Bios chip: Replacing it with hot air (including comments)

Рет қаралды 12,608

3 жыл бұрын

In this video, I'm showing you how to change a Bios chip using hot air.
I also try to get used to my microscope using a live video display

Пікірлер: 14

@HerbOldenburg Жыл бұрын

I just completed a bios chip swap using the flux only method here on a Lenovo Ideapad 320 AMD! - I got a replacement motherboard that was bios locked. I worked with Dr.Bios website and a second vendor trying to crack this password but never succeeded. I had a broken 320 AMD board from another recovery laptop I repaired and de-soldered it's bios chip and re-soldered it on this locked system board and can now get back into the bios! - Your video is spot on - Never touched the solder, ran flux, heated and removed, cleaned, ran flux and positioned - applied heat - cleaned and re-assembled - It's working !!! Whooooot - Thanks for showing us this... Fantastic....

@lordnikon9 Жыл бұрын

Thanks for the how-to! I just did my first ever chip swap and it went well on the first try.

@bryanfragata8041 Жыл бұрын

Hi Sir,Can replace with another Bios chip brand or model but flashing with exact Bios Program??

@592Johno 2 жыл бұрын

Awesome music 😂

@user-fh4ov5vx6b 9 ай бұрын

😂

@dombelardo4909 Жыл бұрын

Awesome

@dawsonblanchard5832 2 жыл бұрын

music is amazing hands down I'm gonna try this on e 17R 7720 SE it's stuck in the bios password screen there's nothing else that will work so I'm going after the main brain

@vbinamati 10 ай бұрын

How much AIR and HEAT to be set for chip removal?

@justaguy4real 3 ай бұрын

400deg at 20/25 flow

@aaronmindiola8006 26 күн бұрын

What flux you use?

@NaitorStudios 2 жыл бұрын

What's the recommended temperature?

@Djtil83 2 жыл бұрын

@HerbOldenburg Жыл бұрын

What is +1 ? - I have a Yahua station and it has a temp gauge - and thank-you for showing us how to do this with the heat gun. I took off a good bios chip off a defective board and I had to turn up the temp over 500 for the chip to release - I started low in the 200's because of this +1 and it was not flowing any solder until I got up over 500 - what is the temp with +1. Thank you... - I was also wondering about your microscope and what model you purchased - thanks again and great video.

@ProfuzniChevap 5 ай бұрын

@@HerbOldenburg+1 means he is upvoting, also wants the answer.