My tuned one reached 45mph. Still loads of work to do. 😅
@joeyholthusen649511 ай бұрын
Give it a full port n polish, and take 15 thou off the head to increase the compression. It will awaken
@tonytaylor508711 ай бұрын
Comin up soon 😊
@happyjourneygateway10 ай бұрын
I'm still waiting for a double spark plug head video
@tonytaylor508710 ай бұрын
I’ll squeeze that in here soon enough. Thanks for the reminder.
@ShouldHaveBeen11 ай бұрын
I would love to see the same video concept for a four stroke platform.
@tonytaylor508711 ай бұрын
Just did a video of the main two 4 strokes we have in the site. Care to elaborate what’s on your mind?
@ShouldHaveBeen11 ай бұрын
@@tonytaylor5087 Maybe I'm just that new to bicycle engines or I'm showing my naivete, but I have some difficulty finding after market parts specifically for the four stroke engines. It seems like there are more 2 stroke parts, but again I'm a novice and not very mechanically inclined.
@tonytaylor508710 ай бұрын
You’re spot on. There’s very little 4 stroke performance parts available at this time.
@ShouldHaveBeen10 ай бұрын
@@tonytaylor5087 Don't get me wrong, the four stroke was the perfect engine for the hills I live in. It didn't fit on my Schwinn Corvette, but it went on my girlfriend's Schwinn just fine. Maybe it's time to see if a 2 stroke fits on my bike. Your videos are great in any case. Keep up the good work.
@bryduhbikeguy10 ай бұрын
Thanks for the test video Tony.I use the CDH Power Reed valve that's the exact 1 you are using and it Does make a big difference,plus you don't get the blow-back from the carb coating your bike. My question is about the X-Port and the stock muffler.Would you do a run with that for us?Thanks.
@tonytaylor508710 ай бұрын
Thanks buddy! Hmm stock muffler w/ X port. I’ll fit that in somewhere on one of the next performance video. Actually I’m getting ready to do a complete exhaust comparison of every model available so maybe throw the X port in there. Haha I’ll let you know 😅
@AC-jh3pn2 ай бұрын
Thank you so much for this channel!
@sephiroth19851025144 ай бұрын
Eliminated rear brakes completely (don't worry I don't plan to LEAVE it that way forever; just wanted to make sure it would get and STAY running) along with the shifters. It's now a "single speed" 18 speed. Just have to be EXTREMELY careful on the front rim brake not to do a "stoppie" which I've been fortunate with so far.
@VladimirKashevarof5 ай бұрын
I am really in love with the v2
@JMB67610 ай бұрын
Hey Tony, good video I’m curious though maybe I missed it I was wondering what size rear sprocket you’re running on your bike that you’re testing with the blue F Zero?
@tonytaylor508710 ай бұрын
36 tooth 😊
@oimpastato11 ай бұрын
Very interesting. Thank you!!!
@angelagk488410 ай бұрын
i have stock 80cc (i think stage 2) stock muffler, same stock intake and stock carb, and i can get about 51-53 kph (around 32mph)
@ianlindsay94315 ай бұрын
Where did you get the Reed intake?
@VladimirKashevarof5 ай бұрын
I really think that the v2 should get the attention that the others get. The 66 80 ccs you know? Upgrades and what not
@4514rooster10 ай бұрын
I just got the v2 and can’t find any poo poo style exhausts that fit that style muffler is there some sort of adapter I can buy to make them fit?
@tonytaylor508710 ай бұрын
One is in the works.
@4514rooster10 ай бұрын
@@tonytaylor5087 cool I’ll keep my eye out
@joshuamoon84428 ай бұрын
Did you window the piston when you put the Reed valve in?
@motorizedbicyclenation53cu9010 ай бұрын
Porting pipe head carb top 4
@chrishenniker59444 ай бұрын
Are there supercharger kits for the four stroke engines? Forced induction would be pretty cool on an 80cc four stroke engine.
@roastedboiii10 ай бұрын
Had a question about the electric start motors. can you swap out the cylinder wall and head for a different one of the same cc? since the electric start is all one block. would it be possible?
@tonytaylor508710 ай бұрын
I’m not sure. At the moment I don’t want to tear mine apart to see. Once I need to crack it open you can bet that I’ll check. Just don’t know when that’ll be.
@roastedboiii10 ай бұрын
@@tonytaylor5087 ah alright, just didn't know, would be nice to know
@johnreyleosala29357 ай бұрын
Hi. What is the model number for the shimano shifter... Thanks
@rubio787Ай бұрын
I have a 100cc engine. How would I know what type of engine I have so I can order the correct parts.
@tiger777711 ай бұрын
Where do you get the front engine mount, what sprocket do you use, do you do something to better balance the engine? I run 44t sprocket and with all the good stuff only get 32mph and that gets shakey, on 29r. I
@keeganhache666710 ай бұрын
Try 40T
@luukuh9557 күн бұрын
@bikeberry can u make me a 100cc 2 stroke stage 5 racing bike with performance parts and a good carbon I’m a speed professionist and me and my guys race all the time I would love a bike with power!
@fernandovargas47318 ай бұрын
Thank you
@Moldova_is_based5 ай бұрын
Make it backfire 🔥🔥
@J.NPHOTOGRAPHY4 ай бұрын
Where did u buy the exhuast
@TG-wy3bk11 ай бұрын
Have you tried to run it with all mods minus the Reed spacer? Also any plans to tune that pipe to the engine?
@tonytaylor508711 ай бұрын
This is the very first mod test. I could try removing the reed intake and see what happens. My guess is it would run rougher. I’ve never tuned a pipe. Who can I learn from?
@rdhudon746910 ай бұрын
@@tonytaylor5087 After you run your mods for the carb and pipe do a `Plug chop`Pull the spark plug and examine it . If it is black you are running rich and jet down . If it is light grey you are too lean . If it is a brown coffee color then you nailed it . I think that is the basic tune before getting into timing etc..You can find pics posted of the plugs in their different states for reference.
@tonytaylor508710 ай бұрын
Yeah I hear ya. Will def do a plug chop to start fine tuning it. Thank you 😊
@KevinTodd11 ай бұрын
👀
@matthewsteva3684 ай бұрын
Get a rotary engine on the website
@GEEBUZ892 ай бұрын
Bro that chain setup is super sketchyyyy .....you should shorten it and eliminate those type of chain tensioner are just anither thing u have to be taking care of and they alway faill
@4514rooster10 ай бұрын
Will the ccx port make my v2 adapt to all mufflers?
@tonytaylor508710 ай бұрын
Nope. It’s a different fitting.
@4514rooster10 ай бұрын
@@tonytaylor5087 I got to figure out how to get a poo poo exhaust on my new v2
@tonytaylor508710 ай бұрын
They’re working on an adapter 😊
@nurzrachit71336 ай бұрын
I want to build one that does 80mph and is dependable 😂😂
@timedrifter1175 ай бұрын
Honestly get away from the Chinese stuff if you want to be dependable So like full-on minarelli stuff
@drohrstestes10 ай бұрын
One for the 100cc V2 would be nice. As it sits i see no difference in mine at all. Can't use another exhaust pipe on it because it's mounted differently than everything else BB sells.
@tonyromeo14008 ай бұрын
I recently bought the 100cc v2 blindly and I’m kind of kicking myself in the ass for doing so. I am going to try to cut and weld the performance expansion pipe to fit the engine “fingers crossed”