Holy Smokes! I WOULD NOT have been able to figure out how to draw this on my own, and my thickness planer would have never been fixed with the 3D printed part I made with the drawing. Thank you so much.

Awesome tutorial. I just want to add some details that I stumbled across: The 20 and 12 that come up repeatedly are the radii of the gears. You can see the diameter at the bottom when creating a spur gear, divide these by half to get the numbers you need to plug in. Yes, you also need them for the rectangle you will draw. If the sketch didn't move with the small gear, you probably moved the body instead of the component. If you can't rotate the gears, you probably didn't click on the Checkmark to accept the pivot movement. The size of the circle dictates how far the teeth will extend into the gear. This can be adjusted at will. I can't see how the last step (extrude, split, remove) on a single teeth is necessary, everything seems to be in line already but that may just be me.

That was awesome to watch thanks!!

Really good tutorial. Thank you very much.

Love the 🎶 music! 👍 And the Fusion 360 too! 😃

This is fantastic, very nice method!

Will changing the size of the gears from the very beginning from 5 mm to 20mm change any of the other measurements? I essentially want to create the same exact gear set but just 20mm instead of 5.

Awsome

Super comme d'habitude , même si j'ai pas encore tout compris comme d'habitude aussi :). Merci pour cette super vidéo

Very nice tutorial!

Que buen vídeo...te felicito...sigue así!

Bonjour, depuis hier justement je galèrais pour faire un engrenage merci pour se tuto comme d'hab clair et net bravo

good tutorial!

that looks overwhelmingly complicated

Thank you, it really helped me here.

Merci, cette méthode est tellement rigoureuse et épurée !!!

Grand merci!..

thank u for video, good job!!

Super comme toujours

How about internal bevel gear?

how do i print these as two sepeperate bodies my printer wants to print this how it is but i want the two bodies seperate and then i will manually put them together. do i unground the bottom part of the gears?

I am so confused

Words!

At 9:08, it wont let me extrude that part. Instead it highlights sketch 2 and it wont let me highlight body 2. Please help

What were the calculations you used ?

2:33 help the remove is not here in my right click menu 4:07 seriously how do you select a whole body like that and not just a face well no choice togo on the list and do a right click there but i want this feature how do you select that without selecting everything???

comme quoi faut se relire avant d'envoyer sic !

hola vengo a dejar mi comentario en español! saludos

sen nası bi kralsın yaaaaaaaa

Please put the Tipee back in the description area. I sent you a "beer froid"

Why i can't loft?

1:24 ???

... please tell me there is a simpler way D:

ce

Why do you move the minor gear 12 + 20? I mean, if I want to use other sizes and teeth How much do I have to move it? Because if I use module 1, 10 and 20 teeth, and move the smaller gear 10+20, it goes too far.

Talk

OMG. What a pain in the neck. Ugh. No way I could do all that.