Hey guys 🤘 in this video I will be reviewing the Bishop Wand "SHADER" leave a comment below of what you thought of the video or if you have any questions! get your wand here bishoptattoosu...
Пікірлер: 55
@francovescovi68584 жыл бұрын
Just happened to stumble across your review, well said, you mentioned just about everything that we would have said if we did this video, very observant, thank you.
@CoreyHollins4 жыл бұрын
Your welcome!! 🙏 really enjoying the the wand! It’s pretty much my everyday machine.
@matsuoSonata2 жыл бұрын
Best review for the wand shader, everything i wanted to know is in here. Thank you!!
@wi_wi_wAaA2 жыл бұрын
Love how your hands look with the gloves 🤤😍
@user-gl2qs3ew6b2 ай бұрын
2:50 Nice neck tattoo 👌😎
@KarlVinceCasitas Жыл бұрын
❤❤❤
@AlohaINKTattoo4 жыл бұрын
Aloha, I've been using the wrap technique you use in the video. Wanted to see if you're cutting the corner of the machine bag, or if you're leaving it and pushing cartridge through it. I'm cutting the corner.
@CoreyHollins4 жыл бұрын
AlohaINKTattoo Aloha! What I’m doing I’m cutting the corner as well. I think in the video I cut the bag before I started filming it.
@AlohaINKTattoo4 жыл бұрын
@@CoreyHollins Thank you braddah
@davediaz813 жыл бұрын
what a nice complete review!
@AidenCassaroArt3 жыл бұрын
Loved the video! What would I need to get with the Bishop Wand Shader? I am a classical traditional artist who wants to try out this medium. Any advice from anyone would be appreciated!
@2shadywitit5464 жыл бұрын
I usually use a 3.5 bishop v6 but been thinking bout getting a wand the packer , i usually do black n gray n some color. Do u reccomend the packer for that type of work.??
@panitattoo44434 жыл бұрын
Hi, you have recommended 8-10 Voltage. But the voltage is recommended by builder is 6-8. I work with bishop wand packer. I think 6-8 it is not enough. What do you think?
@CoreyHollins4 жыл бұрын
I use the wand shader. But I run it at 7,7.5 and 7.8 volts depending on what I’m doing. I’ve turned it up to about 8.5 before and it’s ran solidly.. I would say it depends on what type of cartridges you are using too
@jasonvaughan85243 жыл бұрын
Good review👍
@Tattitoot5 жыл бұрын
Thanks for the review, ive been wanting the packer but i usually line with coil and pack/shade with rotary, do you think the packer would be a good combo of the two? Thanks
@CoreyHollins5 жыл бұрын
I think so. The shader I’m using is strong enough and the packer is even stronger of a hit and has a 4.2 stroke length. סוסיתא בר susita bar
@crislopezart84825 жыл бұрын
Between the wand and the spectra xion what would you reccomend more?
@CoreyHollins5 жыл бұрын
Well I would say it depends on what your wanting? I like the wand shader because it seem to work best with how I shade.. but the xion is overall well versed in different applications like color packing as well as lining etc.. the wand shader fell short for me when trying to push heavy line weights a little bit bishop make a wand pack which is said to cover Packing, shading, line work.
@chloewong48053 жыл бұрын
How do you adjust the needle depth on the machine?
@Guts_cr1tikal4 жыл бұрын
hi man, how would you describe the give on this machine? just slightly so you barely notice it or enough to make it a super soft hitting machine? thanks 🙏 also a fantastic video really high quality 😊✊🏼
@CoreyHollins4 жыл бұрын
Balli Tattooer it’s definitely softer than what I thought it would be which is nice! But I can’t really push any liners bigger than a 11rl really well do to that.. but great for building up shades I’ve used all kinds of cartridges now and now I use black claw and haven’t had any issues even at using it almost a year later
@Guts_cr1tikal4 жыл бұрын
@@CoreyHollins thanks man, I already got the packer and absolutely love it for lines and colorwork but not so much for shading...a bit too much for me 😂 but I really like the basic design concept behind the wand machines....so I was thinking about going for the shader as well
@nickrodriguez16285 жыл бұрын
Does it run smoothly or u can feel it on your hand barbietion
@CoreyHollins5 жыл бұрын
Nick Rodriguez it’s very smooth there is minimal vibration and noise
@ThatTattooGuyOfficial5 жыл бұрын
That's a bummer that it doesnt have changeable stroke. Looks cool tho
@CoreyHollins5 жыл бұрын
Seventh Trumpet Tattoos I thought the same at first but I do like the shader a lot. I understand why they chose to go the route they did. But Franco said that these machines are meant to run a specific way.. Definitely a cool machine
@manostoumpakakis70834 жыл бұрын
No machine of Cheyenne have changeable stroke thought but they work perfect..and the bishop wand machines seems very good 🤔
@cookingwithsiri36784 жыл бұрын
What kind of needles work best with bishop wand?
@erolbagins99215 жыл бұрын
How i remember i saw on ther site that they gona sell this maschine with two motors included!!!!!
@CoachJara5 жыл бұрын
Not true ,fake news
@yulekim58424 жыл бұрын
Question. I'll buy wand or terra for packing and lining. I think wand is short and lighter then terra, i dosent use those, what machine do you want to recommend?
@CoreyHollins4 жыл бұрын
KIM SANG YOON it’s hard to say I mostly still use the wand over many of machines but I have been using some of peaks machines they have been making as well. Also wanting to try out the flux soon
@osakabinladen4 жыл бұрын
Corey Hollins don’t waste your time on the Peak Matrix pen. Biggest waste of my money ever
@darcyrobinson87543 жыл бұрын
If anyone has used the bishop packer or the Valhalla Axys which do you prefer?
@christopherpayne72023 жыл бұрын
Packer however I might be bias because I like the grip of the wand verse the Valhalla
@gabrielleballard39825 жыл бұрын
Is the hit(softness/hardness not the stroke) adjustable?
@CoreyHollins5 жыл бұрын
Gabrielle Bonfiglio unfortunately not. The longer the stroke is the harder it hits. The shorter the lighter of a hit. But I will say 3.5 is a good all around stroke with this shader I’ve done a ton of tattoos with it so far and it’s great
@adrianhuitron87723 жыл бұрын
I want their battery but they sell out so fast .....
@BaldR683 жыл бұрын
The kwadron old type gives issues
@davenomadsantos5494 жыл бұрын
is there a way to adjust the needle because once cartridge is inserted it hangs out a bit much
@energiesandvibration3 жыл бұрын
You unscrew the top part a little
@sergioduromusic5 жыл бұрын
is it hit direct drive like sol nova? or is like another kind of hit? or is it have the tipical inside disign of mostly of pen tattoo machines?
@JonPoulson4 жыл бұрын
sergioduromusic it has the bar similar to the stylus machines inside. Quite different than other pen style machines. That give gives it a much smoother hit. Just my opinion. I never liked any other pen machines, but these bishop wands are my daily machines since I got them a couple months back.
@sergioduromusic4 жыл бұрын
@@JonPoulson i guess the motor is the same or very similar to the fantom bishop in the shader version, the cam is the same as the bishop fantom but turn it in the opposite way , it just look like a unibody fantom machine , diferent hit because of the shorter and angled hitter but pretty the same xd i have the fantom i never try the pen, in the future i will try it heh, bishop is a good brand
@JonPoulson4 жыл бұрын
sergioduromusic it’s quite a bit different than the bishop phantom... I used that quite a bit. It’s a customized motor similar to that one, and the internal setup is the same as stylus machines original, not the T2, including the bend in the bar “push rod”. But there is no comparison to the phantom the way they both run pretty different.
@sergioduromusic4 жыл бұрын
@@JonPoulson I appreciate the information, thank you man
@mylescritchley58355 жыл бұрын
One clip cord sleeve over it bend it over the end. Tape it wrap it and it’s done. You made it look so fiddly haha
@CoreyHollins5 жыл бұрын
Myles Critchley I could see that working.. I just like the two half’s not connected by a barrier so I can deal with less twisting of the barrier when adjusting my needle depth with this machine
@laurtoma14 жыл бұрын
Like
@dennychristinaurie49645 жыл бұрын
Waste of money get a hummingbird bronc super dope and better price I would not pay for the name wast of money for real just saying god bless you tho....
@CoreyHollins5 жыл бұрын
I’ve seen little about the hummingbird but I’ve heard good things
@francovescovi68584 жыл бұрын
Corey Hollins Then when the hummingbird breaks down since it’s made in China, there’s no customer service, you end up buying three in the course of a year which adds up
@frogynewlife4 жыл бұрын
what you pay is what you get ...my first machine I used before 6 years was a bishop capo 3.5 stroke and still have it without need of service ...only lubricant and that’s it ...of course the last couple of years is not my daily machine cause I like to try new machines ,for now I use a spektra xion and I’m more than pleased and soon I’ll get one of wand machines ,maybe the liner beast ...tattoo machines from major brands are like investing money for me...