How do your gas tanks hold up? I go through so many of them due to vibration😵 it rips the welds on the bottom mounts and the gas starts to leak😖

@@dannya9514 double bolt it.

facebook.com/groups/1973052219660635/?ref=group_header

thanks ☺ after you put your first one together there's no stopping you 😁you just want to keep doing it LOL

that seems lika lot of oil. 4oz for 1 gal...

@@jakedavis9067 Its not with a Delrato Carb, because the Delrato Carb allows for alot of breathing when it comes to the NT carb you want a 40:1 or even a 50:1

@@jub369 hey I’m having trouble with the mount and I looked up cnc mount but how do they work

Ethan Couture kits are only about 110$

facebook.com/groups/1973052219660635/?ref=group_header

lyriiCkS Jr Yes I have a few more bike's that i built ...

facebook.com/groups/1973052219660635/?ref=group_header

Justin Rodriguez 38 teeth is about right because you have a smaller wheel so the motor doesn’t have to work on high RPMs to go slow speed just like on the bicycle when you pedal... smaller sprocket less peddling you have to do The only downside to that is that you have to assess the motor sometimes up the hill

Danny A ah thank you so much i juts bought a 38t

If you're able to make it a disk braks absolutely it would be perfect but dual standard brakes work good for me since I don't go very fast anyways

I have a stingray aswell, the weight plays a big factor in these, they arent as lightweight as standard or mountainbikes even, but what sprocket tooth size are you using?

If its the stock 44t sprocket that is why, try a 32t sprocket on it, should decrease torque, have to peddle assist start it, but increase your top end

it's a bike berry motor, I cleaned it up a little bit on the inside, widened intake and exhaust ports, compression head with larger fins to cool it down and and Chopper exhaust.

Its a CDH PK80 and ad far as modifications my NT carb is using a 75 jet and oversized air filter.

I honestly don't remember, I know for a fact that I followed the bike Barry KZfaq video recommendations.

I also have one with a motor on it. you have to do some welding otherwise there's no way you're gonna set the motor in. I never started writing it because I wanted to make better breaks

Not for this bike... It comes standard for any V shape frame for the chopper bike I have to buy custom brackets

I used the same mount but I don't put it on the bottom of the bike frame i flip them over on top and clamping it with rivets.

Danny A is it the one that came in the package or a different one

No in my opinion you should always be scared to be on the road be cautious pay attention to everyone around you obey the rules of the road stop turn signals with arms if needed

Im in California😁

Yes

40mph

@@dannya9514 is there a way you can get it to do 70mph to outrun cheetah.

@@theenzoferrari458🤔I'm sure if I see One chasing me I'll be putting out more horsepower paddling than my motor😂😂

@@dannya9514 turbocharger? 2 psi boost? Electric hybrid motor?

Brian Kelly Is this a brain new motor? If it is you have to adjust your clutch plate loosen it up a little... I had plenty of motors they came over tighten you just have to loosen up the flour nut until your wheel stops spinning freely and show compression in the motor.

Do you know if theres a page qhere i can order the while stuff( motor, exhaust, mount etc. do you know the price?? Im really interested so please let me know if u can provide me that info

(Ebay) OCC Chopper CNC Mount For 2-Stroke 66CC/80CC Gas Motorized Bicycle Engine item # 262552262333. $58.99 (Ebay) item # 271314324542 loud exhaust $65. www.bikeberry.com As far as the motor goes it's all preference you will have to Choose for yourself if you want more torque or speed

G Avila pedalchopper.com

G Avila Try (bikeBerry.com)

Only did it for the clutch throttle cable was long enough

OK thanks

80cc zeda engine sir

Smiley Brothers Lawn Care What it really means is 66CC advanced to have the power of 80CC sort of speak.

Danny A gotcha. What upgrades make it as powerful as an 80cc?

In reality you will not be able to get it to 80CC but you can get pretty close with that you have to pick the right motor... 1st you need to change to a higher compression head 2nd you need to port it out/opening exhaust and intake valve holes wider/ notching a piston/high performance carburetor/ High performance spark plug

Yeah, I'm thinking of buying one of these engines. I will probably go with the upgraded 80cc How does the clutch mechanism work? Can you release it slowly? Or is it like either engaged, or disengaged, with no middle ground?

2 stroke engines come with the cable clutch that you release slowly and 4 strokes have it Built-in If you want good quality motors check out bikeberry.com if you don't wanna spend more than $100 eBay will do just fine

Саша Тимофеев What's the difference in the cylinders?

because I have a large sprocket on the back and it tops out very fast but the good thing about that I don't have to Pedal too much even going uphill

I use a 41tooth

Otis Rush On my other red one I also use 41t and it’s a lot smoother ride... less vibration!

2

8 stroke lol

no not for pedal assist

Did you hear what that asshole said behind your back?

What’s it supposed to sound like? Is he running rich

most likely head gasket leak along with too rich

Thanks

Yeag you are bro