For almost $300.00 this is probably the best kit but I saw one for $150 that got 4 1/2 star rating with 36 reviews. Sure it didn't have battery w/ electric start (pedal start) but motor is same size and that statistic shows a lot of happy customers.
@Mad-Duk_Machine_Werkes7 жыл бұрын
Fuel Filter is backwards-
@darkwatersband7 жыл бұрын
i noticed that too
@connorssmallengines66634 жыл бұрын
Does it matter?
@jimjensen10964 жыл бұрын
@@connorssmallengines6663 Yes it actually does make a difference. There is an arrow indicating fuel flow direction, to reverse that would make the filter less efficient and prone to clogging.
@bobbythompson42683 жыл бұрын
Jesus neitha
@thestalicho6 жыл бұрын
Make sure the masterlink spring clip has the CLOSED end in the direction of chain travel.
@integrationofmanandmachine47143 жыл бұрын
yes
@kristianwhiskin10705 жыл бұрын
😂😂 when he mentions about the battery lol, should see the spark i get when i connect the cables on my 54v ebike battery and that still doesn't hurt you
@kinadafurry73533 жыл бұрын
True lol
@vinylexperience776 жыл бұрын
Never tighten a spark plug as tight as you can on a aluminum head, you will strip the threads.
@chrisparlow62826 жыл бұрын
Marty Wickstrom Well said and so so true.
@expautojv5 жыл бұрын
And the friggin gasoline filter is backwards!!!!!!
@expautojv5 жыл бұрын
It'll blow the Filter Fabric up inside of the plastic instead of keeping it compressed like it would if it were flowing the other way around
@punchogunter23625 жыл бұрын
That aluminum head on the plug is durable but platinum heads are better and last longer and won't burn out as fast!
@SilvaDreams5 жыл бұрын
@@punchogunter2362 He was talking about the engine not the spark plug... *facepalms* Besides they don't even make aluminum spark plugs, platinum is good but iridium is much better and will likely out live this engine and a few dozen more.
@JohanGavieres7 жыл бұрын
Awesome video. Picking up a bike today and ordering a kit on eBay to start this build. Thank you for a great video.
@bobbythompson42683 жыл бұрын
You’re welcome lad
@ajsalazar827 жыл бұрын
I just bought mine and got the president day discount paid 238 total. thanks bikeberry
@timostrom57106 жыл бұрын
i build small 2t motorcycles as a hobby/way of life. my favorites are tomos, puch, derbi. i've seen a few "bicycle kits" in action, and they never seem to run very well. it's good that there is a piece you can buy to avoid bolting the sprocket to the spokes. that element of the design was always a deal breaker for me. 12v batteries can't shock you. good vid tho.
@johnsshed9956 жыл бұрын
why are you using an ajustable spanner and pliers on the fittings instead of the correct size spanners or sockets ?
@bikeberry6 жыл бұрын
We want to show that installation is possible, even with a limited selection of tools. We always encourage the use of the correct tools, as they will reduce the likelihood of injury and damage to parts and will make the processes an easier task.
@TheUncleBigBad2 жыл бұрын
@@bikeberry good answer.
@lccdan111 ай бұрын
I just bought this kit from bike berry and I'm in the middle of the install. So good so far...it looks like a good product. I not sure who does these videos but please buy some tools!! I have not tightened a bolt and a nut with an adjustable wrench and a pair of pliers since I was 8 years old.
@yapandasoftware6 жыл бұрын
Nice engine kit! I'm buying one!
@EllaBananas5 жыл бұрын
The shutoff switch doesn't work because you wired it up wrong. You wired up the light switch instead of the kill switch XD
@Mr_Meowingtons5 жыл бұрын
LOL i seen that too
@lucajo164 жыл бұрын
can these engines take a light? Id consider buying one if they can take a light.
@nostalgiaholic48743 жыл бұрын
@@lucajo16 yes they can
@ABCDEFGHIJKELA...7 жыл бұрын
you can substitute a dull pencil in place of screwdriver when truing the rear sprocket. make sure the pencil has a broad, dull tip. wipe off the marks with damp cloth after each modification.
@riverratmarine72592 жыл бұрын
If u hook up the positive+ first the the negative "ground" - last you will get little to no ark when making battery connections
@henrisivusaari18462 жыл бұрын
It will totally explode
@MichaelGrant_mlkgrant7 жыл бұрын
I think the electric start is awesome...
@VirantRoss5 жыл бұрын
Michael Grant yes, im considering pulling the trigger on an engine for my bike but it sure is tough to choose and I feel scared. Its gonna be hell getting it together or be a piece of junk if im successful.
@chokycoki174 жыл бұрын
Welll That Starter Works Better Than My Honda City Starter :v
@foxzerox10003 жыл бұрын
How would you upgrade to a different exhaust?
@duskycotw84047 жыл бұрын
This guy Really helped me out Thank you Bikeberry
@maccrume17717 жыл бұрын
The kill switch is supposed to be the red switch and the current kill switch is supposed to be for lights
@mikem54757 жыл бұрын
Mac Crume exactly, these idiots selling the kit are obviously are just oblivious middlemen
@diegodelapuente16656 жыл бұрын
Hey, it sounds like you own one of these billet trains. The bike berry website does not talk about how the batter gets charged. Is there a generator in the engine or do you have to charge the battery externally?
@georgioschitas6 жыл бұрын
Mac Crume Mr ni
@sergiumaximov21216 жыл бұрын
Do you know the correct diagram?
@dw28435 жыл бұрын
Yeah lol. These guys are useless. Also, they're suggesting that a 12V battery is dangerous to touch. Such morons.
@markus36667 жыл бұрын
Just bought one of these! Can't wait to get it in the mail!!!
@bobbythompson42683 жыл бұрын
How’d it go?
@robertyoder51707 жыл бұрын
could you guys make a video installing this kit on the BBR Tuning Complete 26" Motor-Ready Bicycle w/ 2.4L In-Frame Gas Tank (Black)
@Ryanb8956 жыл бұрын
This kit dosn't fit that frame which is very disappointing
@carmelitacalzado37456 жыл бұрын
How can I get bt motros phone numbers i have 1 and it's not working can u help me out pleas think you
@scottfirman7 жыл бұрын
A lithium battery from a drill wpuld work better and take up less space then a regular battery.
@xx2sloxx7 жыл бұрын
Why not leave the ground wire unhooked till you hook everything else up?
@MachineShopChris6 жыл бұрын
I was wondering the same exact thing..
@av49266 жыл бұрын
Because then he wouldn't of been able to show you how the battery makes sparkles. Where's the fun in that.
@riverratmarine72592 жыл бұрын
That would be to easy. Besides makes him feel like a bad ass being able to weld
@bojangles16234 жыл бұрын
What kind of motorcycle oil goes in the clutch case?? Bike berry??
@noeltheshemale7 жыл бұрын
that's pretty cool with the electric start. kinda bulky with the battery and the electrical box.
@robertyoder51707 жыл бұрын
can you make a video of this kit being installed on a BBR tuning motor ready frame
@knoxmedia82606 жыл бұрын
cool build
@cymoncyrado28796 жыл бұрын
A nice disc braked doner bike would be suggested but anything other than just a rear coaster highly recommended.
@joezambrano696 Жыл бұрын
Hey buddy can you please tell me how to hook up the clutch cable nobody in their videos about the bt80 mentioned the clutch cable
@mjmk5553 жыл бұрын
Is it compatible with the bBR tuning motorized bike frame yes I'm referring to the one with the built-in gas tank
@jonathanmcnabb91533 жыл бұрын
That battery seems so vulnerable mounted where it is. Also....I wonder if you can custom order throttle cable lengths for ape type bars....
@jaredshelton47186 жыл бұрын
Well, you installed the fuel filter upside down but whatever
@RexFixx3 жыл бұрын
Yea i saw one same guy in yt
@logancurran2 жыл бұрын
ant the most important thing is that little metal piece in the fuel filter, its a magnet to catch any tiny metal pieces that. old have been in the fuel tank
@hiramjr5790 Жыл бұрын
yall wrong in wveryway
@darrenmillion14327 жыл бұрын
Nice and all but I will stick to my Reg motor smaller and lighter plus there is performance parts.
@freqeist6 жыл бұрын
you got a sub great video.
@gregmorgan72814 жыл бұрын
watched 5 videos before i finally found this one that actually shows how that damn needle valve on the carb goes....not one of the 5 others showed to line up that groove with the guide inside or how it works.....i had hell....when i first started the bike it took off so fing fast cause the valve was stuck....i almost killed myself......anyways just wanted to THANK YOU FOR A VERY GOOD VIDEO....finally,,,,,this is the one to watch!!!!!!!!!
@heavystarch1004 жыл бұрын
Im sorry glad your ok but....🤣🤣🤣🤣🤣🤣
@markusgarvey7 жыл бұрын
I would fill the pedal crankshaft housing with Moly grease.
@justinfewkes35357 жыл бұрын
Mark Estrada when I was watching it I was just imagining there being a grease fitting as a joke
@terencekaye99482 ай бұрын
Add, put the washers and nuts on at the same time! Add, put spacers in between the hub and sprocket to get perfect alignment.😊
@daveleighton46836 жыл бұрын
You have two spare wire positions left in the loom near the relay, a blue and a green. I'm sure you can use them for a light which will run directly off the battery.
@bikeberry6 жыл бұрын
You are correct. Most of our product videos should be taken as a general outline, as most of these parts are manufactured with room for future custom modifications.
@pascalezewulu76476 жыл бұрын
Hello BikeBerry! Could you please upload a video on how to connect light and speedometer through the electric box?
@jesusarmendarizjr37132 жыл бұрын
We're do I connect the red wire from the engine too?
@dannyoutlaw99194 жыл бұрын
What do I have to do to get the new hp carb to perform as good or better than the nt carb
@glennallen51316 жыл бұрын
Is there a way to put a transmission on the bike so you can use the gears on the bike and leave your disk brakes on the back wheel
@scabobble39127 жыл бұрын
handle bars are upside down.
@Bread453 жыл бұрын
No just no
@jondee34817 жыл бұрын
to everybody who is installing this on there own USE BLUE LOVE TIGHT on every bolt and nut if you do not use lockight it will fall apart DO NOT USE red locktight IT will break bolts blue locktight everything lockwashers are junk and do not work that well if you have any questions I am a mechanic with many many years exp building custom bikes scooters and motorcycles just send me a message I am not talking any trash about the person who made this vid it looks like thay installed the kit correct just use lock tight on everything if you don't want to be walking down the street looking for the missing parts that will fall off good luck
@MachineShopChris6 жыл бұрын
Great advice. If you do happen to use red lock-tite and you're having trouble removing anything, just apply heat to the area and it should break loose easily.
@devynanderson76666 жыл бұрын
jon dee what is the difference i am buying one soon and i would like to know
@joblessalex5 жыл бұрын
Love tight, my favorite.
@fredcdobbs8235 жыл бұрын
The red is polyester urethane, the blue silicon
@eduardodiaz57625 жыл бұрын
Listen to this man, Loc Tite That bike up the Blue One NOT the Red super strength one. Loctite is your friend, also change the Chain its garbage buy a HD 415H motorcycle Chain+ heavy duty Chain Tool as well.
@thisguytrucks8844 Жыл бұрын
Best video ever thank you new subscriber.
@clydeusa65966 жыл бұрын
Good vid. Only thing is never over tighten any spark plug. Could give you problem later
@bikeberry6 жыл бұрын
#TrueFacts
@Steveah915 жыл бұрын
get a big 1/2 inch 20-30 mil axle socket and put inside that plate..over ur hub. like aligning ur clutch.
@Johnjohn-eo6mb4 жыл бұрын
I have the same engine kit what oil you use during break in period
@robertmiller45805 жыл бұрын
I like the size of the engine but not the battery box because of wanting to use it for hunting/scouting for deer can it be used with out the battery box and battery and still run?
@bikeberry5 жыл бұрын
You can always pedal.
@ajsalazar827 жыл бұрын
any tips or videos on drilling the hole into the handlebars? I don't wanna mess that up
@riverratmarine72592 жыл бұрын
Center punch where u want the hole to be and start with a very small drill bit and go slow with little to no pressure
@Carl-Romero2 жыл бұрын
Can this be installed on an electric bike that has its battery on behind the frame and the hub motor in the rear wheel?
@charlesbritt46746 жыл бұрын
On the axillary wires which would be the positive and which would be the negative because I'm trying to hook up a light setup that has brake lights and turn signals include?
@bikeberry6 жыл бұрын
Contact our customer service representatives for step by step trouble shooting and help. 1-800-317-0479
@scottfirman6 жыл бұрын
That carburetor needed adjusting,you could hear it bogging while giving it the gas. Fine tuning those can be a headache.
@bikeberry6 жыл бұрын
Just as you said, "fine tuning [a carburetor] can be a headache," that is why we neglected to fine tune it for this specific install video. We are currently working on a video for tuning a carburetor. Stay tuned and check back for our new videos.
@ronalddaub37896 жыл бұрын
RC Hobbyist Extreme if you raise the needle to the next to highest position it always runs better .
@michaelcox84786 жыл бұрын
RC Hobbyist Extreme
@trevorwall875 жыл бұрын
I do wonder how it would run with a pocketbike nitro carb
@the_true_moe67155 жыл бұрын
If u tune rc cars, bikes should be nothing to you 😂, them little nitro engines are a pain
@danielcollins9307 Жыл бұрын
Can anyone recommend a good disc brake bike to use for this build?
@FZ400R-UK7 жыл бұрын
Hooked the engine kill switch to the headlight switch instead of the big red kill switch provided..?
@kxlucifer7 жыл бұрын
スコット it all on where you to wire it to.
@baffen32487 жыл бұрын
How fast dose IT go?
@ganeshgavara6 жыл бұрын
Does the battery charge back when riding?
@gordondeitz7838 Жыл бұрын
Would this type engine work well for a no pedal build?
@carstencastaneda85146 жыл бұрын
I don't see these bolts and nuts being tightened all the way, should I finish tightening them with a wrench?
@noeltheshemale7 жыл бұрын
so if you remove the coaster brake, then it becomes like a freewheel?
@homicidalking14665 жыл бұрын
Noel-The She-Male no it doesn't I thought the same then but it just makes it to where u can literally pedal backwards it's weird but I had a lil fun on mine BC i took the poster break off and spent an hour trying to rride my bike backwards
@Zdendasoft Жыл бұрын
Fantastic!
@grabir017 жыл бұрын
Right at the start of this video, it looks like the clutch has hooked up and the bike is getting away from the dude... What is up with that? Is there an auto clutch adjustment to be made?
@bikeberry7 жыл бұрын
LOL we tried to do a burn out with it and failed... miserably. They enjoy making me look like a tool.
@twotut20025 жыл бұрын
Would this make for an easy mini bike engine swap
@psykowheels13577 жыл бұрын
So when you put motor oil in this thing do you still have to pre mix the fuel in addition to that? Or do you just put oil in the crankcase and straight gas in the tank?
@bikeberry7 жыл бұрын
You still have to mix it.
@kxlucifer7 жыл бұрын
ZER0 2 stroke are good winter beaters if you live in new england region of america because it can get so cold you dont wanna wrench anything i.e drain plug and tjen funnel the oil in.my 4 stroke is my summer toy winter ill beat on tje 2 smoker.
@gregoryhalye89076 жыл бұрын
The oil going into the crankcase is for cooling the engine itself internally and keeping the moving parts inside moving smoothly. The oil you add to the gas is to keep the pistons running smoothly. Do not skip adding oil to your gas. A smart modification to your bike would be to add some kind of storage rack or case on the bike, where you can carry an extra bottle of 2-stroke oil and/or a spare (appropriate) container of mixed fuel. Other smart modifications would be to add an LED headlight and tail light assembly, plus turn signals, and if you wish it to be a street legal bike mod (this is over 49cc) you will need a license plate. Check your local DMV for requirements in your area. As their build is, completed, it's perfectly legal to ride off-road or possibly during daylight hours only in most areas, or quite likely without much in the way of restrictions way out in the boonies.
@jasoncunningham67142 жыл бұрын
Wow... ok folks 2 stroke mix oil is for 2 stroke engines and 4 stroke engine are lubricated from the oil reserve in the crank case and it is different kind of oil. Use synthetic 2 stroke mix oil to reduce smoke
@foxzerox10003 жыл бұрын
How would you upgrade to a different exhaust?
@kayleegeers18277 жыл бұрын
this a cool engine kit
@mdanwarnicrh7 жыл бұрын
K aylee Geers
@chiamingliu67465 жыл бұрын
Wow, what a classic
@markus36667 жыл бұрын
at 18:50 when he funnels oil into the engine, is that 2 stroke oil?
@petermoran22045 жыл бұрын
Nice job...
@roccoseals77537 жыл бұрын
will this kit come with everything
@Fuellable7 жыл бұрын
Do not tight the spark plug as tight as you can. It will strip the threads in the head.
@JSLRSMNW6 жыл бұрын
Yes, finger tight then half turn with socket
@thejonesshield50386 жыл бұрын
lol i will destroy anything with those torque specs.
@currentbatches62056 жыл бұрын
Sells new cylinder heads that way.
@dadeynwilliambusseybiggar75013 жыл бұрын
Hey what kind of engine oil would b used? Doesn't say in the video
@Matthew-wj8cm5 жыл бұрын
Do you huys ship to Czech Republic? I want to buy this kit and no third party Sellers ship here.
@catburglar57646 жыл бұрын
Always hook up the negative terminal on a battery LAST, and take it off FIRST. Basic safety rule.
@jesusarmendarizjr37132 жыл бұрын
My wires got burned from the exhaust, we're do connect the red wire from the starter too?
@PhilipHutton7 жыл бұрын
will there be room for a jackshaft kit??
@matts.9965 жыл бұрын
why in the all hell would you do that with this
@jerryb12342 жыл бұрын
I have two of these BT80 electric-start kits from 2017, and out of all my bikes, the BT is my go-too bike by far, mostly because I'm just lazy, but they are a much better quality engine than the China-doll 2-strokes.
@philipaldrick53632 жыл бұрын
OK, so where can I get a BT, please Jerry B123?
@philipaldrick53632 жыл бұрын
I have a Gomier trike and I hope to fit the BT in it.
@johnharrington47577 жыл бұрын
Does the battery clear speed bumps?
@pauls57456 жыл бұрын
mount it on a rear rack or higher up on downtube. bad location under crank haha
@johnharrington47576 жыл бұрын
Yeah the rear rack idea is probably best it will also look better
@bholaghosh88866 жыл бұрын
John Harrington
@fixingbikeswithmentalhealt48807 жыл бұрын
can you still use the bike as a normal bicycle like the other engines or do you have to stick to using it as a motorcycle
@communistk98886 жыл бұрын
you can still peddle
@ZRayTheBosS5 жыл бұрын
So did the battery come with the kit or did you purchase it separate?
@bikeberry5 жыл бұрын
The battery now comes separately due to knew shipping regulations.
@ferdinandtoribio78006 жыл бұрын
Sir good work. Sir howmuch the engine. And howmany cc. Thanks
@eisengallardo53275 жыл бұрын
That is one of my dreams😮
@jeffreymitchel38155 жыл бұрын
Can you modify 2 stroke bicycle engines to electric starter?
@daniedelarosa6502 жыл бұрын
does your starter motor keeps on spinning? i installed one of those but there's a noisy sound its like the starter motor is spinning when i throttle.
@thegreenlantern97097 жыл бұрын
for anyone with experience please help me, I wanna k if this modified bike practical, does it go on the road without problems ?
@markus36667 жыл бұрын
I'm not super experienced, but I've researched a lot and this should be coming in the mail soon. As long as you take proper care and maintenance of the engine, it should last quite a long time without major problems.
@GastonPlacide6 жыл бұрын
look nice but wat about if it rain or snow and i have to go to work why not make a cover too
@bikeberry6 жыл бұрын
In general, we would always advice riders to refrain from riding in bad weather, due to the increased danger and possible damage to all moving parts, even those not associated to the engine kit, such as brake cables, brake calipers, chain, and internal bearings.
@vicentebinladen13527 жыл бұрын
I bought one and it only lasted 2 weeks before the bolts self vibrated off so i recomend welding your engine and gastank for extended performance
@kxlucifer7 жыл бұрын
Vicente Binladen wow.you should know to loctite blue all nuts and bolts so it wo t be ever rattle itself out
@jasoncunningham67142 жыл бұрын
Worried about welding on fuel tank incase of hazard? Fill it with water first...
@johnnyricketts16 жыл бұрын
Good job
@kcscustombikes3 жыл бұрын
What oil do we put in the actual motor itself?
@1122334455yuo7 жыл бұрын
wow theres an electric start now?? i gotta get one of these kits..
@bigbulldozer97087 жыл бұрын
Yuo don't it's shitty get the older proven style.
@1122334455yuo7 жыл бұрын
okay well thanks for the heads up lol
@1122334455yuo7 жыл бұрын
I already have a bike that has been with me for 6 years now :) I had two but the other got totaled due to a car hitting me
@kxlucifer7 жыл бұрын
Yuo the best i tried so far is 4 strokes theyre slower but reliable.all engine require prpper break in tho.
@jasonjamescooper64577 жыл бұрын
if you can fab and weld I have put 6.5 HP ohv w/centifical cluch fab 1/4''stainless steel plate with slotted holes for adjustable motor mounts and reached speeds of over 40mph I use a jack shaft set up to get both low end toruqe and hi end speed
@justinchampagne28185 жыл бұрын
if you look in the manual says 70 cc and in struction book for this engine kit BT80. I bought the kit and I looked in instruction book and that's the reason why I know about it
@bikeberry5 жыл бұрын
Sorry were a little confused, is this a question?
@justinchampagne28185 жыл бұрын
Look at the instruction book and come to the bullet train BT80 kit it says 70 cc in the instruction book just want you to know that it's a 70cc for the engine size .
@justinchampagne28183 жыл бұрын
You going to get any more in-stock on your website cuz I'm looking to buy another one bullet train bt80
@jkoeberlein12 жыл бұрын
How about packing the bearing with grease?
@wrestlemaniac2022 жыл бұрын
Will you ever put a manual clutch on these engines? Love to have the the electric start feature but feels more like a motorcycle with a manual clutch with electric start
@thisguytrucks8844 Жыл бұрын
I just received my kit today wondering why it smells like gas? Any idea please
@geneseale96512 жыл бұрын
What about do you have to have a license a tag?
@Abdulsalam-jc6le6 жыл бұрын
very nice
@23mattortiz6 жыл бұрын
Will this fit on a stretch beach cruiser
@bikeberry6 жыл бұрын
As long as the bike is a men's 26" with at least 11 inches of clearance from the top tube to the bottom bracket there should be not issue.
@towboatjeff4 жыл бұрын
Shouldnt the last connection in the electric system be the battery, not the first?
@ryansdadismean5 жыл бұрын
He put the fuel filter on backwards, how do you stop safely without brakes, and I bet those unknow switches on the killswitch can be used for a headlight that can be wired pretty easily into that system.
@Odtt--Lif2 жыл бұрын
What wires do I use to hook up spark plug where does the yellow wires go
@larryshaver35682 жыл бұрын
do you sell those seat posts? i'd like to get one
@philiprussell75574 жыл бұрын
does anyone know how to keep the exhaust on the motor mine keeps vibrating off
@titytoucher16 жыл бұрын
Does anyone know if this motor is compatible with a SBP jackshaft kit?
@bikeberry6 жыл бұрын
We have not personally tested the combination, though from our understanding the SBP jackshaft kit is a universal attachment that works with most 2 stroke motors and should not have an issue with compatibility.
@estevangallegos5746 Жыл бұрын
My battery and electric components are all set up correctly but the starter won’t engage, any tips?
@amosbik53925 жыл бұрын
Do you need to do anything with the clutch ?
@bikeberry5 жыл бұрын
You may need to do clutch adjustments after installation.