Best Way To Mount Tires?

Рет қаралды 154,674

Күн бұрын

Rocky Mountain cjn.mx/rmatvmc
Baja No Pinch Tool bit.ly/2WPOmtQ
★CR250 Parts List www.prymemx.com/pages/cr250parts
★Tools I Used on CR250 www.prymemx.com/pages/tools
Parts/Tools Used In Video:
Tire Tool: goo.gl/pPcFuc
Dunlop MX3S Tires: cjn.mx/tires
Tire Changing Stand: cjn.mx/tirestand
STI Tubes: goo.gl/iLmDXQ
Tire Bead Tool: goo.gl/eGnPFg
Tire Irons: goo.gl/F7psZA
Rim Protectors: goo.gl/KqCzSb
Tire Lube: goo.gl/1BrzHp
Tire Gauge: goo.gl/RLTRPy
What is the best way to mount a tire? Join me as I mount up a fresh set of Dunlops for this CR250 build.
-Cameron
★Business/Social Media
Pryme www.prymemx.com
Instagram / cameronniemela
Facebook / cameron.niemela
★Camera Equipment
cjn.mx/camequip
★Ways to support the channel★
Bookmark the affiliate links below to make your purchases on Rocky Mountain or Amazon.
Rocky Mountain: cjn.mx/rmatvmc
Amazon: cjn.mx/amazon

Пікірлер: 204

@CameronNiemela 6 жыл бұрын

Share your worst (or best) tire changing story! Mine is torching a tire off the rim because I was a noob and couldn't figure out how else to get it off haha.

@superbenroy1 6 жыл бұрын

Cameron Niemela took me 2h to get an old dry tire off a xr80 🤷🏽‍♂️ it was stuck so bad

@koksaltskenneth 6 жыл бұрын

I did angle grind it off :)

@mtbridingog9083 6 жыл бұрын

Cameron Niemela hey bro do you have a carb from cr125 or jets ??

@mtbridingog9083 6 жыл бұрын

Benjamin Roy dang bro

@joshmx7161 6 жыл бұрын

my first tire change ever on my xr100 i popped 2 front tubes and the back tire was so dry rotted i had to cut it off. i have gotten a lot better since then.

@H8er-Maker 4 жыл бұрын

I've never seen a tire mounted before without using a single cuss word.

@PBstx1100 3 жыл бұрын

Haha so true

@thareal1318 6 жыл бұрын

Greatest moto youtuber I am always waiting on your next video and go into sadness when I finish one 😂 Can’t wait to see the next video!!!!

@endlessprogression9543 6 жыл бұрын

Damn that tool made it look so much easier and safer on the rim 👌 nicely done.

@randie450 5 жыл бұрын

Some great tips for working on dirt bikes here! Loving this stuff wish I found this youtuber earlier, great work.

@robertatkins272 3 жыл бұрын

Awesome tool and awesome tire change video. I really appreciate the close ups and detail.

@Nostrildomus 6 жыл бұрын

The no pinch will allow this old guy to do my own mounting again . Thanks for passing it . Another good presentation . . .

@alexandergardner2396 6 жыл бұрын

That looks so easy. My last change was terrible. After years of relying on mechanics I had forgotten about all the little tricks to make it easy. The sweat the poured off me was insane!

@rickfeith6372 6 жыл бұрын

Your toolbox has all kinds of surprises...sweet looking wheels all finished up.

@jurajkovac1770 6 жыл бұрын

Nice work, i am already working on dirtbike and then i will go and repair wheels as you did. This video brought me lots of inspiration.

@jmudd5449 6 жыл бұрын

Love watching your videos, I learn so much. Thanks keep on keeping on.

@x0kuu 6 жыл бұрын

That looks so easy! And those wheels came out really nice

@ian9toes 4 жыл бұрын

Credit to you Sir for owning up to that little scratch on the rim. It gives a warning to those who care about scratches, not me though I scratch them more while riding.

@dirtbikevlogs5572 6 жыл бұрын

Not watched the video yet already know it will be awsome

@krispewkrem3 Жыл бұрын

Glad you showed the front! The rear is pretty easy. But the front, if you don’t know what you’re doing, is a difficult. That tool is awesome

@Imthewestwelder 5 жыл бұрын

Just to make it even easier, use the powder and apply to the tire/tube before installing👌helps to get the tube move in the tire instead of stretching. Love the videos. Being a mechanic I love seeing tools that make the process easier.👍glad your doing good.

@mrvolts9262 6 жыл бұрын

I just got a set of tubliss always love your stuff my dude

@AustinWoll 6 жыл бұрын

I love the shot of the tire bead seating on the rim lol nice video work

@tomgordon4395 3 жыл бұрын

Great Video, thanks for explaining about the proper position of the two nuts on the tube

@mxrider2strokebraaap54 6 жыл бұрын

Looking mint😍 great video as always

@superbenroy1 6 жыл бұрын

Can’t wait to see the final bike😍

@Paradoxal-Gaming 6 жыл бұрын

2 eggscelent videos! Vid where you assembled the spokes and mounting tires, i got some great tips!

@deanhuff123 Жыл бұрын

I got one of these tools last week. Holy crap it is a game changer!

@dixoncider7256 5 жыл бұрын

nice, going to be changing my dirt bike tires next weekend. Thanks!

@Reqlayy 6 жыл бұрын

Just got my Husky 125 fixed up, test drived it and aftert that Cameron just uploads a new vid, awesome. It's hella slippery in Finland though.

@matiassavolainen1227 6 жыл бұрын

Liukasta on

@Reqlayy 6 жыл бұрын

Varsinkin iltasin ku on tiet täysin jääs

@matiassavolainen1227 6 жыл бұрын

Just pistin derbii kii uuden takakatteen, ku heiti vähä lintas liikaa :p

@Reqlayy 6 жыл бұрын

Itel läks takarengas vetää sivuluisuu ku pääs piikille kakkosvaihteel, frendit sano et näytti vähä hurjalt ku rengas sai pitoo vast iha reunas :D

@mathiassuomela8121 6 жыл бұрын

Etelässä tiet ei enää jääs mut perkele ku oma husse sutii ku tota hiekkaa noilla teillä

@jordanbates470 6 жыл бұрын

Great video your really good at mounting tires with that tire tool

@colesasso8877 6 жыл бұрын

Your my inspiration for racing and your vids are dope af

@aido_supermoto 6 жыл бұрын

awesome video cameron!

@yaboi6006 6 жыл бұрын

Loved the vid! Keep it up👍🏼

@TrailBoundco 6 жыл бұрын

Do you think it would be easier to mount with one of the tire mounting stands with the bead breaker/press arm in conjunction with the Baja no pinch?

@N1k5ulZZ 6 жыл бұрын

another great video as always :)

@GalorOffroad 5 жыл бұрын

Nice video, clean and clear 👌✌️

@josemariaperez5600 6 жыл бұрын

More interesting the tool. Good job Cameron.

@davidrestivo8598 6 жыл бұрын

That is a must have tool. Great job

@nathanmiller1324 5 жыл бұрын

You make everything look so easy tho, good vids they help me a lot with my bike

@glyph8733 6 жыл бұрын

Really love your Videos dude!!

@MtlDeath 5 жыл бұрын

Love ya videos, great job

@evanhord3038 6 жыл бұрын

I can’t freaking wait for this bike to be done!!

@alanferia3116 6 жыл бұрын

Definitely gonna pick up one of those tire Mounting tools

@stiixbeatman 2 жыл бұрын

Perfect, this is exactly what I was looking for !

@michaelthiergarten818 6 жыл бұрын

Your awesome Cameron!

@PlayGameSafe 6 жыл бұрын

Your videos are so useful, teached me a lot of things man. Now, time to practice on my own bike :)

@nzzs203 4 жыл бұрын

Were you ever teached grammar???

@jaxonnolen3165 3 жыл бұрын

N Z Z S you need to be teached grammar lol

@PlayGameSafe 3 жыл бұрын

@@nzzs203 Learn to think before you speak lol. English isn't my primary language lmao.

@WibbyKDX 5 жыл бұрын

Put baby powder in a garbage bag. Air tube just enough to take shape and place in bag and shake. It covers tubes perfectly and will work multiple times

@owenarsenault5955 6 жыл бұрын

Looking like a pro. 👌

@karelfortl2365 6 жыл бұрын

Many thanks for sharing your mistakes. One of the best what I can imagine is prevent mistakes and damages without first experience almost like in the perfect World :-)

@pablocalderon555 4 жыл бұрын

how are you cameron I hope you are well I have a question I would like to know if my motorcycle has the possibility of putting a thicker tire? the size of the rear tire 90/100/14 and the front is 70/100/17 so they originally come

@justinfewkes3535 6 жыл бұрын

Im going to get the tool but put a rubber coating / flex seal on the end to help form hitting my shiny rims thought I’d post this so other people can do it to.

@abyields7831 Жыл бұрын

What an awesome vid., thank you 🙏

@brooxbowen543 6 жыл бұрын

Those are the freshest wheels I have ever seen good job man keep it up 👊

@kgahms2947 6 жыл бұрын

This will be very helpful🤘🤙

@matiassavolainen1227 6 жыл бұрын

Great video as always! (y)

@chrisvozza6530 6 жыл бұрын

I need one of these!

@Thundercat68 6 жыл бұрын

Made it look easy. I hate mounting dirt bike tires, may have to look into that tool.

@MrCalifornia1234 5 жыл бұрын

Seems like a useful tool. 👍

@MegaRusty64 2 жыл бұрын

Hi… did you take your axle spacers out to get the Baja tire tool sitting on the hub or can you leave the spacers in place ??

@operator1876 6 жыл бұрын

i cannot wait for this build to finish...its killing me inside to know what the end result is!

@donsimpson1976 6 жыл бұрын

WOW very nice man..do you have an idea on the brand and color of Sprocket you plan to use with the rims?

@CameronNiemela 6 жыл бұрын

Not quite sure yet. Probably Renthal

@thatdesertmoto4923 6 жыл бұрын

Pretty fricken slick🤙

@adslammer1359 6 жыл бұрын

Nice man!!!

@blackdevilteam5503 6 жыл бұрын

Hey Cameron! What you think about buying a 2003 KTM EXC 250 2 stroke? It has some SX, and SXS parts.

@DiverTrev 6 жыл бұрын

*PARTOF THE NOTIFICATION SQUAD YAY GOOD VIDEO*

@mikebell5378 6 жыл бұрын

What clutch are you going to run in the cr250?

@dandufour116 6 жыл бұрын

would this work on 10/12 inch pit bike tires because the ones on my crf50 are a PAIN to change

@Cycle9568 Жыл бұрын

I just mounted up a D606 this month and it was so much easier with a Baja No Pinch. If you need a little extra help use a couple of bar clamps to squeeze the beads of the tire together.

@MarceloDelfinoDelfino Жыл бұрын

Boa Noite tem no mercado livre?

@CarsnStuff 6 жыл бұрын

that tool looks so convenient

@jamespolucha6911 3 жыл бұрын

Where do you get the rubber cap for the valve stems

@jorgevizcarra4437 6 жыл бұрын

When doing the rebuild for the Honda are you going to do a restyle kit if so that’d be an awesome video to see the fitment and how it’d look and thanks for the great videos keep it up

@CameronNiemela 6 жыл бұрын

I'll have to look into that kit some more when the time comes. Thanks for watching man

@blanedumas3892 6 жыл бұрын

Well another banger from Cameron. Can’t wait to see what she looks like in the end :🤙🏻🤙🏻🤙🏻🤙🏻👌🏻👌🏻👌🏻)

@markkus1134 4 жыл бұрын

Just changed my tires yesterday thanks for video That tool should have a hard plastic tip to prevent nicking rim

@tacokiller101 6 жыл бұрын

I used to use that yamalube stuff but have went away from it and use just a lil bit of grease along the bead. If you let that spray lube dry it will skin over and you will never be able to scrub it off

@manuelriesen2536 6 жыл бұрын

Another great video, sweet looking wheels man! When I got new tires and heavy duty tubes I was wondering why there are 2 valve stem nuts. What is the reason for one nut to be on the inside of the rim? I read somewhere that tubes are male so that's why they have 2 nuts...... made sense :)

@CameronNiemela 6 жыл бұрын

Ahahaha

@forian_mx_1263 6 жыл бұрын

This Tool is so cool i will this tool😬

@kymstock1852 2 жыл бұрын

I carry this tool on my longer trips within an old sock in my panniers. The bike I was riding had a 17 " wheel and I had a Motoz Adventure rear tyre on it. Those are hard to fit, being stiff in the sidewall. You do need to practice using this tool. As luck would have it, I didn't get any punctures on the " Big Trip" but I did get to use the tool on other rider's bikes. My fee was one beer per tyre. On an 18 " wheel / smaller tyres I probably would keep this tool at home.

@codered0071 6 жыл бұрын

Amazing

@timkuch2307 2 жыл бұрын

How do you keep the tool down on the hub when prying and keep it from lifting up off the hub out of the axle slot?

@robertlatham8361 6 жыл бұрын

Man I'm gutted for you Cameron, you never know how something works best until you try it out a few times first .. hats off to you bud, I feel for your inner OCD. the rims are gonna get marked in anger anyways look forward for your next video !! regards from good olde Blighty

@CameronNiemela 6 жыл бұрын

Hahaha

@ram43x80 2 жыл бұрын

Tool has gears n tension n ware out gears?

@smokefentanyl 6 жыл бұрын

Awesome

@xygarkemper6392 2 жыл бұрын

Where do you find those ruber grommets plz?

@nomdeguerre13 6 жыл бұрын

Black Rims look great, but show changing nicks and other stuff, so it goes. Appreciate your honesty!

@Vini-rm2ss 6 жыл бұрын

Magnifique ! Bravo !!! 👏👍👌😉😁😎😉💨💨💨💨💨💨!!!.....

@kingmatthews5436 6 жыл бұрын

I like the Motorsport website more. I just like how it’s set up and how easy it is to use but that’s just my opinion. Anyways nice video as always

@HOLLOWPOINT71 5 жыл бұрын

The second nut on the tube,heard so many different ways of using this,is the way you use it the proper way,w=hats the theory?

@giuseppedimezza8027 6 жыл бұрын

Please give a link where to buy that pressure indicator!! Nice video btw

@CameronNiemela 6 жыл бұрын

Thanks! Tire gauge is here www.rockymountainatvmc.com/p/726/3040/Tusk-Low-Pressure-Tire-Gauge

@lukemadsen7254 6 жыл бұрын

whens the bike gonna be put together

@hampton6963 6 жыл бұрын

Can you do a newer 450 plastic conversion ?

@CameronNiemela 6 жыл бұрын

Possibly

@glennburling2713 6 жыл бұрын

Please can you put that bike back together already it's killing me over here in England.!!!! Great vids and very informative keep up the good work.

@jwilson1500hd 5 жыл бұрын

I ordered a baja and used it yesterday for the first time. At the last little bit it seemed to want to dig into the tire instead of pushing it down onto the rim. It was a gummy "cheater" tire. Maybe a regular tire wood work better or maybe it was user error. Tire was warm and i used plenty of lube, watched several vids and followed instructions still had to end up spooning the last bit onto the rim

@bmx08 6 жыл бұрын

Uma dica...Use esmalte de unha na cor preto para pintar pequenos reparos.

@mikegro8502 6 жыл бұрын

Does the rim locks go under the rim bands?

@CameronNiemela 6 жыл бұрын

Yep, thats how I had it

@John_Doe_6996 2 жыл бұрын

Tried changing a front tire for the first time yesterday...got it 95% done, and then piched the damn tube...perhaps i should look into that tool your using

@joel387ktm 6 жыл бұрын

I always fill the tube up and let the air out a couple times to ensure there are no wrinkles in it before seating the bead and my worst story is busting my knuckles on the disc and sprocket getting the tire mounted but im pretty much the Michelin man now days with my skills lol