Black Widow Motorcycle Ramp |

Рет қаралды 13,430

Жыл бұрын

Clem is reviewing the Black Widow Motorcycle Ramps for use with his Heavy Harley Motorcycles. Is it strong enough to handle the Big Limited?
#harleydavidson #motorcycleramp #productreviews #motocamping #twoups #2up
This video is not sponsored. Some product links are Amazon affiliate links which means if you buy something we'll receive a small commission. This helps support my channel so I can continue to make content like this.
Products in the video:
Black Widow Motorcycle Ramps - amzn.to/3OBRCGA
Why I Ride Video
#WHYIRIDE
• #whyiride | WHY I RIDE...
2022 Riding and camping in Glacier National Park
• GIT On The Road | PART...
OTHER PRODUCTS ON OUR BIKES:
2013 Street Glide - "The Bumble Bee" Parts
Ciro Floorboard Highway Peg Mounts with Black Arm - amzn.to/3OEf4D
Ciro® Rail Floorboard - amzn.to/3rPcdhD
Ciro Bag Blades LED Lights, Fits '10-'13 FLHX & FLTRX Models, Amber 40029 - amzn.to/3QnYkBa
2020 Limited - "Black Pearl" Parts
Ciro Floorboard Highway Peg Mounts with Black Arm - amzn.to/3OEf4D2
ASR Floorboards by Ciro® (black) for Harley Davidson motorcycles- amzn.to/3OFyMyq
Ciro Bag Blades Low Profile LED Lights '14-up w/o Controller, Amber 40009 - amzn.to/3QrgFgY
Ciro LED Light Filler Panels '14-up Harley-Davidson Ultra & Road King Motorcycle - amzn.to/45eyCDg
Custom Dynamics Dynamic Lower Fairing Inserts for Harley-Davidson Motorcycles - amzn.to/3YlTZjP
Custom Dynamics Saddlebag LED Latch Lightz for 14-22 H-D Touring - Smoke - amzn.to/3Ol8uQD
Custom Dynamics Low Profile ProBEAM Tail Light - Smoke with Top Window - amzn.to/45ajxCQ
Memphis Shades Black Opaque Hand Guards MEB7217 - amzn.to/47hLMkQ
Riding Support Gear Sena 30K Motorcycle Bluetooth Headset Mesh Communication System with HD Speakers, Dual Pack, Black - amzn.to/3rPMi9v
Shoei Neotec II (Clem) Helmet (X-Large) (Matte Black) - amzn.to/3KoPDmt
Shoei Neotec II (Roxy) Helmet (Small) (Matte Black) - amzn.to/3DETyYn
Communication, Video & Sound Recording:
DJI Wireless Microphone - amzn.to/45I0noq
GOPRO HERO 10 Black - amzn.to/45KJh9C
GOPRO HERO 11 Black - amzn.to/3r7htxe
GOPRO Media Mod - amzn.to/3RcrF1O
GOPRO Hero 4 Silver - amzn.to/3PdesDo

Пікірлер: 102

@danielhayden6761 7 ай бұрын

Hi from St.louis. I've been thinking about buying this ramp, you're video helped my decision alot. Also, making a front wheel device is a great idea.

@clemgriffis3446 7 ай бұрын

Glad it helped! Thanks for taking the time to comment and share your thoughts. I appreciate it when folks find value in what I am putting out there. Ride safe and “load safe!”

@tex9280 3 ай бұрын

Like these ramps May all your days be Harley days 💪🖤🧡🖤🧡🖤💪 Safe travels 🙏♥️🐾🐾🇦🇺

@clemgriffis3446 3 ай бұрын

Thanks Tex… Appreciate the positive vibes coming from a Harley brother… Thanks for watching and commenting!

@fabianlara333 5 ай бұрын

Great detail video. I needed that to make sure i made the right purchase. Thankyou

@clemgriffis3446 5 ай бұрын

Glad to help and thanks for watching! I have a link in the video if you choose to buy that route. No extra cost to you on amazon.

@HomeTech_Pro 2 ай бұрын

That middle one moving and you showing that detail , You are a great guy Sir , Much respect ....... I receive my black widow ramps tomorrow , I will be using 3 straps !!!!

@clemgriffis3446 2 ай бұрын

Better to be safe than sorry with extra straps. Hey, Thanks for the kind words and glad you found value in the video content we are producing! Happy “Loading” and Happy Riding my friend. Hope you subscribe and hope you bought through my affiliate link, no extra cost to you. Thanks again!

@CruizinWithTheCarsons 4 ай бұрын

BY FAR the most informative and real world video regarding these ramps. I'm so glad I found your video. You did an amazing job covering every aspect of these ramps. I've been on the fence about them as my Street Glide is a big investment. Thank you for the video and for installing confidence in me for making the purchase of these. Outstanding job, sir.

@clemgriffis3446 4 ай бұрын

Greg, your comment is very much appreciated, thanks for the kind words. I am one who tends to study out purchases in great detail especially for a purchase like this. These large bikes cost too much to take unnecessary risks. My conclusion is to study it out, make the purchase but even more so… prepare, prepare, prepare to load properly… the very best load angle you can find even if it is only slight to give the most confidence when loading. Thanks my friend. If you decide to purchase, I would appreciate it if you would go there the affiliate link in the video description. I recently setup my only affiliate program. Hope you subscribe and follow along with other motorcycle content I am working on!

@SailingGrace Жыл бұрын

New subscriber from the Savannah, Ga area. Love your videos, friend. Found your channel looking up info about the HF lift and wheel chock. About halfway thru this video I thought, "I bet his pucker factor is pretty high", and BAM, you said it. Lol.

@clemgriffis3446 Жыл бұрын

Robert, I grew up in Brunswick, down the road from you. Welcome aboard my friend! Now all the viewers will know where I picked up most of my euphemisms. Check out my #whyiride video and you will likely be able to relate to how ended up loving motorcycles. Thanks for watching and subscribing. I will be posting some new video very soon on a recent trip to the Sturgis area this past May instead during Rally week.

@sharonhirsch1173 5 ай бұрын

Thanks for the review now I know which ramps to buy.

@clemgriffis3446 5 ай бұрын

If you do decide to buy the ramps, hope you go through the amazon link I have in the video notes. No extra cost to you but it does help my channel grow. Thanks for watching!

@tomniland9519 10 ай бұрын

Clem, I think you did an outstanding job loading and unloading your bikes. I’ve used these for a trip to Daytona and it is not for the faint of heart but they work very well. Great job!

@clemgriffis3446 10 ай бұрын

Thanks Tom, I did learn a valuable lesson about where to attach the straps. They should be attached to the center ramp for sure. Luckily I avoided a potential mishap. I also got a comment with a concern about load on the tailgate and the cables attached to the tailgate. I feel very comfortable with the tailgate and its ability to carry the load.

@ramgarcia2803 11 ай бұрын

I have been in the market for some ramps and your video really made my decision to buy these ramps. I recently took a trip to Washington State to visit my folks and wanted to take my 2020 Indian Chieftain Limited but didn’t have the correct ramps. So my bike stayed home. Thank you again for your input and I will be purchasing the Black widow ramps.

@clemgriffis3446 11 ай бұрын

Thanks brother, I have no affiliation with this company and I just share my honest opinion and experience! Look out when my subscriber-ship gets big enough to monetize and then I might get sucked into the more biased opinions on products… oh I hope not. I have to stay genuine and true to myself. Keep on riding my friend!

@johnstein2206 4 ай бұрын

Great video. I have been looking to purchase some ramps and this video just made up my mind on which ones I am purchasing. Thanks, John

@clemgriffis3446 4 ай бұрын

John, thanks my friend for the positive comment. I like the ramps and the biggest lessons learned is take plenty of time to determine the best truck orientation to give the flattest approach angle and second… tie-off this straps to the center ramp section to the truck bumper hitch very well. Hey, if you do buy, consider my Amazon link in the vid description. No extra cost. Thanks again and hope you subscribe!

@johnstein2206 4 ай бұрын

I was confused by the center ramp moving being you put the rod through them all. Is there not bosses on the center ramp for the rod to go through? If there was then strapping could be done on any of them. Just wondering. Haven’t purchased yet of course. Lol.

@clemgriffis3446 4 ай бұрын

John, there is the aluminum rod that slides through all three sections that does tie them together very well latterly. There is a little more “play/slop” in the direction of travel. That is what I was attempting to show in the video when I noticed the slippage on my tail gate as the bike’s back wheel is pulling the center section away from the truck as you ride up. Great question!

@johnstein2206 4 ай бұрын

@@clemgriffis3446 thanks for the explanation. I’ve had that happen on wooden ramps. Learned to tie them to the truck also!! Scary realizing what could have happened. Thanks again. Have a great day and keep riding safe.

@bmacias Жыл бұрын

Thanks for the review. I would recommend that you get some flat steel bars to secure the tailgate (attach where the cable holds the tailgate on each side) won't pancake open with the weight of a heavy bike held by two cables on the side of the tailgate.

@clemgriffis3446 Жыл бұрын

Great idea, thanks for sharing. Basically it creates a rigid extension of the bed surface that does not bounce, correct?

@bmacias Жыл бұрын

@@clemgriffis3446 It will prevent the cables on each side of the tailgate from being overstressed and breaking.

@sfzx54 5 ай бұрын

Look up DG Manufacturing tailgate supports guys they fill the need

@johnstein2206 4 ай бұрын

@@sfzx54 great idea however $84 is a little steep for a couple pieces of straight steel with a slot cut in and a pin welded on. Just saying. I’ll be making some for myself being I’m a machinist. Thanks for the info however.

@sfzx54 4 ай бұрын

@@johnstein2206 Well john I bought mine at least 20+ years ago actually 1997 so it appears they have gone the way of everything else out there and it seems to be double plus some LOL

@garywheeler2055 6 ай бұрын

New subscriber from Canada. 🍻🇨🇦

@clemgriffis3446 6 ай бұрын

Awesome Gary, thanks for watching and subscribing!I Appreciate you letting me know where you are from as well. Hope you find the content interesting!🤔

@SilentWatcher594 10 ай бұрын

I've been eyeballing these ramps and have been watching videos,,,yours most recent. Im now in the process of getting a set. I haul my Adventure bike mostly,,,but i have a big cruiser that weighs 900lbs wet. Its very apparent these ramps can handle the load. The truck is new, 6'4" bed and air bags in the coil springs, so I am not concerned with that. It also appears i can use these ramps to load an ATV. BTW...am in Minnesota,,,maybe see ya on the road! Thanks for the video.

@clemgriffis3446 10 ай бұрын

Glad you got some useable information out of the video. I was just looking for a good set of ramps for my two bikes that I know are quite heavy. Like you, I did my research and I wanted “SAFETY” and reasonable quality and I didn’t want to break the bank. If I did not find something I was happy with, I was resign to the possibility that I would not buy anything and resort to a trailer as a last choice. I found these black widow ramps and decided it was the way to go and I was not disappointed. I took the bike to the Sturgis area in my pickup Memorial Day week and thoroughly enjoyed riding and the convenience of the new ramps. (See kzfaq.info/get/bejne/jZp0dtV63NPMnY0.html) My review and comments are always absolutely genuine. I cannot watch or put up with disingenuous folks in videos. I say all that because a few months later, my viewership increased to the 1,000 subscriber threshold and I was able to monetize the channel and become an Amazon associate which gives a small stipend when someone buys an amazon product that I give links to in my video description. I have recently in the past 2 weeks, added the amazon link in the description for the ramps and a few other items. I still refuse to make non-stop product review videos but just for full disclosure, I now could benefit if you buy through my amazon link. Thanks for taking the time to comment and give the valuable feedback.

@donthornton7528 5 ай бұрын

I just brought the ramps myself (12ft ones) thanks you for your video still haven't drove up them yet but glad i watch your videos im wheeling Harley Davidson FLHTCUI ultra classic

@clemgriffis3446 5 ай бұрын

Don, great! Glad the video was helpful. I really appreciate you taking the time to watch and especially comment. Comments and “Thumbs up”s are how I am trying to get the video out there and communicate with like-minded folks. Thanks Again!

@DerekM-er6hp 2 ай бұрын

Hi from Fort McMurray Alberta 🇨🇦. Thanks for the review. I have been contemplating getting these ramps for my bikes. Wasn’t sure how they’d stand up. But seeing how confident you are with your heavy bikes I’m sure they’ll handle my Heritage and Fatboy just fine. I’m looking at the 10’ as well. Hoping that they are long enough so my bike doesn’t bottom out. My truck is a F450 so even at stock height it’s pretty high. Fingers crossed. I also like your idea with the wheel chock on the 2x4. Normally I just snug the tire up against the truck bed. But I like your way better. I’m gonna try that myself. Thanks again for the review.

@clemgriffis3446 2 ай бұрын

Derek, glad the video answered some of your questions about the ramps. Thanks for the comment and taking the time to watch our content. I think you will appreciate the ramps if you decide to buy them. What I have learned is you can’t go at loading your bike “half-hearted”. You have to do all the right things in preparation for the best angle available, tie-down the straps properly and then commit when ride up. If you find that Amazon is your best option, please use my link at no additional cost. If you find a better purchase option, please take it as these are not a cheap purchase. Take care and “ride on!”

@alphafort 5 күн бұрын

Hey bro,,,, Asian here,,,, and big ZZ Top fan !!! Good review! Edit= Would you've preferred them a tad wider?

@clemgriffis3446 4 күн бұрын

Actually they are plenty wide as they consist of 3 pieces to make up the width. I plan to use them next week to take my bike on a long trip and feel confident using them. Thanks for asking!

@usmcshepherd9951 Ай бұрын

Just found your channel…looking forward to learning more about you all…I live in Iowa, retired USMC MGySgt…Looking to take my Harley back to the black hills as well to ride those great roads too. Considering a ramp to ride the bike into the back of my F250. How do you carry them in the back of the truck when your bike is loaded so they don’t come in contact with your bike? I have a ‘22 Road Glide CVO that I really don’t want anything touching:) Was going to go with a trailer but trailering something is such a PITA if not absolutely necessary.

@clemgriffis3446 Ай бұрын

Shep, thanks for the questions. I use ratchet straps to tie them up against the inside of the bed sidewalls. I have added a couple of Eyebolts in the front and back of each side wall. The ramps sit on top of the wheel wells and then strap in. I understand that if the ratchet straps come loose, the ramps would fall against your bike while driving down the road. Today is Memorial Day 2024, we used the ramps to take the bike to Rushmore camping area this time in 2023 and all went well. Checkout a couple of videos I posted on that trip.

@teixiong7989 11 ай бұрын

Great video. Thank you for sharing. It certainly gave me more confident in going this route. What size is your truck bed?

@clemgriffis3446 11 ай бұрын

It is typical 6' 7". With my front wheel in a Harbor Freight wheel chock, the rear axle is almost directly above the tailgate hinge. Check out my recent Sturgis video to see more about the ramp in actual usage from UT to SD.. kzfaq.info/get/bejne/jZp0dtV63NPMnY0.html

@bradhirvela9568 Жыл бұрын

Very informative review Clem. I'm guessing once you get the bike in the truck bed you are then able to store the 3 ramps in your truck bed and find a way to strap them secure? I'm in Palmetto Fl with great winter riding, but we travel to our cabin in west NC mountains from June through October. I ride the bagger up there and back, about 600 miles one way. Thanks for the great review.

@clemgriffis3446 Жыл бұрын

Brad, really appreciate your comment and kind words. Yes, the ramps can be 2 sections on one side and 1 section on the other. I strap against each wall with ratchet straps to keep away from the bike. I expect to pack a number of other items back there like a cooler and a few other items when we go over to Rushmore for Memorial weekend. I use to own a cabin lot in Blairsville GA a number of years ago when I lived and worked in Orlando, but never built, ended up selling. I have ridden in those mountains on several occasions, really enjoyed it. Actually have a video on my channel while riding there on one of our trips. kzfaq.info/get/bejne/opqdn9WqtKqqhnk.html Hey, hope you subscribe if you are not already subscribed.

@johannzitz1357 9 күн бұрын

I would be a little worried about these tailgate support cables struts I’ve seen those broke

@clemgriffis3446 9 күн бұрын

I think I have seen a similar concerns within the comments for the video where I replied with the various working loads for the cables and the riding position of my back tire within the bed of the pickup. Sorry, I am a structural engineer and I tend to drone on, too much technical stuff, suffice it to say, I am good with the application and the truck/tailgate/cable combination I have. Everyone should be comfortable within their own setup for sure. Your comment is absolutely a good comment and well taken my friend!

@ZebraActual Жыл бұрын

Nice video. I been debating putting my Victory on the back of my truck or pulling it in a trailer up to Sturgis as the camping/riding all the way is getting old.. like me! lol! I got a couple of Harbor Freight ramps I used to pick it up when I first bought it and bring it home, but they didn't exactly fill me with confidence, but they did work.

@clemgriffis3446 Жыл бұрын

Zebra, I totally understand. I rode to Sturgis in 2021 and several other great places around the country. I recently just got back from a May trip to ride ride the Sturgis area away from August this time. That is why I put it on the truck. I have ridden hundred’s of thousands of miles all around the country and have nothing to prove to anyone. You don’t either my friend! Thanks for commenting and please tell me where is your home base.

@ZebraActual Жыл бұрын

@@clemgriffis3446 I'm located on the Florida/Georgia border.. northwest of Tallahassee.

@clemgriffis3446 Жыл бұрын

@@ZebraActual Very cool, I grew up and graduated high school in Brunswick, GA. Still have family there.

@Ali-iq4bb Жыл бұрын

You didn’t need wood. You could have used superstrut. It’s a Swiss knife. You can then add eye bolts for anchors….

@clemgriffis3446 Жыл бұрын

Ali, I assume you are describing unistrut or “superstrut” specific product from ABB for securing conduit and a million other things. I agree it has almost infinite applications. Ultimately I used wood as it is the cheapest thing laying around my shop and provides a good friction surface against the bed of the truck rather than metal against metal. Thanks for sharing your ideas and taking the time to watch and comment. I appreciate viewers and subscribers who have a passion for motorcycling and maintaining the bikes.

@kevinshack2004 2 ай бұрын

Great video. I like that setup. I do have a question when the middle ramp pulled back on your truck is there slack, when u insert the rods into the ramp that's let the ramp move back

@clemgriffis3446 2 ай бұрын

Yes, take a look at time 3:20 into the video and you can see about how much play there is between the rod and the pipe sections it goes through. Thanks for watching and asking good questions.

@kevinshack2004 2 ай бұрын

@@clemgriffis3446 still looks like a great setup

@bigesrac 9 ай бұрын

Great review! I just ordered the 12ft version based on the height of my truck. Any issues with the rear wheel on the tailgate while traveling? I kept hearing that the tailgate could bend.

@clemgriffis3446 9 ай бұрын

There are couple of comments previous that shared similar concerns. Have a look at my comments to guyconnell & vincentcarmelli where I tried to talk about the tailgate cables and the center of my rear wheel basically right above the hinge. I have had very good luck with this configuration, no deformation and stable ride. Thanks for the question.

@martymorgan3085 9 ай бұрын

I've considered these ramps, but I have a Ram with a 6" lift and 35's so I'm just not comfortable with attacking this method for hauling my RGS. Considering a Kendon now or similar "fold up" trailer.

@clemgriffis3446 9 ай бұрын

Hey, I really understand your concern. There is a certain comfort level you need to be able to haul your bike down a highway at higher speeds like you might see on an interstate highway. In my case and for many others, the bike is worth more than your truck. I can afford an enclosed trailer but currently have no place to park it at my house. I plan to pour an outside concrete pad and remove that section of my lawn in the near future and then buy a twin axle enclosed trailer that I want to convert to a camp/toy hauler. Thanks brother for watching the video and commenting. Hope you are a subscriber, we need the help to build the channel.

@ijaxon6675 4 ай бұрын

Better idea, put the bike in gear and use the clutch. If you let go of the brake, the bike moves, if you let go of the clutch in gear the bike doesn't move. Slightly use the clutch to descend. It's an ADV rider thing.

@clemgriffis3446 4 ай бұрын

Thanks for the reminder. Keeping in gear is certainly the way to go.

@boomer1197 3 ай бұрын

Nice video. Just subscribed. Question: Is your Silverado a Crew Cab or Double Cab? I can't tell from the video. I'm trying to figure out the bed length in term of where your rear tire is landing. Thanks!

@clemgriffis3446 3 ай бұрын

It’s just a double Cab with the shorter rear leg room. I think the bed is about 6 1/2 feet. My bikes’s rear axle sits about at the tail gate hinge. Good question, thanks for subscribing, really appreciate you taking the time to ask a question and watching the content we are putting out.

@boomer1197 3 ай бұрын

@clemgriffis3446 Excellent. I have a double cab too with a Bak Flip hard tonneau cover. I would probably have to remove the cover so my Ultra Limited would sit as yours does. When the cover is all the way up, there is about 4-6" of space to the front of the bed. That would probably put my rear wheel on the tailgate versus in the hinge crease. Not ideal in my opinion. Thanks for the info and be well!!!

@two-wheels7397 5 ай бұрын

Bravo! I just do not have the guts to do that.

@clemgriffis3446 5 ай бұрын

I will say that I my rear-end does “pucker” a bit riding up the ramp. One cannot go up or down half committed or you will get into trouble. There are enough “fail” videos out there with Luke-warm attempts. 😆. Thanks for watching and commenting. It really helps the channel.

@guyconnell2250 Жыл бұрын

I have always balked at using these types of ramps out of concern about deforming the pickup's tailgate or even breaking the cables that hold the tailgate. What are your thoughts on this?

@clemgriffis3446 Жыл бұрын

Guy, I understand your concern and I would never advocate anyone go a route they do not feel comfortable with. I know that the 3/16” steel cable on my Chevy tailgate has a breaking strength of 4,200 lbs and times (2 cables) theoretically has 8,400 LB breaking strength. Now with that said, the “working load” is calculated with a safety factor of (5) so the working load limit divides down to 840 LB for each cable.The Working load is the force the cable or lifting device a piece of equipment is subject to in an everyday working environment. My motorcycle back wheel (axle) is almost directly over the hinge line of the tailgate when riding and is subject to ramp load extremely infrequently. I understand the steel tailgate could be subject to deformation if a constant cycling load is exerted out of the edge of the tailgate. OK, I see a lot of eyes are rolling :) Enough of a Structural Engineer’s rambling… Ultimately, I am comfortable with the rare occasion I load either of my bikes in the pickup bed with this method. There is such a large safety factory dividing the breaking strength by 5 and the fact that I am exerting about equal load between two of these cables, I am comfortable. Again, this is just the call I have made and would not recommend anyone do anything they are not comfortable with. I hope you subscribe to the Channel and I hope I have not bored you to 😭. 😀 thanks for the question 🙋

@guyconnell2250 11 ай бұрын

@clemgriffis3446 I appreciate your thoughts. Given the price of fuel, I have considered hauling instead of trailering as a very viable option. With gas at over $4/gallon for premium, and 8-10 mpg pulling my trailer, it becomes a very important consideration.

@danwinters3948 5 ай бұрын

nice ramps but for a little more you could have a trailer that would be easer to load .

@clemgriffis3446 5 ай бұрын

Dan, yes no doubt about that. The trade-offs are endless like how convenient is loading vs. how convenient is a trailer to manage at my camping destination… ideally I suspect I will own both. Thanks for the comment and taking the time to watch the content. Hope you find it worthwhile to subscribe.

@SColmant 6 ай бұрын

I see those ramps come in 8, 9, 10, and 12’. Which one do you have? Also, are you able to fit the ramps in a 5’5” bed with the bike in the bed and the tailgate down?

@clemgriffis3446 6 ай бұрын

Mine is a 10 footer. I believe there is a link in the notes to an affiliate link. I think I was having trouble finding access to the 12 footer. They fit inside the pickup when folded over but I do strap both of them against one side’s wheel-well. Check out mine and Roxy’s subsequent trip to the Sturgis area spring of 2023 where we used the ramps for the first time. Thanks for the great question.

@clemgriffis3446 6 ай бұрын

Oh BTW, my truck bed is 6’ but the ramps should still load just fine in your truck bed. With tie-down rachet straps.

@SColmant 6 ай бұрын

@@clemgriffis3446 Thank you sir.

@birdmanbird10 Ай бұрын

THANKS FOR THE VIDEO. I WENT TO AMAZON AND THEY ONLY HAVE 9 FT TO ORDER....I HAVE A 2020 ROAD GLIDE...IS THE 9FT RAMP SAFE?

@clemgriffis3446 Ай бұрын

Mine are 10’, I don’t know that I would go any shorter. You may have to buy from Black Widow direct or from Discount Ramps to get the 10 footers.

@birdmanbird10 Ай бұрын

@@clemgriffis3446 Thanks for responding....BE safe.

@bruceandres3840 8 ай бұрын

grande prairie alberta canada

@clemgriffis3446 8 ай бұрын

Welcome! Thanks for sharing your location. Banff and Jasper is as far north as I have been on my yellow bike so far. I plan to ride further north when I retire soon. Take care and thanks fir watching our videos. Hope you subscribe.

@sixpath Жыл бұрын

Jump to 8:00 for the ramps

@clemgriffis3446 Жыл бұрын

Thanks for the index!

@508knucklehead 3 ай бұрын

Doesn’t that rod tie them all together?

@clemgriffis3446 3 ай бұрын

The rod ties them together laterally but there is still a fair amount of “play” length wise that is just enough to create a disaster if the tie straps are not connected to the center section. Perhaps I will do a short video expanding on this subject. Be on the lookout for a new ramp video.

@Recycledhooligan Жыл бұрын

I can see how this would be useful

@clemgriffis3446 Жыл бұрын

Thanks for watching Hooligan, now that the weather is changing I can get outside and create better content.

@vincentcarameli9870 Жыл бұрын

Is that a half ton pick up? I have a F-150 and a RGL. Do you know of any weight issues or handeling of your pickup?

@clemgriffis3446 Жыл бұрын

I have a Chevy Silverado 1500 (1/2) ton and absolutely no issue with handling. I brought my bike across country from Ohio to Utah and no problem. If you have a Harley, I would recommend that you disable the motion security motion sensor (“Transport Mode”) that causes the warning lights to continue flash and will eventually kill your battery. Thanks for the question. What state/province/country are you in? Hope you will subscribe if you are not already. Thanks

@wayneglabais1208 Жыл бұрын

Clem, what box length is your Chevy? Any issues with the weight of the bike rear wheel sitting on the tailgate. I have the Black Ultra as well and thinking of transporting this way, I have not purchased a truck or ramps yet.

@clemgriffis3446 Жыл бұрын

@@wayneglabais1208 I just have a 6 foot bed. With the Limited front wheel in the HF wheel check, the rear wheel axle is directly above the tailgate hinge. I had no issues with the street glide on a trip from Ohio to Utah. Really not a problem.

@wayneglabais1208 Жыл бұрын

Ok, so the rear wheel is only partially resting on the tailgate then

@clemgriffis3446 Жыл бұрын

@@wayneglabais1208 Yes, Have a look at 10:28 in the video for a good side shot of the rear wheel of the street Glide and 12:16 of the Limited.

@stevet8747 11 ай бұрын

A mans garage is never big enough, you have a good size for all those fun toys.

@clemgriffis3446 11 ай бұрын

You got that right! But now am I buying table saws and miter saws to build furniture and the poor pickup truck is the odd toy out…

@Ali-iq4bb Жыл бұрын

Go down in gear while holding clutch in n out

@clemgriffis3446 Жыл бұрын

Thanks for the recommendation. Hope you find the content worthy of subscribing!

@vswebster 5 ай бұрын

Where do you put the ramps when the bike is in the bed?

@clemgriffis3446 5 ай бұрын

I have a couple of extra ratchet straps I use to tie them collapsed on their side on top of the wheel well. As long as you cinch them up good with a QUALITY SET of ratchet straps, you will be good to go. Thanks for the question.

@clemgriffis3446 5 ай бұрын

We actually did this on a trip to the Sturgis/Mt. Rushmore area this past Memorial Day. We have a video to Sturgis in that time frame I published about 6 m on this ago. Check it out. Hey if you do decide to buy these ramps, check out the affiliate link in the description section of the video. Thanks again for watching!