workingwithiron presents How to forge round Drifts #4 in the tool making series. Made from Mild steel as they are consumables. Nathan Baker will take you through step by step process on how to forge, no step skipped.
Пікірлер: 79
@gregfarley57375 жыл бұрын
Well done! I can't thank you enough for not having ridiculous music. Also, thank you for getting right to the point of the video. Great job.
@sladewilson89293 жыл бұрын
Thanks for the no nonsense tutorial on this subject and straight to the point I really appreciate
@tylerjenkins917 жыл бұрын
Your videos are some of the best instructional videos on youtube. Keep up the good work!
@tomcarlson3244 Жыл бұрын
Great demo on making a hot cut chisel. My attempts I didn’t spend enough time dressing the cutting taper.
@steelpennyforge51527 жыл бұрын
As a new smith I am really digging the videos on tool making. I will be using them all to make all the tools I need! Thanks for the outstanding instruction)
@workingwithiron7 жыл бұрын
No worries, there will be plenty more, got a few more to do then we will get onto projects so we can use them. Thank you!
@ugo72953 жыл бұрын
Nice job Nathan, thanks.
@jojomama47877 жыл бұрын
I'm kind of old to start doing this type of work but my background as a welder/machinist makes it almost natural.of course tools are the first thing anyone needs so your videos/tutorials are very much appreciated,thanks so much!
@workingwithiron7 жыл бұрын
No i must Thank you for watching them, Have to start with tools for sure!
@gregjordan80607 жыл бұрын
If you aren't a teacher you should be, I watch a lot of other videos and they don't explain the process the way you do, maybe it's just me but I sure do appreciate your videos
@andytree0017 жыл бұрын
second that, your relaxed style is easy on the ear and makes the information offered much easier to take in.There are others making vids of the same genre that just leave me with a headache.
@workingwithiron7 жыл бұрын
Thanks Greg, means a lot that does! They are a lot longer than most but if its instructions on how to make something then its easier to show as we go along rather than trying to get a shorter video for more views, its never about the views for me, more so to teach people that can't get to classes, or to a tutor or for people in countries where there are no smiths that will teach.
@workingwithiron7 жыл бұрын
Thank you! I find the same thing, there are great entertainers out there doing this but its not about me, rather the craft itself and process. Glad you like the way they happen! Cheers!
@paulorchard79603 жыл бұрын
Best explanation and how to on drifts I have seen! Upsetting the centre makes perfect sense when you explain scale and forging loss! Thanks Nathan, I know a lot more now than I did 20 minutes ago!
@bigoldgrizzly9 ай бұрын
Also you are drifting a hole in hot steel. If the drift is oversize, then so will the hole in the hot steel be. If you have the swell just right, then as the workpiece contracts the hole will too, hopefully being spot on the desired hole diameter when cold.
@workingwithiron9 ай бұрын
Hence the upset in the drift. I've not watched this back in a long time but I'm sure I mentioned this.
@bigoldgrizzly9 ай бұрын
@@workingwithiron It did get missed in the video Nathan, though you did refer to it in one of the comment replies. It is easy to miss things that are second nature to you, when demonstrating and doing the talk through at the same time - I couldn't do it
@henryraynald79477 жыл бұрын
Thank you Nathan for another outstanding video
@brianpurtle37467 жыл бұрын
your videos there great thanks for all the info it's really helpful having the step-by-step instructions
@doug817th7 жыл бұрын
Excellent, as usual. Thanks for he hard work.
@paulus2810597 жыл бұрын
Hello Nathan, great videos mate. I do hope you do loads more, you've got a nice, calm, easy going style. I've just finished doing up a small farriers type forge and adding a free-standing base to it as it was originally just a table-top type. It'll be good to get back into 'smithing and fabrication again as it's been some years since I last did this sort of work, so I'll be watching all your vids for inspiriation and perspiration as well. Kind Regards mate.
@lenblacksmith85597 жыл бұрын
Well done mate, Nathan you explain things so well, not like other video's they just play music, don't tell you anything. big tick here mate.
@traolachachall5185 жыл бұрын
Excellent blacksmith and teacher
@keithcarney11755 жыл бұрын
Thanks for making your videos.
@nightschoolblacksmith62197 жыл бұрын
Wonderful! Thank you Nath.
@WG18077 жыл бұрын
Good information again. Thanks for the upload.
@workingwithiron7 жыл бұрын
thanks again!
@curtroche53927 жыл бұрын
Thankyou for the excellent info.
@uvmetalworkingfabrication18737 жыл бұрын
Thanks for sharing. Using mild steel is new for me.
@workingwithiron7 жыл бұрын
You are welcome, Mild steel is a wonderful material and its Cheap!! Cheers!
@stephenchilingirian51836 жыл бұрын
Awesome video!!! Thank you so much!!!
@joemcnally13487 жыл бұрын
Thank for producing this and your other videos, its great to be able to watch every step in your process. I have found a lot of your work helpful for learning. I wonder if i might suggest a topic for a future video, I have been rely struggling to find good understandable information of the steel its self and what steel to use for tools and such. I've probably been looking in the wrong place but faced with pages of designations makes my head spin. anyway I've had trouble with it and maybe others ho are just starting are in the same boat might be a good one to put out there. Thanks again for doing what you do man!
@bearshield71382 жыл бұрын
thank you
@starforged2 жыл бұрын
Always a great video. When you are making a square drift. Like on a railing, do you start with a round and then transition to a square drift? Or a hexagon shape like on a conveyor roll shaft.
@kentgordner71197 жыл бұрын
I have to agree with several of the comments. You are so patient with your teaching. I appreciate watching you because I can pick up so much more than others I have watched. I am mesmerized by the videos...lol. At the end of this video you talked about a bolster plate video for drifting holes, but I cannot find it. Can you help me out?
@RustyPearson6 жыл бұрын
Not sure if you found it Kent kzfaq.info/get/bejne/abl-lM1_uL6yc4E.html
@gig19587 жыл бұрын
Hello, Great channel!! Wondering what brand of hammer are you using? Looks a little like a farriers hammer.Long handle with an anvil and two initials mark on the side. Looking forward to the next installment. Matthew Onks USA
@Alistplay3 жыл бұрын
Love the name
@workingwithiron3 жыл бұрын
the name?
@Alistplay3 жыл бұрын
@@workingwithiron your name being Nathan, my name being Nathan. Just a little nod to someone with the same name am also doing some forge work myself
@workingwithiron3 жыл бұрын
That makes more sense 😂 it's getting a channel name change soon though 🙂
@randychom7 жыл бұрын
You stated that you harden the mild steel, can you explain how you do this or did I misunderstand? Thanks for this idea , tool steel is a lot of coin .
@lenblacksmith85596 жыл бұрын
I find my 8mm drift bends when drifting holes for tong boss.
@dougminnis1926 жыл бұрын
what length do you you start out with
@oljames16877 жыл бұрын
..By Upsetting the Drift. Does this allow the hole you are drifting to come back to a more normal size after the piece has cooled?? Say, you drift it with a 10mm drift and when the piece has cooled it's more like 8mm...
@workingwithiron7 жыл бұрын
Yes, you got it! Lets say you want an 8mm hole, you would use the 8mm drift that has been upset to around 9mm drift through then you should have a parallel hole of 8 1/2 - 9mm hole, when that cools depending on the colour of the bar when the drift is knocked out it should shrink back to just over 8mm, allowing an 8mm bar to pass through that hole. I will show it on the bolster plate video i am filming now.
@lenblacksmith85596 жыл бұрын
Nathan I made an 8mm drift and every time I went to use it it would bend, so gave it up. Do you think it might of been too long. What length would you recommend for a drift for tongs for rivet hole.??
@workingwithiron6 жыл бұрын
Lenblacksmith for a rivet hole I wouldn't recommend any drift, just your punch will do unless they are huge hinges. I explain in the video how long the drift needs to be, but what I didn't say was, the work has to be hot. They do bend, out of mild steel, if not hit straight, or the hole is too small, or too cold, or like you say, drift too long it could be that you keep hitting while the hole has cooled and the drift has been heated, without seeing your technique I cannot say.. 8mm drifting is small enough that if you can use your punch then do so. Hope this helps.
@lenblacksmith85596 жыл бұрын
Yeah Nathan, that helps a lot, and some great advice, cheers mate.
@kiksforge7 жыл бұрын
Very nice, as a part time job I do welding repairs for farmers and the amount of spring steel I have acquired from broken bale carriers and silage grabs is ridiculious at this stage, I find the steel, even un hardened makes really nice drifts, mild steel is far easier to shape and redress though.
@workingwithiron7 жыл бұрын
How lucky! They are amazing, like you say for drifts, such hard wearing and they shine up so well after a few uses. Whats a silage grab?
@kiksforge7 жыл бұрын
It's like a big mouth that fits on to the front loader of a tractor. Drive it into the silage pit close the jaws and it takes a "bite" out out of the silage.
@workingwithiron7 жыл бұрын
Aha i know what you mean! Thanks!
@basdejong15984 ай бұрын
I remember working with one during a 3-day-course that's made of a heat resistant hardened kind of steel (retains its hardness to temperatures of up to ~600°C), but that one was more like an eye drift for hammers and axes. Nonetheless, I assumed all drifts are made of such steel.
@workingwithiron4 ай бұрын
That'll be a red hot steel such as h13. But this channel is about showing you how to think outside the box. Hence mild steel drifts for small holes. As a finishing drift. Not a punch.
@brettwilletts7 жыл бұрын
Great video! inspired me to give it a go! i am a steel fabricator and am always drifting holes on steel flanges to line the holes up before bolting together. i normally buy a king dick drift spanner and cut the spanner end off and use them. you are using mild steel as the material, would i need to harden the drift after forging or would it be strong enough as it is?? great tutorial, keep up the good work.
@lenblacksmith85596 жыл бұрын
How long is the 6mm?
@MinistryOfStrings6 жыл бұрын
Lenblacksmith following
@shane41766 жыл бұрын
why do you upset the middle? you may of explained it but I didnt get it if you did. By the way love your videos great job!
@workingwithiron6 жыл бұрын
Rice Creek bushcraft example.... so I want to pass a 12mm bar through a 12 mm hole. The drift material is also 12mm. If I were to put a 12mm bar in a 12mm hole it would be tight, if it passes through at all. So I upset the middle of the drift so it is wider than the 12mm, only by a fraction. This opens the hole out slightly bigger than 12mm so the bar I want to pass through the hole has enough clearance to go through but not sit in loosely. Hope this makes sense!
@NKG4167 жыл бұрын
axe drift tutorial?
@genesmith92387 жыл бұрын
do you use these on a slot punch hole?
@workingwithiron7 жыл бұрын
yes, you can use it whenever you need straight hole, as punches are not parallel they leave a conical hole, so you will y=use a drift to make the holes parallel, usually punch slightly smaller then drift to final size. I will show you in the next vid which will be up tomorrow or sunday. Hope this helps!
@dougminnis1926 жыл бұрын
what pound hammer are you using
@workingwithiron6 жыл бұрын
Doug Minnis 1 3/4 lb
@randychom7 жыл бұрын
Sorry must have been mistaking or crossed up with another video, sorry. My mistake you don't say that.
@scottleft36727 жыл бұрын
im looking to make masonry chisels.....tungsten is so expensive it becomes precious.
@jakobpetrov17505 жыл бұрын
What does that mean upsetting
@workingwithiron5 жыл бұрын
Compressing the stock on itself to make it bigger in size/section.
@jakobpetrov17505 жыл бұрын
And whye does there have to be a swell on the punch ?
@workingwithiron5 жыл бұрын
Let's say we are putting a 10mm bar through a 10mm hole. If we drift the hole to exactly 10mm while hot, as the hole cools down it will contract and shrink being slightly less than 10mm so the swell takes it bigger than 10mm to counteract the shrinkage.
@jakobpetrov17505 жыл бұрын
@@workingwithiron oh ok i understan thank you
@markjordan45716 жыл бұрын
Do you run courses?
@workingwithiron6 жыл бұрын
Mark Jordan soon!! I'm in a shared workshop at the mo so it's difficult but looking at getting my own place to start teaching.
@markjordan45716 жыл бұрын
Working With Iron Nathan - Bristol? Let me know when you do - I'll pop over the bridge!
@stilltlrforlife6 жыл бұрын
13/16th is closer to 21 millimeters, and 12 millimeters is closer to 7/16th
@donaldasayers6 жыл бұрын
Great videos, please make lots more. And get yourself a coke forge.