail.com
Let me know in comments what you think of content like this? It's a lot of work but I enjoyed making it!
Best Whoop Camera’s and gear!
Best Starter Kit: betafpv.com/products/cetus-pr...
Best Battery's: www.gaoneng.shop/referral/ava...
Product links down here (Not affiliate links)vvvvv
Tinyhawk s: www.racedayquads.com/collecti...
Mobula 6: [CA$128.48 17% OFF]Only 20g Happymodel Mobula6 65mm Crazybee F4 Lite 1S Whoop FPV Racing Drone BNF w/ Runcam Nano 3 Camera RC Drones from Toys Hobbies and Robot on banggood banggood.app.link/KAfhnULLSfb
Moblite 7: [CA$118.28 17% OFF]19.5g Happymodel Moblite7 75mm 1S Diamond F4 AIO 5A BB2 ESC Reciver 25/200mW VTX Whoop FPV Racing Drone BNF w/ EX0802 19000KV Unibell Motor Runcam Nano 3 800TVL Camera RC Drones from Toys Hobbies and Robot on banggood banggood.app.link/lVk6LtPLSfb
Mobula 6 Canopy: rotorgeeks.com/happymodel-mob...
Betafpv Meteor 65 frame: www.getfpv.com/betafpv-meteor...
Time Stamps:
00:00 - Intro
00:36 - Mob 7
2:13 - Mob7 DVR
3:17 - Tinyhawk s
6:46 - Tinyhawk DVR
7:50 - Tinyhawk 2 Mod
8:25 - Mob 6
11:05 - Mob 6 DVR
12:21 - Mob 6 Dilemma
12:42 - Mob 67
13:55 -Moblite 7
15:07 - Moblite Flight time
15:40 - Moblite DVR
17:45 - Summary
18:38 - Outro
Contact me: avasianfpv

Пікірлер: 287

@Micromation 3 жыл бұрын

"not at all for beginners" - me a beginner: interesting... "adds to cart"

@avasianfpv 3 жыл бұрын

😂😂😂

@laos85 2 жыл бұрын

Trust me you need to start in the simulator drone game first or else you destroy it in a short time

@Micromation 2 жыл бұрын

@@laos85 I went straight to flying after I've figured out how to solder receiver to my particular drone and got it paired and assigned controls on the transmitter. Doing alright so far but I don't do any crazy flying, just scouting area on bike trips (Flywoo Hexplorer was my choice for a first drone), the craziest thing I'm doing for fun is just zooming close above the ground. It's not really that different than flying a space ship in atmosphere in StarCitizen in decoupled mode. I really wish there was a solution to plug full size joysticks, I was never big fan of gamepads to begin with and transmitters are extra awkward.

@hu3e818 Жыл бұрын

@@laos85 what’s the game called and where can I play

@jostr8411 Жыл бұрын

Velocidrone is a simulator

@villepulkka756 2 жыл бұрын

Ended up ordering Moblite 7 thanks to this review ! Going to be my first tinywhoop, excited.

@avasianfpv 2 жыл бұрын

Woohoo!🥳 that’s so exciting 🤘🏼 cheers to your upcoming adventures! 🥂

@KOrnhOliO1 2 жыл бұрын

Superb whoop video! This video is so informative! Yes, the Mobula6 has been my all time favorite. I'll have to build a moblite 7, as I already have all of the exact parts. 😎🤘

@fpvcruzer 2 жыл бұрын

Thanks for this in depth video of the tiny whoops you have flown and modded and their strengths and weaknesses. I have wondered how these whoops compared to each other and seriously considered buying a number of them to figure out which was best for me. Your video has helped me understand more about what each has to offer and I just ordered the moblite 7. Tomorrow I will order the mobula 6 canopy. Good luck with the wall tap challenge in IGOW3, I look forward to watching your next video.

@avasianfpv 2 жыл бұрын

I’m glad this video helped you out! I appreciate your kind words too:) I’ll definitely be putting some work in the next day or two for that video! Hope you’ll like it

@LouisLuzuka 2 жыл бұрын

greatest of all time, you're literally the master. looking like a kid at a candy store!!

@avasianfpv 2 жыл бұрын

Lollll thanks man

@ezraengineerkid Жыл бұрын

I’m might on getting a betaFPV Cetus whoop, but I’ve tried gyro ones in the past AND BOY DO I LIKE TINY WHOOPS

@michaelmatthews6421 3 жыл бұрын

This video is very helpful. Bout to start shopping for a good whoop

@avasianfpv 3 жыл бұрын

I’m glad it could help! I’ll be making more in the near future:) let me know if there is anything you’d like covered

@PW.1993 Жыл бұрын

I watch this video weekly. Just finally let it get to me and bought a few 650’s and a Moblite

@modquad18 Жыл бұрын

Whoops are the shit, no doubt. I fly Mob6 and TH2 indoors and Mob7 v2 (2s) and THrace outdoors. All 5in just gathering dust now. Just picked up the Mob7 1s elrs and looking forward to see how well happy model has done with it.

@augustaj3912 2 жыл бұрын

Just ordered the moblite 7 as my first fpv drone, I can't wait to start flying

@avasianfpv 2 жыл бұрын

That’s super exciting man! I remember my first FPV drone:) it’s such a rush and it’s so much fun. I hope you enjoy it!

@markomedencic2140 Жыл бұрын

I can't believe you didn't end the video with My name is AvasianFPV, thanks for checking out my crib.

@sircrashalotfpv144 2 жыл бұрын

after i took Kabab's PID on my tiny hawk it's the best little flyer i have, rock solid and fun.

@avasianfpv 2 жыл бұрын

Kabab definitely has some experience in this hobby and knows a lot when it comes to those PIDS! I will say however, he is a bit bias towards the Emax products because they sponsor him…

@Sackenstein 3 жыл бұрын

Thanks for the video. I put my moblite7 in a micro heli tiny carbon frame with no ducts. It is so fast and has no washout. It is the best whoop I ever had.

@avasianfpv 3 жыл бұрын

That’s awesome! I did that in the past with my mobula 7, definitely so much fun😝

@Sackenstein 3 жыл бұрын

@@avasianfpv I'm thinking or trying 45mm props. They look like they will clear canopy. Any idea on how that will fly? I like trying new things.

@avasianfpv 3 жыл бұрын

@@Sackenstein if it’ll fit, I think it would be great! Pros: more efficient, more power, potentially less noise. Cons: careful not to over prop and burn the motors/esc, bigger props can break easier. Give it a try and shoot me message! I’d love to see how it turns out:)

@Sackenstein 3 жыл бұрын

@@avasianfpv thanks

@Xaverix1 2 жыл бұрын

Can you share what frame are you using? I'm looking to convert my moblite7 to toothpick but I have no idea which frame to pick.

@SPELTMUSIC 3 жыл бұрын

I got the tye dye frame for my Tinyhawk 2 haha I love it

@avasianfpv 3 жыл бұрын

They’re so sick eh? Lol I’m glad I found them

@butterflyfpv Жыл бұрын

Nice Video for the Community! New sub!

@timn4481 3 жыл бұрын

I agree the moblite7 . It is my favourite also. I have 7 drones now..acrobee, acro pro, 3 brushed ones (these are great on hot motors). The moblite7 is also really good on acro mode.

@avasianfpv 3 жыл бұрын

I think after some testing that my AVASIAN65 is my favourite whoop. The moblite 7 is just not durable enough and lacks performance. It’s just got amazing flight time

@itsjustmaxx9869 2 жыл бұрын

@@avasianfpv what whoop??!!

@avasianfpv 2 жыл бұрын

@@itsjustmaxx9869 hey! What do you mean what whoop?

@itsjustmaxx9869 2 жыл бұрын

@@avasianfpv you said AVASIAN65 is your favourite… I’m confused

@avasianfpv 2 жыл бұрын

@@itsjustmaxx9869 ohhh! It’s my build. If you DM me on Instagram I can send you the parts list! It’s not a BNF

@jadonjjj 2 жыл бұрын

Bro could you please make a tutorial on how to make the modded moblite7? Honestly bro I think you are one of the most skilled indoor pilots omg

@manojmohan7264 3 жыл бұрын

Good stuff.

@alexeyustich8659 3 жыл бұрын

350-380mah - fantastic control! 500... very heavy!

@avasianfpv 3 жыл бұрын

Yeah! Definitely more heavy.. I have a 650mah for the moblite7 and it’s heavier but it still rips and also, I get 10+mins flight

@user-mp3xw9fe6d 3 жыл бұрын

awesome video, definitely deserves a sub! Could i ask your opinion on DJI hd system on whoops? What would you sugest under 95 mm with air unit or vista? ( I have DJI v2 glasses and don't want really to spend money on analog... Or is it stupid to use whoops with Dji? )

@avasianfpv 3 жыл бұрын

Thank you! I appreciate it:)) It definitely is not stupid to use whoops with DJI lol, there are many options online for digital whoops, but if I must be honest. I have not tested them in person. I fly analog. But from what I hear, homfpv micron is a great one, and so is the IFlight alpha a75! If I was on digital id definitely get the HomFPV Micron. If you end up getting it. Please let me know what you think!

@MadMarcWinnipeg Жыл бұрын

Sick!

@Dairy_Air Жыл бұрын

thanks for the video.

@diddlycinema 3 жыл бұрын

YASSSSS. banger vid

@avasianfpv 3 жыл бұрын

🙌🏻🙌🏻🙌🏻

@julienrodrigue9170 3 жыл бұрын

Nice video!

@avasianfpv 3 жыл бұрын

Thank you🙏🏼 glad you like it!

@TheEmpo98 3 жыл бұрын

I started my journey 1 week ago with a drone for kids, no FPV, barely nothing and it gave me such good vibes that Im excited to buy my first fpv tiny whoop and this video is amazing, for a beginner I feel that any choice would be above my expectations so there is no questions, just congrats on your video. About batteries and extras such as fpv goggles or transmitter can you give me any recommendation? I have already searched quite a bit but I think I need advice from someone like you. Thanks for all, have a great summer!

@avasianfpv 3 жыл бұрын

I’d be super happy to answer any of your questions! Just shoot me a message on my IG link in description and I can help you out:)

@TheEmpo98 3 жыл бұрын

@@avasianfpv I just followed few hours ago! I will dm u tomorrow!!

@ej1782 3 жыл бұрын

Great information and presentation! I am a beginner. What would you recommend for goggles and radio unit? Also, do you think you may get into outdoor flying ie long range, freestyle etc? Thanks!

@avasianfpv 3 жыл бұрын

Thank you! I appreciate you🙌🏻 It would all depend on your budget, if you want to shoot me a message on my Instagram (link in description) I would gladly help you out! I already do! Check out my page, I do lots of outdoor freestyle and some long range, I have yet to make a long range video though. Check me out and let me know what you think my friend 😝

@SergioLopez-vu5lv 2 жыл бұрын

Thank you for your help

@avasianfpv 2 жыл бұрын

Anytime! If you have any questions just shoot me a message on my IG:) avasianfpv

@wildleder 3 жыл бұрын

11:10 that was so fucking smooth bro wtf🤯 u have some incredible flying skills... also awesome video I was pretty sure the tinyhawk2 was going to be my first tiny whoop but your moblite7 mod looks fantastic🤔 u got a new sub👍

@avasianfpv 3 жыл бұрын

Appreciate it brother! As a first tiny whoop, the tinyhawk is a great choice. It’s much more tame and durable, I think that you’ll get addicted and end up buying a moblite in the future anyway:) If you like that clip, I suggest you watch my new vid! I’ll have more coming too😝

@wildleder 3 жыл бұрын

@@avasianfpv ya sounds like a good plan- first th2 then the moblite7👌

@Popcorn-ys9qc Жыл бұрын

great vid! what receiver are you usually using?

@mitch9237 3 жыл бұрын

the moblite 7 is looking better and better. Thanks for all the info

@avasianfpv 3 жыл бұрын

OHH YEAH! It’s amazing. Over time I find durability is a big sacrifice. Just do the upgrades in the video and you should be cruising:)

@arunratanakprak2161 2 жыл бұрын

Best video!

@GrimSpeedFPV 2 жыл бұрын

I ordered the new mobula7 1s from banggood. After waiting 2 months on my preorder they cancelled my order. Soooo said screw that and just ordered this little guy! Hear great things about the moblite7. Except the camera mount. I hope the mobula 6 canopy was the right one to get?

@franciscohompler2773 9 ай бұрын

Fractal 75 or 65 (Fractal Engineering) is the best whoop 2023. Best frame (carbon) ofr all whoops

@avasianfpv 9 ай бұрын

I completely agree with you🔥 75 forsure! 65 is a bit heavy but still a great choice

@crabjak4203 3 жыл бұрын

Keep going

@RodrigoPetersBerchielli Жыл бұрын

Good vídeo Man, please show more about the mobula 7 set .

@RodrigoPetersBerchielli Жыл бұрын

@@MarianaJones0 that's true? how do i get this? it's a joke, right?

@Jortedrunner 6 ай бұрын

Would you still say the moblite 7 is the way to go? That flight time is amazing, just curious if you’ve found something better in the last 2 years

@bulgogi19 3 жыл бұрын

Subbed! Good head to head breakdown. Have you tried out the Eachine trashcan ? I just ordered one from CN but I'm impatient and may pick up the moblite 7 from RDQ after this vid

@avasianfpv 3 жыл бұрын

Thanks! I have not tried the Trashcan, but from what I hear, it performs similarly to the Mobula 7. In my opinion, it’s a little dated but it’s still a well good pick. I just don’t like that it’s 2s… But honestly I don’t think you’ll be upset.

@bulgogi19 3 жыл бұрын

@@avasianfpv The Trashcan comes with a 1s adapter, but it gets mixed reviews so I went ahead and picked up a moblite 7 w/ a canopy for true indoor and I'll keep the trashcan for in/outdoor fun. Thanks !

@avasianfpv 3 жыл бұрын

@@bulgogi19 awesome! Yeah the 1s experience on those 16000kv motors were never great. I’m glad you got both:) you won’t be disappointed

@karsahartanto9932 2 жыл бұрын

Try flying the moblite 7 with 300mah battery, you’ll get lower flight time obviously. But dude the power and feel of the quad will blow your mind

@avasianfpv 2 жыл бұрын

Oh I have!! But I’m my opinion, you don’t need THAT much power for an indoor whoop:) I find 1s 65mm is like the sweet spot. I can do any trick I want and have the most control. If I wanna fly outside and need more power, I fly my 5”😂

@bkstepan Жыл бұрын

Hey Mate, nice video and very nice flying. I am trying to improve so just wondering if you are flying acro or horizon mode as cant see mode in your OSD. Looks like acro to me but care to share👍. Thanks Brook

@avasianfpv Жыл бұрын

Always acro:) haven’t touched angle in 3 years

@cagefree 2 жыл бұрын

Hi, thank you for best comparison of Tiny Whoops I've come across. I have a question about the moblite. Would you recommend buying moblite, adding a Mobula 6 Canopy and even upgrade camera for HD or even 4K recording including the VTX with DVR? Would it be still as good as it is now or would such upgrade increase the weight so much and significantly reduce flight time? Also, would you share your custom tune on the moblite? How does it perform out of the box? Thank you very much.

@avasianfpv 2 жыл бұрын

Hey thanks!

@avasianfpv 2 жыл бұрын

I think forsure it would mess up the flight performance and tune but only if you want to fly fast and acro. If you just want to film slow and cinematic it would work just fine but might slow down the flight times. DM me on Instagram if you want the tune!

@Shauny_D 2 жыл бұрын

Stick your mob 6 in a 75mm frame too. That gives you sooo much more performance. I converted to the bt2.0 batteries too and get :20 more flights on mob6 but more importantly it feels so much smoother. Throttle control feels like there are steps inbetween each of the steps that were there.

@avasianfpv 2 жыл бұрын

That’s awesome! I’ve heard about that tip:)) I’ll have to do that. I’m thinking of making all my whoops tracer.. stay tuned for that

@Shauny_D 2 жыл бұрын

@@avasianfpv oh yah! I’ve been using frsky aio boards but in "redpine" mode short range but the lowest latency possible. Freaky fast... I use Elrs on my bigger stuff but haven’t added to any whoops yet to compare. If you haven’t heard of redpine and you have a multi protocol radio look it up!

@avasianfpv 2 жыл бұрын

@@Shauny_D redpine?? Oh damn.. never heart of it! I’ll have to check it out

@Shauny_D 2 жыл бұрын

@@avasianfpv yah in beta flight or others where you select your spi protocol just select redpine same on your radio and rebind. There is no telemetry and you still need to do the usually frsky fine tune thing on the radio. I didn’t notice a change going to it but if i go from redpine back to frsky or others it’ll take a couple packs before it feels locked in again

@kaskalo2 9 ай бұрын

When you change tp bt 2.0 do you mean on FC and use bt batteries? Or does it make sense to change the connector both on FC and battery?

@LooseNutty Жыл бұрын

is the canopy that you put on the moblite 7 a mobile 6 canopy?

@slowentropy4531 2 жыл бұрын

Put mine on V3 frame makes it super durable, cuts flights a bit as well but worth it for freestyle. The US 65 Pro 2S with the 14000KV switched to a 75mm frame running the 350mah stick 2S packs on xt30 is just insaaaaane fun out doors. I also run mob6 on 1102 19000KV 1S on V3 with Ant cam and goes awesome. Highly suggest all above builds for that real power whoop, I'm a huge fan of the mob 25k though haha. I like the 25kv for light 75mm builds. Cheers for the content.

@avasianfpv 2 жыл бұрын

Thanks for all the advice! I’ve been playing around with 75mm here and there while I usually like to rip my whoops indoors, adding that extra prop diameter definitely makes it more powerful! I’ll have to look into building a power whoop for outdoors but I usually just rip my 5” like a whoop outdoors anyway😂

@slowentropy4531 2 жыл бұрын

@@avasianfpv yeah I know what you mean. I've just been diving into whoops as so many sales and my limited budget. But man these 2S 75mm whoops can keep some serious pace. If I even get time from being a Dad and working I'll post again (though still borrrpw my sons radio lol, I'll get one soon lol).

@avasianfpv 2 жыл бұрын

@@slowentropy4531 main reason I’ve stayed away from 2s is just budget. I feel like 1s has come a long way and is very capable nowadays! Check out my recent posts, they are all 1s 65mm:)

@slowentropy4531 2 жыл бұрын

@@avasianfpv yeah I agree all my race whoops are 1S as rules are always 1S under 5pg non peop guards. But occasionally I like something crazy at the park when put with kids but not scary. These 75mm whoops do 45mph or so and it feel like 200mph in a whoop hahaha. Bur yeah US pro on sale for like $80US with an RXSR, it's worth I justbforbthe great thats on it

@andrewmyers5102 Жыл бұрын

Hey, is there anyway you can share your PID tune with us for the Moblite7? You can tell you have yours locked in really well! Want to get mine on par. Appreciate the content! I bought a Moblite7 because of your review!

@bangdfpv3270 3 жыл бұрын

Thx for the awesome Vid. Is the moblite7 able to upgrade the receiver to TBS Tracer? (I dont have Frsky nor Flysky)

@avasianfpv 3 жыл бұрын

Dude! It sure is! I’m doing that upgrade very soon. So stay tuned to see the results

@RKFP 3 жыл бұрын

Really helpful video. Thanks! Did you upgrade the PH2 connectors? Is it true that PH2 connectors have a limited mating cycles and need to be replace regulary? Thanks in advance.

@avasianfpv 3 жыл бұрын

Thank you! Yes I did:) and good question… that may be true? I’ve had to switch them out every once in awhile on a couple whoops but not all

@RKFP 3 жыл бұрын

@@avasianfpv thanks for the kind reply. Appreciate it. Like the way you fly. Cheers from Singapore! 🤙

@slowentropy4531 2 жыл бұрын

There really good solid pin ones on ebay cheap, they work even better I find tha thebmob 6 solid pin ones. But yes from time to time it's good to change. I find with ebay ones they are tight and stay that way longer, rarely will they disconnect even in battery ejection crashes.

@faededtoblack 3 жыл бұрын

So what upgrades did you do to your Moblite7? I know you said you just put a canopy and different props. Did you upgrade the camera? It would be cool if you did a breakdown video on it and show how you mounted the cam and maybe show how you tuned it 😊. Thanks

@faededtoblack 3 жыл бұрын

Never mind on the camera. I just noticed that it comes with the Runcam Nano lol

@avasianfpv 3 жыл бұрын

@@faededtoblack that’s a really cool video idea! I might have to do that for my next video:) but you’re right about the camera. I’ll talk about all my whoop upgrades in the upcoming.

@faededtoblack 3 жыл бұрын

@@avasianfpv cool. Thanks bro

@raleighro Жыл бұрын

What would you recommend for a beginner?

@downest1 Жыл бұрын

What would you say is the best whoop for beginners (no experience at all) right now?

@nimo517 6 ай бұрын

Fixing it is 80% for those who hang on after a few fixes beyond spare parts

@RyanStonedonCanadianGaming 2 жыл бұрын

The moblite 7 camera canopy mod is pretty sick.

@avasianfpv 2 жыл бұрын

I think so too! Have you gotten the chance to give it a try?

@RyanStonedonCanadianGaming 2 жыл бұрын

@@avasianfpv think I might just have to purchase a moblite 7 just to do it.

@thliaw Жыл бұрын

@AVASIANFPV Is that the canopy of mob6 or mob7?

@skatamartin4970 2 жыл бұрын

1:48 buy it, fly it, crash it, break it, fix it, learn it then upgrade it. - technology

@avasianfpv 2 жыл бұрын

💯🔥😂

@VAP0RCL0UD79 Жыл бұрын

Can we get the custom tune and rates for the mob7lite?

@bassbeats92 3 жыл бұрын

Thank you very much for this video! :) What are your thoughts about the moblite6 with a canopy? For racing purposes

@avasianfpv 3 жыл бұрын

I’m glad you enjoyed it! I’m sure that would also be a great option considering it would still be very light without the pins and all, but just a thing to note, I believe the moblite 6 only comes in 19000kv... so the mobula 6 might be faster if that’s what you’re more interested in considering it has a 25000kv model.

@bassbeats92 3 жыл бұрын

@@avasianfpv that's a very good point. Maybe I will swap the motors for 25000kv

@avasianfpv 3 жыл бұрын

@@bassbeats92 that would work too! Just keep in mind they are soldered on, in that case you would be modding a ton of things but if you’re up for it, do it my guy:)

@larrisAWSOME 2 жыл бұрын

tinyhawk 2 makes me wanna kitbash a whoop with a zaku.

@heeellllooo468 3 жыл бұрын

Hey! I really want to start flying fpv. Now i want to know if this setup would be good for beginners: tinyhawk s or maby tinyhawk 2, frsky transis Q X7 and the Eachine EV800. What is your opinion about these components? A good choice for beginners, if not what would be better? PS nice Video

@avasianfpv 3 жыл бұрын

Hey! Those options sound pretty good! However, depending on the price difference. I would recommend you stay away from Frsky radios and get maybe the radio master Tx16s:)

@heeellllooo468 3 жыл бұрын

@@avasianfpv Okay 👍 Thank you

@amitpatil4921 3 жыл бұрын

Hey it is a very informative video for all newbies to fpv...I was looking for an RTF and thought of emax tinyhawk2...but what do you think of the GEPRC TinyGO 4K did you get a chance to try it or do you recommend?🙂

@avasianfpv 3 жыл бұрын

The tinygo 4K kit sounds pretty neat! I haven’t got the chance to try it but I hear pretty good things. May I ask, why is it that you want a RTF kit? To save money or just to get flying ASAP?

@avasianfpv 3 жыл бұрын

@Amit Patil ^^^

@kenleunglcy 3 жыл бұрын

@@avasianfpv it is a very good beginner drone but lost that outdoor last week.

@avasianfpv 3 жыл бұрын

@@kenleunglcy ouch… where did you lose it?

@ketamine8225 3 жыл бұрын

deserve a sub my man

@avasianfpv 3 жыл бұрын

Appreciate it🙌🏻

@ketamine8225 3 жыл бұрын

@@avasianfpv hey I also has a question. I just started this hobby and want to get a tinywhoop just to get the feel on this hobby. I saw your vid and might decide to get the moblite 7. Do you recommend me it or something else? Im also gonna get betafpv litteradio and the eachine ev800d. Will this be good? Thanks man!

@avasianfpv 3 жыл бұрын

@@ketamine8225 hey! That is awesome, this is an amazing hobby. I think the moblite is a great choice but for a beginner I would maybe say no? The reason is because of the durability. Sure the flight times and performance are immaculate, but it’s hard to tell if you’re just starting off and I would honestly recommend the tinyhawk s or the mobula 6 (19000kv) to start off. Whoops are fairly inexpensive so if you want to hop in and try the moblite, be my guest. It’s hard to go wrong. I do recommend you get a simulator first though! Start with Velocidrone or Liftoff, it’ll save you some broken drones if you get the feel first😂 Those goggles and that Transmitter is a great choice:)

@ketamine8225 3 жыл бұрын

@@avasianfpv Ok thanks for the advice. If I go with a mobula 6 I get bad flight times right? Is the tinyhawk S a good choice? Which one would you recommend out of those 2?

@avasianfpv 3 жыл бұрын

@@ketamine8225 tinyhawk s or tinyhawk 2 is durable and have great flight times. I say get those. You’re going to want another whoop in there future. Then, get a moblite

@jojojojo6858 Жыл бұрын

Can you pls do a vid about how you put the camera in the housing

@rahulboo3211 8 ай бұрын

Im a absolute beginner. and I have tx12 elrs controller and a analog goggles too. could you please suggest me a bnf tiny whoop. as I said I have no experience with fpv. I purchased my controller and goggles I dint even open my package 😅. I want to buy cetus pro but it doesn’t have elrs.

@marior.7610 Жыл бұрын

Amigo soy un novato que dron micro me recomiendas para empezar agradezco mucho su ayuda

@grabirfan 2 жыл бұрын

Hi, love your videos, I am a fpv newbie, so here is some silly question?, does this moblite7 bind with Taranis qx7 frSky transmitter, or do I need extra receiver, thanks in advance. Also is it for beginners?

@avasianfpv 2 жыл бұрын

Hey! I appreciate it:)) Welcome to the hobby man, you’re gonna fall in love! The moblite should bind just find on the d8 Frsky protocol without buying another reciever. For beginners? Well kind of. As I said I. The video, I highly recommend getting a canopy of some sorts for it. It’s not a super durable whoop but it flies really nice and has good long flight times for people just learning, it will save you a bit of money on batteries. If you have any questions just message me on my Instagram in Bio!

@grabirfan 2 жыл бұрын

@@avasianfpv Thanks a ton

@nikolaystelmakh9721 2 жыл бұрын

Привет! Классный голос. Супер-текст и восхитительное видео. Спасибо! Я тоже стал фанатом 1s. Начал летать на emax tinyhawk 1 version. Понимаю, что мало энергии. Посове уй, пожалуйста, какую плату полётного контроллера мне купить взамен: Tinyhawk s или Tinyhawk 2?

@TheDjFac 10 ай бұрын

Any update on your favorite whoop build? Is there any chance you share your custom build? Many thanks!

@quaneu9216 3 жыл бұрын

i am a fresh newbie to fpv and been flying mobula6 for 2 month now （approximately 300 flight） i have upgraded my mobula 6 to mobula 75mm v2 frame with 40mm props i notice a significance improve in flight time and also peformance 1 things that i am curious about is i am running on stock 3.5.4 beta flight do i need to upgrade to the latest one？ and do jesc help in acro mode？ 2 is about the clashing part i been clash alot, the lens get scratch (but still can see), motor get wiggle a bit (but still can fly) should I just buy the sparepart? Or invest in new drone would be better? 3rd About the bettery, how many charge cycle a lipo/lihv battery actually capable of doing? Normally I will charge to 4.3 fly until 3.0 on osd (not sure about my betaflight bettery setting correct or not) > get 3.75 on voltage tester Is it a good practice? Sorry ya, new to this hobby got a lot of why on my head 🙏🙏

@avasianfpv 3 жыл бұрын

Hey! Thanks for reaching out. That’s great that you’ve been flying lots this past 2 months! The practice will definitely pay off:) The 75mm frame swap is a great move! Definitely ups the performance and flight time. Here’s my advice to you. If it ain’t broke, don’t fix it. And that is basically one of the most important things in this hobby, because the second you try to touch it up too much, something is bound to go wrong. So if your gear is working well for you, then keep it how it is! To answer your question about JESC, yes! Just flash it. It’ll make you fly longer. I see no down sides. Finally the lipos, you’re doing it fine. For 1s lipos, you can keep doing what you’re doing especially since they’re fairly inexpensive. But when you move up to 3-4-5-6s Lipos, that’s when you have to be more cautious. Keep ripping my friend😝 feel free to drop a question anytime!

@quaneu9216 3 жыл бұрын

@@avasianfpv Thanks for your great advise Regarding to the lipo, for my using habbit, is it normal to see significan decrease in in flight time (e.g. 3min flight time to 1.30min) after using it for 30+ cycle?? (on normal 300 GNB hv battery), and what is the point that i should i retire the lipo? just for sharing docs.google.com/spreadsheets/d/1M1GhJQZVxBpyIveOTEfMT4YUMNwAg5DWCN14QWjiI_U/edit?usp=sharing my data sheets about the lipo peformance (very not scientific haha) Another thing is currently i am learning more about freestyle (flip, roll, powerloop, dive, split s in the open area) and i pump alot of trottle some times. on osd it goes up to 10amp for a split second (usually, my crusing and hovering is around 5+-amp ripping and tide trun is around 7amp freestyle is arround 7-9amp) is it ok for my modded mobula 6? will i burn the board?? or motor ?? haha very scared and i always cooldown the quad after the flight with portable fan currently using 3 blade 40mm gemfan, is there benefit to go with 4 bladed one?

@kenleunglcy 3 жыл бұрын

I have got a GEPRC GR8 controller (Radio Protocol: FHSS) can this bind with Moblite 7 or Tinyhawk 2?

@avasianfpv 3 жыл бұрын

Good question.. I actually have never heard of that protocol..

@leonduck1670 5 ай бұрын

I dont understand English well. What did u say about the drone in the end. Whats the Name If the drone and what did u die that this thinks fly so good

@grege2383 Жыл бұрын

I have Mobula 6 - it's been sitting for over a year. It keeps resetting itself if the voltage gets too low

@Ikurozz Жыл бұрын

Have you ever tried the meteor 85 or 75 ?

@MichaelDFPV 3 жыл бұрын

Thinking about grabbing an NBD 75mm brushless extreme-durable frame and converting my Mobula6 HD into a pusher.

@avasianfpv 3 жыл бұрын

That sounds like a dope little mod! I’d love to see how that goes:)

@MichaelDFPV 3 жыл бұрын

@@avasianfpv I'll let you know when I get it done. 👍

@ronnor58 Жыл бұрын

I am completely new to this hobby. That being said, if you were to purchase your first FPV done kit, what would you buy at this time with what is available? I own a DJI Mavic Air 1, but I have only about 2 hours flight time so that is the limit of my experience. Any suggestions would be helpful, thank you. Subbed.

@avasianfpv Жыл бұрын

Hey thanks for the comment! I’d suggest this kit to learn on! You’ll love it betafpv.com/products/cetus-x-fpv-kit?sca_ref=1850769.NiIRhPwmpj

@aldrenvaldez2478 3 жыл бұрын

Sir I am interested on those tiny whoops. What are the difference between 1s and 2s, and what do you prefer to buy for beginner like me 1s or 2s.

@avasianfpv 3 жыл бұрын

Hello! Nowadays, I strongly believe that all indoor whoops should be 1s. 2s seems to be a bit too expensive and the extra power tends to lead to more crashes in small spaces. Plus, 1s can deliver a great amount of power with the right motors! So the short answer is, 1s:) it will save you more money and also weight, without the sacrifice of power!

@aldrenvaldez2478 3 жыл бұрын

@@avasianfpv Thanks it really helps!😍❤

@rayv882 2 жыл бұрын

What about the GEPRC TinyGo have you heard anything about that quad?

@avasianfpv 2 жыл бұрын

I have! It’s a great little kit for beginners aswell but I wouldn’t say it performs anything like the quads on this list. It’s more for people who want a taste of FPV without breaking the bank

@nerassurdo 2 жыл бұрын

What do u think of the new Mobula7 with 1s ELRS?

@avasianfpv 2 жыл бұрын

I have yet to try it! I’ve been debating it now since I have ELRS. If your check out my most recent video, that’s ELRS. I may make another on of these reviews if I get enough people asking haha

@MultiDevilduck Жыл бұрын

I am looking to get myself a drone and try to fly. Does anybody have a good recommendation? I have seen he linked the beta set is that still good for beginners?

@PaulSokolov 3 жыл бұрын

Does the model MobLite 7 have a free Uart to connect Crossfire nano receiver? Is it possible?

@avasianfpv 3 жыл бұрын

Yup! I’m thinking of running tracer on mine. Keep in mind, it does weigh a bit more

@BIODRONEHOBBIE 3 жыл бұрын

Up..Up..

@scu-dub 3 жыл бұрын

Great reviews man I am shopping for a whoop and really don't want anything over 250g and I want something durable with great flight time I'm looking at the mobula 6 and the moblite 7 however I don't like that it doesn't have a canopy either but after this review I am locking in to the moblite 7 😁🤌👍✌ oh BTW I am a sub now for sure✌

@avasianfpv 3 жыл бұрын

Thank you! Appreciate it:) I’m glad it could help🤘🏽 Feel free to ask me anything if you need a hand. Rip on!

@scu-dub 3 жыл бұрын

@@avasianfpv man I hope I won't be a pain lol but I have lot of questions man so I have a radiomaster tx12 and eachine ev800dm goggles would I be able to bind to the mobula 6 or moblite 7?

@avasianfpv 3 жыл бұрын

@@scu-dub don’t worry about it lol. Yes! So long as the tx12 supports multi protocol

@scu-dub 3 жыл бұрын

@@avasianfpv yes it does and thanks alot man I really appreciate it I have been an rc hobbyist for over 30 years and just now getting into fpv and the love is amazing in this hobby thanks again man✌ i suck at soldering so I'm trying to avoid ANY soldering at all lol plug and play for me lol

@avasianfpv 3 жыл бұрын

@@scu-dub that’s amazing! 30 years! Wow. I would recommend getting some soldering practice in forsure though lol, it’ll come in handy!

@matteomoser6535 2 жыл бұрын

yoo;nice video, could you help me with the pids for the moblite? I'm flying it with 14000kv motors and the green props. It's a little bit vibrating.

@avasianfpv 2 жыл бұрын

Hey man! Thanks for the comment. Are those motors stock? Usually it comes with 19000kv… I find for 1s lipo’s the sweet spot is between 18000-27000kv and 18000 being the lowest I’d go. If you’re experiencing vibrations in the cam, try putting foam under it but I’d say let’s figure out the motor problem first. Feel free to DM me on Instagram: avasianfpv and I can send you videos on how to figure out your issues

@matteomoser6535 2 жыл бұрын

@@avasianfpv Thanks man, I sent u a DM on IG :D !

@torrezani 3 жыл бұрын

Bro did you use the mobula 6 canopy on the moblite 7 ??

@avasianfpv 3 жыл бұрын

I did! I’ve tried a few. Tried the uz65 canopy, that’s great too. Works even better for jello. Now I’m sporting the caddx eos 2 with a mobula 7 canopy. It’s a bit heavier but honestly picture quality and durability makes it worth it

@torrezani 3 жыл бұрын

@@avasianfpv thanks man!!

@avasianfpv 3 жыл бұрын

@@torrezani anytime dawg:)

@DavidTavares1110 3 жыл бұрын

what 650mah 1s batteries do you use and recommend?

@avasianfpv 3 жыл бұрын

I am using the GNB 650mah, it’s the new purple one. They weigh the same as a 520mah but have better c rating and capacity🔥 it’s a win win

@DavidTavares1110 3 жыл бұрын

@@avasianfpv thanks man, and great video! very informative!

@avasianfpv 3 жыл бұрын

@@DavidTavares1110 appreciate it🙏🏼

@xiandan54 2 жыл бұрын

does moblite7 use same battery connector as mobula7? thanks

@avasianfpv 2 жыл бұрын

No, the Mobula 7 has a 2 pin pigtail that makes two 1s batts a 2s. The moblite is just 1s

@kevinlu6596 3 жыл бұрын

What's your pid/rates for the Moblite7?

@avasianfpv 3 жыл бұрын

Rates have always been 1000 for pitch and roll. And 900 for yaw. The PIDS are pretty much stock but I bumped up the I term for more locked

@notolle3931 Жыл бұрын

For How long Can you fly these

@nvembrace 2 жыл бұрын

Hey can you tell me how you made the camera stable with little jello on the mobula6 ? Everything I tried doesn't seem to work well.

@avasianfpv 2 жыл бұрын

Yup! 2 tricks. Put a bit of foam under the cam, and make your canopy the uz65 canopy:)

@nvembrace 2 жыл бұрын

@@avasianfpv After you said that I went to look at the uz65 and that also uses the screw up front, right? I can see that would also hold the foam down. Thanks a whole lot man.

@avasianfpv 2 жыл бұрын

@@nvembrace yessiirrrr

@danielponka4202 3 жыл бұрын

Helloo! Nice review. I'm in RC hobby for over 10 years now (mostly cars and a little bit of airplanes) and i feel it's time to start FPV. But I need advice from experienced fpv pilot. I'm flying my old airplane from time to time using Spektrum DX6i DSM2 and i wonder if it's sufficient platform for drones... or its about time to change transmitter? Could you please give me a suggestion? It's important for me to know, because im on budget and need to decide what stuff should i search. Cheers :)

@avasianfpv 3 жыл бұрын

@Daniel Plonka Hey! Thanks:) That’s amazing how long you’ve been in! It’s definitely time you get into FPV😝 that radio is definitely a lot older than the ones on the market right now and you might be able to make it work, you would just need to find the right reciever.. However, I do recommend upgrading it over time if not right off the bat. It will save you lots of trouble for problem shooting. I had a buddy try to revive 6yr old gear and didn’t have much luck.. ended up buying new parts anyway and spending more money haha! Please don’t be afraid to shoot me a DM on my IG and I can help you get started! Just let me know your price range, and what you’re looking into getting in with

@danielponka4202 3 жыл бұрын

@@avasianfpv Thanks for your reply. I will contact you for sure :)

@stephanecollins2093 2 жыл бұрын

Hey man I’m taking this as long shot! But where about in Canada are you. I feel like the only fpv person in my city and I would love to meet some drone pilots out there. I have so much to learn and I’m learning a lot as well. I have 2 whoops and a 3 inch loki x3, I need some peeps to hang out with and fly around and teach me a few things. I was hoping you would be in my area fingers crossed mtl ??

@avasianfpv 2 жыл бұрын

Ayo! So I’m in Winnipeg… I hope you’re close? I’d love to meet up and fly. I’m always down to meet new pilots to share my knowledge and just rip🤘🏽 If you are nearby, just message me on my IG (avasianfpv) and we can link up! If you’re not, still shoot me a message with any questions that you need answered, we can even video chat and talk quads lol! I just want to grow the community and make more friends:) Thanks for liking and leaving a message!

@booMMix_ 2 жыл бұрын

Do you have any tipps on how to make the props on the tinyhawk S not tonfall of each single time i crash even just a little bit?

@avasianfpv 2 жыл бұрын

Yep! You can put just the smallest dab of super glue on the prop just to lock it in. Let it dry before you fly and try to not get it in the motor bell. Don’t use hot glue though, it’s too heavy and will throw off the balance of the motor:) Another option is to use a bit of dental floss, wrap it around the shaft, feed it through the prop hole, then push down. Tell me if these worked!

@booMMix_ 2 жыл бұрын

@@avasianfpv Yo thank you so much, i used some glue, and so far, they didnt come off!!!

@avasianfpv 2 жыл бұрын

@@booMMix_ I’m glad the trick worked! If you have any more questions, don’t hesitate to ask:)

@k1ortia 2 жыл бұрын

How are you getting 10mins on your moblite? just received mine yesterday, and yes its an amazing little whoop, but i'm only getting around 7.5 to 8 minutes of mainly cruising around with a 1s 650 HV. Cheers

@avasianfpv 2 жыл бұрын

Try flashing JESC on your whoop and then try flying SUPER gently if you want to get 10 mins. You won’t get 10 minutes of like good flying though, super tame

@k1ortia 2 жыл бұрын

@@avasianfpv OK. Do you have a video or link that shows how to do this flash? Cheers

@avasianfpv 2 жыл бұрын

@@k1ortia I don’t.. but if you KZfaq “how to flash JESC” it’s super easy. If you have any questions or issues, message me on IG! Link in bio

@k1ortia 2 жыл бұрын

@@avasianfpv Thanks, yes that's what i did earlier, all flashed perfectly. just need to take my Moblite 7 out now and see if there's any difference

@avasianfpv 2 жыл бұрын

@@k1ortia please let me know what you think! Should fly longer and smoother:)

@europenshi540 2 жыл бұрын

How did you mount the camera inside ? Want to do this thx!

@avasianfpv 2 жыл бұрын

The canopy will come with an adapter:) it’s a very simple process. If you have any more issues or need to call me about it just message me on my Instagram and I’ll be happy to help!

@europenshi540 2 жыл бұрын

@@avasianfpv Thankyou! Much appreciated, ordered.

@adrianau4246 3 жыл бұрын

Hey what are my controller options if I want a moblite 7 (frsky) , moblite 6 (frsky) , UZ80 (frsky)! Thanks !

@avasianfpv 3 жыл бұрын

Hey! I would recommend a multi protocol radio. But it all depends what you’re wanting to spend. If you shoot me a DM on Instagram I’d be happy to dig deeper and help you out!

@Kingbob556 3 жыл бұрын

Get the Jumper T Lite

@avasianfpv 3 жыл бұрын

@@Kingbob556 ^^^ great option!

@keithmccormick1272 3 жыл бұрын

I have two Moblite's and both have a blur in the picture and i believe it is a tune problem but I am not a good pid tuner . Did you see this problem , what can I do ?

@avasianfpv 3 жыл бұрын

Hmm.. I don’t seem to have that problem. My prediction is that you’re getting vibrations to your camera. Have you tried my canopy mod? It should fix vibrations.

@keithmccormick1272 3 жыл бұрын

@@avasianfpv I bought the canoy when I got the quad . I had seen reviews talking about it . I think it could have to do with the pids .

@keithmccormick1272 3 жыл бұрын

I got it . The problem was in the camera mount . Thanks for the tip

@keithmccormick1272 3 жыл бұрын

If you wear your motors out try oiling them with Triflow

@avasianfpv 3 жыл бұрын

@@keithmccormick1272 gotcha! Good idea:)

@YoungBrascoTV 3 жыл бұрын

bro u bodied that track at your house...that s turn down the stairs tho....nice brooo

@avasianfpv 3 жыл бұрын

Appreciate it dawg😝 lol check out my new video and even my IG👀 there’s more where that came from.

@grumpyfpv6202 2 жыл бұрын

Hi, Um I have the Mobula 6 elrs and switched the motors to the T-Motor 0802's 25000kv and they are SO sensitiv, from 2 of Motors the bell just split apart and now i search for really durible Motors. I dont rally care that much about the price but when I buy it i want it to be as resistent as possible. Also of course great video:)

@avasianfpv 2 жыл бұрын

If you want, I’d try either betafpv 0802 22000kv motors because I’ve never had one break but just the motor wires sometimes pop off. You can just solder it back! I think you’ll love them. They are more efficient and a bit less sensitive:)

@grumpyfpv6202 2 жыл бұрын

@@avasianfpv they would also be an option. But I also found something different, the HGLRC Aeolus 0802 22000kv. They are first of all less expensive and have this unibell design. Have you any experience with them?

@avasianfpv 2 жыл бұрын

@@grumpyfpv6202 I just got them in last week actually! They don’t work on my betafpv boards… it’s kind of weird. Almost like it doesn’t have enough power to spin the motors up… plus they are a bit too heavy. I think you’ll like the betafpv ones bro

@grumpyfpv6202 2 жыл бұрын

@@avasianfpv that was also a problem with the t-motors I had. I take the Betafpv ones. Thanks for your time:)

@avasianfpv 2 жыл бұрын

@@grumpyfpv6202 no problem! I think you’ll like it, keep me updated!!!

@kaskalo2 6 ай бұрын

Would you be so kind to share your tune? (i have exactly same "mod")

@arunratanakprak2161 2 жыл бұрын

So moblite 7 is best?

@avasianfpv 2 жыл бұрын

Depends what your use case. In my opinion my AVASIAN65 build is the best for me

@jamessteidl5260 2 жыл бұрын

What should one fly if they need fantastic video footage?

@avasianfpv 2 жыл бұрын

Welll I’d like to dive deeper and ask some questions. What’s your budget? What’s your skill level? Fantastic as in 4k? Whoop or 5”?

@jamessteidl5260 2 жыл бұрын

@@avasianfpv I don't care about budget. I'll buy a cheap drone to learn on, but I need the kind of image stabilization and quality from a GoPro. I don't want to tear a GoPro apart or do any engineering. I just want to buy whatever I need to get an end result is good enough to sell as professional footage. Imagine flying from the outside into a building and through various rooms in smooth, stable, HD. 4k would be great.

@avasianfpv 2 жыл бұрын

@@jamessteidl5260 gotcha! Well I would definitely start with a simulator or and a whoop. Then once you get comfortable with that I’d buy a cinewhoop like the GEPRC cinelog and buy their naked hero 8. Then buy reelsteady to get the perfect buttery footage you want. And if budget is not an issue, get Dji digital. It’ll be easiest to set up.

@opossumfpv 3 жыл бұрын

How do you feel about the acrobee65?

@avasianfpv 3 жыл бұрын

I haven’t got the chance to try it! I’d love to though. Maybe one day

@opossumfpv 3 жыл бұрын

@@avasianfpv I can't figure out what whoop to get! Haha

@avasianfpv 3 жыл бұрын

@@opossumfpv do you race? Try my 65mm build

@motome8 3 жыл бұрын

No Newbeedrone?

@avasianfpv 3 жыл бұрын

To be honest, I’ve yet to try one of their whoops! I love their AZI props and rank them probably as my favourite whoop prop but they are quite pricey… Maybe one day someone can send me a NewBeeDrone whoop to review:)