I love the way they do these vids in a nice, neat tidy workplace with a showroom condition bike and all proper equipment....... There's me out on my drive with cold wind, my wheel on the ground rolling around, getting covered in oil and road grime while saying every swear word in the book!!

5:05 “work rotor side up to protect your knuckles” me dripping blood from my pointer finger 👁👄👁

The last time I changes a Dual-sport tire was about 20 yrs ago. Now I'm 73 and having a hell of a time. Glad I found your video. It cleared up a couple of questions I had and I'm ready to tackle it again. Thanks for the videol

As a MX'r of 40 years, I was just looking for a chance to call "BS". I did not see one. I was taught years ago this same way from an old time MX'r and it has served me well for hundreds of tire changes. Well done Cameron!! I am now retired from MX but still get the fellow MX'r having trouble changing tires. I am happy to show them this, of many i'm sure, techniques. There is more than one way of course, but for me, this is hands down the best. Just one note to add. Avoid doing this with a cold tire. I have even used a hair drier on cold days to warm the tire prior to doing the work. If the sun is out, lay the tires out in the sun. Your rims and knuckles will come out in the end thanking you. Definitely invest in a tire stand and "bead buddy". Spot on there. Cheers, Well done, keep it up.

Great explanation! I have learned how easy this job can be if you take your time and follow all the steps.

One of the best videos I have found! I run tubliss and have that system pretty dialed, but just switched to a tube for winter riding because my studded tire has a few leaks in the knobs. You made this process chill. Thanks mate 💪

Best dirtbike videos on KZfaq by far. Thanks bro!

Awwwwwwwww, the rag in the sprocket is an awesome idea. I always struggle with making sure the parts are all where they are supposed to be. Thanks!

Cheers fella some good tips there ... I always put the tyre half on then do the tube but your way looks so simple. Thanks

Gotta love Australian summers the tires just about pull themselves on 😂

Nicely done. Well explained. Organized and not to wordie. Good video.

Nice one easy steps to follow Thank you, Cameron.

Great video, I've always struggled with tires, but not anymore!!! Bead buddy really helps and those spoons work great too!

Great job. U made that look super easy. Thanks for the great video.

best video I seen to do this task.... Great job Bud!!!

Thank you so much for your time and efforts Cameron! GREAT video.

Its about twenty times harder for me, and takes twenty times longer.

Great video. You made it look easy. In all of the other tire change videos I've seen, they put the tube in after they get one side of the tire on the rim. I've often wondered why they're not putting the tube in place first, like you did. I thought maybe it's because there's less of a chance damaging (or pinching) the tube if you get one side of the tire over the rim before putting it in.

I’ve always been taught different on how to put a tire on by putting the tube in once one side of the tire is on and trying to get the little valve stem through the rim is always a prick. Will try this way! Love the videos man keep it up! Thanks aye

Thank you so much bro I really needed this no other guid could really show me every thing

You are an awesome teacher!

I'd like to thank Prince Harry for taking time out of his busy schedule to show us muggles how to change a tire.

Thanks and very informative.

Nice video. I have an extra tire with rim for my paddle tire. Saves my back.

Awesome video thanks brotha

Excellent video, very helpful. Thanks! How does anyone give this a thumbs down?

Very helpful. Thank you

Sending love, Cam!

awesome thank you just what i needed to see

Great tutorial ............thanks Cameron

Great video. Thanks.

Awesome videos man, thumbs up

yeah def the speaking slowly and clearly help by a lot. Keep with ur vids....ur knowledge is key for your followers

Great job. I hadn"t seen the Bead Buddies. Thanks!

Great video!!

Great vid. Cam. Keep up the good work.

Great video sir!

Muy buenas ideas amigo. Saludos desde Argentina 🇦🇷

Gr8 video Keep up gr8 work

You make great vids. Thank you for speaking so slowly and clearly

Excellent video Cam. Picked up my Moose Racing tire stand at TJ's (KTM) here in Austin. Will putting the stand, the spoons, and the knowledge from this video to work tomorrow.

Good instructions.

Great video. Really made me comfortable about changing a tyre myself now

Great vid thank you

Nays thanks for the inportant details.

Nice one!

Great step by step video thanks bro it help a first timer(me) tremendously!!!

Thanks this helped me out a lot

Thank you , Great advise

Thanks dude, I appreciate you

Good tips thanks 🙏

900th like, love your vids man!

Thanks dude, I’m about to change my rear tyre. 🎄🤙

Sweet instructions

Thanks! I am new to the dirt bike world due to my son getting one for Christmas and we already experienced a flat tire so I had to figure out how to change the inner tube on it. Whats crazy is that the inner tube had a fine cut around it.

Great video.

Great video. I didn't have a "tire Buddy tool, so I used some C clamps to hold the tire down into the rim. works pretty well.

Some good tips thanks Cameron. Had to fabricate my tire tools...I used to just use 2 big flathead screwdrivers, talk about being careful to not pinch the tube haha I knew he would have all the proper tools and stand. Keep posting.

1st time watching...was very clear and easy to understand. Keep 'em coming!

You guys that have real stiff tires, or are up north where its colder, lay the tire down and stick hair dryer in the tire for about 20 minutes. Makes the tire a lot more pliable.

Done. Whew. Oh crap, I put the used tire back on. :)

Thanks for video....just successfully changed my rear....even with screwdrivers nailed it!! ..... FYI I'll be getting some spoons 👍

Man youre the best . Ive learned a ton from watching your videos !!

Awesome vid!

This helped me out so much with my bike thx hro

Awesome video man I'm about to get a dirtbike so ive been trying to Learn as much as I can

excellent! well explained

The best 👍👍👍

like always good video💪💪💪💪

Great tips! One more; if you have trouble getting the bead to seat, put the tire back on the bike, loosen the rim lock, put air in and roll it up and down the driveway, the weight of the bike will make the tire flex and the beat usually goes right on. Don't forget to tighten the rim lock.

Good video, you make it look to easy.

Excellent vid but no mention of installing with the correct tire direction arrow!! Would a little air not be better with the final fit, to reduce risk of pinching? And I think I've found that leaving a "lazy" (loose) tyre lever in position during final section (eg. @6:42) can pinch the tire if/as the loose lever flips over the rim edge.

Great job - thanks.

Thanks, Cameron. I was struggling with my rear tire for hours without succeeding. Had a look at this video and 5 minutes later my tire was out. Awesome :) I appreciate the effort you put in your vids. Keep up the good work.

What brand are your tyre levers please? Great instructional video btw.

Thanks!

This is the GOTO video every time (once every 2 years or so) I have to change tires.

Well done Vid...Does it matter which hole the rim lock it mounted?

Great videos.

Worked my ass off last night installing a new tire on a freshly laced rim. Ended up pinching my tube. Man, I was pissed. But I had a 2nd tube on hand. Worked just as hard the second time around but I got it. I was also installing it on the floor.

Thanks bro

Your the man bro. When are you going to build that CR500

Funny how they always fail to mention the stand which also makes a huge difference.

The section between 3:45 and 4:05 is what I struggle with most. In my case I try to do this for a tenere 700 rear street tyre (scorpion str, 150/70/18). When the rim sinks down in the tyre the top almost will not budge to allow me to pull out the tyre. I have managed to do it with warmer weather but with around 10 degrees celsius the whole because so stiff that I couldn’t manage. I tried using loads of grease and also tried with soapy water but no luck. Any tips here?

First time I have ever been the 1 thousandth like!

you are very good

Sick tire change bud. One or two tips I wasn't aware of.

Do I need a tool for pulling the valve stem core out? Or can I do it with just my fingers?

Great video, been riding and changing my own tires for over 50 years. 70 years old now. Still learning new things. Thank you

When you start removing the tire with your tire irons it’s imperative to use 5 tire irons spaces about 1-1/2” apart. Insert your 5 irons and then in sequence flip them 1-2-3-4-5 and instantly you’ll have 1/4 of the tire off which relieves the bead stress. From there the irons will work the tire off with ease. Flip the rim and do exactly the same. Once both sides of the tire are on the outside of the rim then pull the rim out of the tire. When installing be sure to put your last iron in place when the bead is about half way on the tire. The bead will get very tight, so having your last iron in place is very helpful, and always be sure the bead is pushed into the center of the rim to relieve the bead from being so tight on the rim. For the last tire bite I prefer the Nomar spoon bar which was originally made for a Honda Goldwing tire. Using this tool on a dirt bike tire makes the last section of the tire easy to leverage onto the rim without pinching the tube. Tubliss or Bibs are the way to go, tubes will send you home while your friends keep on with the journey.

ok , and what do you do during the travel , you dont have central stand of course?

Nice, I am going to make me a stand. No shop will change them anymore without leaving them around here or even put a tube in. I can change them just havent done many. With my son and nephew riding now also, i got to do it.

I've never had soo much trouble with a tire (Pirelli Scorpion Hard Compound). I'm soo frustrated right now because I've gone through 4 tubes. I use the same spoons that you use. I really think it's the tire, because my Kenda Millville II went on fine.

Great video Cam...KIller instructions mate Aloha from hawall

These are the best videos I've ever seen holy shit

Do you know what the rear axle torque spec is for a Xr200r

Nice

You made that look easy, I’m partially paralysed in my right hand so I’ll see if I can do it

Nice video. I always change my own tires. Not very good at it. I need a tire/rim stand. I use a bucket. I'll check out your site. Thx