BIQU B1 || Best Budget 3D Printer! (Much Better than Ender3)

Рет қаралды 11,812

Күн бұрын

In this video I did the unboxing, installation and review of the Bigtreetech biqu b1 3d printer
Bigtreetech has many products related to 3D printers. This one is Biqu B1 FDM 3D Printer 32 Bit Dual Operation System(marlin and touchscreen mode) and i must say that Biqu b1 is much better than Creality Ender 3/3 v2. Biqu b1 has tft35 touch screen, btt SKR V1.4 mainboard, magnetic sheet heated aluminum bed, and much more.
Buy link - bit.ly/3J5GCeU
Official website - bigtree-tech.com
Contents time:
00:00 - Unbox
05:15 - Set up
13:40 - First run
19:58 - Printing

Пікірлер: 29

@neildarlow 2 жыл бұрын

I have just purchased one of these and can confirm everything that Retsetman has said in this video as absolutely correct. It is one of the best constructed printers I have owned from a Chinese manufacturer. If you take great care in ensuring the gantry is square then you can achieve excellent results. I found that the factory-set E-steps is a little high (96) and that 93 provides perfect extrusion with good quality PLA.

@MaxImagination 2 жыл бұрын

Such an advanced 3D printer! May the quality, speed, and efficiency of your projects go up 👍🏻

@retsetman9698 2 жыл бұрын

Thanks a lot Max!

@fralinsandfriends 2 жыл бұрын

Ah ha, a baby step option for newbies like me. 🤣 I love that octopus. So fun and that beautiful vase.

@fralinsandfriends 2 жыл бұрын

That looks kind of complex, but a lot of fun and uses. Imagine making all your plastic gears. Very good video and review. 👋💖😁

@retsetman9698 2 жыл бұрын

Thanks a lot for your interest 👍👋

@jamescannon2587 Жыл бұрын

I just bought one to replace my Ender 3 pro. It is definitely much much better! I also like the Biqu touch menu a lot better than the Marlin one used on the ender printers.

@muhammettayyipkaya5505 2 жыл бұрын

Great and very useful video

@retsetman9698 2 жыл бұрын

Thanks a lot, my friend!

@the555timer 2 жыл бұрын

this printer looks like a mix of the creality ender 3 and the anycubic i3 mega

@user-jn4ml3yt8k 3 ай бұрын

I just 3d printer and it is a biqu b1 i got it all put together and i was wondering if you could show me how to set it up you know the sren thang and do you know how to work it do you think you can make a video on it please

@djimavicmini1009 Жыл бұрын

how is it so smooth?

@mrnlce7939 2 жыл бұрын

Did the type C cable get hot/warm? I only ask as I'm not sure if it is capable of the higher current needed for the hot end. Great video. Keep up the good work.

@retsetman9698 2 жыл бұрын

i will reply you when i get a long print. By the way, as far as i know it's not a standard type c cable it's something they customize.

@retsetman9698 2 жыл бұрын

I got a 3-4 hour print and everything is fine, the cable didn't get hot

@pontus1293 2 жыл бұрын

Hello, how much space does this printer need? In depth and width?

@retsetman9698 2 жыл бұрын

Hi, roughly 60x 50x 75 cm (width, depth and height). These are max values btw and include spool holder and filament

@vamshikrishna9481 2 жыл бұрын

Does it have filament refueling option?

@retsetman9698 2 жыл бұрын

It has pause and filament sensor. that is, if the filament runs out during printing, the printer will pause and at that time filament can be filled again

@vamshikrishna9481 2 жыл бұрын

@@retsetman9698 I'm looking for a similar option but with icons on screen for refueling like the mks tft screen

@neildarlow 2 жыл бұрын

There is a setting to enable a M600 (filament change) feature which works through the touchscreen.

@vamshikrishna9481 2 жыл бұрын

@@neildarlowwhat you're saying is through Mcode but i need icon like MKS TFT display where we have separate icon for refueling

@siegfriedschlag4353 2 жыл бұрын

👍💖🔔Guten Abend, freue mich sehr über dein tolles Video👍wünschen dir ein schönes Wochenende, bleib gesund, see you later. Liebe Grüße Siggi und Marianne 💖🔔