Difference between Product Audit and Layout Inspection: IATF | HINDI | Bhavya Mangla

Difference between Product Audit and Layout Inspection: IATF | HINDI | Bhavya Mangla | 10 Jan 2021

Рет қаралды 9,033

3 жыл бұрын

Link to Blog: bit.ly/DifferenceProductAuditA...
Strength lies in differences and not in similarity: Stephen Covey
Do we know the difference between Uttarayan (Summer Solstice) and Dakshinayan (Winter Solstice)? Do we know who rotates around whom (Earth, Sun and Moon)? Do we know who is more powerful in the relationship (Husband or Wife)? Even though there are distinct differences but often we fail to realize it!
Product Audit & Layout Inspection have distinct purposes. Both are important for the effective implementation of the management system & quality of products manufactured in the organization. Although the result is to fulfil customer requirements, there are few key dissimilarities between the two. Let us understand it more.
#layoutinspection
#productaudit
#productinspection

Пікірлер: 45

@devendrasarna1056 Жыл бұрын

Thank you very much sir

@bhavyamangla Жыл бұрын

You are most welcome Devendra

@Dailyupdate660 2 жыл бұрын

Nice 🙏

@bhavyamangla 2 жыл бұрын

Thanks for the Feedback.

@viveksharma9018 2 ай бұрын

Dear sir, very excellent explained about the both requirements as per system.🙏🙏

@bhavyamangla 2 ай бұрын

Dear Vivek, Thansk for your response and liking it.

@sonukumaryadav6572 3 жыл бұрын

Superb sir

@bhavyamangla 3 жыл бұрын

Thanks Donu

@bhavyamangla 3 жыл бұрын

Thanks Sonu

@yadavawdesh Жыл бұрын

Really good clarification

@bhavyamangla Жыл бұрын

Thanks Awadesh

@mukulkumar4963 3 жыл бұрын

Good explain sir.

@bhavyamangla 3 жыл бұрын

Thanks Mukul

@popatpandhare2039 2 жыл бұрын

Dear sir, you are explaining the only difference . I suggest you , make a video on IATF all clause requirements and VDA 6.3 requirements in detail

@bhavyamangla 2 жыл бұрын

Thanks for the suggestion. Majority of the IATF clauses have been explained in the last 2 years. For VDA 6.3, hopefully soon.

@abis1326 Жыл бұрын

Difference between Layouts Inspection and SIR Make video on it

@bhavyamangla Жыл бұрын

Thanks for your suggestion. Hopefully soon

@sunilmishra7406 3 жыл бұрын

Good explanation!!!

@bhavyamangla 3 жыл бұрын

Thank You

@sank2025 3 жыл бұрын

Well explained.. in simple way.. 👍

@bhavyamangla 3 жыл бұрын

Thanks Sanjay

@ajeettiwari4643 Жыл бұрын

Sir different between special chareterstic and critical chareterstic in control plan

@bhavyamangla Жыл бұрын

Dear Ajeet, Thanks for your query. Special Characteristics is the requirement of the IATF standard and Control Plan. There are different types of Special characteristics like safety, critical, Major, Minor etc.

@vijaytalekar5432 10 ай бұрын

Sir please share, Difference between inprocess and product audit

@bhavyamangla 10 ай бұрын

Dear Vijay, Thanks for your suggestion. Hopefully soon

@arunsaini7531 3 жыл бұрын

Sir function test is the part of product audit not layout inspection

@bhavyamangla 3 жыл бұрын

Arun, Thanks for your response. Please see clause 8.6.2 (Layout)

@kunalsharma1112 2 жыл бұрын

Sir please explain the key difference between 8D and CAPA?

@bhavyamangla 2 жыл бұрын

Dear Kunal, CAPA is a generic terminology for Corrective And Preventive Action. While 8D is one of the popular methodology, which was initiated by FORD.

@saleemmulla158 2 жыл бұрын

NC ko kaise handle kare

@bhavyamangla 2 жыл бұрын

Thanks for your query Saleem. The attached link may help kzfaq.info/get/bejne/pbOmrLxny7XZkp8.html

@niteshgusain1738 Жыл бұрын

Sir kya control plan se product audit ho jayega, please reply

@bhavyamangla Жыл бұрын

Thanks Nitesh for your query. In the control plan, there are 2 columns. One is related to Process and the other is related to Product. The column related to Product can be used as reference for Product Audit

@utkarshjha396 3 жыл бұрын

Bhavya Mangla Sir : While going for the product audit, from where we need to pick the product samples? Is it mandatory to pick the samples from FG and then do the audit or on every particular station, we shall check the dimensions as per the control plan? Similarly in layout inspection, is it mandatory to pick a part or two from running line or we can get these parts from the previously produced parts?

@bhavyamangla 3 жыл бұрын

Product audit has to be conducted at appropriate stages of the production. So pick the samples from appropriate stages. But Product Audit does not mean inspection ( refer blog and video). For layout inspection, sample can be taken from Finished Goods

@utkarshjha396 3 жыл бұрын

@@bhavyamangla Thank you so much for the explanation, Sir! Usually in our company, while going for the product audit, we used to take the bin consisting of many parts from FG racks and do the dimensions check as per the control plan and also check the packaging as per the customer approved packaging standard. And while going for the layout inspection, we used to pick a sample from final inspection process (prior to packaging process) and do the complete dimensions and functionality check as per the drawings. So is it the right way of doing the audit and inspection or we need to change the methods of above-mentioned, if any. Love to hear your opinion on this, Sir!

@gurugarg8002 3 жыл бұрын

SIR , WHY ANY CERTIFYING BODY FOCUS ON AUDITS RATHER THAN IMPLEMENTATION?

@bhavyamangla 3 жыл бұрын

Thanks for the question. Can specify it in more detail to understand

@gurugarg8002 3 жыл бұрын

IATF IS BEAUTIFUL DOCUMENTED FORM .. BUT PEOPLE MOTIVES IS JUST TO CLEAR AUDITS RATHER THAN IMPLEMENTATION... ANY BODY WHO AUDIT CREATES A PRESSURE JUST FOR AUDIT .. BUT IT SHOULD BE TAKEN AS A LEADERSHIP TO IMPLEMENT..

@bhavyamangla 3 жыл бұрын

@@gurugarg8002 Yes, you are right. A lot depends upon the top management of the organisation. How much importance they give to the management system..

@arunsaini7531 3 жыл бұрын

SIR WHAT IS THE DIFFRENCE BETWEEN pRODUCT AUDIT AND product qualification

@bhavyamangla 3 жыл бұрын

Thanks for the question. In which clause of IATF 16949, there is reference of PRODUCT QUALIFICATION?

@arunsaini7531 3 жыл бұрын

FAQ FOR IATF

@arunsaini7531 3 жыл бұрын

Sir the word is product requalification and is in FAQ 21

@bhavyamangla 3 жыл бұрын

@@arunsaini7531Product Audit is clear from the Standard. When we talk about Product, the intent is that after PPAP approval, when we want to requalify the product again, we check all to the dimensions functional tests etc to ensure that product fulfill the requirement. This can be generally done as per customer requirement