And now the fun begins!! Your farm is soooo beautiful, like a little slice of heaven!!

Good job for a small unit. Anyone that thinks you will get a finished look in 1 pass is dreaming ,especially with grass that high. Hammers are good for hard sticky woody weeds but you nailed it with the y grass blades. Just don't let it get that tall again you should be good. All that much on top of the soil will produce some great soil in 12 months. Well done.

I just bought the same mower today. I'll go get it Thursday. Thanks for posting this vid. It looks like it will do a fine job.

Thanks for the video. I just ordered one. Your assembly instructions were very useful.

By only cutting the bottom metal bar on the shipping cage you can preserve the cage almost entirely for fire wood storage latter. All you have to do is cut the metal bar that the flail mower rest on and then cut away the black metal strappings that hold the Flail mower to the frame. The metal box should easily slide off of the pallet with the flail still sitting on the wooden pallet. This works well with the 105 model and might not work with a slightly bigger models. No need to cut each well of the frame. The results are a metal frame that can be latter be used for a variety of things. I use mine for storing fire wood. Great video vary useful. I just received my Betsco 105 a few days ago. Great pointers and fabulous information.

You mounted the A frame for your top link connection on the mower backwards (putting them on the wrong sides)...as it is leaning back instead of forward, which is why your toplink is so far out. Flip the A frame mount and you will be able to get a lower cut with better mulching.

That sudan grass is some tough stuff! Mowed a 7 acre field of it once with a Ford 3610 and a 8ft woods chopper. I swore that day id never plant that crap ever again!

Great video, very well done. Thank-you. I am considering the 135 for my 23hp NH Boomer 20.

looks great, I had almost bought the 41" myself but opted for the 37" on my 1023E because of storage and I never do a whole lot and don't mind the extra time on the seat ;-)

😢 my sheep 🐑 and goats🐐 would have loved that mature grass.

I just ordered one myself. 48" heavy duty.

I have the ef 125 and one thing I found is move the grass wiper all the way to the top of the roller, I've had mine pushed up a couple of times from uneven ground, I didn't want it to get bent, it works just fine at the top of the roller, you will have to back the nuts off a ways so the end of the flat bar can get past the roller.

Thanks for the great video and review. Got a little nervous with you under the unit without a jack stand or something supporting it though.

Ah, yes, Crocs. The official safety shoe of NASCAR.

It might be an issue of perspective but I believe the top link mount is backwards. I’ve not seen one that slopes away from the tractor.

Whoever gave this video a dislike is just jealous on how much you know

Finally got mine in (135) and I’m already running into small issues. 1) Manual says the oil for the PTO gearbox has a 3qt quantity. It will barely hold 1qt which is what it also states in the manual. I thought they had unsealed bearings in it because of the massive amount of oil it required but now I think the transition from Whatever country it was made in to English got lost a little bit. 2) the pins for the lift arms to fit in were not included nor were the spacers. Emailed them about that but I figured it to be quicker to buy my own. Besides they gave me 2 fully assembled PTO Shafts so I couldn’t be mad. 3) NOT Quick Hitch Compatible. I have a Harbor Freight Hitch so we know how accurate they are so I will look at buying another quick hitch but I suspect it won’t work due to the lower pin holes and their close location to the flail frame. 4) the lower lift arm pins are not cat 1😑😡🤬

Thinking about the medium duty 48” for my GC1705. I like the hammer teeth a little better than the y teeth.

Really nice place you have. How has mower held up? I ask because the supports look a 👍little thin. Good music while.

How has this been holding up and have you been happy with it? Great video!

Seems a shame…..no neighbors to lend a cow? Interesting video

I hope you checked belt tension prior to running.

I like your enthuseasume for the product, but please don't get under the impliment without fixed support like jack stands. I use them when every I change the cut height on my FH-EF135.

why do these flail mowers all seem to mow so close to the ground? After talking to the local implement dealer here, it was his opinion that a flail mower would require more HP to operate than a brush hog as it chews up the vegetation a lot more than a BH. Flail mowers do not seem to be used very much around here--central Missouri--I guess there must be a reason.

Is the rear ground roller weighted? Mine seems to be because when I turn it by hand it returns to the much heavier side of the roller. Or something is bent. Doesn’t seem right. Just asking, thanks

Hi, Just purchased the exact Flail mower today from Betsco. I live in Canada and was wondering what 's your tractors max PTO HP? My tractors max PTO is 16 HP and the tractor is a 21.5HP. This video is now a few years old, how is the flail mower doing these days?

Hammer flails would probably work better on that tall grass. How long have you had your Bestsco?

We use to use flail mowers for a finish cut. I would use a sharp bush hog for that stuff.

seems to me it did a lot of knocking down of the grass instead of shredding...

Hey how do you like the bestco flail? Thinking of buying one myself but I'm unsure on quality. How many HP per foot do you run?

Hello, I live in Colombia South America, I am interested in buying a flail mower for my Kubota bx2380 tractor. I would like the best advice from you to tell me which one is the best that suits my tractor. I appreciate your attention and I look forward to your response. Do you think that the one shown in the video could work for my tractor?. Thank you

Betstco: Come for the terrible equipment... stay for the abysmal customer service! The upper pulley wheel of my flail mower FELL OFF THE SHAFT upon it's SECOND use mowing 4 acres. I called customer service for assistance, and Jeremy made a mediocre attempt to assist. It was necessary for me to text pictures of the issue to someone else at Betstco for Jeremy to evaluate. I called back another two times during the day to see if Jeremy had looked at the pictures, and he said he hadn't. Enough time business days have passed now that I'm confident I will never hear from them. I'm on my own. You're likely to be on your own if you buy from them.

Looks like you put the mounts on incorrectly. All the pictures I have seen use it set up to shift left or right.

Sure you figured this out by now, but you have the stand on upside down.

Would the hammers work better than the Y blades for that application?

Now you need a yard rake to rake the grass up

Doesn’t look like it is cutting everything.

wrong tool for the job.