Betstco Flail Mower Belt Replacement

  Рет қаралды 9,534

Greg Mills

Greg Mills

3 жыл бұрын

Changing the belts outs on a Betstco EFGC-155 flail mower. The belts that came off it were 21", but they seem too short. 22" or 23" would be better.

Пікірлер: 17
@programacion7344
@programacion7344 2 ай бұрын
Thank you for the video.
@dougnicholas2317
@dougnicholas2317 Жыл бұрын
I have the AT 145 and after about 10 hours of use one of the belts and the tensioner craped out. It is impossible to change the belts. Just not enough give. The reason it failed is that one of the belts was installed upside down from the factory. I would not recommend the BestCo product.
@msyotaboy
@msyotaboy 2 жыл бұрын
Thank you for the video. I can't find this belt any where. I'm assuming its a standard 21 inch v belt? I can probably get a tractor supply?
@gcrmills
@gcrmills Жыл бұрын
Yes. Sorry I'm late.
@spyadagani
@spyadagani 2 жыл бұрын
I have same mower and belts failed last week. What belts are you using? Not clear from your voice. Thanks.
@gcrmills
@gcrmills 2 жыл бұрын
These were cheap belts, as in the cheapest. They have held up for a year now though, I just don't let them smoke anymore is all.
@jamesdavis6678
@jamesdavis6678 3 жыл бұрын
Looks like rebuilding a Volkswagen bug motor in the car
@tacomafan7488
@tacomafan7488 3 жыл бұрын
i just got same mower! what happened ? did you hit something?
@gcrmills
@gcrmills 3 жыл бұрын
I left it too low in thick grass a couple of times. By the time I heard it squeeling, it was smoking. Lasted quite a while after that though. They are 21", btw.
@alisaid3182
@alisaid3182 2 жыл бұрын
How to change the oil please
@gcrmills
@gcrmills 2 жыл бұрын
You might have to turn it over, and let it drain out the filler.
@AndrooH
@AndrooH 2 жыл бұрын
Did you NOT replace the tensioning nut?? You'll run into problems later on :/
@smallareafarming
@smallareafarming 2 жыл бұрын
kzfaq.info/get/bejne/adB_jaR73Ki4Yo0.html
@gcrmills
@gcrmills 2 жыл бұрын
Well it was 2 years ago now, so far so good.
@wdk535
@wdk535 3 жыл бұрын
Can't see a thing, dude. How old is that Betstco?
@gcrmills
@gcrmills 3 жыл бұрын
Turned 1 last week. Except for the belts failing, which was my fault, a bearing came apart on it. The welds and metal work seem good though.
HOW TO SHARPEN A FLAIL MOWER
8:54
A RITTER BIT WILL DO
Рет қаралды 10 М.
No empty
00:35
Mamasoboliha
Рет қаралды 6 МЛН
Sigma Kid Hair #funny #sigma #comedy
00:33
CRAZY GREAPA
Рет қаралды 36 МЛН
How to attach a flail mower to a compact tractor
8:50
Worcester Smallholder
Рет қаралды 3,3 М.
FMP260 Flail Mower Belt Assembly Installation
1:53
Baumalight
Рет қаралды 595
Installing grass blades on a Betstco flail mower
4:42
Alan Yelvington
Рет қаралды 20 М.
I BROKE MY FLAIL MOWER (Stump Grinding)
17:02
A RITTER BIT WILL DO
Рет қаралды 10 М.
UPGRADING THE FLAIL MOWER (maintenance time)
6:45
A RITTER BIT WILL DO
Рет қаралды 3,2 М.
New Drive Belt Change
14:35
redbarnboats
Рет қаралды 5 М.
Betstco Flail Mower...Can it handle 6 FOOT tall SUDAN Grass?
14:56
Betstco Flail hitch fix.
4:36
Alan Yelvington
Рет қаралды 1,7 М.
🔴 Cambio mazze trincea erba.
4:36
Village Life
Рет қаралды 12 М.
Самая кровавая бандитская тачка
0:39
Леха Беспалый
Рет қаралды 2,5 МЛН
Que destreza al volante 🤭 #todos #seguidores #destacar #autos
0:13