That is vital information thank you so much. The offset it is the undercarriage killer.

this video is incredibly helpful! I just purchased these exact same wheels except in bronze and was leaning towards 255/85's but prefer the look of 285/75's and don't want to lift either. Thanks man!

Had a stock 2020 Tacoma, always afraid of getting stuck. Went for the 10k service and traded it in for a 2021TRD4X4 OFFROAD. Been thinking of going wider and taller, I do a lot of sand and rock off roading throughout the so cal 🏜 desert. I've actually had great results with the stock tires, both on and off road. I find old mines on Google maps and plot a course to them and drive. Sometimes climbing up 4 foot banks other times in 3 foot of loose sand. Momentum is the most important in the sand.

I just picked up a pair of method 701 16 inch rim with zero offset. I’m really excited to put it on my Tacoma when I get it. Thanks for this video as it aided me in getting the right size . I am getting Toyo tires though.

Great explanation Thank you!!

I do t even own or like Taco’s but I’ll watch, Like, and comment Cuzz I’m out of work

Great setup

Them te37 are badasss motivated me to buy it

Totally agree on not buying the Trd Pro, I got the 2022 xp Trd off-road for a really good deal and I’m saving for suspension and some nitto grapps rn. Got sliders, tint, front bumper and snorkel in my garage because I’m scared to cut my car up😩

Thanks for this vid my guy. I’m getting a some 285 k02s. On my stock wheels. There so much info out there. It hard to know where to start. I’ll come back and let y’all know how it goes. Keep up the good work

Hi, love the setup! I’m thinking of going with 275/70R17 on 17x9 0 offset, stock suspension. Would that be a good setup with no rubbing issues?

I think this is the best size for fit form and function 👍👍

I think I'll go with the 265/75/16 on my 4X4 SR5 , so I can keep it Street able power and braking because I hear that lift kits that are not done properly will cause more problems. Like pinion angle and other stuff. Also , I want to be able to put a spare tire on that is not too close to the exhaust

thank you!!

great info - two thumbs up

Beautiful truck dude.

So I have 265/70/R17 K02’s on my stock 2013 Tacoma right now. I am putting a 3” suspension lift on mine though soon. Will I be able to get the 285s on my stock rims being I have the 17” wheels . And I can put them on before my lift right?

It’s called steering sweep. Common term in the drifting world. The bigger the spacer or offset, the more is going to sweep forwards the fender liners

Did you notice any different in mpg and acceleration and breaking? I’m about to place an order just want to make sure

Hi. How much u feel difference in MPG after these tyre. Thanx

You guys always seem to make videos when I'm thinking about the same topic. Lol. I ordered the wheels for my tacoma today. Mine has a 2" spacer lift on the front and icon add a leaf on the rear. The wheels I ordered are 16x8 -10. Do you think I'll have much rubbing with that tire size and offset with the 2" strut spacers on the front? I planned to go with the k02s or ridge grapplers.

Damn it, if I would of known this I would of gone with your size tire!!! Everyone told me they wouldn’t fit without a lift or leveling kit.🤦🏻‍♂️

Hey Brother, were you able to fit a full size (285/75r16) spare in the stock location under the bed?

How much rubbing do you get actually off roading?

Quick question, the stock wheels are 16x7 or 16x7.5? So at zero offset, where does the extra width go?

Great vid. I have a 2019 Taco 4 x 4 Sport. I just purchased some TRD 17 x 7 wheels. Do you think 285 KO2s will rub very much on a stock suspension? Thanks. Roy from So Cali.

Will they fit better with the 2" TRD lift kit meaning no trimming or spacers?

very good info did you notice any difference in trotting power in your truck

Have you taken it off road to see if it rubs when the springs are compressed

So, (with a 3 inch spacer lift) if I stick with the stock TRD wheels that are 16x7 at +25 offset (5.0), I will be able to run 33"s just fine? This is strange because on Jeeps (what I'm educated in) you almost always want negative offset to avoid issues, but it seems with Tacoma's, you want to keep everything positive and tucked in close to avoid rubbing?

What size spare are you running for this? And did you buy 5 wheels?

255/85/r16 a true 33.1 inch tire no rub - no cut - no lift - the skinny tires !

Or, instead of trimming, you could have just adjusted the alignment for more positive caster angle. Adjust before you cut.

That set up only works if you never go off road..... It will rub when the Suspension is flexed

Stock wheels are 16x7, I have the oe trd pro wheels which are also 16x7, think I could fit the 285s?

Hi what about four wheeling and when it flexes will it hit the fenders

Any power mods ? Would be fun too see that lol

Do you get noise at 75mph? Looks dope JDM 4lyf

Why not just do a mild 2 inch lift to prevent from having to trim?

Mounted 265/75r16 tires on my stock suspension/stock rims (offroad) and had no rubbing, mounted the exact same tire onto my 16x8 -25 offset rims and had some rubbing. Now that I have a lift, I can't decide between 285/75r16 or 295/75r16.

Which camper shell are you running?

It's that the same for a 2nt gen

Why didn’t you go with 17’s?

What load rating are your KO2’s?

What exactly rims are those?

the te's look like -20 ones

Nobody seems to be talking about pizza cutters (255/85r16) anymore. Seems to be the best way to get some 33’s without rubbing or chopping. 🤷🏻‍♂️

OEM isn’t 0 lol. OEM wheels are 25mm

If you have to do some trimming then they don’t fit

You need to re-gear the truck cost way too much money not to do it correctly. Your over working your Trans, rear-end, engine, upper control arms, rear springs. DO IT RIGHT MAN.

So 275 unless you destroy your truck, trimming = rust

2009 or 2019 bc thats not a 2nd gen