If you are having trouble creating a 2nd model, You have to press and hold cancel to actually get the radio to switch to the 2nd model and then you can bind to new model. Same goes for switching to 2nd model once bound, select the model you want to fly then hold cancel to activate that model memory!

Thank you. Got my i6 today. Just updated my i6 firmware and got 10 channels, and was playing with receivers. I found it would only remember 1 receiver at a time till you showed us this... Puzzle solved. Wish the manual was better thou... Cheers

The Eachine and Turnigy are rebranded Flysky FS-i6 transmitters. My FS-i6 doesn't require me to hold the two trim buttons to get into the menu. If the display goes "dark", no back lighting, press the Ok button to activate the screen. Then press and hold the Ok button for about a second and it goes into the menu. Have you tried that? :) When the back light goes out, it essentially goes into a sleep mode. Except when it is bound and controlling the quad. But it's nice having one controller for multiple aircraft isn't it? :) One of the idiosyncrasies of these radios is on some menu items you have to hold the Cancel button to save. Not very intuitive, but that's how it works on mine. I would bet most of the FS-i6 functions are the same on the Eachine and Turnigy radios.

Thanks a million!! I spent hours trying to figure out why my 2nd ARF would not bind

Thank you!!! you safed me from a lot of binding^^

Thanks ^^ I needed that!

Awesome job. Looks easy enough. Let me just say that you sure do a great job with editing and commentaries on your instructional videos. Thanks so much for taking the time to do it. Peace

Can we bind two Recievers to radio simultaneously? i.e on same model number by just binding at same time

Very helpful, thanks

How did you wiring up escs on that frame?

I have the same scenario as you presented in your video, one exception my ARF racer 250 didn't come with the receiver adapter, my question is, and I'm a bit nervous of messing up my RTF quad settings doing this, is when the binding of Eachine 2 takes place are the settings the same for #2 the same as #1 or is it necessary to configure the radio to #2.

Off topic question, but is there a place to find extra eachine frame parts. I have been gluing mine to repair it buts its gotten pretty bad. Just wondering.

where's the link for the video on how to bind the transmitter? it's not in the description

Will this work if both drones are turned on? I’m trying to do this for my excavator and dump truck to save me hauling two tx’s around

To get the menu to display don't just hold the OK button, press once, then when the backlight has turned on press the OK button again, it only works when the backlight is turned on.

thats odd... my eachine ia6 opens the system menu bit without the trim button thing?, something else i forgot to mention before you delve into librepilot, you can rotate the FC board so that the usb port is facing the side, for ease of access, also, before you use anything on librepilot, when you open it ignore the wizrad set up and just go straight inside to see how it is set up now, i believ you can save a copy of your settigs straight away before you start changing anything, i would advise you not to change anything if you don't need to, its most likely tuned the same way your rtf one is, i also had an issue with failsafe on the tx, it was set to fly away, it was hard to find in menus and vague even after i sorted it, do the tx switch off test just so you know its gonna land if you lose signal, please take a note of settings if they are already preprogrammed, i am interested to know what the rattitude settings are, the section that offers a slider for attitude/rate/deg persec... the slider says normal snappy insane... i have mine set to 450 for rate and 450 for deg/sec i would be interested to know what the stock settings are for the 250 racer.... ps.... if it has no pre-installed stuff.... copy them from your rtf model and paste them into new one.

Where to buy this eachine i6 transmitter??? The link given below is not for eachine i6, the given is only for fsi6, that I already have,. And fsi6 is not able to connect eachone models, or there some hidden features??? If there are some hidden features in fsi6, then please guide me to connect eachine models.

Does the receiver has to match the transmitter?

Great refresher course... I'm picking up my Lizard 95 tonight and this helps it's an all EACHINE family I've got going x220. Cheers

THANK YOU!! SOOO MUCH!

It’s weird that you have to hold down the trim switches when you plug on. I just hold down the OK button for a few seconds to access that menu

I have a question, what if you wanted to bind 5 receivers to 1 transmitter to drive them at the same time? Is it possible?

On "Type Select" in the Menu, What type should you use for a quadcopter?

I brought new receiver I bind it and the led in the receiver is not flashing anymore but I don't have any signal in my quadcopter, need some help?

how do you set up arming. mine did not work out of the box like this

what drone is this bro?

jeez what drone is that? looks lovely

Does this transmiter support telemetry??? Pls anyone let me know

how do you know what quads the transmitter can bind to, is there a library or anything? regards Nige

Do u have to program it first to computer be you trigger the motors

What receiver did you use? On eachine i6

clear and concise video! do you know if the eachine i6 will work with receivers meant for the Flysky fs-i6 since they are nearly the same transmitter?

can the bayantoys x16 be binded and controlled with this tx? as I just bought one in a package deal

i have a drone but it wont connect to it can u help me sir

And what model i should jave it helicopter

I cannot select different models on mine. When I'm over model 2, and the remotes on model one and I hit ok, it does nothing. It will not connect to the second model.... is my faulty?

been watching your binding videos all night ,,just got myslef an "rtf" zmr250 and i think ive unbinded it when i was messing around one night i can arm it through cleanflight but no response from my transmitter when i try arm it that way ...hopefullly a rebind will sort the problem :)

well if you show screen setting. i made my own but do not know how to configure if u know any video can you share pls

sir i have a problem in my fs-i6, after i factory reset it the sensor list is gone, so my receiver cant detect my esc bec. how can i restore my sensor list? when i plug the bec the receiver cant detect and nothing appear in my fs-i6 monitor.

triggers rc reviews can you help me please when you have two quads and you want to swap receivers over do I need to make any changes to the settings or do I just rebind my both quads to the models in the transmitter

Very good video. I RX Turnigy IA6. I can not roping with Eachine i6. as bind. Thank you.

nice video and is this possible with flysky fs i6 ??? thnks

hey could you help me out. I have a goolrc 210 drone quad. a flysky transmitter and fs ia6 receiver. I can't get them to sync correctly. desperate for help. thanks

wish you showed exactly witch poets you bonded it to

Mine just says "RX BINDING" and nothing happens. Never got it to bind before. Tried with 3 different receivers, the Eachine Ia6, Flysky Ia6 and Flysky Ia6b. Any idea what to do? I might just get a new transmitter.

is there a chance that i can control both of them at the same time?

can you pls make another video showing how you setup for drone ? plsss.. i want to configure mine but do not know how ...

Can I bind a FS-IA6B FlySky receiver with a TTX600 Tactic transmitter ?

you don't need to do that to get into the menu, your just pressing the buttons in the wrong way! pressing and holding the menu button when the back lights are out will do nothing, just press any button to bring the lights up then press and hold menu and you will get into the menu system, what your doing with the trim buttons is doing nothing at all!

i was wondering how to do this ... many thanks mate can i ask you if you if you changed to ppm vice pwm ??

hi tigger do you know if you can bind the Eachine I6 to syma x8hg

i tried this exactly the same way but when i choose model 2 of 3 and press OK it Just wont go to another model but stays in model 1. even when i press and hold the OK button. what should i do? anyone?

can i bind 2 very different models to the i6 and the settings for the racer 250 are still there?

how to bind flysky to eachine h8 mini

how this in flysky fs-i6s ?

Nice vid

did exactilly what you said burned out 2 recievers

ThaNK YOu.Uuuu

great vid thanks. this will also bind to certain wltoys models. look up www.deviationtx.com for a chart of protocols.

Nice vid